Advances in high-throughput experiments of polymer crystallization for developing polymer processing

Abstract

Polymer crystallization, an everlasting subject in polymeric materials, holds great significance not only as a fundamental theoretical issue but also as a pivotal basis for directing polymer processing. Given its multistep, rapid, and thermodynamic nature, tracing and comprehending polymer crystallization pose a formidable challenge, particularly when it encounters practical processing scenarios that involve complex coupled fields (such as temperature, flow, and pressure). The advent of high-time and spatially resolved experiments paves the way for in situ investigations of polymer crystallization. In this review, we delve into the strides in studying polymer crystallization under the effects of coupled external fields via state-of-the-art high-throughput experiments. We highlight the intricate setup of these high-throughput experimental devices, spanning from the laboratory and pilot levels to the industrial level. The individual and combined effects of external fields on polymer crystallization are discussed. By breaking away from the conventional “black box” research approach, special interest is paid to the in situ crystalline behavior of polymers during realistic processing. Finally, we underscore the advancements in polymer crystallization via high-throughput experiments and outline its promising development.

Keywords

high-throughput experiment / polymer crystallization / polymer processing / synchrotron radiation

References

[1] Xie J. Prospects of materials genome engineering frontiers. Materials Genome Engineering Advances. 2023; 1(2): e17.

[2] Xie J, Su Y, Zhang D, Feng Q. A vision of materials genome engineering in China. Engineering. 2022; 10: 10-12.

[3] Chen Z, Lu D, Cao J, et al. Development of high-throughput wet-chemical synthesis techniques for material research. Materials Genome Engineering Advances. 2023; 1:e5.

[4] Xu D, Zhang Q, Huo X, Wang Y, Yang M. Advances in data-assisted high-throughput computations for material design. Materials Genome Engineering Advances. 2023; 1: e11.

[5] Liu L, Yao M, Wang Y, et al. The MatHub-3d first-principles repository and the applications on thermoelectrics. Materials Genome Engineering Advances. 2024; 2(1): e21.

[6] Shang Y, Xiong Z, An K, Hauch JA, Brabec CJ. Materials genome engineering accelerates the research and development of organic and perovskite photovoltaics. Materials Genome Engineering Advances. 2024; 2(1): e28.

[7] Liu C, Lüer L, Corre VML, et al. Understanding causalities in organic photovoltaics device degradation in a machine-learning-driven high-throughput platform. Adv Mater. 2024; 36(20):2300259.

[8] Ramakrishnan R, Dral PO, Rupp M, von Lilienfeld OA. Quantum chemistry structures and properties of 134 kilo molecules. Sci Data. 2014; 1:140022.

[9] Ma R, Zhang H, Xu J, et al. Machine learning-assisted exploration of thermally conductive polymers based on high-throughput molecular dynamics simulations. Materials Today Physics. 2022; 28:100850.

[10] Chen L, Pilania G, Batra R, et al. Polymer informatics: current status and critical next steps. Mater Sci Eng R Rep. 2021; 144:100595.

[11] Lu S, Jayaraman A. Machine learning for analyses and automation of structural characterization of polymer materials. Prog Polym Sci. 2024; 153:101828.

[12] Tao L, He J, Munyaneza NE, et al. Discovery of multi-functional polyimides through high-throughput screening using explainable machine learning. Chem Eng J. 2023; 465:142949.

[13] Yue D, Feng Y, Liu XX, et al. Prediction of energy storage performance in polymer composites using high-throughput stochastic breakdown simulation and machine learning. Adv Sci. 2022; 9(17):2105773.

[14] Judzewitsch PR, Corrigan N, Trujillo F, et al. High-throughput process for the discovery of antimicrobial polymers and their upscaled production via flow polymerization. Macromolecules. 2020; 53(2): 631-639.

[15] Shen L, Zhou J, Yang T, Yang M, Feng YP. High-throughput computational discovery and intelligent design of two-dimensional functional materials for various applications. Accounts Mater Res. 2022; 3(6): 572-583.

[16] Gormley AJ, Webb MA. Machine learning in combinatorial polymer chemistry. Nat Rev Mater. 2021; 6(8): 642-644.

[17] Lu XG, He Y, Zheng W. Design of advanced steels by integrated computational materials engineering. Materials Genome Engineering Advances. 2024; 2: e36.

[18] Gou W, Shi ZZ, Zhu Y, et al. Multi-objective optimization of three mechanical properties of Mg alloys through machine learning. Materials Genome Engineering Advances. 2024; 2(3): e54.

