Frontiers of Chemical Science and Engineering >
Study on the surface-modification of nano-hydroxyapatite with lignin and the corresponding nanocomposite with poly (lactide-co-glycolide)
Received date: 01 Apr 2020
Accepted date: 08 Jun 2020
Published date: 15 Jun 2021
Copyright
To obtain nano-hydroxyapatite/poly(lactide-co-glycolide) (n-HA/PLGA) nanocomposite with superior mechanical properties, here, lignin was chosen to surface-modify for n-HA through co-precipitation method. The different reaction conditions of reaction time, phosphorus source, and the lignin addition amount were studied by fourier transformation infrared spectra, X-ray diffraction, the intuitionistic dispersion experiment, transmission electron microscope and thermal gravimetric analysis. The reaction mechanism and the best appropriate reaction condition were obtained. More importantly, the results of electromechanical universal tester, scanning electron microscope, differential scanning calorimetric analyzer, polarized optical microscopy and dynamic mechanical analysis confirmed that the obtained n-HA could greatly increase the mechanical strength of PLGA, owing to the excellent dispersion and promotion crystallization effect. Moreover, in vitro cell culture experimental results indicated that the n-HA surface-modified by lignin was favorable to improve the cell biocompatibility of PLGA. The study suggested that the introduction of lignin was a novel method to acquire a highly dispersed n-HA, which would provide a new idea to achieve the n-HA/PLGA nanocomposite as bone materials in future, and it would pave the way towards a new application of lignin in biomedical field.
Haojie Ding , Liuyun Jiang , Chunyan Tang , Shuo Tang , Bingli Ma , Na Zhang , Yue Wen , Yan Zhang , Liping Sheng , Shengpei Su , Xiang Hu . Study on the surface-modification of nano-hydroxyapatite with lignin and the corresponding nanocomposite with poly (lactide-co-glycolide)[J]. Frontiers of Chemical Science and Engineering, 2021 , 15(3) : 630 -642 . DOI: 10.1007/s11705-020-1970-5
1 |
Diao H X, Si Y F, Zhu A P, Ji L J, Shi H C. Surface modified nano-hydroxyapatite/poly (lactide acid) composite and its osteocyte compatibility. Materials Science and Engineering C, 2012, 32(7): 1796–1801
|
2 |
Jin F L, Hu R R, Park S J. Improvement of thermal behaviors of biodegradable poly (lactic acid) polymer: a review. Composites. Part B, Engineering, 2019, 164: 287–296
|
3 |
Lai P L, Hong D W, Lin C T Y, Chen L H, Chen W J, Chu I M. Effect of mixing ceramics with a thermosensitive biodegradable hydrogel as composite graft. Composites. Part B, Engineering, 2012, 43(8): 3088–3095
|
4 |
Haider A, Versace D, Gupta K C, Kang I K. Pamidronic acid-grafted nHA/PLGA hybrid nanofiber scaffolds suppress osteoclastic cell viability and enhance osteoblastic cell activity. Journal of Materials Chemistry. B, Materials for Biology and Medicine, 2016, 4(47): 7596–7604
|
5 |
Shi X T, Wang Y J, Ren L, Gong Y H, Wang D A. Enhancing alendronate release from a novel PLGA/hydroxyapatite microspheric system for bone repairing applications. Pharmaceutical Research, 2009, 26(2): 422–430
|
6 |
Li J, Lu X L, Zheng Y F. Effect of surface modified hydroxyapatite on the tensile property improvement of HA/PLA composite. Applied Surface Science, 2008, 255(2): 494–497
|
7 |
Akindoyo J O, Beg M D H, Ghazali S, Heim H P, Feldmann M. Effects of surface modification on dispersion, mechanical, thermal and dynamic mechanical properties of injection molded PLA-hydroxyapatite composites. Composites. Part A, Applied Science and Manufacturing, 2017, 103: 96–105
