Electrospun porous carbon nanofibers derived from bio-based phenolic resins as free-standing electrodes for high-performance supercapacitors

Yongsheng Zhang , Xiaomeng Yang , Jinpan Bao , Hang Qian , Dong Sui , Jianshe Wang , Chunbao Charles Xu , Yanfang Huang

Front. Chem. Sci. Eng. ›› 2023, Vol. 17 ›› Issue (5) : 504 -515.

PDF (5008KB)
Front. Chem. Sci. Eng. ›› 2023, Vol. 17 ›› Issue (5) : 504 -515. DOI: 10.1007/s11705-022-2260-1
RESEARCH ARTICLE
RESEARCH ARTICLE

Electrospun porous carbon nanofibers derived from bio-based phenolic resins as free-standing electrodes for high-performance supercapacitors

Author information +
History +
PDF (5008KB)

Abstract

Phenolic resins were employed to prepare electrospun porous carbon nanofibers with a high specific surface area as free-standing electrodes for high-performance supercapacitors. However, the sustainable development of conventional phenolic resin has been challenged by petroleum-based phenol and formaldehyde. Lignin with abundant phenolic hydroxyl groups is the main non-petroleum resource that can provide renewable aromatic compounds. Hence, lignin, phenol, and furfural were used to synthesize bio-based phenolic resins, and the activated carbon nanofibers were obtained by electrospinning and one-step carbonization activation. Fourier transform infrared and differential scanning calorimetry were used to characterize the structural and thermal properties. The results reveal that the apparent activation energy of the curing reaction is 89.21 kJ·mol–1 and the reaction order is 0.78. The activated carbon nanofibers show a uniform diameter, specific surface area up to 1100 m2·g–1, and total pore volume of 0.62 cm3·g–1. The electrode demonstrates a specific capacitance of 238 F·g–1 (0.1 A·g–1) and good rate capability. The symmetric supercapacitor yields a high energy density of 26.39 W·h·kg–1 at 100 W·kg–1 and an excellent capacitance retention of 98% after 10000 cycles. These results confirm that the activated carbon nanofiber from bio-based phenolic resins can be applied as electrode material for high-performance supercapacitors.

Graphical abstract

Keywords

lignin / bio-based phenolic resins / electrospinning / activated carbon nanofibers / supercapacitors

Cite this article

Download citation ▾
Yongsheng Zhang, Xiaomeng Yang, Jinpan Bao, Hang Qian, Dong Sui, Jianshe Wang, Chunbao Charles Xu, Yanfang Huang. Electrospun porous carbon nanofibers derived from bio-based phenolic resins as free-standing electrodes for high-performance supercapacitors. Front. Chem. Sci. Eng., 2023, 17(5): 504-515 DOI:10.1007/s11705-022-2260-1

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Li Z, Gadipelli S, Yang Y, He G, Guo J, Li J, Lu Y, Howard C A, Brett D J L, Parkin I P, Li F, Guo Z. Exceptional supercapacitor performance from optimized oxidation of graphene-oxide. Energy Storage Materials, 2019, 17: 12–21

[2]

Li Y, Huang J, Kang L, Tian Z, Lai F, Brett D J L, Liu T, He G. Self-assembled carbon nanoribbons with the heteroatom doping used as ultrafast charging cathodes in zinc-ion hybrid supercapacitors. Science China Materials, 2022, 65(6): 1495–1502

[3]

Sui D, Chang M, Wang H, Qian H, Yang Y, Li S, Zhang Y, Song Y. A brief review of catalytic cathode materials for Na-CO2 batteries. Catalysts, 2021, 11(5): 603–605

[4]

Zhang W, Yuan X, Yan X, You M, Jiang H, Miao J, Zhou W, Zhu Y, Cheng X. Tripotassium citrate monohydrate derived carbon nanosheets as a competent assistant to manganese dioxide with remarkable performance in the supercapacitor. Frontiers of Chemical Science and Engineering, 2022, 16(3): 420–432

[5]

Lei C, Amini N, Markoulidis F, Wilson P, Tennison S, Lekakou C. Activated carbon from phenolic resin with controlled mesoporosity for an electric double-layer capacitor (EDLC). Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2013, 1(19): 6037–6042

[6]

Ji H K, Ko Y I, Kim Y A, Kim K S, Yang C M. Sulfur-doped carbon nanotubes as a conducting agent in supercapacitor electrodes. Journal of Alloys and Compounds, 2021, 855: 157282

[7]

Li Z F, Zhang H, Liu Q, Sun L, Xie J. Fabrication of high-surface-area graphene/polyaniline nanocomposites and their application in supercapacitors. ACS Applied Materials & Interfaces, 2013, 5(7): 2685–2691

[8]

Ma C, Song Y, Shi J, Zhang D, Zhong M, Guo Q, Liu L. Phenolic-based carbon nanofiber webs prepared by electrospinning for supercapacitors. Materials Letters, 2012, 76: 211–214

[9]

Jain A, Tripathi S K. Fabrication and characterization of energy storing supercapacitor devices using coconut shell based activated charcoal electrode. Materials Science and Engineering B, 2014, 183: 54–60

