Computational design of structured chemical products

Abstract

In chemical product design, the aim is to formulate a product with desired performance. Ingredients and internal product structure are two key drivers of product performance with direct impact on the mechanical, electrical, and thermal properties. Thus, there is a keen interest in elucidating the dependence of product performance on ingredients, structure, and the manufacturing process to form the structure. Design of product structure, particularly microstructure, is an intrinsically complex problem that involves different phases of different physicochemical properties, mass fraction, morphology, size distribution, and interconnectivity. Recently, computational methods have emerged that assist systematic microstructure quantification and prediction. The objective of this paper is to review these computational methods and to show how these methods as well as other developments in product design can work seamlessly in a proposed performance, ingredients, structure, and manufacturing process framework for the design of structured chemical products. It begins with the desired target properties and key ingredients. This is followed by computation for microstructure and then selection of processing steps to realize this microstructure. The framework is illustrated with the design of nanodielectric and die attach adhesive products.

Graphical abstract

Keywords

product design / performance / ingredients / structure / manufacturing process framework / structured chemical products / microstructure design

References

[1] Cussler E L, Moggridge G D. Chemical Product Design. 1st ed. Cambridge: Cambridge University Press, 2001, 1–416

[2] Gani R. Chemical product design: challenges and opportunities. Computers & Chemical Engineering, 2004, 28: 2441–2457

[3] Costa R, Moggridge G D, Saraiva P M. Chemical product engineering. An emerging paradigm within chemical engineering. AIChE Journal, 2006, 52: 1976–1986

[4] Hill M. Chemical product engineering—the third paradigm. Computers & Chemical Engineering, 2009, 33: 947–953

[5] Smith B V, Ierapepritou M G. Integrative chemical product design strategies: reflecting industry trends and challenges. Computers & Chemical Engineering, 2010, 34: 857–865

[6] Ng K M, Gani R. Chemical product design: advances in and proposed directions for research and teaching. Computers & Chemical Engineering, 2019, 126: 147–156

[7] Olson G B. Designing a new material world. Science, 2000, 288: 993–998

[8] Wibowo C, Ng K M. Product-oriented process synthesis and development: creams and pastes. AIChE Journal, 2001, 47: 2746–2767

[9] Wibowo C, Ng K M. Product-centered processing: manufacture of chemical-based consumer products. AIChE Journal, 2002, 48: 1212–1230

[10] Ng K M, Gani R, Johansen K D. Chemical Product Design: Towards a Perspective Through Case Studies. 1st ed. Amsterdam: Elsevier, 2007, 165–490

[11] Seider W D, Widagdo S, Seader J D, Lewin D R. Perspectives on chemical product and process design. Computers & Chemical Engineering, 2009, 33: 930–935

[12] Smith B V, Ierapepritou M G. Framework for consumer-integrated optimal product design. Industrial & Engineering Chemistry Research, 2009, 48: 8566–8574

[13] Gani R, Ng K M. Product design—molecules, devices, functional products, and formulated products. Computers & Chemical Engineering, 2015, 81: 70–79

[14] Bernardo F P, Saraiva P M. A Conceptual model for chemical product design. AIChE Journal, 2015, 61: 802–815

[15] Mattei M, Kontogeorgis G M, Gani R. A comprehensive framework for surfactant selection and design for emulsion based chemical product design. Fluid Phase Equilibria, 2014, 362: 288–299

[16] Cheng Y S, Lam K W, Ng K M, Ko R K M, Wibowo C. An integrative approach to product development—a skin-care cream. Computers & Chemical Engineering, 2009, 33: 1097–1113

[17] Bagajewicz M J. On the role of microeconomics, planning, and finances in product design. AIChE Journal, 2007, 53: 3155–3170

[18] Fung K Y, Ng K M, Zhang L, Gani R. A grand model for chemical product design. Computers & Chemical Engineering, 2016, 91: 15–27

[19] Zhang L, Fung K Y, Zhang X, Fung H K, Ng K M. An integrated framework for designing formulated products. Computers & Chemical Engineering, 2017, 107: 61–76

[20] Chan Y C, Fung K Y, Ng K M. Product design: a pricing framework accounting for product quality and consumer awareness. AIChE Journal, 2018, 64: 2462–2471

[21] Zhang X, Zhang L, Fung K Y, Rangaiah G P, Ng K M. Product design: impact of government policy and consumer preference on company profit and corporate social responsibility. Computers & Chemical Engineering, 2018, 118: 118–131

[22] Zhang X, Zhang L, Fung K Y, Ng K M. Product design: incorporating make-or-buy analysis and supplier selection. Chemical Engineering Science, 2019, 202: 357–372

