Polyurethane grouting materials with different compositions for the treatment of mud pumping in ballastless track subgrade beds: properties and application effect

Abstract

Mud pumping in subgrade beds under ballastless tracks will deteriorate the dynamic performance of infrastructure under railway lines, reduce the smoothness of the railway lines, and seriously affect the comfort and safety of the trains. Due to their good mechanical properties, two-component polyurethane materials can be used for grouting to treat the fouling problems caused by ballastless track mud pumping. To develop a polyurethane formula suitable for the treatment of ballastless track mud pumping, we first performed indoor experiments to investigate the mechanical properties and gelation time of polyurethane elastomers synthesized with different raw material composition ratios, to determine an optimal composition ratio of the raw materials. Then, we conducted a dynamic field test to verify the remediation effect of the polyurethane material fabricated according to the design ratio. The results showed that polyurethane grouting material with the selected design ratios improved the contact characteristics between the surface layer of the subgrade bed and the base plate in the area, coordinating the dynamic response between the track structure and the subgrade bed. Thus, the obtained polyurethane grouting material could be used to renovate mud pumping areas of ballastless tracks with a good treatment effect.

References

[1] Phong PD (2015) Study on the mud pumping mechanism and reinforcement effect for graded gravel in high-speed railway ballastless track surface layer of subgrade bed. Dissertation, Southwest Jiaotong University, Chengdu (in Chinese)

[2] Liu MS, Luo Q, Guo JH . Mechanism of frost boiling and optimization of drainage design in ballastless track subgrade bed. J Beijing Jiaotong Univ 2019, 43 3 16-25(in Chinese)

[3] Zhang WC, Su Q, Liu T . Research on vibration characteristics of ballastless track subgrade under frost boiling at subgrade bed. Rock Soil Mech 2014, 35 12 3556-3562(in Chinese)

[4] Yang F, Wang T, Yang JF . Research on Influence of mud-pumping and renovation of slab ballastless track subgrade on track irregularity. Railw Eng 2016, 11 129-132(in Chinese)

[5] Karol RH. Chemical grouting and soil stabilization, revised and expanded 2007 3 Boca Raton CRC Press

[6] Li LP, Li SC, Zhang QS . Experimental study of a new polymer grouting material. Chin J Rock Mech Eng 2010, 29 3150-3156

[7] Qian X, Xiao F. Applications of epoxy materials in pavement engineering. Constr Build Mater 2020, 235 117529

[8] Jiang H, Zhong R, Peng Z. Study on preparation of chemical grouting and its hydraulic properties and application for water seepage safety. J Coast Res 2019, 94 sp1 291-295

[9] Kazemian S, Huat BBK, Arun P . A review of stabilization of soft soils by injection of chemical grouting. Aust J Basic Appl Sci 2010, 4 12 5862-5868

[10] Yang Z, Cheng X. A performance study of high-strength microbial mortar produced by low pressure grouting for the reinforcement of deteriorated masonry structures. Constr Build Mater 2013, 41 505-515

[11] Fangtian W, Cun Z, Shuaifeng W . Whole section anchor–grouting reinforcement technology and its application in underground roadways with loose and fractured surrounding rock. Tunn Undergr Space Technol 2016, 51 133-143

[12] Zhang DL, Sun F, Li PF. Mechanism of composite grouting in subsea tunnel and its application. Chin J Rock Mech Eng 2012, 31 3 445-452(in Chinese)

[13] Mishra D, Boler H, Tutumluer E et al (2016) Effectiveness of chemical grouting and stone blowing as remedial measures to mitigate differential movement at railroad track transitions. In: ASME/IEEE joint rail conference, vol. 49675. Columbia, April 12–15, 2016

[14] Einsalo K (2019) Post-grouting in aggressive environment: case ring rail line. In: ISRM 9th Nordic grouting symposium. Helsinki

[15] Huang JJ, Su Q, Cheng YM . Improved performance of the subgrade bed under the slab track of high-speed railway using polyurethane adhesive. Constr Build Mater 2019, 208 710-722

[16] Akindoyo JO, Beg MDH, Ghazali S . Polyurethane types, synthesis and applications—a review. RSC Adv 2016, 6 114453-114482

[17] Krol P. Synthesis methods, chemical structures and phase structures of linear polyurethanes. Properties and applications of linear polyurethanes in polyurethane elastomers, copolymers and ionomers. Prog Mater Sci 2007, 52 6 915-1015

[18] Nguyen TT, Indraratna B, Kelly R, Phan NM, Haryono F. Mud pumping under railtracks: mechanisms, assessments and solutions. Aust Geomech J 2019, 54 59-80

[19] Gundavaram D, Hussaini SKK (2019) Polyurethane-based stabilization of railroad ballast—a critical review. Int J Rail Transp 7(3):219–240

[20] Li H, Yi S, Zheng X . Performance and application of ballast adhesive for high-speed railway. Polyurethane Ind 2013, 28 1 26-28