[10]

Zheng Z, Gao Q. Hierarchical porous carbons prepared by an easy one-step carbonization and activation of phenol–formaldehyde resins with high performance for supercapacitors. Journal of Power Sources, 2011, 196(3): 1615–1619

[11]

Du B, Zhu H, Chai L, Cheng J, Wang X, Chen X, Zhou J, Sun R. Effect of lignin structure in different biomass resources on the performance of lignin-based carbon nanofibers as supercapacitor electrode. Industrial Crops and Products, 2021, 170: 113745

[12]

Chen W, Wang H, Lan W, Li D, Zhang A, Liu C. Construction of sugarcane bagasse-derived porous and flexible carbon nanofibers by electrospinning for supercapacitors. Industrial Crops and Products, 2021, 170: 113700

[13]

Si L, Yan K, Li C, Huang Y, Pang X, Yang X, Sui D, Zhang Y, Wang J, Charles Xu C. Binder-free SiO2 nanotubes/carbon nanofibers mat as superior anode for lithium-ion batteries. Electrochimica Acta, 2022, 404: 139747

[14]

Zhang Y, Ferdosian F, Yuan Z, Xu C. Sustainable glucose-based phenolic resin and its curing with a DGEBA epoxy resin. Journal of the Taiwan Institute of Chemical Engineers, 2017, 71: 381–387

[15]

Xi Y, Yang D, Qiu X, Wang H, Huang J, Li Q. Renewable lignin-based carbon with a remarkable electrochemical performance from potassium compound activation. Industrial Crops and Products, 2018, 124: 747–754

[16]

Cheng S, Yuan Z, Leitch M, Anderson M, Xu C. Highly efficient de-polymerization of organosolv lignin using a catalytic hydrothermal process and production of phenolic resins/adhesives with the depolymerized lignin as a substitute for phenol at a high substitution ratio. Industrial Crops and Products, 2013, 44: 315–322

[17]

Mahmood N, Xu C, Zhang Y, Huang S, Yuan Z. Sustainable bio-phenol-hydroxymethylfurfural resins using phenolated de-polymerized hydrolysis lignin and their application in bio-composites. Industrial Crops and Products, 2016, 79: 84–90

[18]

Minami E, Kawamoto H, Saka S. Reaction behavior of lignin in supercritical methanol as studied with lignin model compounds. Journal of Wood Science, 2003, 49(2): 158–165

[19]

Lee Y K, Kim D J, Kim H J, Hwang T S, Sokolov J. Activation energy and curing behavior of resol- and novolac-type phenolic resins by differential scanning calorimetry and thermogravimetric analysis. Journal of Applied Polymer Science, 2010, 89(10): 2589–2596

[20]

Zhang Y, Yuan Z, Xu C. Engineering biomass into formaldehyde-free phenolic resin for composite materials. AIChE Journal, 2015, 61(4): 1275–1283

[21]

Xu W B, Bao S P, Shen S J, Hang G P, He P S. Curing kinetics of epoxy resin-imidazole-organic montmorillonite nanocomposites determined by differential scanning calorimetry. Journal of Applied Polymer Science, 2010, 88(13): 2932–2941

[22]

Wang M, Leitch C. Synthesis of phenol-formaldehyde resol resins using organosolv pine lignins. European Polymer Journal, 2009, 45(12): 3380–3388

[23]

Khan M A, Ashraf S M, Malhotra V P. Eucalyptus bark lignin substituted phenol formaldehyde adhesives: a study on optimization of reaction parameters and characterization. Journal of Applied Polymer Science, 2004, 92(6): 3514–3523

[24]

Cheng S, D’Cruz I, Yuan Z, Wang M, Anderson M, Leitch M, Xu C C. D"Cruz I, Yuan Z, Wang M, Anderson M, Leitch M, Xu C. Use of biocrude derived from woody biomass to substitute phenol at a high-substitution level for the production of biobased phenolic resol resins. Journal of Applied Polymer Science, 2011, 121(5): 2743–2751

[25]

Zhuang Q Q, Cao J P, Zhao X Y, Wu Y, Wei X Y. Preparation of layered-porous carbon from coal tar pitch narrow fractions by single-solvent extraction for superior cycling stability electric double layer capacitor application. Journal of Colloid and Interface Science, 2020, 567: 347–356

[26]

Sui D, Xu L, Zhang H, Sun Z, Kan B, Ma Y, Chen Y. A 3D cross-linked graphene-based honeycomb carbon composite withexcellent confinement effect of organic cathode material for lithium-ion batteries. Carbon, 2020, 157: 656–662

[27]

Sui D, Wu M, Shi K, Li C, Lang J, Yang Y, Zhang X, Yan X, Chen Y. Recent progress of cathode materials for aqueous zinc-ion capacitors: carbon-based materials and beyond. Carbon, 2021, 185: 126–151

[28]

Wu F, Gao J, Zhai X, Xie M, Sun Y, Kang H, Tian Q, Qiu H. Hierarchical porous carbon microrods derived from albizia flowers for high performance supercapacitors. Carbon, 2019, 147: 242–251

