3D printing of customized functional devices for smart biomedical systems

Abstract

The escalating demands for smart biomedical systems ignite a significantly growing influence of three-dimensional (3D) printing technology. Recognized as a revolutionary and potent fabrication tool, 3D printing possesses unparalleled capabilities for generating customized functional devices boasting intricate and meticulously controlled architectures while enabling the integration of multiple functional materials. These distinctive advantages arouse a growing inclination toward customization and miniaturization, thereby facilitating the development of cutting-edge biomedical systems. In this comprehensive review, the prevalent 3D printing technologies employed in biomedical applications are presented. Moreover, focused attention is paid to the latest advancements in harnessing 3D printing to fabricate smart biomedical systems, with specific emphasis on exemplary ongoing research encompassing biomedical examination systems, biomedical treatment systems, as well as veterinary medicine. In addition to illuminating the promising potential inherent in 3D printing for this rapidly evolving field, the prevailing challenges impeding its further progression are also discussed. By shedding light on recent achievements and persisting obstacles, this review aims to inspire future breakthroughs in the realm of smart biomedical systems.

Keywords

3D printing / biomedical examination / biomedical treatment / smart biomedical systems / veterinarian medicine

References

[1] Zhang X, Mehvish D, Yang H. Implantable and biodegradable closed-loop devices for autonomous electrotherapy. SmartMat. 2023; 4(3): e1172.

[2] Wang W, Pang J, Su J, et al. Applications of nanogenerators for biomedical engineering and healthcare systems. InfoMat. 2022; 4(2): e12262.

[3] Ali MA, Hu C, Yttri EA, Panat R. Recent advances in 3D printing of biomedical sensing devices. Adv Funct Mater. 2022; 32(9): 2107671.

[4] Liaw C-Y, Guvendiren M. Current and emerging applications of 3D printing in medicine. Biofabrication. 2017; 9(2): 024102.

[5] Larson NM, Mueller J, Chortos A, Davidson ZS, Clarke DR, Lewis JA. Rotational multimaterial printing of filaments with subvoxel control. Nature. 2023; 613(7945): 682-688.

[6] Huang J, Huang X, Wu P. Readily prepared and processed multifunctional MXene nanocomposite hydrogels for smart electronics. SmartMat. 2024; 5(2): e1228.

[7] Smith TM, Kantzos CA, Zarkevich NA, et al. A 3D printable alloy designed for extreme environments. Nature. 2023; 617: 513-518.

[8] Pan J-A, Talapin DV. 3D-printing nanocrystals with light. Science. 2022; 377(6610): 1046-1047.

[9] Feng J, Su BL, Xia H, et al. Printed aerogels: chemistry, processing, and applications. Chem Soc Rev. 2021; 50(6): 3842-3888.

[10] Yang H, He Z, Zhang M, et al. Reshaping the material research paradigm of electrochemical energy storage and conversion by machine learning. EcoMat. 2023; 5(5): e12330.

[11] Yang H, Zhou Y, Chen K, et al. Effects of PbO₂/Pb₃O₄ ratio alteration for enhanced electrochemical advanced oxidation performance. J Solid State Chem. 2021; 301: 122277.

[12] Xie F, Cui X, Zhi X, et al. A general approach to 3D-printed single-atom catalysts. Nat Synthesis. 2023; 2(2): 129-139.

[13] Qiu J, Zhao H, Lei Y. Emerging smart design of electrodes for micro-supercapacitors: a review. SmartMat. 2022; 3(3): 447-473.

[14] Hodonou C, Balazinski M, Brochu M, Mascle C. Material-design-process selection methodology for aircraft structural components: application to additive vs subtractive manufacturing processes. Int J Adv Manuf Technol. 2019; 103: 1509-1517.

[15] Hart KR, Frketic JB, Brown JR. Recycling meal-ready-to-eat (MRE) pouches into polymer filament for material extrusion additive manufacturing. Addit Manuf. 2018; 21: 536-543.

[16] Choong YYC, Tan HW, Patel DC, et al. The global rise of 3D printing during the COVID-19 pandemic. Nat Rev Mater. 2020; 5(9): 637-639.

[17] Koffler J, Zhu W, Qu X, et al. Biomimetic 3D-printed scaffolds for spinal cord injury repair. Nat Med. 2019; 25(2): 263-269.

[18] Abdullah KA, Reed W. 3D printing in medical imaging and healthcare services. J Med Radiat Sci. 2018; 65(3): 237-239.

[19] McHugh KJ, Nguyen TD, Linehan AR, et al. Fabrication of fillable microparticles and other complex 3D microstructures. Science. 2017; 357(6356): 1138-1142.

[20] Duraivel S, Laurent D, Rajon DA, et al. A silicone-based support material eliminates interfacial instabilities in 3D silicone printing. Science. 2023; 379(6638): 1248-1252.

[21] Li M, Zhou S, Cheng L, et al. 3D printed supercapacitor: techniques, materials, designs, and applications. Adv Funct Mater. 2023; 33(1): 2208034.

[22] Yang H, Wan Y, Sun K, et al. Reconciling mass loading and gravimetric performance of MnO₂ cathodes by 3D-printed carbon structures for zinc-ion batteries. Adv Funct Mater. 2023; 33(26): 2215076.

[23] Su M, Song Y. Printable smart materials and devices: strategies and applications. Chem Rev. 2022; 122(5): 5144-5164.

[24] Lyu Z, Lim GJH, Koh JJ, et al. Design and manufacture of 3D-printed batteries. Joule. 2021; 5(1): 89-114.

[25] Yang H, Feng Z, Teng X, Guan L, Hu H, Wu M. Three-dimensional printing of high-mass loading electrodes for energy storage applications. InfoMat. 2021; 3(6): 631-647.

[26] Xue X, Lin D, Li Y. Low tortuosity 3D-printed structures enhance reaction kinetics in electrochemical energy storage and electrocatalysis. Small Struct. 2022; 3(12): 2200159.

[27] Park S, Shou W, Makatura L, Matusik W, Fu K. 3D printing of polymer composites: materials, processes, and applications. Matter. 2022; 5(1): 43-76.

[28] Saadi MASR, Maguire A, Pottackal NT, et al. Direct ink writing: a 3D printing technology for diverse materials. Adv Mater. 2022; 34(28): 2108855.

[29] Wang X, Jiang M, Zhou Z, Gou J, Hui D. 3D printing of polymer matrix composites: a review and prospective. Compos Pt B Eng. 2017; 110: 442-458.

[30] Guillaume O, Geven MA, Varjas V, et al. Orbital floor repair using patient specific osteoinductive implant made by stereolithography. Biomaterials. 2020; 233: 119721.

[31] Adhikari J, Roy A, Das A, et al. Effects of processing parameters of 3D bioprinting on the cellular activity of bioinks. Macromol Biosci. 2021; 21(1): 2000179.

[32] Babu JJ, Mehrpouya M, Pijper TC, Willemsen G, Vaneker T. An experimental study of downfacing surfaces in selective laser melting. Adv Eng Mater. 2022; 24(8): 2101562.

[33] Lee L, Burnett AM, Panos JG, et al. 3-D printed spectacles: potential, challenges and the future. Clin Exp Opt. 2020; 103(5): 590-596.

[34] Yang H, Fang L, Yuan Z, et al. Machine learning guided 3D printing of carbon microlattices with customized performance for supercapacitive energy storage. Carbon. 2023; 201: 408-414.

[35] Gratson GM, García-Santamaría F, Lousse V, et al. Direct-write assembly of three-dimensional photonic crystals: conversion of polymer scaffolds to silicon hollow-woodpile structures. Adv Mater. 2006; 18(4): 461-465.

[36] Li M, Zhou S, Cheng L, et al. 3D printed supercapacitor: techniques, materials, designs, and applications. Adv Funct Mater. 2022; 33(1): 2208034.

[37] Hansen CJ, Saksena R, Kolesky DB, et al. High-throughput printing via microvascular multinozzle arrays. Adv Mater. 2013; 25(1): 96-102.

[38] Skylar-Scott MA, Mueller J, Visser CW, Lewis JA. Voxelated soft matter via multimaterial multinozzle 3D printing. Nature. 2019; 575(7782): 330-335.

[39] Siebert L, Wolff N, Ababii N, et al. Facile fabrication of semiconducting oxide nanostructures by direct ink writing of readily available metal microparticles and their application as low power acetone gas sensors. Nano Energy. 2020; 70: 104420.

[40] Kachit M, Kopp A, Adrien J, Maire E, Boulnat X. Direct-ink writing and compression behavior by in situ micro-tomography of architectured 316L scaffolds with a two-scale porosity. J Mater Res Technol. 2022; 20: 1341-1351.

[41] Xu C, Yu S, Wu W, Liu Q, Ren L. Direct ink writing of Fe bone implants with independently adjustable structural porosity and mechanical properties. Addit Manuf. 2022; 51: 102589.

[42] Zhang F, Wei M, Viswanathan VV, et al. 3D printing technologies for electrochemical energy storage. Nano Energy. 2017; 40: 418-431.

[43] Chen MY, Skewes J, Woodruff MA, Dasgupta P, Rukin NJ. Multi-colour extrusion fused deposition modelling: a low-cost 3D printing method for anatomical prostate cancer models. Sci Rep. 2020; 10(1): 10004.

[44] Carneiro OS, Silva AF, Gomes R. Fused deposition modeling with polypropylene. Mater Des. 2015; 83: 768-776.