[21] Hussain N, Bonnia NN, Hirzin R . Effect of NCO/OH ratio on physical and mechanical properties of castor-based polyurethane grouting materials. J Phys Conf Ser 2019, 1349 012113

[22] Yang Z, Zhang X, Liu X . Flexible and stretchable polyurethane/waterglass grouting material. Constr Build Mater 2017, 138 240-246

[23] Yang S, Xu X, Zhou X . Preparation of polyurethane grouting and reinforcement materials. Appl Chem Ind 2011, 40 2 295-298, 302(in Chinese)

[24] Zheng XG. Expansion characteristics of polymer grouting material cured under pressure and mechanical properties of its consolidated body. China Railw Sci 2017, 38 1 9-15(in Chinese)

[25] Gao X, Wei Y, Wang F . Fatigue resistant and microstructure evolution of polyurethane grout materials under uniaxial compression. Acta Mater Compos Sin 2017, 34 3 550-556(in Chinese)

[26] Wei Y, Wang F, Gao X . Microstructure and fatigue performance of polyurethane grout materials under compression. J Mater Civ Eng 2017, 29 9 04017101

[27] Liu K, Li Y, Wang F . Analytical and model studies on behavior of rigid polyurethane composite aggregate under compression. J Mater Civ Eng 2019, 31 3 04019007

[28] Liu K, Liang W, Ren F . The study on compressive mechanical properties of rigid polyurethane grout materials with different densities. Constr Build Mater 2019, 206 270-278

[29] Xiang J, Liu L, Cui X . Effect of fuller-fine sand on rheological, drying shrinkage, and microstructural properties of metakaolin-based geopolymer grouting materials. Cement Concr Compos 2019, 104 103381

[30] Khotbehsara MM, Manalo A, Aravinthan T . Effect of elevated in-service temperature on the mechanical properties and microstructure of particulate-filled epoxy polymers. Polym Degrad Stab 2019, 170 108994

[31] Wang J, Li X, Fang H . Statistical characteristics of polymer grouting material microstructure. Adv Civ Eng 2020

[32] Saleh S, Yunus NZM, Ahmad K . Micro-level analysis of marine clay stabilised with polyurethane. KSCE J Civ Eng 2020, 24 3 807-815

[33] Anagnostopoulos CA. Laboratory study of an injected granular soil with polymer grouts. Tunn Undergr Space Technol 2005, 20 6 525-533

[34] Fang H, Li B, Wang F . The mechanical behaviour of drainage pipeline under traffic load before and after polymer grouting trenchless repairing. Tunn Undergr Space Technol 2018, 74 185-194

[35] Hao M, Wang F, Li X . Numerical and experimental studies of diffusion law of grouting with expansible polymer. J Mater Civ Eng 2018, 30 2 04017290

[36] Guo C, Sun B, Hu D . A field experimental study on the diffusion behavior of expanding polymer grouting material in soil. Soil Mech Found Eng 2019, 56 3 171-177

[37] Wang D, Sui W. Grout diffusion characteristics during chemical grouting in a deep water-bearing sand layer. Int J Min Sci Technol 2012, 22 4 589-593

[38] Festel G. Synthesis and properties of segmented polyurethane elastomers with molecularly uniform hard segments based on 1,5-naphthalene diisocyanate and 1,4-butanediol. Chin Polym Bullet 2004, 6 42-62

[39] Fu HJ, Yu CK, Luo JX . Effect of chain extender and crosslinking agent on the properties of polyurethane elastomer based on NDI. China Plastics 2012, 10 31-35(in Chinese)

[40] Li D (2019) Development and application of polyurethane for repairing mud pumping of subgrade of ballastless track. Dissertation, Southwest Jiaotong University, Chengdu (in Chinese)

[41] Liu CJ (2016) Research on new materials and construction technology of railway subgrade mud pumping. Dissertation, Southwest Jiaotong University, Chengdu (in Chinese)

[42] National Development and Reform Commission. JC/T 1041–2007: epoxy grouting resin for concrete crack 2008 Beijing Chinese Building Materials Press(in Chinese)

[43] State Administration for Market Regulation, Standardization Administration (2009) JB/T 2567-2008: Test methods for properties of resin casting body. Standards Press of China, Beijing (in Chinese)

[44] State Administration for Market Regulation, Standardization Administration (2009) GB/T 7193-2008: Test methods for unsaturated polyester resins. Standards Press of China, Beijing (in Chinese)

[45] Zhong CM, Zhu H, Yu C . Preparation and characterization of high performance polymer polyols. Polym Bull 2014, 12 149-156

[46] Tatai L, Moore TG, Adhikari R . Thermoplastic biodegradable polyurethanes: the effect of chain extender structure on properties and in-vitro degradation. Biomaterials 2007, 28 36 5407-5417

[47] China State Railway Group Co., Ltd. Chinese high-speed railway ballastless track line maintenance rules (trial) 2012 Ltd, Beijing China Railway Publishing House Co.(in Chinese)

Funding

National Natural Science Foundation of China(51978588)