Electrodeposited porous Pb electrode with improved electrocatalytic performance for the electroreduction of CO₂ to formic acid

Abstract

A porous Pb foam was fabricated electrochemically at a copper substrate and then used as the cathode for the electroreduction of CO₂. The surface morphology and composition of the porous Pb electrode was characterized by scanning electron microscopy, X-ray diffraction, transmission electron microscopy and selected area electron diffraction. The honeycomb-like porous structure was composed of needle-like Pb deposits. Cyclic voltammetry studies demonstrated that the porous Pb electrode had better electrocatalytic performance for the formation of formic acid from CO₂ compared with a Pb plate electrode. The increase in current density was due to the large surface area of the porous Pb electrode, which provides more active sites on the electrode surface. The improved formic acid selectivity was due to the morphology of the roughened surface, which contains significantly more low-coordination sites which are more active for CO₂ reduction. The highest current efficiency for formic acid was 96.8% at -1.7 V versus saturated calomel electrode at 5 °C. This porous Pb electrode with good catalytic abilities represents a new 3D porous material with applications for the electroreduction of CO₂.

Graphical abstract

Keywords

electrodeposited porous Pb / carbon dioxide / electroreduction / formic acid

References

[1] Enthaler S, von Langermann J, Schmidt T. Carbon dioxide and formic acid—the couple for environmental-friendly hydrogen storage. Energy & Environmental Science, 2011, 3(9): 1207–1217

[2] Todoroki M, Hara K, Kudo A, Sakata T. Electrochemical reduction of high pressure CO₂ at Pb, Hg and In electrodes in an aqueous KHCO₃ solution. Journal of Electroanalytical Chemistry, 1995, 394(1–2): 199–203

[3] Köleli F, Atilan T, Palamut N, Gizir A M, Aydin R, Hamann C H. Electrochemical reduction of CO₂ at Pb- and Sn-electrodes in a fixed-bed reactor in aqueous K₂CO₃ and KHCO₃ media. Journal of Applied Electrochemistry, 2003, 33(5): 447–450

[4] Machunda R L, Ju H, Lee J. Electrocatalytic reduction of CO₂ gas at Sn based gas diffusion electrode. Current Applied Physics, 2011, 11(4): 986–988

[5] Hara K, Kudo A, Sakata T, Hiramoto M, Watanabe M, Sakata T. Electrochemical reduction of carbon dioxide under high pressure on various electrodes in an aqueous electrolyte. Journal of Electroanalytical Chemistry, 1995, 391(1–2): 141–147

[6] Hara K, Kudo A, Sakata T, Hiramoto M, Watanabe M, Sakata T. Carbon dioxide reduction at low temperature on various metal electrodes. Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, 1989, 260(2): 441–445

[7] Tang W, Peterson A A, Varela A S, Jovanov Z P, Bech L, Durand W J, Dahl S, Nørskovb J K, Chorkendorff I. The importance of surface morphology in controlling the selectivity of polycrystalline copper for CO₂ electroreduction. Physical Chemistry Chemical Physics, 2012, 14(1): 76–81

[8] Innocent B, Liaigre D, Pasquier D, Ropital F, Léger J M, Kokoh K B. Electro-reduction of carbon dioxide to formate on lead electrode in aqueous medium. Journal of Applied Electrochemistry, 2009, 39(2): 227–232

[9] Kwon Y, Lee J. Formic acid from carbon dioxide on nanolayered electrocatalyst. Electrocatalysis, 2010, 1(2–3): 108–115

[10] Machunda R L, Lee J G, Lee J. Microstructural surface changes of electrodeposited Pb on gas diffusion electrode during electroreduction of gas-phase CO₂. Surface and Interface Analysis, 2010, 42(6–7): 564–567

[11] Köleli F, Balun D. Reduction of CO₂ under high pressure and high temperature on Pb-granule electrodes in a fixed-bed reactor in aqueous medium. Applied Catalysis A, General, 2004, 274(1–2): 237–242