[45] Fijoł N, Aguilar-Sánchez A, Mathew AP. 3D-printable biopolymer-based materials for water treatment: a review. Chem Eng J. 2022; 430: 132964.

[46] Filippou V, Tsoumpas C. Recent advances on the development of phantoms using 3D printing for imaging with CT, MRI, PET, SPECT, and ultrasound. Med Phys. 2018; 45(9): e740-e760.

[47] Vyavahare S, Teraiya S, Panghal D, Kumar S. Fused deposition modelling: a review. Rapid Prototyping J. 2020; 26(1): 176-201.

[48] Xu X, Goyanes A, Trenfield SJ, et al. Stereolithography (SLA) 3D printing of a bladder device for intravesical drug delivery. Mater Sci Eng C. 2021; 120: 111773.

[49] Weems AC, Arno MC, Yu W, Huckstepp RTR, Dove AP. 4D polycarbonates via stereolithography as scaffolds for soft tissue repair. Nat Commun. 2021; 12(1): 3771.

[50] Xing J-F, Zheng M-L, Duan X-M. Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery. Chem Soc Rev. 2015; 44(15): 5031-5039.

[51] Geng Q, Wang D, Chen P, Chen S-C. Ultrafast multi-focus 3-D nano-fabrication based on two-photon polymerization. Nat Commun. 2019; 10(1): 2179.

[52] Jiang LJ, Campbell JH, Lu YF, Bernat T, Petta N. Direct writing target structures by two-photon polymerization. Fusion Sci Technol. 2016; 70(2): 295-309.

[53] Wang H, Zhang W, Ladika D, et al. Two-photon polymerization lithography for optics and photonics: fundamentals, materials, technologies, and applications. Adv Funct Mater. 2023; 33(39): 2214211.

[54] Liu K, Ding H, Li S, et al. 3D printing colloidal crystal microstructures via sacrificial-scaffold-mediated two-photon lithography. Nat Commun. 2022; 13(1): 4563.

[55] O’Halloran S, Pandit A, Heise A, Kellett A. Two-photon polymerization: fundamentals, materials, and chemical modification strategies. Adv Sci. 2023; 10(7): 2204072.

[56] Blyweert P, Nicolas V, Fierro V, Celzard A. 3D printing of carbon-based materials: a review. Carbon. 2021; 183: 449-485.

[57] Zhang LC, Attar H, Calin M, Eckert J. Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications. Mater Technol. 2016; 31(2): 66-76.

[58] Dimitriadis K, Agathopoulos S. Selective laser melting-sintering technology: from dental Co-Cr alloys to dental ceramic materials. Solid State Phenom. 2022; 339: 115-122.

[59] Sefene EM. State-of-the-art of selective laser melting process: a comprehensive review. J Manuf Syst. 2022; 63: 250-274.

[60] Zhou K, Dai K, Liu C, Shen C. Flexible conductive polymer composites for smart wearable strain sensors. SmartMat. 2020; 1(1): e1010.

[61] Li T, Qu M, Carlos C, et al. High-performance poly(vinylidene difluoride)/dopamine core/shell piezoelectric nanofiber and its application for biomedical sensors. Adv Mater. 2021; 33(3): 2006093.

[62] Ding Q, Wang H, Zhou Z, et al. Stretchable, self-healable, and breathable biomimetic iontronics with superior humidity-sensing performance for wireless respiration monitoring. SmartMat. 2023; 4(2): e1147.

[63] MacDonald E, Wicker R. Multiprocess 3D printing for increasing component functionality. Science. 2016; 353(6307): aaf2093.

[64] Yu C, Schimelman J, Wang P, et al. Photopolymerizable biomaterials and light-based 3D printing strategies for biomedical applications. Chem Rev. 2020; 120(19): 10695-10743.

[65] Dong Y, Min X, Kim WS. A 3-D-printed integrated PCB-based electrochemical sensor system. IEEE Sens J. 2018; 18(7): 2959-2966.

[66] Abdalla A, Hamzah HH, Keattch O, Covill D, Patel BA. Augmentation of conductive pathways in carbon black/PLA 3D-printed electrodes achieved through varying printing parameters. Electrochim Acta. 2020; 354: 136618.

[67] Loo AH, Chua CK, Pumera M. DNA biosensing with 3D printing technology. Analyst (Lond). 2017; 142(2): 279-283.

[68] Wei H, Han L, Yin R, et al. Micro-3D printed concanavalin a hydrogel based photonic devices for high-sensitivity glucose sensing. Sens Actuators B Chem. 2023; 386: 133707.

[69] Panula T, Koivisto T, Pänkäälä M, Niiranen T, Kantola I, Kaisti M. An instrument for measuring blood pressure and assessing cardiovascular health from the fingertip. Biosens Bioelectron. 2020; 167: 112483.