[29]

Wu Y, Cao J P, Zhao X Y, Hao Z Q, Zhuang Q Q, Zhu J S, Wang X Y, Wei X Y. Preparation of porous carbons by hydrothermal carbonization and KOH activation of lignite and their performance for electric double layer capacitor. Electrochimica Acta, 2017, 252: 397–407

[30]

Dandan G, Jin Q, Ranran X, Zhen Z, Wei J. Facile synthesis of nitrogen-enriched nanoporous carbon materials for high performance supercapacitors. Journal of Colloid and Interface Science, 2019, 538: 199–208

[31]

Wang J G, Yang Y, Huang Z H, Kang F. A high-performance asymmetric supercapacitor based on carbon and carbon-MnO2 nanofiber electrodes. Carbon, 2013, 61: 190–199

[32]

Yang X, Zeng X, Han G, Sui D, Zhang Y. Preparation and performance of porous carbon nanocomposite from renewable phenolic resin and halloysite nanotube. Nanomaterials, 2020, 10(9): 1703

[33]

Hao Z Q, Cao J, Dang Y L, Wu Y, Zhao X Y, Wei X Y. Three-dimensional hierarchical porous carbon with high oxygen content derived from organic waste liquid with superior electric double layer performance. ACS Sustainable Chemistry & Engineering, 2019, 7(4): 4037–4046

[34]

Guan T, Li K, Zhao J, Zhao R, Zhang G, Zhang D, Wang J. Template-free preparation of layer-stacked hierarchical porous carbons from coal tar pitch for high performance all-solid-state supercapacitors. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2017, 5(30): 15869–15878

[35]

He X, Zhao N, Qiu J, Xiao N, Yu M, Yu C, Zhang X, Zheng M. Synthesis of hierarchical porous carbons for supercapacitors from coal tar pitch with nano-Fe2O3 as template and activation agent coupled with KOH activation. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2013, 1(33): 9440–9448

[36]

Wang W, Lv H, Du J, Chen A. Fabrication of N-doped carbon nanobelts from a polypyrrole tube by confined pyrolysis for supercapacitors. Frontiers of Chemical Science and Engineering, 2021, 15(5): 1312–1321

[37]

Zhang D, He C, Wang Y, Zhao J, Wang J, Li K. Oxygen-rich hierarchically porous carbons derived from pitch-based oxidized spheres for boosting the supercapacitive performance. Journal of Colloid and Interface Science, 2019, 540: 439–447

[38]

Yan J, Liu J, Fan Z, Wei T, Zhang L. High-performance supercapacitor electrodes based on highly corrugated graphene sheets. Carbon, 2012, 50(6): 2179–2188

[39]

Li Y, Wang G, Wei T, Fan Z, Yan P. Nitrogen and sulfur co-doped porous carbon nanosheets derived from willow catkin for supercapacitors. Nano Energy, 2016, 19: 165–175

[40]

Wang Y, Cui J, Qu Q, Ma W, Li F, Du W, Liu K, Zhang Q, He S, Huang C. Free-standing porous carbon nanofiber membranes obtained by one-step carbonization and activation for high-performance supercapacitors. Microporous and Mesoporous Materials, 2022, 329: 111545

[41]

Ma H, Chen Z, Wang X, Liu Z, Liu X. A simple route for hierarchically porous carbon derived from corn straw for supercapacitor application. Journal of Renewable and Sustainable Energy, 2019, 11(2): 024102

[42]

Lai C C, Lo C T. Preparation of nanostructural carbon nanofibers and their electrochemical performance for supercapacitors. Electrochimica Acta, 2015, 183: 85–93

[43]

Liu Y, Zhou J, Lu C. Highly flexible freestanding porous carbon nanofibers for electrodes materials of high-performance all-carbon supercapacitors. ACS Applied Materials & Interfaces, 2015, 7(42): 23515–23520

[44]

Dong Q, Wang G, Hu H, Yang J, Qian B, Ling Z, Qiu J. Ultrasound-assisted preparation of electrospun carbon nanofiber/graphene composite electrode for supercapacitors. Journal of Power Sources, 2013, 243: 350–353

[45]

Chen L F, Zhang X D, Liang H W, Kong M, Guan Q F, Chen P, Wu Z Y, Yu S H. Synthesis of nitrogen-doped porous carbon nanofibers as an efficient electrode material for supercapacitors. ACS Nano, 2012, 6(8): 7092–7102

[46]

Kim C, Btn N, Yang K S, Kojima M, Kim Y A, Kim Y J, Endo M, Yang S C. Self-sustained thin webs consisting of porous carbon nanofibers for supercapacitors via the electrospinning of polyacrylonitrile solutions containing zinc chloride. Advanced Materials, 2010, 19(17): 2341–2346

RIGHTS & PERMISSIONS

Higher Education Press

AI Summary AI Mindmap
PDF (5008KB)

Supplementary files

FCE-22085-OF-ZY_suppl_1

4871

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/