Uncovering the effect of poly(ethylene-co-vinyl alcohol) molecular weight and vinyl alcohol content on morphology, antifouling, and permeation properties of polysulfone ultrafiltration membrane: thermodynamic and formation hydrodynamic behavior

Abstract

Various hydrophilic poly(ethylene-co-vinyl alcohol) (EVOH) were used herein to precisely control the structure and hydrodynamic properties of polysulfone (PSF) membranes. Particularly, to prepare pristine PSF and PSF/EVOH blends with increasing vinyl alcohol (VOH: 73%, 68%, 56%), the non-solvent-induced phase separation (NIPS) technique was used. Polyethylene glycol was used as a compatibilizer and as a porogen in N,N-dimethylacetamide. Rheological and ultrasonic separation kinetic measurements were also carried out to develop an ultrafiltration membrane mechanism. The extracted membrane properties and filtration capabilities were systematically compared to the proposed mechanism. Accordingly, the addition of EVOH led to an increase in the rheology of the dopes. The resulting membranes exhibited a microporous structure, while the finger-like structures became more evident with increasing VOH content. The PSF/EVOH behavior was changed from immediate to delayed segregation due to a change in the hydrodynamic kinetics. Interestingly, the PSF/EVOH32 membranes showed high hydrophilicity and achieved a pure water permeability of 264 L·m^–2·h^–1·bar^–1, which was higher than that of pure PSF membranes (171 L·m^–2·h^–1·bar^–1). In addition, PSF/EVOH32 rejected bovine serum albumin at a high rate (> 90%) and achieved a significant restoration of permeability. Finally, from the thermodynamic and hydrodynamic results, valuable insights into the selection of hydrophilic copolymers were provided to tailor the membrane structure while improving both the permeability and antifouling performance.

Key words： polysulfone; blend modification; ultrafiltration membrane; formation hydrodynamics; poly(ethylene-co-vinyl alcohol) copolymer

Conflicts of interest

There are no conflicts to declare.

Acknowledgements

This work was financially supported by the National Natural Science Foundation of China (Grant Nos. 22278318 and 21878230). Sania Kadanyo would also like to thank the China Scholarship Council (CSC) for their generous support and Mr. Sean Andersen from the University of Melbourne for his kind assistance.

Electronic Supplementary Material

Supplementary material is available in the online version of this article at https://doi.org/10.1007/s11705-023-2331-y and is accessible for authorized users.

References

1 Ercin A E, Hoekstra A Y. Water footprint scenario for 2050: a global analysis. Environment International, 2014, 64: 71–82

2 Issaoui M, Jellali S, Zorpas A, Dutournie P. Membrane technology for sustainable water resources management: challenges and future projections. Sustainable Chemistry and Pharmacy, 2022, 25: 100590

3 Noamani S, Niroomand S, Rastgar M, Sadrzadeh M. Carbon-based polymer nanocomposite membranes for oily wastewater treatment. NPJ Clean Water, 2019, 2(1): 20

4 Chu Z, Chen K, Xiao C, Ling H, Hu Z. Performance improvement of polyethersulfone ultrafiltration membrane containing variform inorganic nano-additives. Polymer, 2020, 1: 122160

5 Derouich G, Younssi S A, Bennazha J, Cody J A, Ouammou M, El Rhazi M. Development of low-cost polypyrrole/sintered pozzolan ultrafiltration membrane and its highly efficient performance for Congo red dye removal. Journal of Environmental Chemical Engineering, 2020, 8(3): 103809

6 Roy K J, Anjali T V, Sujith A. Poly(vinyl chloride) asymmetric membrane modified with poly(ethylene glycol): effect of additive concentration on the morphology and performance. Polymer-Plastics Technology and Engineering, 2017, 56(9): 1017–1025

7 Nataliia H, Pawale T, Li X. Asymmetric polymer materials: synthesis, structure, and performance. Polymer, 2022, 242: 124607

8 Guillen G R, Pan Y, Li M, Hoek E M. Preparation, and characterization of membranes formed by nonsolvent-induced phase separation. Industrial & Engineering Chemistry Research, 2011, 50(7): 3798–3817

9 Lonsdale H K. The growth of membrane technology. Journal of Membrane Science, 1982, 10(2–3): 81–181

10 Xu X, Yang Y, Liu T, Chu B. Cost-effective polymer-based membranes for drinking water purification. Giant, 2022, 10: 100099