|
8 |
Jiang L Y, Jiang L X, Xiong C D, Xu L J, Li Y. Effect of L-lysine-assisted surface-grafting for nano-hydroxyapatite on mechanical properties and in vitro bioactivity of poly(lactic acid-co-glycolic acid). Journal of Biomaterials Applications, 2016, 30(6): 750–758
|
9 |
Jiang L Y, Xiong C D, Chen D L, Jiang L X, Pang X B. Effect of n-HA with different surface-modified on the properties of n-HA/PLGA composite. Applied Surface Science, 2012, 259: 72–78
|
10 |
Jiang L Y, Xiong C D, Jiang L X, Xu L J. Effect of HA with different grain size range on the crystallization behaviors andmechanical property of HA/PLGA composite. Thermochimica Acta, 2013, 565: 52–57
|
11 |
Mao D Y, Li Q, Bai N N, Dong H Z, Li D K. Porous stable poly(lactic acid)/ethyl cellulose/hydroxyapatite composite scaffolds prepared by a combined method for bone regeneration. Carbohydrate Polymers, 2018, 180: 104–111
|
12 |
Musilova L, Mracek A, Kovalcik A, Smolka P, Minarik A, Humpolicek P, Vicha R, Ponizil P. Hyaluronan hydrogels modified by glycinated Kraft lignin: morphology, swelling, viscoelastic properties and biocompatibility. Carbohydrate Polymers, 2018, 181: 394–403
|
13 |
Ding H J, Jiang L Y, Ma B L, Su S P. Preparation of a highly dispersed nano-hydroxyapatite by a new surfacemodificationstrategy used for a reinforce filler for poly(lactic-co-glycolide). Industrial & Engineering Chemistry Research, 2018, 57(50): 17119–17128
|
14 |
Supanchaiyamat N, Jetsrisuparb K, Knijnenburg J T N, Tsang D C W, Hunt A J. Lignin materials for adsorption: current trend, perspectives and opportunities. Bioresource Technology, 2019, 272: 570–581
|
15 |
Chen H Z. Chemical composition and structure of natural lignocellulose. In: Biotechnology of Lignocellulose. Berlin: Springer International Publishing, 2014, 25–71
|
16 |
Zhan X J, Cai C, Pang Y X, Qin F Y, Lou H M, Huang J H, Qiu X Q. Effect of the isoelectric point of pH-responsive lignin-based amphoteric surfactant on the enzymatic hydrolysis of lignocelluloses. Bioresource Technology, 2019, 283: 112–119
|
17 |
Meng Y, Lu J, Cheng Y, Li Q, Wang H S. Lignin-based hydrogels: a review of preparation, properties, and application. International Journal of Biological Macromolecules, 2019, 135: 1006–1019
|
18 |
Tao Y Z, Guan Y T. Study of chemical composition of lignin and its application. Journal of Fuel Cell Science and Technology, 2003, 1: 42–55 (in Chinese)
|
19 |
Pang Y X, Bao X. Influence of temperature, ripening time and calcination on the morphology and crystallinity of hydroxyapatite nanoparticles. Journal of the European Ceramic Society, 2003, 23(10): 1697–1704
|
20 |
Elhendawi H, Felfel R M, Elhady B M A, Reicha F M. Effect of synthesis temperature on the crystallization and growth of in situ prepared nanohydroxyapatite in chitosan matrix. ISRN Biomaterials, 2014: 1–8
|
21 |
Wang P P, Li C H, Gong H Y, Jiang X R, Wang H Q, Li K X. Effects of synthesis conditions on the morphology of hydroxyapatite nanoparticles produced by wet chemical process. Powder Technology, 2010, 203(2): 315–321
|
22 |
Bayani M, Torabi S, Shahnaz A, Pourali M. Main properties of nanocrystalline hydroxyapatite as a bone graft material in treatment of periodontal defects: a review of literature. Biotechnology, Biotechnological Equipment, 2017, 31(2): 215–220
|
23 |
