Insight into the selective separation of CO₂ from biomass pyrolysis gas over metal-incorporated nitrogen-doped carbon materials: a first-principles study

Abstract

The composition of biomass pyrolysis gas is complex, and the selective separation of its components is crucial for its further utilization. Metal-incorporated nitrogen-doped materials exhibit enormous potential, whereas the relevant adsorption mechanism is still unclear. Herein, 16 metal-incorporated nitrogen-doped carbon materials were designed based on the density functional theory calculation, and the adsorption mechanism of pyrolysis gas components H₂, CO, CO₂, CH₄, and C₂H₆ was explored. The results indicate that metal-incorporated nitrogen-doped carbon materials generally have better adsorption effects on CO and CO₂ than on H₂, CH₄, and C₂H₆. Transition metal Mo- and alkaline earth metal Mg- and Ca-incorporated nitrogen-doped carbon materials show the potential to separate CO and CO₂. The mixed adsorption results of CO₂ and CO further indicate that when the CO₂ ratio is significantly higher than that of CO, the saturated adsorption of CO₂ will precede that of CO. Overall, the three metal-incorporated nitrogen-doped carbon materials can selectively separate CO₂, and the alkaline earth metal Mg-incorporated nitrogen-doped carbon material has the best performance. This study provides theoretical guidance for the design of carbon capture materials and lays the foundation for the efficient utilization of biomass pyrolysis gas.

Graphical abstract

Keywords

CO₂ capture / biomass pyrolysis gas / selective adsorption / carbon materials / first-principles

References

[1] Hu B , Zhang Z , Xie W , Liu J , Li Y , Zhang W , Fu H , Lu Q . Advances on the fast pyrolysis of biomass for the selective preparation of phenolic compounds. Fuel Processing Technology, 2022, 237: 107465

[2] Bruckman V J , Pumpanen J . Biochar use in global forests: opportunities and challenges. Developments in Soil Science, 2019, 36: 427–453

[3] Heidari M , Dutta A , Acharya B , Mahmud S . A review of the current knowledge and challenges of hydrothermal carbonization for biomass conversion. Journal of the Energy Institute, 2019, 92(6): 1779–1799

[4] Vuppaladadiyam A K , Varsha Vuppaladadiyam S S , Sikarwar V S , Ahmad E , Pant K K , S M , Pandey A , Bhattacharya S , Sarmah A , Leu S Y . . A critical review on biomass pyrolysis: reaction mechanisms, process modeling and potential challenges. Journal of the Energy Institute, 2023, 108: 101236

[5] Montazersadgh F , Zhang H , Alkayal A , Buckley B , Kolosz B W , Xu B , Xuan J . Electrolytic cell engineering and device optimization for electrosynthesis of e-biofuels via co-valorisation of bio-feedstocks and captured CO₂. Frontiers of Chemical Science and Engineering, 2021, 15(1): 208–219

[6] Wan S , Wang Y . A review on ex situ catalytic fast pyrolysis of biomass. Frontiers of Chemical Science and Engineering, 2014, 8(3): 280–294

[7] Nobarzad M J , Tahmasebpoor M , Heidari M , Pevida C . Theoretical and experimental study on the fluidity performance of hard-to-fluidize carbon nanotubes-based CO₂ capture sorbents. Frontiers of Chemical Science and Engineering, 2022, 16(10): 1460–1475

[8] Qie Z , Wang L , Sun F , Xiang H , Wang H , Gao J , Zhao G , Fan X . Tuning porosity of coal-derived activated carbons for CO₂ adsorption. Frontiers of Chemical Science and Engineering, 2022, 16(9): 1345–1354

[9] Mehrvarz E , Ghoreyshi A A , Jahanshahi M . Surface modification of broom sorghum-based activated carbon via functionalization with triethylenetetramine and urea for CO₂ capture enhancement. Frontiers of Chemical Science and Engineering, 2017, 11(2): 252–265

[10] Bai J , Huang J , Yu Q , Demir M , Akgul E , Altay B N , Hu X , Wang L . Fabrication of coconut shell-derived porous carbons for CO₂ adsorption application. Frontiers of Chemical Science and Engineering, 2023, 17(8): 1122–1130