11 Wu Q, Xie W, Wu H, Wang L, Liang S, Chang H, Liu B. Effect of volatile solvent and evaporation time on formation and performance of PVC/PVC-g-PEGMA. RSC Advances, 2019, 9(59): 34486–34495

12 Wu X, Xie Z, Wang H, Zhao C, Ng D, Zhang K. Improved filtration performance and antifouling properties of polyethersulfone ultrafiltration membranes by blending with carboxylic acid-functionalized polysulfone. RSC Advances, 2018, 8(14): 7774–7784

13 Zhou C, Hou Z, Lu X, Liu Z, Bian X, Shi L, Li L. Effect of polyether sulfone molecular weight on structure and performance of ultrafiltration membranes. Industrial & Engineering Chemistry Research, 2010, 49(20): 9988–9997

14 Lin Y C, Tseng H, Wang D K. Uncovering the effects of PEG porogen molecular weight and concentration on ultrafiltration membrane properties and protein purification performance. Journal of Membrane Science, 2021, 618: 118729

15 Ho C C, Su J F, Cheng L P. Fabrication of high-flux asymmetric polyethersulfone (PES) ultrafiltration membranes by nonsolvent induced phase separation process: effects of H₂O contents in the dope. Polymer, 2021, 217: 123451

16 Yin J, Tang H, Xu Z, Li N. Enhanced mechanical strength and performance of sulfonated polysulfone/Tröger’s base polymer blend ultrafiltration membrane. Journal of Membrane Science, 2021, 625: 119138

17 Peng Y, Sui Y. Compatibility research on PVC/PVB blended membranes. Desalination, 2006, 196(1–3): 13–21

18 Yu C, Gao B, Wang W, Xu X, Yue Q. Alleviating membrane fouling of modified polysulfone membrane via coagulation pretreatment/ultrafiltration hybrid process. Chemosphere, 2019, 235: 58–69

19 Wae AbdulKadir W A F, Yunos K F, Hassan A R, Amin N A, Baharuddin A S. Fabrication and performance of PSF/CA ultrafiltration membranes: effect of additives for fouling resistance and selective polyphenol removal from apple juice. BioResources, 2019, 14: 737–754

20 Li S, Cui Z, Zhang L, He B, Li J. The effect of sulfonated polysulfone on the compatibility and structure of polyethersulfone-based blend membrane. Journal of Membrane Science, 2016, 513: 1–11

21 Zhang L, Cui Z, Hu M, Mo Y, Li S, He B, Li J. Preparation of PES/SPSf blend ultrafiltration membranes with high performance via H₂O-induced gelation phase separation. Journal of Membrane Science, 2017, 540: 136–145

22 Mukri N I, Velayutham T S, Gan W C, Abd Majid W H. Miscibility and crystallinity study of poly(vinylidene fluoride)/poly(l-lactic acid) polymer blend. Materials Today: Proceedings, 2018, 5: S130–S136

23 Bairamov D F, Chalykh A E, Feldstein M M, Siegel R A. Impact of molecular weight on miscibility and interdiffusion between poly(n-vinyl pyrrolidone) and poly(ethylene glycol). Macromolecular Chemistry and Physics, 2002, 203(18): 2674–2685

24 Fang L F, Yang H Y, Cheng L, Kato N, Jeon S, Takagi R, Matsuyama H. Effect of molecular weight of sulfonated poly(ether sulfone) (SPES): on the mechanical strength and antifouling properties of poly(ether sulfone)/SPES blend membranes. Industrial & Engineering Chemistry Research, 2017, 56(39): 11302–11311

25 Xu Z L, Qusay F A. Effect of polyethylene glycol molecular weights and concentrations on polyethersulfone hollow fiber ultrafiltration membranes. Journal of Applied Polymer Science, 2004, 91(5): 3398–3407

26 Chakrabarty B, Ghoshal A K, Purkait M K. Effect of molecular weight of PEG on membrane morphology and transport properties. Journal of Membrane Science, 2008, 309(1–2): 209–221

27 Hou J, Yun J, Jeon S, Chung K Y, Byun H. Preparation and fundamental characterization of EVOH hollow fiber membranes via thermally induced phase separation (TIPS). Membrane Journal, 2018, 28(6): 395–405