[23] Torquato S. Random heterogeneous materials: microstructure and macroscopic properties. Interdisciplinary Applied Mathematics, 2002, 16: 1–656

[24] Fullwood D T, Niezgoda S R, Adams B L, Kalidindi S R. Microstructure sensitive design for performance optimization. Progress in Materials Science, 2010, 55: 477–562

[25] Brough D B, Wheeler D, Warren J A, Kalidindi S R. Microstructure-based knowledge systems for capturing process-structure evolution linkages. Current Opinion in Solid State and Materials Science, 2017, 21: 129–140

[26] Cecen A, Dai H, Yabansu Y C, Kalidindi S R, Song L. Material structure-property linkages using three-dimensional convolutional neural networks. Acta Materialia, 2018, 146: 76–84

[27] Bostanabad R, Zhang Y, Li X, Kearney T, Brinson L C, Apley D W, Liu W K, Chen W. Computational microstructure characterization and reconstruction: review of the state-of-the-art techniques. Progress in Materials Science, 2018, 95: 1–41

[28] Mushtaq F. Computation-based microstructure design of structured chemical products. Dissertation for the Doctoral Degree. Hong Kong: The Hong Kong University of Science and Technology, 2020, 50–90

[29] Lu D, Liu C, Lang X, Wang B, Li Z, Lee W M P, Lee S W R. Enhancement of thermal conductivity of die attach adhesive (DAAs) using nanomaterials for high brightness light emitting diode (HBLED). In: 2011 IEEE 61st Electronic Components and Technology Conference (ECTC), Lake Buena Vista, FL: IEEE, 2011, 667–672

[30] Anandraj J, Joshi M G. Fabrication, performance and applications of integrated nanodielectric properties of materials: a review. Composite Interfaces, 2018, 25: 455–489

[31] Muñoz V, Buffa F, Molinari F, Hermida L G, García J J, Abraham G A. Electrospun ethylcellulose-based nanofibrous mats with insect-repellent activity. Materials Letters, 2019, 253: 289–292

[32] Cao L, Fu Q, Si Y, Ding B, Yu J. Porous materials for sound absorption. Composites Communications, 2018, 10: 25–35

[33] Li G R, Wang L S, Yang G J. Achieving self-enhanced thermal barrier performance through a novel hybrid-layered coating design. Materials & Design, 2019, 167: 107647

[34] Lee B, Liu J Z, Sun B, Shen C Y, Dai G C. Thermally conductive and electrically insulating EVA composite encapsulants for solar photovoltaic (PV) cell. Express Polymer Letters, 2008, 2: 357–363

[35] Cui C H, Yan D X, Pang H, Xu X, Jia L C, Li Z M. Formation of a segregated electrically conductive network structure in a low-melt-viscosity polymer for highly efficient electromagnetic interference shielding. ACS Sustainable Chemistry & Engineering, 2016, 4: 4137–4145

[36] Wang M, Zhang K, Dai X X, Li Y, Guo J, Liu H, Li G H, Tan Y J, Zeng J B, Guo Z. Enhanced electrical conductivity and piezoresistive sensing in multi-wall carbon nanotubes/polydimethylsiloxane nanocomposites via the construction of a self-segregated structure. Nanoscale, 2017, 9: 11017

[37] Conte E, Gani R, Ng K M. Design of formulated products: a systematic methodology. AIChE Journal, 2011, 57: 2431–2449

[38] Conte E, Gani R, Cheng Y S, Ng K M. Design of formulated products: experimental component. AIChE Journal, 2012, 58: 173–189

[39] Zhang X, Zhou T, Zhang L, Fung K Y, Ng K M. Food product design: a hybrid machine learning and mechanistic modeling approach. Industrial & Engineering Chemistry Research, 2019, 58: 16743–16752

[40] Király A, Ronkay F. Effect of filler dispersion on the electrical conductivity and mechanical properties of carbon/polypropylene composites. Polymer Composites, 2013, 34: 1195–1203

[41] Fu S, Sun Z, Huang P, Li Y, Hu N. Some basic aspects of polymer nanocomposites: a critical review. Nano Materials Science, 2019, 1: 2–30

[42] Yang X Y, Chen L H, Li Y, Rooke J R, Sanchezc C, Su B L. Hierarchically porous materials: synthesis strategies and structure design. Chemical Society Reviews, 2017, 46: 481–558

[43] Slater A G, Cooper A I. Function-led design of new porous materials. Science, 2015, 348: aaa8075

[44] Liu Q, Ye F, Gao Y, Liu S, Yang H, Zhou Z. Fabrication of a new SiC/2024Al co-continuous composite with lamellar microstructure and high mechanical properties. Journal of Alloys and Compounds, 2014, 585: 146–153

[45] Pang H, Xu L, Yan D X, Li Z M. Conductive polymer composites with segregated structures. Progress in Polymer Science, 2014, 39: 1908–1933

[46] Pang H, Chen C, Bao Y, Chen J, Ji X, Lei J, Li Z M. Electrically conductive carbon nanotube/ultrahigh molecular weight polyethylene composites with segregated and double percolated structure. Materials Letters, 2012, 79: 96–99

[47] Wang M, Pan N. Predictions of effective physical properties of complex multiphase materials. Materials Science and Engineering, 2008, 63: 1–30

[48] Nan C W, Birringer R, Clarke D R, Gleiter H. Effective thermal conductivity of particulate composites with interfacial thermal resistance. Journal of Applied Physics, 1997, 81: 6692–6699

[49] Nan C W, Shi Z, Lin Y. A simple model for thermal conductivity of carbon nanotube-based composites. Chemical Physics Letters, 2003, 37: 666–669

[50] Singh K J, Singh R, Chaudhary D R. Heat conduction and a porosity correction term for spherical and cubic particles in a simple cubic packing. Journal of Physics. D, Applied Physics, 1998, 31: 1681–1687

[51] Carson J K, Lovatt S J, Tanner D J, Cleland A C. Thermal conductivity bounds for isotropic, porous materials. International Journal of Heat and Mass Transfer, 2005, 48: 2150–2158

[52] Wang J F, Carson J K, North M F, Cleland D J. A new approach to modelling the effective thermal conductivity of heterogeneous materials. International Journal of Heat and Mass Transfer, 2006, 49: 3075–3083

[53] Agari Y, Uno T. Estimation on thermal conductivities of filled polymers. Journal of Applied Polymer Science, 1986, 32: 5705–5712

[54] Liang X G, Ji X. Thermal conductance of randomly oriented composites of thin layers. International Journal of Heat and Mass Transfer, 2000, 43: 3633–3640

[55] Mushtaq F, Zhang X, Fung K Y, Ng K M. Product design: an optimization-based approach for targeting of particulate composite microstructure. Computers & Chemical Engineering, 2020, 140: doi:10.1016/j.compchemeng.2020.106975

[56] Liu Y, Greene M S, Chen W, Dikin D A, Liu W K. Computational microstructure characterization and reconstruction for stochastic multiscale material design. Computer Aided Design, 2013, 45: 65–76

[57] Mukherjee P P, Wang C Y. Stochastic microstructure reconstruction and direct numerical simulation of the PEFC catalyst layer. Journal of the Electrochemical Society, 2006, 153: A840–A849

[58] Sheidaei A, Baniassadi M, Banu M, Askeland P, Pahlavanpour M, Kuuttila N, Pourboghrat F, Drzal L T, Garmestani H. 3-D microstructure reconstruction of polymer nano-composite using FIBSEM and statistical correlation function. Composites Science and Technology, 2013, 80: 47–54

[59] Wu W, Jiang F. Microstructure reconstruction and characterization of PEMFC electrodes. International Journal of Hydrogen Energy, 2014, 39: 15894–15906

[60] Derossi A, Gerke K M, Karsanina M V, Nicolai B, Verboven P, Severini C. Mimicking 3D food microstructure using limited statistical information from 2D cross-sectional image. Journal of Food Engineering, 2019, 241: 116–126

[61] Xu H, Li Y, Brinson C, Chen W. A descriptor-based design methodology for developing heterogeneous microstructural materials system. Journal of Mechanical Design, 2014, 136: 051007

[62] Zhang Y, Zhao H, Hassinger I, Brinson L C, Schadler L, Chen W. Microstructure reconstruction and structural equation modeling for computational design of nanodielectrics. Integrating Materials and Manufacturing Innovation, 2015, 4: 209–234

[63] Hassinger I, Li X, Zhao H, Xu H, Huang Y, Prasad A, Schadler L, Chen W, Brinson L C. Toward the development of a quantitative tool for predicting dispersion of nanocomposites under non-equilibrium processing conditions. Journal of Materials Science, 2016, 51: 4238–4249

[64] Lu W, Xiao R, Yang J, Li H, Zhang W. Data mining-aided materials discovery and optimization. Journal of Materiomics, 2017, 3: 191–201

[65] Zhou T, Song Z, Sundmacher K. Big data creates new opportunities for materials research: a review on methods and applications of machine learning for materials design. Engineering, 2019, 5: 1017–1026

[66] Gu G X, Chen C T, Richmond D J, Buehler M J. Bioinspired hierarchical composite design using machine learning: simulation, additive manufacturing, and experiment. Materials Horizons, 2018, 5: 939–945

[67] Gu G H, Noh J, Kim I, Jung Y. Machine learning for renewable energy materials. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2019, 7: 17096–17117

[68] Besseris G J. Taguchi-generalized regression neural network micro-screening for physical and sensory characteristics of bread. Heliyon, 2018, 3: e00551

[69] Bendsøe M P, Sigmund O. Topology Optimization: Theory, Methods, and Applications. 2nd ed. New York: Springer-Verlag Berlin Heidelberg, 2004, 1–318

[70] Suzuki K, Kikuchi N. A homogenization method for shape and topology optimization. Computer Methods in Applied Mechanics and Engineering, 1991, 93: 291–318

[71] Bendsøe M P, Sigmund O. Material interpolation schemes in topology optimization. Archive of Applied Mechanics, 1999, 69: 635–654

[72] Xie Y M, Steven G P. A simple evolutionary procedure for structural optimization. Computers & Structures, 1993, 49: 885–896

[73] Wang M Y, Wang X, Guo D. A level set method for structural topology optimization. Computer Methods in Applied Mechanics and Engineering, 2003, 192: 227–246

[74] Murray W, Ng K M. An algorithm for nonlinear optimization problems with binary variables. Computational Optimization and Applications, 2010, 47: 257–288

[75] Xia L, Breitkopf P. Multiscale structural topology optimization with an approximate constitutive model for local material microstructure. Computer Methods in Applied Mechanics and Engineering, 2015, 286: 147–167

[76] Sigmund O, Maute K. Topology optimization approaches. Structural and Multidisciplinary Optimization, 2013, 48: 1031–1055

[77] Zheng J, Luo Z, Li H, Jiang C. Robust topology optimization for cellular composites with hybrid uncertainties. International Journal for Numerical Methods in Engineering, 2018, 115: 695–713

[78] Chu S, Gao L, Xia M, Li H. Design of sandwich panels with truss cores using explicit topology optimization. Composite Structures, 2019, 210: 892–905

[79] Hu M, Feng J, Ng K M. Thermally conductive PP/AlN composites with a 3-D segregated structure. Composites Science and Technology, 2015, 110: 26–34

[80] Adams B L, Henrie A, Henrie B, Lyon M, Kalidindi S R, Garmestani H. Microstructure-sensitive design of a compliant beam. Journal of the Mechanics and Physics of Solids, 2001, 49: 1639–1663

[81] Tan D, Irwin P. Polymer Based Nanodielectric Composites, Advances in Ceramics—Electric and Magnetic Ceramics, Bioceramics, Ceramics and Environment. London: IntechOpen, 2011, 115–132

[82] Lee D W, Yoo B R. Advanced silica/polymer composites: materials and applications. Journal of Industrial and Engineering Chemistry, 2016, 38: 1–12

[83] Yu Z Q, You S L, Baier H. Effect of organosilane coupling agents on microstructure and properties of nanosilica/epoxy composites. Polymer Composites, 2012, 33: 1516–1524

[84] Tanaka T, Montanari G C, Mülhaupt R. Polymer nanocomposites as dielectrics and electrical insulation-perspectives for processing technologies, material characterization and future applications. IEEE Transactions on Dielectrics and Electrical Insulation, 2004, 11: 763–784

[85] Cai Z, Wang X, Luo B, Hong W, Wu L, Li L. Dielectric response and breakdown behavior of polymer-ceramic nanocomposites: the effect of nanoparticle distribution. Composites Science and Technology, 2017, 145: 105–113

[86] Sarami M A, Moghadam M, Gilani A G. Modified dielectric permittivity models for binary liquid mixture. Journal of Molecular Liquids, 2019, 277: 546–555

[87] Bellucci F, Fabiani D, Montanari G C, Testa L. The processing of nanocomposites. In: Dielectric Polymer Nanocomposites. New York: Springer Science and Business Media, 2010, 31–64

[88] Seider W D, Lewin D R, Seader J D, Widegado S, Gani R, Ng K M. Product and Process Design Principles: Synthesis, Analysis and Evaluation. 4th ed. New York: Wiley, 2017, 674–681

[89] Romero A S, Chen B. Strategies for the preparation of polymer composites with complex alignment of the dispersed phase. Nanocomposites, 2018, 4: 137–155

RIGHTS & PERMISSIONS

2021 Higher Education Press