[70] Lee MY, Han B, Jenkins C, Xing L, Suh TS. A depth-sensing technique on 3D-printed compensator for total body irradiation patient measurement and treatment planning. Med Phys. 2016; 43(11): 6137-6144.

[71] Hazelaar C, van Eijnatten M, Dahele M, et al. Using 3D printing techniques to create an anthropomorphic thorax phantom for medical imaging purposes. Med Phys. 2018; 45(1): 92-100.

[72] Mitsouras D, Lee TC, Liacouras P, et al. Three-dimensional printing of MRI-visible phantoms and MR image-guided therapy simulation. Magn Reson Med. 2017; 77(2): 613-622.

[73] Xie J, You X, Huang Y, et al. 3D-printed integrative probeheads for magnetic resonance. Nat Commun. 2020; 11(1): 5793.

[74] Gear JI, Cummings C, Craig AJ, et al. Abdo-Man: a 3D-printed anthropomorphic phantom for validating quantitative SIRT. EJNMMI Phys. 2016; 3(1): 17.

[75] Sindi R, Wong YH, Yeong CH, Sun Z. Development of patient-specific 3D-printed breast phantom using silicone and peanut oils for magnetic resonance imaging. Quant Imaging Med Surg. 2020; 10(6): 1237-1248.

[76] Morais P, Tavares JMRS, Queirós S, Veloso F, D’hooge J, Vilaça JL. Development of a patient-specific atrial phantom model for planning and training of inter-atrial interventions. Med Phys. 2017; 44(11): 5638-5649.

[77] Chen Z, Qian X, Song X, et al. Three-dimensional printed piezoelectric array for improving acoustic field and spatial resolution in medical ultrasonic imaging. Micromachines. 2019; 10(3): 170.

[78] Brecht SV, Krieger YS, Stolzenburg JU, Lueth TC. A new concept for a single incision laparoscopic manipulator system integrating intraoperative laparoscopic ultrasound. In: IEEE ROBIO. 2016: 51-56.

[79] Gürcüoğlu O, Deniz Derman I, Altınsoy M, et al. A 3D-printed 3D actuator for miniaturized laser scanning probes. Sens Actuat A. 2021; 317: 112448.

[80] Khan AQ, Shafiq M, Li J, et al. Recent developments in artificial spider silk and functional gel fibers. SmartMat. 2023; 4(6): e1189.

[81] Ding Y, Chen J, Wu Q, et al. Artificial intelligence-assisted point-of-care testing system for ultrafast and quantitative detection of drug-resistant bacteria. SmartMat. 2024; 5(3): e1214.

[82] Kimmel DW, LeBlanc G, Meschievitz ME, Cliffel DE. Electrochemical sensors and biosensors. Anal Chem. 2012; 84(2): 685-707.

[83] Ali MA, Hu C, Jahan S, et al. Sensing of COVID-19 antibodies in seconds via aerosol jet nanoprinted reduced-graphene-oxide-coated 3D electrodes. Adv Mater. 2021; 33(7): 2006647.

[84] Zhu Z, Park HS, McAlpine MC. 3D printed deformable sensors. Sci Adv. 2020; 6(25): eaba5575.

[85] Stepniak K, Ursani A, Paul N, Naguib H. Novel 3D printing technology for CT phantom coronary arteries with high geometrical accuracy for biomedical imaging applications. Bioprinting. 2020; 18: e00074.

[86] Tang CK, Vaze A, Rusling JF. Automated 3D-printed unibody immunoarray for chemiluminescence detection of cancer biomarker proteins. Lab Chip. 2017; 17(3): 484-489.

[87] Ali MA, Hu C, Yuan B, et al. Breaking the barrier to biomolecule limit-of-detection via 3D printed multi-length-scale graphene-coated electrodes. Nat Commun. 2021; 12(1): 7077.

[88] Yang C, Cao Q, Puthongkham P, et al. 3D-printed carbon electrodes for neurotransmitter detection. Angew Chem Int Ed. 2018; 57(43): 14255-14259.

[89] Bihar E, Wustoni S, Pappa AM, Salama KN, Baran D, Inal S. A fully inkjet-printed disposable glucose sensor on paper. npj Flex Electronics. 2018; 2(1): 30.

[90] Ho EHZ, Ambrosi A, Pumera M. Additive manufacturing of electrochemical interfaces: simultaneous detection of biomarkers. Appl Mater Today. 2018; 12: 43-50.

[91] Blankman P, Hasan D, Bikker IG, Gommers D. Lung stress and strain calculations in mechanically ventilated patients in the intensive care unit. Acta Anaesthesiol Scand. 2016; 60(1): 69-78.

[92] Frerichs I, Amato MBP, van Kaam AH, et al. Chest electrical impedance tomography examination, data analysis, terminology, clinical use and recommendations: consensus statement of the TRanslational EIT development study group. Thorax. 2017; 72(1): 83-93.