[12] Rolison D R, Long J W, Lytle J C, Fischer A E, Rhodes C P, McEvoy T M, Bourg M E, Lubers A M. Multifunctional 3D nanoarchitectures for energy storage and conversion. Chemical Society Reviews, 2009, 38(1): 226–252

[13] Kang B, Ceder G. Battery materials for ultrafast charging and discharging. Nature, 2009, 458(7235): 190–193

[14] Berube V, Radtke G, Dresselhaus M, Chen G. Size effects on the hydrogen storage properties of nanostructured metal hydrides: A review. International Journal of Energy Research, 2007, 31(6–7): 637–663

[15] Nishizawa M, Menon V P, Martin C R. Metal nanotubule membranes with electrochemically switchable ion-transport selectivity. Science, 1995, 268(5211): 700–702

[16] Lee J, Sohn K, Hyeon T. Fabrication of novel mesocellular carbon foams with uniform ultralarge mesopores. Journal of the American Chemical Society, 2001, 123(21): 5146–5147

[17] Shin H C, Dong J, Liu M. Nanoporous structures prepared by an electrochemical deposition process. Advanced Materials, 2003, 15(19): 1610–1614

[18] Shin H C, Liu M. Copper foam structures with highly porous nanostructured walls. Chemistry of Materials, 2004, 16(25): 5460–5464

[19] Li Y, Jia W Z, Song Y Y, Xia X H. Superhydrophobicity of 3D porous copper films prepared using the hydrogen bubble dynamic template. Chemistry of Materials, 2007, 19(25): 5758–5764

[20] Nam D H, Kim R H, Han D W, Kwon H S. Electrochemical performances of Sn anode electrodeposited on porous Cu foam for Li-ion batteries. Electrochimica Acta, 2012, 66: 126–132

[21] Cherevko S, Chung C H. Impact of key deposition parameters on the morphology of silver foams prepared by dynamic hydrogen template deposition. Electrochimica Acta, 2010, 55(22): 6383– 6390

[22] Xing X L, Cherevko S, Chung C H. Porous Pd films as effective ethanol oxidation electrocatalysts in alkaline medium. Materials Chemistry and Physics, 2011, 126(1–2): 36–40

[23] Cherevko S, Chung C H. Direct electrodeposition of nanoporous gold with controlled multimodal pore size distribution. Electrochemistry Communications, 2011, 13(1): 16–19

[24] Shin H C, Liu M. Three-dimensional porous copper-tin alloy electrodes for rechargeable lithium batteries. Advanced Functional Materials, 2005, 15(4): 582–586

[25] Ni Y H, Zhang Y M, Hong J M. Hierarchical Pb microstructures: A facile electrochemical synthesis, shape evolution and influencing factors. CrystEngComm, 2011, 13(3): 934–940

[26] Nam D H, Kim R H, Han D W, Kim J H, Kwon H S. Effects of (NH₄)₂SO₄ and BTA on the nanostructure of copper foam prepared by electrodeposition. Electrochimica Acta, 2011, 56(22): 9397–9405

[27] Hori Y. Electrochemical CO₂ reduction on metal electrodes. New York: Springer, 2008, 89–189

[28] Kaneco S, Hiei N, Xing Y, Katsumata H, Ohnishi H, Suzuki T, Ohta K. Electrochemical conversion of carbon dioxide to methane in aqueous NaHCO₃solution at less than 273 K. Electrochimica Acta, 2002, 48(1): 51–55

[29] Kaneco S, Iiba K, Ohta K, Mizuno T, Saji A. Electrochemical reduction of CO₂ on Au in KOH + methanol at low temperature. Journal of Electroanalytical Chemistry, 1998, 441(1–2): 215–220

Acknowledgements

The work was supported by the National Natural Science Foundation of China (Grant No. 21206117) and the Program of Introducing Talents of Discipline to Universities, China (No. B06006).

RIGHTS & PERMISSIONS

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg