Microwave-assisted pyrolysis of plastics for aviation oil production: energy and economic analyses
Sichen Fan, Yifan Liu, Yaning Zhang, Wenke Zhao, Chunbao Xu
Microwave-assisted pyrolysis of plastics for aviation oil production: energy and economic analyses
Microwave-assisted pyrolysis is an effective method for recycling plastic wastes into oils that can be used for aviation fuels. In this study, energy and economic analyses of aviation oil production from microwave-assisted pyrolysis of polystyrene were performed. The total energy efficiency, recovered energy efficiency, unitary cost, unitary energy economic cost, relative cost difference, and energy economic factor were detailed. And the effects of microwave power, pyrolysis temperature, microwave absorbent loading, and microwave absorbent type on these parameters were covered. It was found that pyrolysis temperature has the most significant effect on the unitary cost and unitary energy economic cost of aviation oil, and-microwave absorbent type has a significant influence on energy economic factor during the whole microwave-assisted pyrolysis process. The optimum reaction conditions at the tonnage system for pyrolysis of 1 t polystyrene were microwave power of 650 W, pyrolysis temperature of 460 °C, and silicon carbide (microwave absorbent) at a loading of 2 t (twice than feedstock loading). At these optimal conditions, the total energy efficiency, recovered energy efficiency, unitary cost, unitary energy economic cost, relative cost difference, and energy economic factor were 62.78%, 96.51%, 3.21 × 104 yuan·t–1, 779 yuan·GJ–1, 1.49, and 71.02%, respectively.
energy analysis / economic analysis / microwave-assisted pyrolysis / polystyrene / aviation oil
[1] |
Mishra R K , Mohanty K . Bio-oil and biochar production using thermal and catalytic pyrolysis of low-value waste neem seeds over low-cost catalysts: effects of operating conditions on product yields and studies of physicochemical characteristics of bio-oil and biochar. Biochar, 2021, 3(4): 641–656
CrossRef
Google scholar
|
[2] |
Lockwood M . The political sustainability of climate policy: the case of the UK Climate Change Act. Global Environmental Change, 2013, 23(5): 1339–1348
CrossRef
Google scholar
|
[3] |
Saracevic E , Woess D , Theuretzbacher F , Friedl A , Miltner A . Techno-economic assessment of providing control energy reserves with a biogas plant. Frontiers of Chemical Science and Engineering, 2018, 12(4): 763–771
CrossRef
Google scholar
|
[4] |
Wu Z , Huang X , Chen R , Mao X , Qi X . The United States and China on the paths and policies to carbon neutrality. Journal of Environmental Management, 2022, 320: 115785
CrossRef
Google scholar
|
[5] |
Wang J , Yao W , Cui Z , Gao Y . Energy, exergy, and exergoeconomic analysis of solar-driven solid oxide electrolyzer system integrated with waste heat recovery for syngas production. Journal of Thermal Science, 2023, 32(1): 135–152
CrossRef
Google scholar
|
[6] |
Hanak D P , Manovic V . Linking renewables and fossil fuels with carbon capture via energy storage for a sustainable energy future. Frontiers of Chemical Science and Engineering, 2020, 14(3): 453–459
CrossRef
Google scholar
|
[7] |
Guo M , Song W , Buhain J . Bioenergy and biofuels: history, status, and perspective. Renewable & Sustainable Energy Reviews, 2015, 42: 712–725
CrossRef
Google scholar
|
[8] |
Li Q , Yuan X , Hu X , Meers E , Ong H C , Chen W H , Duan P , Zhang S , Lee K B , Ok Y S . Co-liquefaction of mixed biomass feedstocks for bio-oil production: a critical review. Renewable & Sustainable Energy Reviews, 2022, 154: 111814
CrossRef
Google scholar
|
[9] |
Jiang J , Shi K , Zhang X , Yu K , Zhang H , He J , Ju Y , Liu J . From plastic waste to wealth using chemical recycling: a review. Journal of Environmental Chemical Engineering, 2022, 10(1): 106867
CrossRef
Google scholar
|
[10] |
Datta J , Kopczyńska P . From polymer waste to potential main industrial products: actual state of recycling and recovering. Critical Reviews in Environmental Science and Technology, 2016, 46(10): 905–946
CrossRef
Google scholar
|
[11] |
PlasticsEurope. Plastics—the fast facts 2023. https://plasticseurope.org/knowledge-hub/plastics-the-fast-facts-2023/
|
[12] |
Liu C , Xie Y , Gao D , Shi X , Rao Z . Fabrication of fire-retardant building materials via a hyper-crosslinking chemical conversion process from waste polystyrenes. Energy and Built Environment, 2022, 3(2): 226–232
CrossRef
Google scholar
|
[13] |
Cai S , Zhang B , Cremaschi L . Review of moisture behavior and thermal performance of polystyrene insulation in building applications. Building and Environment, 2017, 123: 50–65
CrossRef
Google scholar
|
[14] |
Alam S S , Husain A H , Khan N A . Plastic waste management via thermochemical conversion of plastics into fuel: a review. Energy Sources. Part A, Recovery, Utilization, and Environmental Effects, 2022, 44(3): 1–20
CrossRef
Google scholar
|
[15] |
Xayachak T , Haque N , Parthasarathy R , King S , Emami N , Lau D , Pramanik B K . Pyrolysis for plastic waste management: an engineering perspective. Journal of Environmental Chemical Engineering, 2022, 10(6): 108865
CrossRef
Google scholar
|
[16] |
Chaukura N , Gwenzi W , Bunhu T , Ruziwa D T , Pumure I . Potential uses and value-added products derived from waste polystyrene in developing countries: a review. Resources, Conservation and Recycling, 2016, 107: 157–165
CrossRef
Google scholar
|
[17] |
Loos C , Syrovets T , Musyanovych A , Mailander V , Landfester K , Nienhaus G U , Simmet T . Functionalized polystyrene nanoparticles as a platform for studying bio-nano interactions. Beilstein Journal of Nanotechnology, 2014, 5(1): 2403–2412
CrossRef
Google scholar
|
[18] |
Mirkarimi S M R , Bensaid S , Chiaramonti D . Conversion of mixed waste plastic into fuel for diesel engines through pyrolysis process: a review. Applied Energy, 2022, 327: 120040
CrossRef
Google scholar
|
[19] |
YangZLüFZhangHWangWShaoLYeJHeP. Is incineration the terminator of plastics and microplastics? Journal of Hazardous Materials, 2021, 401: 123429
|
[20] |
Hussein Z A , Shakor Z M , Alzuhairi M , Al-Sheikh F . The yield of gasoline range hydrocarbons from plastic waste pyrolysis. Energy Sources. Part A, Recovery, Utilization, and Environmental Effects, 2022, 44(1): 718–731
CrossRef
Google scholar
|
[21] |
Motasemi F , Afzal M T . A review on the microwave-assisted pyrolysis technique. Renewable & Sustainable Energy Reviews, 2013, 28: 317–330
CrossRef
Google scholar
|
[22] |
Zhang Y , Cui Y , Liu S , Fan L , Zhou N , Peng P , Wang Y , Guo F , Min M , Cheng Y .
CrossRef
Google scholar
|
[23] |
Wang Y , Ke L , Peng Y , Yang Q , Liu Y , Wu Q , Tang Y , Zhu H , Dai L , Zeng Z .
CrossRef
Google scholar
|
[24] |
Suriapparao D V , Vinu R . Resource recovery from synthetic polymers via microwave pyrolysis using different susceptors. Journal of Analytical and Applied Pyrolysis, 2015, 113: 701–712
CrossRef
Google scholar
|
[25] |
Shen X , Zhao Z , Li H , Gao X , Fan X . Microwave-assisted pyrolysis of plastics with iron-based catalysts for hydrogen and carbon nanotubes production. Materials Today. Chemistry, 2022, 26: 101166
CrossRef
Google scholar
|
[26] |
Mishra R R , Sharma A K . Microwave-material interaction phenomena: heating mechanisms, challenges and opportunities in material processing. Composites. Part A, Applied Science and Manufacturing, 2016, 81: 78–97
CrossRef
Google scholar
|
[27] |
Rosi L , Bartoli M , Frediani M . Microwave assisted pyrolysis of halogenated plastics recovered from waste computers. Waste Management, 2018, 73: 511–522
CrossRef
Google scholar
|
[28] |
Undri A , Rosi L , Frediani M , Frediani P . Efficient disposal of waste polyolefins through microwave assisted pyrolysis. Fuel, 2014, 116: 662–671
CrossRef
Google scholar
|
[29] |
Zhou N , Dai L , Lv Y , Li H , Deng W , Guo F , Chen P , Lei H , Ruan R . Catalytic pyrolysis of plastic wastes in a continuous microwave assisted pyrolysis system for fuel production. Chemical Engineering Journal, 2021, 418: 129412
CrossRef
Google scholar
|
[30] |
Fadhilah N A , Islam M N , Rosli R . Techno-economic analysis of sawdust and rice husk co-pyrolysis for bio-oil production. Bioresource Technology Reports, 2023, 21: 101233
CrossRef
Google scholar
|
[31] |
Shemfe M B , Gu S , Ranganathan P . Techno-economic performance analysis of biofuel production and miniature electric power generation from biomass fast pyrolysis and bio-oil upgrading. Fuel, 2015, 143: 361–372
CrossRef
Google scholar
|
[32] |
Yahya S A , Iqbal T , Omar M M , Ahmad M . Techno-economic analysis of fast pyrolysis of date palm waste for adoption in Saudi Arabia. Energies, 2021, 14(19): 6048
CrossRef
Google scholar
|
[33] |
Kulas D G , Zolghadr A , Chaudhari U S , Shonnard D R . Economic and environmental analysis of plastics pyrolysis after secondary sortation of mixed plastic waste. Journal of Cleaner Production, 2023, 384: 135542
CrossRef
Google scholar
|
[34] |
Zhu H , Saddler J , Bi X . An economic and environmental assessment of biofuel produced via microwave-assisted catalytic pyrolysis of forest residues. Energy Conversion and Management, 2022, 263: 115723
CrossRef
Google scholar
|
[35] |
Hosseinzadeh-Bandbafha H , Fallahi A , Ghasemkhani H , Shafiei M , Ghanavati H , Chong C T , Lam S S , Tabatabaei M , Aghbashlo M . Exergetic sustainability evaluation of horse manure biomass valorization by microwave pyrolysis. Fuel, 2022, 323: 124286
CrossRef
Google scholar
|
[36] |
Sun J , Tao J , Huang H , Ma R , Sun S . Promotion of bio-oil production from the microwave pyrolysis of cow dung using pretreated red mud as a bifunctional additive: parameter optimization, energy efficiency evaluation, and mechanism analysis. Environmental Research, 2023, 236: 116806
CrossRef
Google scholar
|
[37] |
Patel H , Maiti P , Maiti S . Techno-economic assessment of bio-refinery model based on co-pyrolysis of cotton boll crop-residue and plastic waste. Biofuels, Bioproducts & Biorefining, 2022, 16(1): 155–171
CrossRef
Google scholar
|
[38] |
Dai L , Zhao H , Zhou N , Cobb K , Chen P , Cheng Y , Lei H , Zou R , Wang Y , Ruan R . Catalytic microwave-assisted pyrolysis of plastic waste to produce naphtha for a circular economy. Resources, Conservation and Recycling, 2023, 198: 107154
CrossRef
Google scholar
|
[39] |
Thoharudin S S , Hsiau Y S , Chen S . Design optimization of fluidized bed pyrolysis for energy and exergy analysis using a simplified comprehensive multistep kinetic model. Energy, 2023, 276: 127615
CrossRef
Google scholar
|
[40] |
Liu Y , Xue L , Ma J , Peng C , Bai F , Li Y , Zhao J . Three-dimensional numerical simulation, energy efficiency and economic benefit estimation of oil shale in situ pyrolysis process. Geoenergy Science and Engineering, 2023, 227: 211804
CrossRef
Google scholar
|
[41] |
Fan S , Zhang Y , Liu T , Fu W , Li B . Microwave-assisted pyrolysis of polystyrene for aviation oil production. Journal of Analytical and Applied Pyrolysis, 2022, 162: 105425
CrossRef
Google scholar
|
[42] |
Fan S , Zhang Y , Cui L , Xiong Q , Maqsood T . Conversion of polystyrene plastic into aviation fuel through microwave-assisted pyrolysis as affected by iron-based microwave absorbents. ACS Sustainable Chemistry & Engineering, 2023, 11(3): 1054–1066
CrossRef
Google scholar
|
[43] |
Mahmoud Fodah A E , Ghosal M K , Behera D . Bio-oil and biochar from microwave-assisted catalytic pyrolysis of corn stover using sodium carbonate catalyst. Journal of the Energy Institute, 2021, 94: 242–251
CrossRef
Google scholar
|
[44] |
Zhao Z , Abdo S M A , Wang X , Li H , Li X , Gao X . Process intensification on co-pyrolysis of polyethylene terephthalate wastes and biomass via microwave energy: synergetic effect and roles of microwave susceptor. Journal of Analytical and Applied Pyrolysis, 2021, 158: 105239
CrossRef
Google scholar
|
[45] |
Bhattacharya M , Basak T . A review on the susceptor assisted microwave processing of materials. Energy, 2016, 97: 306–338
CrossRef
Google scholar
|
[46] |
Chandrasekaran S , Basak T , Srinivasan R . Microwave heating characteristics of graphite based powder mixtures. International Communications in Heat and Mass Transfer, 2013, 48: 22–27
CrossRef
Google scholar
|
[47] |
Peng Z , Li Z , Lin X , Yang M , Hwang J Y , Zhang Y , Li G , Jiang T . Microwave power absorption in materials for ferrous metallurgy. Journal of the Minerals Metals & Materials Society, 2017, 69(2): 178–183
CrossRef
Google scholar
|
/
〈 | 〉 |