[93] Alexopoulos N, McLean DS, Janik M, Arepalli CD, Stillman AE, Raggi P. Epicardial adipose tissue and coronary artery plaque characteristics. Atherosclerosis. 2010; 210(1): 150-154.

[94] Ruzsics B, Lee H, Zwerner PL, Gebregziabher M, Costello P, Schoepf UJ. Dual-energy CT of the heart for diagnosing coronary artery stenosis and myocardial ischemia-initial experience. Eur Radiol. 2008; 18(11): 2414-2424.

[95] Tirotta I, Dichiarante V, Pigliacelli C, et al. 19F magnetic resonance imaging (MRI): from design of materials to clinical applications. Chem Rev. 2015; 115(2): 1106-1129.

[96] Webb AG. Radiofrequency microcoils in magnetic resonance. Prog Nucl Magn Reson Spectrosc. 1997; 31(1): 1-42.

[97] Wu Y, Chee AJY, Golzar H, Yu ACH, Tang X. Embedded 3D printing of ultrasound-compatible arterial phantoms with biomimetic elasticity. Adv Funct Mater. 2022; 32(25): 2110153.

[98] Maresca D, Lakshmanan A, Abedi M, et al. Biomolecular ultrasound and sonogenetics. Annu Rev Chem Biomol Engineer. 2018; 9: 229-252.

[99] Shung KK. High frequency ultrasonic imaging. J Med Ultrasound. 2009; 17(1): 25-30.

[100] Jacquet JR, Ossant F, Levassort F, Gregoire JM. 3-D-printed phantom fabricated by photopolymer jetting technology for high-frequency ultrasound imaging. IEEE Trans Ultrason Eng. 2018; 65(6): 1048-1055.

[101] Strathman M, Liu Y, Keeler EG, et al. MEMS scanning micromirror for optical coherence tomography. Biomed Opt Express. 2015; 6(1): 211-224.

[102] Zong W, Wu R, Li M, et al. Fast high-resolution miniature two-photon microscopy for brain imaging in freely behaving mice. Nat Methods. 2017; 14(7): 713-719.

[103] Rawat S, Komatsu S, Markman A, Anand A, Javidi B. Compact and field-portable 3D printed shearing digital holographic microscope for automated cell identification. Appl Opt. 2017; 56(9): D127-D133.

[104] Kang W, Huang H, Cai M, et al. On-site cell concentration and viability detections using smartphone based field-portable cell counter. Anal Chim Acta. 2019; 1077: 216-224.

[105] Nguyen HQ, Nguyen VD, Van Nguyen H, Seo TS. Quantification of colorimetric isothermal amplification on the smartphone and its open-source app for point-of-care pathogen detection. Sci Rep. 2020; 10(1): 15123.

[106] Zhang M, Cui X, Li N. Smartphone-based mobile biosensors for the point-of-care testing of human metabolites. Mater Today Bio. 2022; 14: 100254.

[107] Sim I. Mobile devices and health. N Engl J Med. 2019; 381(10): 956-968.

[108] Chansi S, Chaudhary S, Mani A, Bharadwaj LM, Basu T. A mobile app integrated portable electrochemical sensor for rapid detection of organophosphate pesticides in vegetable extract. Mater Lett. 2022; 309: 131319.

[109] Jiang P, Ji Z, Liu D, Ma S, Wang X, Zhou F. Growing hydrogel organ mannequins with interconnected cavity structures. Adv Funct Mater. 2022; 32(13): 2108845.

[110] Damon A, Clifton W, Valero-Moreno F. Nottmeier E. Orientation planning in the fused deposition modeling 3D printing of anatomical spine models. Cureus. 2020; 12(2): e7081.

[111] Dankowski R, Baszko A, Sutherland M, et al. 3D heart model printing for preparation of percutaneous structural interventions: description of the technology and case report. Kardiol Pol. 2014; 72(6): 546-551.

[112] Kim SH, Yeon YK, Lee JM, et al. Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing. Nat Commun. 2018; 9(1): 1620.

[113] Diermann SH, Lu M, Dargusch M, Grøndahl L, Huang H. Akermanite reinforced PHBV scaffolds manufactured using selective laser sintering. J Biomed Mater Res Part B Appl Biomater. 2019; 107(8): 2596-2610.

[114] Vidal E, Torres D, Guillem-Marti J. et al. Titanium scaffolds by direct ink writing: fabrication and functionalization to guide osteoblast behavior. Metals. 2020; 10(9): 1156.

[115] Sathies T, Senthil P, Anoop MS. A review on advancements in applications of fused deposition modelling process. Rapid Prototyping J. 2020; 26(4): 669-687.

[116] Türker H, Aksoy B, Özsoy K. Fabrication of customized dental guide by stereolithography method and evaluation of dimensional accuracy with artificial neural networks. J Mech Behav Biomed Mater. 2022; 126: 105071.

