Hemocompatible polyurethane/gelatin-heparin nanofibrous scaffolds formed by a bi-layer electrospinning technique as potential artificial blood vessels

Abstract

In this paper, a scaffold, which mimics the morphology and mechanical properties of a native blood vessel is reported. The scaffold was prepared by sequential bi-layer electrospinning on a rotating mandrel-type collector. The tubular scaffolds (inner diameter 4 mm, length 3 cm) are composed of a polyurethane (PU) fibrous outer-layer and a gelatin-heparin fibrous inner-layer. They were fabricated by electrospinning technology, which enables control of the composition, structure, and mechanical properties of the scaffolds. The microstructure, fiber morphology and mechanical properties of the scaffolds were examined by means of scanning electron microscopy (SEM) and tensile tests. The PU/gelatin-heparin tubular scaffolds have a porous structure. The scaffolds achieved a breaking strength (3.7±0.13 MPa) and an elongation at break (110±8%) that are appropriate for artificial blood vessels. When the scaffolds were immersed in water for 1 h, the breaking strength decreased slightly to 2.2±0.3 MPa, but the elongation at break increased to 145±21%. In platelet adhesion tests the gelatin-heparin fibrous scaffolds showed a significant suppression of platelet adhesion. Heparin was released from the scaffolds at a fairly uniform rate during the period of 2^nd day to 9^th day. The scaffolds are expected to mimic the complex matrix structure of native arteries, and to have good biocompatibility as an artificial blood vessel owing to the heparin release.

Key words： electrospinning; artificial blood vessels; scaffold; polyurethane; gelatin; nanofiber; hemocompatibility

Acknowledgments

This work has been financially supported by the Program for New Century of Excellent Talents in University (NCET-07-0596), Ministry of Education of China, by the International Cooperation from the Ministry of Science and Technology of China (MOST No. 2008DFA51170), and by the Science and Technology Project of Tianjin Municipal Science and Technology Commission (No. 08ZCKFSF03300). The project is funded by the Tianjin University-Helmholtz-Zentrum Geesthacht Joint Laboratory for Biomaterials and Regenerative Medicine, which is financed by MOST and the German Federal Ministry of Education and Research (BMBF).

References

1 Barron V, Lyons E, Stenson-Cox C, McHugh P E, Pandit A. Bioreactors for cardiovascular cell and tissue growth: a review. Annals of Biomedical Engineering, 2003, 31(9): 1017–1030

2 Hoenig M R, Campbell G R, Rolfe B E, Campbell J H. Tissue-engineered blood vessels: alternative to autologous grafts? Arteriosclerosis, Thrombosis, and Vascular Biology, 2005, 25(6): 1128–1134

3 Tiwari A, Salacinski H J, Punshon G, Hamilton G, Seifalian A M. Development of a hybrid cardiovascular graft using a tissue engineering approach. The FASEB Journal, 2002, 16(8): 791–796

4 Jeong S I, Kim S Y, Cho S K, Chong M S, Kim K S, Kim H, Lee S B, Lee Y M. Tissue-engineered vascular grafts composed of marine collagen and PLGA fibers using pulsatile perfusion bioreactors. Biomaterials, 2007, 28(6): 1115–1122

5 Buttafoco L, Engbers-Buijtenhuijs P, Poot A A, Dijkstra P J, Vermes I, Feijen J. Physical characterization of vascular grafts cultured in a bioreactor. Biomaterials, 2006, 27(11): 2380–2389

6 Couet F, Rajan N, Mantovani D. Macromolecular biomaterials for scaffold-based vascular tissue engineering. Macromolecular Bioscience, 2007, 7(5): 701–718

7 Jung F, Wischke C, Lendlein A. Degradable, multifunctional cardiovascular implants: challenges and hurdles. MRS Bulletin, 2010, 35(08): 607–613

8 Baguneid M S, Seifalian A M, Salacinski H J, Murray D, Hamilton G, Walker M G. Tissue engineering of blood vessels. The British Journal of Surgery, 2006, 93(3): 282–290

9 Ko J H, Yin H, An J, Chung D J, Kim J H, Lee S B, Pyun D G. Characterization of cross-linked gelatin nanofibers through electrospinning. Macromolecular Research, 2010, 18(2): 137–143

10 Feng Y K, Meng F R, Xiao R F, Zhao H Y, Guo J T. Electrospinning of polycarbonate urethane biomaterials. Frontiers of Chemical Science and Engineering, 2011, 5(1): 11–18