[11] Wu D , Liu J , Yang Y , Zheng Y . Nitrogen/oxygen Co-doped porous carbon derived from biomass for low-pressure CO₂ capture. Industrial & Engineering Chemistry Research, 2020, 59(31): 14055–14063

[12] Hamyali H , Nosratinia F , Rashidi A , Ardjmand M . Anthracite coal-derived activated carbon as an effectiveness adsorbent for superior gas adsorption and CO₂/N₂ and CO₂/CH₄ selectivity: experimental and DFT study. Journal of Environmental Chemical Engineering, 2022, 10(1): 107007

[13] Mackie I D , DiLabio G A . CO₂ adsorption by nitrogen-doped carbon nanotubes predicted by density-functional theory with dispersion-correcting potentials. Physical Chemistry Chemical Physics, 2011, 13(7): 2780–2787

[14] Zhang J , Huang D , Shao J , Zhang X , Yang H , Zhang S , Chen H . Activation-free synthesis of nitrogen-doped biochar for enhanced adsorption of CO₂. Journal of Cleaner Production, 2022, 355: 131642

[15] Tehrani N H M H , Alivand M S , Maklavany D M , Rashidi A , Samipoorgiri M , Seif A , Yousefian Z . Novel asphaltene-derived nanoporous carbon with N-S-rich micro-mesoporous structure for superior gas adsorption: experimental and DFT study. Chemical Engineering Journal, 2019, 358: 1126–1138

[16] Choudhuri I , Patra N , Mahata A , Ahuja R , Pathak B . B–N@graphene: highly sensitive and selective gas sensor. Journal of Physical Chemistry C, 2015, 119(44): 24827–24836

[17] Li X , Xue Q , He D , Zhu L , Du Y , Xing W , Zhang T . Sulfur–nitrogen codoped graphite slit-pore for enhancing selective carbon dioxide adsorption: insights from molecular simulations. ACS Sustainable Chemistry & Engineering, 2017, 5(10): 8815–8823

[18] Abe M , Kawashima K , Kozawa K , Sakai H , Kaneko K . Amination of activated carbon and adsorption characteristics of its aminated surface. Langmuir, 2000, 16(11): 5059–5063

[19] Hu B , Liu X , Chen H , Liu J , Wu Y , Zhao L , Zhang B , Lu Q . The selective adsorption mechanism of CO₂ from biomass pyrolysis gas on N-doped carbon materials with an electric field: a first-principles study. Journal of the Energy Institute, 2023, 109: 101301

[20] Wang Y , Hu X , Guo T , Hao J , Si C , Guo Q . Efficient CO₂ adsorption and mechanism on nitrogen-doped porous carbons. Frontiers of Chemical Science and Engineering, 2021, 15(3): 493–504

[21] Lin Y C , Teng P Y , Yeh C H , Koshino M , Chiu P W , Suenaga K . Structural and chemical dynamics of pyridinic-nitrogen defects in graphene. Nano Letters, 2015, 15(11): 7408–7413

[22] Li Q , Li X , Zhang G , Jiang J . Cooperative spin transition of monodispersed FeN₃ sites within graphene induced by CO adsorption. Journal of the American Chemical Society, 2018, 140(45): 15149–15152

[23] Montejo-Alvaro F , Martinez-Espinosa J A , Rojas-Chavez H , Navarro-Ibarra D C , Cruz-Martinez H , Medina D I . CO₂ adsorption over 3d transition-metal nanoclusters supported on pyridinic N₃-doped graphene: a DFT investigation. Materials, 2022, 15(17): 6136

[24] Poldorn P , Wongnongwa Y , Mudchimo T , Jungsuttiwong S . Theoretical insights into catalytic CO₂ hydrogenation over single-atom (Fe or Ni) incorporated nitrogen-doped graphene. Journal of CO₂ Utilization, 2021, 48: 101532

[25] Zhao C , Wu H . A first-principles study on the interaction of biogas with noble metal (Rh, Pt, Pd) decorated nitrogen doped graphene as a gas sensor: a DFT study. Applied Surface Science, 2018, 435: 1199–1212