Turki T, Othmani M, Bantignies J L, Bouzouita K. Hydroxyapatite-phosphonoformic acid hybrid compounds prepared by hydrothermal method. Applied Surface Science, 2014, 290: 327–331
|
24 |
Sawpan M A, Pickering K L, Fernyhough A. Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites. Composites. Part A, Applied Science and Manufacturing, 2011, 42(3): 310–319
|
25 |
Zhang B J, He L, Han Z W, Li X G, Zhi W, Zheng W, Mu Y D, Weng J. Enhanced osteogenesis of multilayered pore-closed microsphere-immobilized hydroxyapatite scaffold via sequential delivery of osteogenic growth peptide and BMP-2. Journal of Materials Chemistry B, 2017, 5(41): 8238–8253
|
26 |
Yuan X Y, Zhu B S, Tong G S, Su Y, Zhu X Y. Wet-chemical synthesis of Mg-doped hydroxyapatite nanoparticles by step reaction and ion exchange processes. Journal of Macromolecular Science, Part B: Physics, 2013, 1(47): 6551–6559
|
27 |
Shi P J, Liu M, Fan F J, Yu C P, Lu W H, Du M. Characterization of natural hydroxyapatite originated from fish bone and its biocompatibility with osteoblasts. Materials Science and Engineering C, 2018, 90: 706–712
|
28 |
Fernando M S, de Silva R M, de Silva K M N. Synthesis, characterization, and application of nano hydroxyapatite and nanocomposite of hydroxyapatite with granular activated carbon for the removal of Pb2+ from aqueous solutions. Applied Surface Science, 2015, 351: 95–103
|
29 |
Jiang L X, Jiang L Y, Ma C, Han C T, Xiong C D, Xu L J. Preparation and characterization of nano-hydroxyapatite/PLGA composites with novel surface-modified nano-hydroxyapatite. Journal of Inorganic Materials, 2013, 28(7): 751–756 (in Chinese)
|
30 |
Ando D, Nakatsubo F, Yano H. Thermal stability of lignin in ground pulp (GP) and the effect of lignin modification on GP’s thermal stability: TGA experiments with dimeric lignin model compounds and milled wood lignins. Holzforschung, 2019, 73(5): 493–499
|
31 |
Hong Z K, Zhang P B, He C L, Qiu X Y, Liu A X, Chen L, Chen X, Jing X B. Nano-composite of poly(L-lactide) and surface grafted hydroxyapatite: Mechanical properties and biocompatibility. Biomaterials, 2005, 26(32): 296–6304
|
32 |
Zhang H Y, Choi J R, Park S J. Enhancing the heat and load transfer efficiency by optimizing the interface of hexagonal boron nitride/elastomer nanocomposites for thermal management applications. Polymer, 2018, 143: 1–9
|
33 |
Zhang H Y, Choi J R, Park S J. Interlayer polymerization in amine-terminated macromolecular chain-grafted expanded graphite for fabricating highly thermal conductive and physically strong thermoset composites for thermal management applications. Composites. Part A, Applied Science and Manufacturing, 2018, 109: 498–506
|
34 |
Yang D D, Liu W, Zhu H M, Wu G, Chen S C, Wang X L, Wang Y Z. Toward super-tough poly(L-lactide) via constructing pseudo-cross-link network in toughening phase anchored by stereocomplex crystallites at the interface. ACS Applied Materials & Interfaces, 2018, 10(31): 26594–26603
|
35 |
Xuan D D, Zhou Y F, Nie W Y, Chen P P. Sodium alginate-assisted exfoliation of MoS2 and its reinforcement in polymer nanocomposites. Carbohydrate Polymers, 2017, 144: 25–32
|
36 |
Guo Y C, He S, Yang K, Xue Y, Zuo X H, Yu Y J, Liu Y, Chang C C, Rafailovich M H. Enhancing the mechanical properties of biodegradable polymer blends using tubular nanoparticle stitching of the interfaces. ACS Applied Materials & Interfaces, 2016, 8(27): 17565–17573
|
37 |
Jankovic A, Erakovic S, Ristoscu C, Mihailescu N, Duta L, Visan A, Stan G E, Popa A C, Husanu M A, Luculescu C R,
|
/
〈 | 〉 |