28 Lv R, Zhou J, Du Q, Wang H, Zhong W. Preparation, and characterization of EVOH/PVP membranes via thermally induced phase separation. Journal of Membrane Science, 2006, 281(1–2): 700–706

29 Cui Z, Tang X, Li W, Liu H, Zhang J, Wang H, Li J. EVOH in situ fibrillation and its effect of strengthening, toughening and hydrophilic modification on PVDF hollow fiber microfiltration membrane via TIPS process. Journal of Materials Science, 2019, 54(7): 5971–5987

30 Ayyavoo J, Kim I C, Kwon Y N. Preparation of EVOH and aramid-modified polar nylon membrane for the removal of hard and soft colloidal particles. Journal of Industrial and Engineering Chemistry, 2018, 65: 72–81

31 Kadanyo S, Gumbi N N, Matindi C N, Dlamini D S, Hu Y, Cui Z, Wang H, Hu M, Li J. Enhancing compatibility and hydrophilicity of polysulfone/poly(ethylene-co-vinyl alcohol): copolymer blend ultrafiltration membranes using polyethylene glycol as hydrophilic additive and compatibilizer. Separation and Purification Technology, 2022, 287: 120523

32 Cai Y, Li J, Guo Y, Cui Z, Zhang Y. In-situ monitoring of asymmetric poly(ethylene-co-vinyl alcohol): membrane formation via a phase inversion process by an ultrasonic through-transmission technique. Desalination, 2011, 283: 25–30

33 Pertile C, Zanini M, Baldasso C, Andrade M Z, Cristinatessaro I. Evaluation of membrane microfiltration fouling in landfill leachate treatment. Matéria, 2018, 23(1): 11961

34 Abdelrasoul A, Doan H, Lohi A, Cheng C H. Morphology control of polysulfone membranes in filtration processes. ChemBioEng Reviews, 2015, 2(1): 22–43

35 de Lima J A, Felisberti M I. Porous polymer structures obtained via the TIPS process from EVOH/PMMA/DMF solutions. Journal of Membrane Science, 2009, 344(1–2): 237–243

36 Xie Y X, Wang K K, Yu W H, Cui M B, Shen Y J, Wang X Y, Fang L F, Zhu B K. Improved permeability, and antifouling properties of polyvinyl chloride ultrafiltration membrane via blending sulfonated polysulfone. Journal of Colloid and Interface Science, 2020, 579: 562–572

37 Liu S, Zhang M, Huang B, Wu N, Ouyang S. Raman spectroscopy for the competition of hydrogen bonds in ternary (H₂O-THF-DMSO) aqueous solutions. Molecules, 2019, 24(20): 3666

38 Miao R, Wang L, Gao Z, Mi N, Liu T, Lv Y, Wang X. Polyvinylidene fluoride/poly(ethylene-co-vinyl alcohol): blended membranes and a systematic insight into their antifouling properties. RSC Advances, 2015, 5(46): 36325–36333

39 Hu M, Cui Z, Li J, Zhang L, Mo Y, Dlamini D S, Wang H, He B, Li J, Matsuyama H. Ultra-low graphene oxide loading for water permeability, antifouling and antibacterial improvement of polyethersulfone/sulfonated polysulfone ultrafiltration membranes. Journal of Colloid and Interface Science, 2019, 552: 319–331

40 Haddadpour N, Ahmadi Z, Shariatinia Z, Taromi F A. Nanofiltration membranes based on PA6/EVOH with variable composition and morphology. Journal of Vinyl and Additive Technology, 2019, 25(S1): E28–E34

41 Fang L F, Jeon S, Kakihana Y, Kakehi J I, Zhu B K, Matsuyama H, Zhao S. Improved antifouling properties of polyvinyl chloride blend membranes by novel phosphate based-zwitterionic polymer additive. Journal of Membrane Science, 2018, 528: 326–335

42 Chen J, Li J, Zhan X, Han X, Chen C. Effect of PEG additives on properties and morphologies of polyetherimide membranes prepared by phase inversion. Frontiers of Chemical Engineering in China, 2010, 4(3): 300–306

43 Zhou J, Meng S, Guo Z, Du Q, Zhong W. Membranes with improved protein-adsorption-resistance property. Journal of Membrane Science, 2007, 305(1–2): 279–286