[117] Li W, Wang M, Mille LS, et al. A smartphone-enabled portable digital light processing 3D printer. Adv Mater. 2021; 33(35): 2102153.

[118] Aufa AN, Hassan MZ, Ismail Z. Recent advances in Ti-6Al-4V additively manufactured by selective laser melting for biomedical implants: prospect development. J Alloys Compd. 2022; 896: 163072.

[119] Zafeiris K, Brasinika D, Karatza A, et al. Additive manufacturing of hydroxyapatite-chitosan-genipin composite scaffolds for bone tissue engineering applications. Mater Sci Eng C. 2021; 119: 111639.

[120] Alizadeh-Osgouei M, Li Y, Vahid A, Ataee A, Wen C. High strength porous PLA gyroid scaffolds manufactured via fused deposition modeling for tissue-engineering applications. Smart Mater Med. 2021; 2: 15-25.

[121] Brossier T, Volpi G, Vasquez-Villegas J. et al. Photoprintable gelatin-graft-poly (trimethylene carbonate) by stereolithography for tissue engineering applications. Biomacromolecules. 2021; 22(9): 3873-3883.

[122] Wang Y, Chen S, Liang H, Liu Y, Bai J, Wang M. Digital light processing (DLP) of nano biphasic calcium phosphate bioceramic for making bone tissue engineering scaffolds. Ceramics Int. 2022; 48(19): 27681-27692.

[123] Montufar EB, Tkachenko S, Casas-Luna M. et al. Benchmarking of additive manufacturing technologies for commercially-pure-titanium bone-tissue-engineering scaffolds: processing-microstructure-property relationship. Addit Manuf. 2020; 36: 101516.

[124] Abdella S, Afinjuomo F, Song Y, Upton R, Garg S. 3D printed bilayer mucoadhesive buccal film of estradiol: impact of design on film properties, release kinetics and predicted in vivo performance. Int J Pharm. 2022; 628: 122324.

[125] Dumpa N, Butreddy A, Wang H, Komanduri N, Bandari S, Repka MA. 3D printing in personalized drug delivery: an overview of hot-melt extrusion-based fused deposition modeling. Int J Pharm. 2021; 600: 120501.

[126] Wang Y, Sun L, Mei Z, et al. 3D printed biodegradable implants as an individualized drug delivery system for local chemotherapy of osteosarcoma. Mater Des. 2020; 186: 108336.

[127] Krkobabić M, Medarević D, Cvijić S, Grujić B, Ibrić S. Hydrophilic excipients in digital light processing (DLP) printing of sustained release tablets: impact on internal structure and drug dissolution rate. Int J Pharm. 2019; 572: 118790.

[128] Abdalla Y, Elbadawi M, Ji M, et al. Machine learning using multi-modal data predicts the production of selective laser sintered 3D printed drug products. Int J Pharm. 2023; 633: 122628.

[129] Cui H, Nowicki M, Fisher JP, Zhang LG. 3D bioprinting for organ regeneration. Adv Healthcare Mater. 2017; 6(1): 1601118.

[130] Jin Z, Li Y, Yu K, et al. 3D printing of physical organ models: recent developments and challenges. Adv Sci. 2021; 8(17): 2101394.

[131] Hu X, Zhong M, Lou Y, et al. Clinical application of individualized 3D-printed navigation template to children with cubitus varus deformity. J Orthop Surg. 2020; 15(1): 111.

[132] Aarthi @ Priyatharshini SS, Kirubha SPA. Development of patient specific 3D printed mandible implant. IOP Confer Ser Mater Sci Eng. 2020; 912(6): 062020.

[133] Borges RA, Choudhury D, Zou M. 3D printed PCU/UHMWPE polymeric blend for artificial knee meniscus. Tribol Int. 2018; 122: 1-7.

[134] Anderson J, Wealleans J, Ray J. Endodontic applications of 3D printing. Int Endontic J. 2018; 51(9): 1005-1018.

[135] Ahmadpour L, Leardini A, Fini R, Mascia D. Knowledge sharing in temporary teams: exploring the use of 3D printing in orthopaedic surgery. Technovation. 2023; 123: 102723.

[136] Nagassa RG, McMenamin PG, Adams JW, Quayle MR, Rosenfeld JV. Advanced 3D printed model of middle cerebral artery aneurysms for neurosurgery simulation. 3D Print Med. 2019; 5(1): 11.

[137] Marti P, Lampus F, Benevento D, Setacci C. Trends in use of 3D printing in vascular surgery: a survey. Int Angiol. 2019; 38(5): 418-424.

[138] Jovičić MŠ, Vuletić F, Ribičić T, Šimunić S, Petrović T, Kolundžić R. Implementation of the three-dimensional printing technology in treatment of bone tumours: a case series. Int Orthop. 2021; 45(4): 1079-1085.

