Wellbore stability analysis of layered shale based on the modified Mogi-Coulomb criterion

Abstract

Borehole instability was frequently encountered during shale gas drilling. Most conventional models are not applicable to layered formation's wellbore stability analysis on account of anisotropic strength characteristic. In this study, an empirical equation for predicting anisotropic strength was implemented in the Mogi-Coulomb criterion to describe variations of cohesive strength and friction angle of shale formations. A collapse pressure model and its appropriate solution method for layered shale formations were proposed. The impact of different strength criteria and rock anisotropy type on rock strength and collapse pressure was investigated. The analysis indicated that the predicted strength of our modified criterion was usually higher than the weak plane failure criteria. The collapse pressure calculated by the modified Mogi-Coulomb criterion was lower than the weak-plane failure criteria. Furthermore, it was more consistent with real mud weight. Additionally, the anisotropy type of rock notably influences wellbore stability. More significant anisotropy coefficients correspond to higher strengths, which results in smaller collapse pressure values. Improper anisotropy coefficients can over-or under-predict the collapse pressure. Reasonable estimates of collapse pressure of anisotropic rocks can be made through the modified Mogi-Coulomb criterion using limited experimental data and the anisotropy rock type.

Keywords

Shale / Wellbore stability / Collapse pressure / Anisotropy

Acknowledgements

This work was financially supported by the National Natural Science Foundation of China (No. 51774248) and Sichuan Province in China Key Science and Technology Foundation (No. 2019YFH0166).

References

[1] Chuanliang Yan, Jingen Deng, Baohua Yu, et al., Research on collapsing pressure of gas shale, Chin. J. Rock Mech. Eng. 32 (8) (2013) 1595-1602.

[2] Tianshou Ma, Ping Chen, Qianbing Zhang, A novel collapse pressure model with chemical-mechanical coupling in shale gas formations with multi-weakness planes, J. Nat. Gas Sci. Eng. 36 (B) (2016) 1151-1177.

[3] Xiangchao Shi, Wuqiang Cai, Yingfeng Meng, et al., Wellbore stability analysis based on a new strength criterion, J. Nat. Gas Sci. Eng. 27 (2015) 1005-1015.

[4] A.K. Manshad, H. Jalalifar, M. Aslannejad, Analysis of vertical, horizontal and deviated wellbores stability by analytical and numerical methods, J. Pet. Explor. Prod. Technol. 4 (4) (2014) 359-369.

[5] Kai Lan, Mingguo Liu, Wenxue Chao, Determination of collapse pressure for deviated wellbore in transversely isotropic water-sensitive formation, J. Jilin Univ. (Earth Sci. Ed.) 45 (1) (2015) 198-206.

[6] Xibing Li, Kun Du, Diyuan Li, True triaxial strength and failure modes of cubic rock specimens with unloading the minor principal stress, Rock Mech. Rock Eng. 48 (6) (2015) 2185-2196.

[7] A.M. Alajmi, R.W. Zimmerman,The Mogi-Coulomb true-triaxial failure criterion and some implications for rock engineering, 11th ISRM Congress. Portugal, 2007 Lisbon.

[8] A. Mehrabian, A.D. Pérez, C. Santana, Wellbore-stability analysis considering the weak bedding planes effect: a case study, SPE Drill. Complet. 22 (04) (2018) 377-384.

[9] D. Katsuki, A. Tutuncu,Effects of stress and intrinsic anisotropy on the development of shear fractures in shale formations, 48th U.S. Rock Mechanics/Geomechanics Symposium, USA, 2014 Minneapolis, Minnesota.

[10] Y.K. Lee, B.H. Chol, Anisotropic version of Mohr-Coulomb failure criterion for transversely isotropic rock, Tunn. Undergr. Space 21 (3) (2011) 174-180.

[11] Xiangchao Shi, Xu Yang, Yingfeng Meng, Modified Hoek-Brown failure criterion for anisotropic rocks, Environ. Earth Sci. 75 (11) (2016) 1-11.

[12] J.C. Jaeger, Shear failure of anistropic rocks, Geol. Mag. 97 (1) (1960) 65-72.

[13] R. Mclamore, K.E. Gray, The mechanical behavior of anisotropic sedimentary rocks, J. Eng. Ind. 89 (1) (1967) 62-73.

[14] E. Hoek, E.T. Brown, Underground Excavations in Rock, Institution of mining metallurgy, London, 1980.

[15] Hang Wen, Mian Chen, Yan Jin, et al., A chemo-mechanical coupling model of deviated borehole stability in hard brittle shale, Pet. Explor. Dev. 41 (6) (2014) 748-754.

[16] Junliang Yuan, Jingen Deng, Qiang Tan, et al., Borehole stability analysis of horizontal drilling in shale gas reservoirs, Rock Mech. Rock Eng. 46 (2013) 1157-1164.

[17] Chunsheng Qiao, Zhigang Zhang, Li Xiao, Anisotropic strength characteristics of jointed rock mass, ISRM-SINOROCK, China, Hong Kong, 2009.

[18] S.C. Bandis, N. Barton, Failure modes of deep boreholes, 27th U.S. USRMS. USA, Tuscaloosa, Alabama, 1986.

[19] Lianyang Zhang, Ping Cao, K.C. Radha, Evaluation of rock strength criteria for wellbore stability analysis, Int. J. Rock Mech. Min. Sci. 47 (8) (2010) 1304-1316.

[20] Xu Yang, Boyun Guo, Xiaohui Zhang, An analytical model for capturing the decline of fracture conductivity in the Tuscaloosa Marine Shale Trend from production data, Energies 12 (10) (2019) 1938.

[21] Changgui Jia, Junhai Chen, Yintong Guo, et al., Research on mechanical behaviors and failure modes of layer shale, Rock Soil Mech. 34 (S2) (2013) 57-61.

[22] G. Ranalli, Z.M. Yin, Critical stress difference and orientation of faults in rocks with strength anisotropies: the two-dimensional case, J. Struct. Geol. 12 (8) (2012) 1067-1071.

[23] F.D.E. Cuisiat, J.A. Hudson, The influence of rock anisotropy on borehole breakouts: a microstatistical approach, Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 30 (7) (1993) 1077-1083.

[24] Zhigang Wang, Practice and cognition of shale gas horizontal well fracturing stimulation in Jiaoshiba of Fuling area, Oil Gas Geol. 35 (3) (2014) 425-430.