11 Kidoaki S, Kwon I K, Matsuda T. Mesoscopic spatial designs of nano- and microfiber meshes for tissue-engineering matrix and scaffold based on newly devised multilayering and mixing electrospinning techniques. Biomaterials, 2005, 26(1): 37–46

12 Thomas V, Dean D R, Jose M V, Mathew B, Chowdhury S, Vohra Y K. Nanostructured biocomposite scaffolds based on collagen coelectrospun with nanohydroxyapatite. Biomacromolecules, 2007, 8(2): 631–637

13 Thomas V, Zhang X, Vohra Y K. A biomimetic tubular scaffold with spatially designed nanofibers of protein/PDS bio-blends. Biotechnology and Bioengineering, 2009, 104(5): 1025–1033

14 Thomas V, Zhang X, Catledge S A, Vohra Y K. Functionally graded electrospun scaffolds with tunable mechanical properties for vascular tissue regeneration. Biomedical Materials (Bristol, England), 2007, 2(4): 224–232

15 Zhang S, Feng Y, Zhang L, Guo J, Xu Y. Biodegradable polyesterurethane networks for controlled release of aspirin. Journal of Applied Polymer Science, 2010, 116(2): 861–867

16 Feng Y, Xue Y, Guo J, Cheng L, Jiao L, Zhang Y, Yue J. Synthesis and characterization of Poly(carbonate urethane) networks with shape-memory properties. Journal of Applied Polymer Science, 2009, 112(1): 473–478

17 Ma Z, Kotaki M, Inai R, Ramakrishna S. Potential of nanofiber matrix as tissue-engineering scaffolds. Tissue Engineering, 2005, 11(1-2): 101–109

18 Koh H S, Yong T, Chan C K, Ramakrishna S. Enhancement of neurite outgrowth using nano-structured scaffolds coupled with laminin. Biomaterials, 2008, 29(26): 3574–3582

19 Lee K Y, Jeong L, Kang Y O, Lee S J, Park W H. Electrospinning of polysaccharides for regenerative medicine. Advanced Drug Delivery Reviews, 2009, 61(12): 1020–1032

20 Luong-Van E, Grøndahl L, Chua K N, Leong K W, Nurcombe V, Cool S M. Controlled release of heparin from poly(ϵ-caprolactone) electrospun fibers. Biomaterials, 2006, 27(9): 2042–2050

21 Smith P K, Mallia A K, Hermanson G T. Colorimetric method for the assay of heparin content in immobilized heparin preparations. Analytical Biochemistry, 1980, 109(2): 466–473

22 Courtney T, Sacks M S, Stankus J, Guan J J, Wagner W R. Design and analysis of tissue engineering scaffolds that mimic soft tissue mechanical anisotropy. Biomaterials, 2006, 27(19): 3631–3638

23 Fong H, Chun I, Reneker D H. Beaded nanofibers formed during electrospinning. Polymer, 1999, 40(16): 4585–4592

24 Zong X, Kim K, Fang D, Ran S, Hsiao B S, Chu B. Structure and process relationship of electrospun bioabsorbable nanofiber membranes. Polymer, 2002, 43(16): 4403–4412

25 Huang Z M, Zhang Y Z, Ramakrishna S, Lim C T. Electrospinning and mechanical characterization of gelatin nanofibers. Polymer, 2004, 45(15): 5361–5368

26 Clowes A W, Clowes M M. Kinetics of cellular proliferation after arterial injury. II. Inhibition of smooth muscle growth by heparin. Lab Invest, 1985, 52(6): 611–616

27 Kannan R Y, Salacinski H J, Butler P E, Hamilton G, Seifalian A M. Current status of prosthetic bypass grafts: a review. Journal of biomedical materials research. Part B: Applied Biomaterials, 2005, 74B(1): 570–581

28 Kuchulakanti P K, Chu W W, Torguson R, Ohlmann P, Rha S W, Clavijo L C, Kim S W, Bui A, Gevorkian N, Xue Z Y, Smith K, Fournadjieva J, Suddath W O, Satler L F, Pichard A D, Kent K M, Waksman R. Correlates and long-term outcomes of angiographically proven stent thrombosis with sirolimus- and paclitaxel-eluting stents. Circulation, 2006, 113(8): 1108–1113

29 Zeng J, Chen X, Xu X, Liang Q, Bian X, Yang L, Jing X. Ultrafine fibers electrospun from biodegradable polymers. Journal of Applied Polymer Science, 2003, 89(4): 1085–1092