[139] Solis DM, Czekanski A. 3D and 4D additive manufacturing techniques for vascular-like structures-a review. Bioprinting. 2022; 25: e00182.

[140] Sheela UB, Usha PG, Joseph MM, Melo JS, Nair STT, Tripathi A. 3D printing in dental implants. In: 3D Printing in Medicine and Surgery. Elsevier; 2021: 83-104.

[141] Nandi SK, Fielding G, Banerjee D, Bandyopadhyay A, Bose S. 3D-printed β-TCP bone tissue engineering scaffolds: effects of chemistry on in vivo biological properties in a rabbit tibia model. J Mater Res. 2018; 33(14): 1939-1947.

[142] Hou G, Liu B, Tian Y, et al. An innovative strategy to treat large metaphyseal segmental femoral bone defect using customized design and 3D printed micro-porous prosthesis: a prospective clinical study. J Mater Sci Mater Med. 2020; 31(8): 66.

[143] Kang J, Zhang J, Zheng J, Wang L, Li D, Liu S. 3D-printed PEEK implant for mandibular defects repair-a new method. J Mech Behav Biomed Mater. 2021; 116: 104335.

[144] Zhang Q, Xu Z, Zhang X, et al. 3D printed high-strength supramolecular polymer hydrogel-cushioned radially and circumferentially oriented meniscus substitute. Adv Funct Mater. 2022; 32(23): 2200360.

[145] Yang J, Dang H, Xu Y. Recent advancement of decellularization extracellular matrix for tissue engineering and biomedical application. Artif Organs. 2022; 46(4): 549-567.

[146] Radenkovic D, Solouk A, Seifalian A. Personalized development of human organs using 3D printing technology. Med Hypotheses. 2016; 87: 30-33.

[147] Yadid M, Oved H, Silberman E, Dvir T. Bioengineering approaches to treat the failing heart: from cell biology to 3D printing. Nat Rev Cardiol. 2022; 19(2): 83-99.

[148] Shinkar K, Rhode K. Could 3D extrusion bioprinting serve to be a real alternative to organ transplantation in the future? Ann 3D Print Med. 2022; 7: 100066.

[149] Lee VK, Kim DY, Ngo H, et al. Creating perfused functional vascular channels using 3D bio-printing technology. Biomaterials. 2014; 35(28): 8092-8102.

[150] O’brien FJ. Biomaterials & scaffolds for tissue engineering. Mater Today. 2011; 14(3): 88-95.

[151] Gao J, Ding X, Yu X, et al. Cell-free bilayered porous scaffolds for osteochondral regeneration fabricated by continuous 3D-printing using nascent physical hydrogel as ink. Adv Healthcare Mater. 2021; 10(3): 2001404.

[152] Zhou X, Tenaglio S, Esworthy T, et al. Three-dimensional printing biologically inspired DNA-based gradient scaffolds for cartilage tissue regeneration. ACS Appl Mater Interfaces. 2020; 12(29): 33219-33228.

[153] Su X, Wang T, Guo S. Applications of 3D printed bone tissue engineering scaffolds in the stem cell field. Regener Ther. 2021; 16: 63-72.

[154] Zhang Z, Feng Y, Wang L, Liu D, Qin C, Shi Y. A review of preparation methods of porous skin tissue engineering scaffolds. Mater Today Commun. 2022; 32: 104109.

[155] Li L, Li J, Guo J, et al. 3D molecularly functionalized cell-free biomimetic scaffolds for osteochondral regeneration. Adv Funct Mater. 2019; 29(6): 1807356.

[156] Ibanez RIR, do Amaral RJFC, Simpson CR, et al. 3D printed scaffolds incorporated with platelet-rich plasma show enhanced angiogenic potential while not inducing fibrosis. Adv Funct Mater. 2022; 32(10): 2109915.

[157] van der Kooy D, Weiss S. Why stem cells? Science. 2000; 287(5457): 1439-1441.

[158] Reya T, Morrison SJ, Clarke MF, Weissman IL. Stem cells, cancer, and cancer stem cells. Nature. 2001; 414(6859): 105-111.

[159] Jordan CT, Guzman ML, Noble M. Cancer stem cells. N Engl J Med. 2006; 355(12): 1253-1261.

[160] Ong CS, Yesantharao P, Huang CY, et al. 3D bioprinting using stem cells. Pediatr Res. 2018; 83(1): 223-231.

[161] Joung D, Truong V, Neitzke CC, et al. 3D printed stem-cell derived neural progenitors generate spinal cord scaffolds. Adv Funct Mater. 2018; 28(39): 1801850.

[162] Richey RH, Hughes C, Craig JV, et al. A systematic review of the use of dosage form manipulation to obtain required doses to inform use of manipulation in paediatric practice. Int J Pharm. 2017; 518(1-2): 155-166.