[26] Xie T , Wang P , Tian C , Zhao G , Jia J , He C , Zhao C , Wu H . The investigation of adsorption behavior of gas molecules on FeN₃-doped graphene. Journal of Sensors, 2022, 2022: 1–8

[27] Lou Z , Li W , Yuan H , Hou Y , Yang H , Wang H . Structural rule of N-coordinated single-atom catalysts for electrochemical CO₂ reduction. Journal of Materials Chemistry A, 2022, 10(7): 3585–3594

[28] Kresse G , Furthmüller J . Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Physical Review B: Condensed Matter, 1996, 54(16): 11169–11186

[29] Perdew J P , Burke K , Ernzerhof M . Generalized gradient approximation made simple. Physical Review Letters, 1996, 77(18): 3865–3868

[30] Kresse G , Joubert D . From ultrasoft pseudopotentials to the projector augmented-wave method. Physical Review B: Condensed Matter, 1999, 59(3): 1758–1775

[31] Aledealat K , Aladerah B , Obeidat A . Magnetic properties of transition-metal atomic monolayer in nickel supercell: density functional theory and monte carlo simulation. Journal of Magnetism and Magnetic Materials, 2022, 564: 170173

[32] Gong L , Zhang D , Lin C , Zhu Y , Shen Y , Zhang J , Han X , Zhang L , Xia Z . Catalytic mechanisms and design principles for single-atom catalysts in highly efficient CO₂ conversion. Advanced Energy Materials, 2019, 9(44): 1902625

[33] Lin C , Zhang L , Zhao Z , Xia Z . Design principles for covalent organic frameworks as efficient electrocatalysts in clean energy conversion and green oxidizer production. Advanced Materials, 2017, 29(17): 1606635

[34] Solovyev I V , Dederichs P H , Anisimov V I . Corrected atomic limit in the local-density approximation and the electronic structure of d impurities in Rb. Physical Review B: Condensed Matter, 1994, 50(23): 16861–16871

[35] NørskovJ KStudtFAbild-PedersenFBligaardT. Fundamental Concepts in Heterogeneous Catalysis, 1st ed. Hoboken: John Wiley & Sons, 2014, 119–122

[36] Pham T L M , Nachimuthu S , Kuo J L , Jiang J C . A DFT study of ethane activation on IrO₂(110) surface by precursor-mediated mechanism. Applied Catalysis A, General, 2017, 541: 8–14

[37] Richards A P , Haycock D , Frandsen J , Fletcher T H . A review of coal heating value correlations with application to coal char, tar, and other fuels. Fuel, 2021, 283: 118942

[38] Lopez G , Alvarez J , Amutio M , Mkhize N M , Danon B , van der Gryp P , Görgens J F , Bilbao J , Olazar M . Waste truck-tyre processing by flash pyrolysis in a conical spouted bed reactor. Energy Conversion and Management, 2017, 142: 523–532

[39] Li S , Xu S , Liu S , Yang C , Lu Q . Fast pyrolysis of biomass in free-fall reactor for hydrogen-rich gas. Fuel Processing Technology, 2004, 85(8–10): 1201–1211

[40] Shi X , Wang J . A comparative investigation into the formation behaviors of char, liquids and gases during pyrolysis of pinewood and lignocellulosic components. Bioresource Technology, 2014, 170: 262–269

[41] Wang H , Wang X , Cui Y , Xue Z , Ba Y . Slow pyrolysis polygeneration of bamboo (Phyllostachys pubescens): product yield prediction and biochar formation mechanism. Bioresource Technology, 2018, 263: 444–449

Competing interests

The authors declare that they have no competing interests.

Acknowledgements

This research was supported by the National Natural Science Foundation of China (Grant Nos. 52106241, 52276189 and 52006069), and Fundamental Research Funds for the Central Universities (Grant Nos. 2023JC009 and 2022YQ002).

Electronic Supplementary Material

Supplementary material is available in the online version of this article at https://doi.org/10.1007/s11705-024-2388-2 and is accessible for authorized users.

RIGHTS & PERMISSIONS

2024 Higher Education Press