Efficient removal of Cr(VI) and Pb(II) from aqueous solution by magnetic nitrogen-doped carbon

Abstract

The magnetic nitrogen-doped carbon (MNC) was prepared from polypyrrole by a simple high temperature calcination process in this paper. The structure and properties of MNC were analyzed by scanning electron microscope, Fourier transform infrared spectroscopy, X-ray diffraction, Brunner-Emmet-Teller, vibrating sample magnetometer, and X-ray photoelectron spectroscopy. The capacity of MNC to adsorb Cr(VI) and Pb(II) was evaluated. The effects of the initial pH, dosage, concentration and temperature on the adsorption capacity of MNC were measured. MNC had a large specific surface area and a special porous structure. Its nitrogen and carbon sources were rich, and the ratio of carbon to nitrogen was fixed. The maximum Cr(VI)-adsorption capacity and maximum Pb(II) adsorption capacity of MNC could reach 456.63 and 507.13 mg∙g⁻¹ at 318 K, respectively. The pseudo-second-order model was used to describe the adsorption kinetics of MNC, and the Freundlich model was employed to discuss its isotherms. The adsorption process was affected by the electrostatic force, the reducing reaction, pores and chelation. The results of this study suggest that MNC is a material with superior performance, and is very easily regenerated, reused, and separated in the adsorption process.

Key words： magnetic; nitrogen-doped carbon; adsorption; Cr(VI); Pb(II)

Acknowledgments

The authors are grateful to the Applied Basic Research Programs of Science and Technology Department of Sichuan Province (Grant No. 2018JY0115), the Application Technology Research and Development Special Project of Nanchong, China (Grant No. 18YFZJ0035), the Meritocracy Research Funds of China West Normal University (Grant Nos. 17YC013 and 17YC139).

Electronic Supplementary Material

Supplementary material is available in the online version of this article at https://dx.doi.org/10.1007/s11705-020-2032-8 and is accessible for authorized users.

References

1 Naushad M, Ahamad T, Sharma G, Al-Muhtaseb A H, Albadarin A B, Alam M M, Alothman Z A, Alshehri S M, Ghfar A A. Synthesis and characterization of a new starch/SnO₂ nanocomposite for efficient adsorption of toxic Hg²⁺ metal ion. Chemical Engineering Journal, 2016, 300: 306–316

2 Ranjan B, Pillai S, Permaul K, Singh S. Simultaneous removal of heavy metals and cyanate in a wastewater sample using immobilized cyanate hydratase on magnetic-multiwall carbon nanotubes. Journal of Hazardous Materials, 2019, 363: 73–80

3 Sharafi K, Yunesian M, Mahvi A H, Pirsaheb M, Nazmara S, Nabizadeh N R. Advantages and disadvantages of different pre-cooking and cooking methods in removal of essential and toxic metals from various rice types—human health risk assessment in Tehran households, Iran. Ecotoxicology and Environmental Safety, 2019, 175: 128–137

4 Pap S, Bezanovic V, Radonic J, Babic A, Saric S, Adamovic D, Turk S M. Synthesis of highly-efficient functionalized biochars from fruit industry waste biomass for the removal of chromium and lead. Journal of Molecular Liquids, 2018, 268: 315–325

5 Li Z, Li L, Hu D, Gao C, Xiong J, Jiang H, Li W. Efficient removal of heavy metal ions and organic dyes with cucurbit [8] uril-functionalized chitosan. Journal of Colloid and Interface Science, 2019, 539: 400–413

6 Nayak V, Jyothi M S, Balakrishna R G, Padaki M, Deon S. Novel modified poly vinyl chloride blend membranes for removal of heavy metals from mixed ion feed sample. Journal of Hazardous Materials, 2017, 331: 289–299

7 Zhu C, Yun J, Wang Q, Yang G. Adsorption of ion pairs onto graphene flakes and impacts of counterions during the adsorption processes. Applied Surface Science, 2018, 435: 329–337

8 Xu Y, Guo W. Optimal water adsorption on phosphorene. Journal of Alloys and Compounds, 2018, 737: 365–371

9 Wang J, Zhuang S, Liu Y. Metal hexacyanoferrates-based adsorbents for cesium removal. Coordination Chemistry Reviews, 2018, 374: 430–438

10 Yi I G, Kang J K, Lee S C, Lee C G, Kim S B. Synthesis of an oxidized mesoporous carbon-based magnetic composite and its application for heavy metal removal from aqueous solutions. Microporous and Mesoporous Materials, 2019, 279: 45–52

11 Huong P T L, Huy L T, Lan H, Thang L H, An T T, Van Quy N, Tuan P A, Alonso J, Phan M H, Le A T. Magnetic iron oxide-carbon nanocomposites: impacts of carbon coating on the As(V) adsorption and inductive heating responses. Journal of Alloys and Compounds, 2018, 739: 139–148

12 Dong J, Lin Y, Zong H, Yang H. Hierarchical LiFe₅O₈@PPy core-shell nanocomposites as electrode materials for supercapacitors. Applied Surface Science, 2019, 470: 1043–1052

13 Zhu J, Xu Y, Zhang Y, Feng T, Wang J, Mao S, Xiong L. Porous and high electronic conductivity nitrogen-doped nano-sheet carbon derived from polypyrrole for high-power supercapacitors. Carbon, 2016, 107: 638–645

14 Wang E J, Sui Z Y, Sun Y N, Ma Z, Han B H. Effect of porosity parameters and surface chemistry on carbon dioxide adsorption in sulfur-doped porous carbons. Langmuir, 2018, 34(22): 6358–6366

15 Wang Z, Liu X, Lv M, Meng J. A new kind of mesoporous Fe₇Co₃/carbon nanocomposite and its application as magnetically separable adsorber. Materials Letters, 2010, 64(10): 1219–1221

16 Liu X, Liao Y, Gao H. Enhancement adsorption of hexavalent chromium from aqueous solution on polypyrrole using ethylamine group. Journal of Dispersion Science and Technology, 2018, 39(10): 1394–1402

17 Zhan L, Chen H, Fang J, Wang S, Ding L X, Li Z, Ashman P J, Wang H. Coaxial Co₃O₄@polypyrrole core-shell nanowire arrays for high performance lithium ion batteries. Electrochimica Acta, 2016, 209: 192–200

18 Peng X, Zhang W, Gai L, Jiang H, Wang Y, Zhao L. Dedoped Fe₃O₄/PPy nanocomposite with high anti-interfering ability for effective separation of Ag(I) from mixed metal-ion solution. Chemical Engineering Journal, 2015, 280: 197–205

19 Su F, Poh C K, Chen J S, Xu G, Wang D, Li Q, Lin J, Lou X W. Nitrogen-containing microporous carbon nanospheres with improved capacitive properties. Energy & Environmental Science, 2011, 4(3): 717–724

20 Wang T, Zhao P, Lu N, Chen H, Zhang C, Hou X. Facile fabrication of Fe₃O₄/MIL-101(Cr) for effective removal of acid red 1 and orange G from aqueous solution. Chemical Engineering Journal, 2016, 295: 403–413

21 Meng L Y, Park S J. Effect of ZnCl₂ activation on CO₂ adsorption of N-doped nanoporous carbons from polypyrrole. Journal of Solid State Chemistry, 2014, 218: 90–94

22 Ma X, Chai H, Cao Y, Xu J, Wang Y, Dong H, Jia D, Zhou W. An effective bifunctional electrocatalysts: controlled growth of CoFe alloy nanoparticles supported on N-doped carbon nanotubes. Journal of Colloid and Interface Science, 2018, 514: 656–663

23 Yan W, Cao X, Ke K, Tian J, Jin C, Yang R. One-pot synthesis of monodispersed porous CoFe₂O₄ nanospheres on graphene as an efficient electrocatalyst for oxygen reduction and evolution reactions. RSC Advances, 2016, 6(1): 307–313

24 Wang Y J, Wilkinson D P, Neburchilov V, Song C, Guest A, Zhang J. Ta and Nb co-doped TiO₂ and its carbon-hybrid materials for supporting Pt-Pd alloy electrocatalysts for PEM fuel cell oxygen reduction reaction. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2014, 2(32): 12681–12685

25 El-Sayed M, Nada A A. Polyethylenimine-functionalized amorphous carbon fabricated from oil palm leaves as a novel adsorbent for Cr(VI) and Pb(II) from aqueous solution. Journal of Water Process Engineering, 2017, 16: 296–308

26 Zhang S, Wang X, Li J, Wen T, Xu J, Wang X. Efficient removal of a typical dye and Cr(VI) reduction using N-doped magnetic porous carbon. RSC Advances, 2014, 4(108): 63110–63117

27 Mishra S, Verma N. Surface ion imprinting-mediated carbon nanofiber-grafted highly porous polymeric beads: synthesis and application towards selective removal of aqueous Pb(II). Chemical Engineering Journal, 2017, 313: 1142–1151

28 Gao H, Wang Y, Zheng L. Hydroxyl-functionalized ionic liquid-based cross-linked polymer as highly efficient adsorbent for anionic azo dyes removal. Chemical Engineering Journal, 2013, 234: 372–379

29 Fan J, Zhang J, Zhang C, Ren L, Shi Q. Adsorption of 2,4,6-trichlorophenol from aqueous solution onto activated carbon derived from loosestrife. Desalination, 2011, 267(2-3): 139–146

30 Elbana T A, Magdi Selim H, Akrami N, Newman A, Shaheen S M, Rinklebe J. Freundlich sorption parameters for cadmium, copper, nickel, lead, and zinc for different soils: influence of kinetics. Geoderma, 2018, 324: 80–88

31 Liu D, Li Z, Li W, Zhong Z, Xu J, Ren J, Ma Z. Adsorption behavior of heavy metal ions from aqueous solution by soy protein hollow microspheres. Industrial & Engineering Chemistry Research, 2013, 52(32): 11036–11044

32 Chigondo M, Paumo H K, Bhaumik M, Pillay K, Maity A. Magnetic arginine-functionalized polypyrrole with improved and selective chromium(VI) ions removal from water. Journal of Molecular Liquids, 2019, 275: 778–791

33 Aigbe U O, Das R, Ho W H, Srinivasu V, Maity A. A novel method for removal of Cr(VI) using polypyrrole magnetic nanocomposite in the presence of unsteady magnetic fields. Separation and Purification Technology, 2018, 194: 377–387

34 Sánchez J, Espinosa C, Pooch F, Tenhu H, Pizarro G C, Oyarzún D P. Poly(N,N-dimethylaminoethyl methacrylate) for removing chromium(VI) through polymer-enhanced ultrafiltration technique. Reactive & Functional Polymers, 2018, 127: 67–73

35 Lin C, Luo W, Luo T, Zhou Q, Li H, Jing L. A study on adsorption of Cr(VI) by modified rice straw: characteristics, performances and mechanism. Journal of Cleaner Production, 2018, 196: 626–634

36 Karim M R, Aijaz M O, Alharth N H, Alharbi H F, Al-Mubaddel F S, Awual M R. Composite nanofibers membranes of poly(vinyl alcohol)/chitosan for selective lead(II) and cadmium(II) ions removal from wastewater. Ecotoxicology and Environmental Safety, 2019, 169: 479–486

37 Kim M Y, Lee T G. Removal of Pb(II) ions from aqueous solutions using functionalized cryogels. Chemosphere, 2019, 217: 423–429

38 Ahmad N, Sereshti H, Mousazadeh M, Rashidi Nodeh H, Kamboh M A, Mohamad S. New magnetic silica-based hybrid organic-inorganic nanocomposite for the removal of lead(II) and nickel(II) ions from aqueous solutions. Materials Chemistry and Physics, 2019, 226: 73–81

39 Zhong G, Huang J, Yao Z, Luo B, Li K, Xu S, Fu X, Cao Y. Intrinsic acid resistance and high removal performance from the incorporation of nickel nanoparticles into nitrogen doped tubular carbons for environmental remediation. Journal of Colloid and Interface Science, 2020, 566: 46–59

40 Huang J, Cao Y, Wen H, Zhang J, Wang H, Yu H, Peng F. Unraveling the intrinsic enhancement of fluorine doping in the dual-doped magnetic carbon adsorbent for the environmental remediation. Journal of Colloid and Interface Science, 2019, 538: 327–339

41 Huang J, Cao Y, Qin B, Zhong G, Zhang J, Yu H, Wang H, Peng F. Highly efficient and acid-corrosion resistant nitrogen doped magnetic carbon nanotubes for the hexavalent chromium removal with subsequent reutilization. Chemical Engineering Journal, 2019, 361: 547–558

42 Huang J, Li Y, Cao Y, Peng F, Cao Y, Shao Q, Liu H, Guo Z. Hexavalent chromium removal over magnetic carbon nanoadsorbents: synergistic effect of fluorine and nitrogen co-doping. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2018, 6(27): 13062–13074

43 Cao Y, Huang J, Li Y, Qiu S, Liu J, Khasanov A, Khan M A, Young D P, Peng F, Cao D, Peng X, Hong K, Guo Z. One-pot melamine derived nitrogen doped magnetic carbon nanoadsorbents with enhanced chromium removal. Carbon, 2016, 109: 640–649

44 Huang J, Cao Y, Shao Q, Peng X, Guo Z. Magnetic nanocarbon adsorbents with enhanced hexavalent chromium removal: morphology dependence of fibrillar vs particulate structures. Industrial & Engineering Chemistry Research, 2017, 56(38): 10689–10701

45 Liu L, Liu X, Wang D, Lin H, Huang L. Removal and reduction of Cr(VI) in simulated wastewater using magnetic biochar prepared by co-pyrolysis of nano-zero-valent iron and sewage sludge. Journal of Cleaner Production, 2020, 257: 120562

46 Chatterjee S, Mahanty S, Das P, Chaudhuri P, Das S. Biofabrication of iron oxide nanoparticles using manglicolous fungus Aspergillus niger BSC-1 and removal of Cr(VI) from aqueous solution. Chemical Engineering Journal, 2020, 385: 123790

47 Wang Y, Huang L, Wang Z, Wang L, Han Y, Liu X, Ma T. Application of polypyrrole flexible electrode for electrokinetic remediation of Cr(VI)-contaminated soil in a main-auxiliary electrode system. Chemical Engineering Journal, 2019, 373: 131–139

48 Zhang L, Niu W, Sun J, Zhou Q. Efficient removal of Cr(VI) from water by the uniform fiber ball loaded with polypyrrole: static adsorption, dynamic adsorption and mechanism studies. Chemosphere, 2020, 248: 126102

49 Chen W, Lu Z, Xiao B, Gu P, Yao W, Xing J, Asiri A M, Alamry K A, Wang X, Wang S. Enhanced removal of lead ions from aqueous solution by iron oxide nanomaterials with cobalt and nickel doping. Journal of Cleaner Production, 2019, 211: 1250–1258