[163] Khaled SA, Burley JC, Alexander MR, Yang J, Roberts CJ. 3D printing of tablets containing multiple drugs with defined release profiles. Int J Pharm. 2015; 494(2): 643-650.

[164] Sandler N, Preis M. Printed drug-delivery systems for improved patient treatment. Trends Pharmacol Sci. 2016; 37(12): 1070-1080.

[165] El-Tholoth M, Bai H, Mauk MG, Saif L, Bau HH. A portable, 3D printed, microfluidic device for multiplexed, real time, molecular detection of the porcine epidemic diarrhea virus, transmissible gastroenteritis virus, and porcine deltacoronavirus at the point of need. Lab Chip. 2021; 21(6): 1118-1130.

[166] Thatcher GP, Soukup JW. Virtual surgical planning and 3D printing in veterinary dentistry and oromaxillofacial surgery. Vet Clin North America Small Anim Pract. 2022; 52(1): 221-234.

[167] Memarian P, Pishavar E, Zanotti F, et al. Active materials for 3D printing in small animals: current modalities and future directions for orthopedic applications. Int J Mol Sci. 2022; 23(3): 1045.

[168] Kim SE, Shim KM, Jang K, Shim JH, Kang SS. Three-dimensional printing-based reconstruction of a maxillary bone defect in a dog following tumor removal. In Vivo. 2018; 32(1): 63-70.

[169] Xie S, Cai B, Rasidi E, et al. The use of a 3D-printed prosthesis in a Great Hornbill (Buceros bicornis) with squamous cell carcinoma of the casque. PLoS One. 2019; 14(8): e0220922.

[170] Altwal J, Wilson CH, Griffon DJ. Applications of 3-dimensional printing in small-animal surgery: a review of current practices. Vet Surg. 2022; 51(1): 34-51.

[171] Harrysson OLA, Marcellin-Little DJ. Horn TJ. Applications of metal additive manufacturing in veterinary orthopedic surgery. JOM. 2015; 67(3): 647-654.

[172] Del Rosario M, Heil HS, Mendes A, Saggiomo V, Henriques R. The field guide to 3D printing in optical microscopy for life sciences. Adv Biol. 2022; 6(4): 2100994.

[173] Popescu D, Zapciu A, Amza C, Baciu F, Marinescu R. FDM process parameters influence over the mechanical properties of polymer specimens: a review. Polym Test. 2018; 69: 157-166.

[174] Birosz MT, Ledenyák D, Andó M. Effect of FDM infill patterns on mechanical properties. Polym Test. 2022; 113: 107654.

[175] Le Duigou A, Castro M, Bevan R, Martin N. 3D printing of wood fibre biocomposites: from mechanical to actuation functionality. Mater Des. 2016; 96: 106-114.

[176] Arslan A, Steiger W, Roose P, et al. Polymer architecture as key to unprecedented high-resolution 3D-printing performance: the case of biodegradable hexa-functional telechelic urethane-based poly-ϵ-caprolactone. Mater Today. 2021; 44: 25-39.

[177] Turnbull G, Clarke J, Picard F, et al. 3D bioactive composite scaffolds for bone tissue engineering. Bioact Mater. 2018; 3(3): 278-314.

[178] Varaprasad K, Karthikeyan C, Yallapu MM, Sadiku R. The significance of biomacromolecule alginate for the 3D printing of hydrogels for biomedical applications. Int J Biiol Macromol. 2022; 212: 561-578.

[179] Rejeski D, Zhao F, Huang Y. Research needs and recommendations on environmental implications of additive manufacturing. Addit Manuf. 2018; 19: 21-28.

[180] Han C, Fang Q, Shi Y, Tor SB, Chua CK, Zhou K. Recent advances on high-entropy alloys for 3D printing. Adv Mater. 2020; 32(26): 1903855.

[181] Huang R, Riddle M, Graziano D, et al. Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components. J Clean Prod. 2016; 135: 1559-1570.

[182] Wu P, Wang J, Wang X. A critical review of the use of 3-D printing in the construction industry. Autom Construct. 2016; 68: 21-31.

[183] Peng T, Kellens K, Tang R, Chen C, Chen G. Sustainability of additive manufacturing: an overview on its energy demand and environmental impact. Addit Manuf. 2018; 21: 694-704.

[184] Khosravani MR, Reinicke T. On the environmental impacts of 3D printing technology. Appl Mater Today. 2020; 20: 100689.

[185] Mikula K, Skrzypczak D, Izydorczyk G, et al. 3D printing filament as a second life of waste plastics-a review. Environ Sci Pollut Res. 2021; 28(10): 12321-12333.

RIGHTS & PERMISSIONS

2023 The Authors. SmartMat published by Tianjin University and John Wiley & Sons Australia, Ltd.