[19] Yuan WL, He L, Tao GH, Shreeve JnM. Materials-genome approach to energetic materials. Accounts Mater Res. 2021; 2(9): 692-696.

[20] Liu M, Lei C, Wang Y, Zhang B, Qu X. High-throughput preparation for alloy composition design in additive manufacturing: a comprehensive review. Materials Genome Engineering Advances. 2024; 2(3):e55.

[21] Hu Q, Zhu L, Zhuang G, Wang H, Ren Y, Hui J. High-throughput study of X-ray-induced synthesis of flower-like CuxO. Materials Genome Engineering Advances. 2024; 2(3): e59.

[22] Wang WY, Zhang S, Li G, et al. Artificial intelligence enabled smart design and manufacturing of advanced materials: the endless Frontier in AI+ era. Materials Genome Engineering Advances. 2024; 2(3): e56.

[23] Ge J, Catalanotti G, Falzon BG, et al. Process characteristics, damage mechanisms and challenges in machining of fibre reinforced thermoplastic polymer (FRTP) composites: a review. Compos B Eng. 2024; 273:111247.

[24] Bifulco A, Chen J, Sekar A, Klingler WW, Gooneie A, Gaan S. Recycling of flame retardant polymers: Current technologies and future perspectives. J Mater Sci Technol. 2024; 199: 156-183.

[25] Stuart MAC, Huck WT, Genzer J, et al. Emerging applications of stimuli-responsive polymer materials. Nat Mater. 2010; 9(2): 101-113.

[26] Huang HD, Ren PG, Zhong GJ, et al. Promising strategies and new opportunities for high barrier polymer packaging films. Prog Polym Sci. 2023; 144:101722.

[27] Dong Y, Yu H, Feng Y, Feng W. Structure, properties and applications of multi-functional thermally conductive polymer composites. J Mater Sci Technol. 2024; 200: 141-161.

[28] Ling S, Wu Z, Mei J, Lv S. An efficient machine learning-based model for predicting the stress-strain relationships of thermoplastic polymers with limited testing data. Compos B Eng. 2024; 283:111600.

[29] Legras R, Mercier J, Nield E. Polymer crystallization by chemical nucleation. Nature. 1983; 304(5925): 432-434.

[30] Kato S, Furukawa S, Aoki D, et al. Crystallization-induced mechanofluorescence for visualization of polymer crystallization. Nat Commun. 2021; 12(1): 126.

[31] Liu YX, Chen EQ. Polymer crystallization of ultrathin films on solid substrates. Coord Chem Rev. 2010; 254(9-10): 1011-1037

[32] Li H, Mu Y, Wang Q, et al. Interlayer enhancement of 3D printed CF/PLA composites via localized microwave welding and annealing-induced crystallization. Compos B Eng. 2024; 284:111737.

[33] Zhong GJ, Yang SG, Lei J, Li ZM. Flow-induced polymer crystallization under pressure and its engineering application in “structuring” polymer processing. Macromolecules. 2024; 57(3): 789-809.

[34] Yang Y, Tian H, Napolitano S, Zuo B. Crystallization in thin films of polymer glasses: The role of free surfaces, solid interfaces and their competition. Prog Polym Sci. 2023; 144:101725.

[35] Ono T, Samitsu S, Hazutani M, Ata S. Structural characterization of hierarchical polymer foams by combining X-ray micro-computed tomography and scanning electron microscopy. Polym Test. 2024; 140:108580.

[36] Pandey A, Dalal S, Dutta S, Dixit A. Structural characterization of polycrystalline thin films by X-ray diffraction techniques. J Mater Sci Mater Electron. 2021; 32(2): 1341-1368.

[37] Fernandez E, Ceretti DA, Wang S, et al. Fused filament fabrication of copolyesters by understanding the balance of inter- and intra-layer welding. Plastics, Rubber Compos. 2022; 51(3): 126-132.

[38] Drzeżdżon J, Jacewicz D, Sielicka A, Chmurzyński L. Characterization of polymers based on differential scanning calorimetry based techniques. TrAC Trends Anal Chem. 2019; 110: 51-56.

[39] Danielsen SP, Beech HK, Wang S, et al. Molecular characterization of polymer networks. Chem Rev. 2021; 121(8): 5042-5092.

[40] Gokmen MT, Du Prez FE. Porous polymer particles—a comprehensive guide to synthesis, characterization, functionalization and applications. Prog Polym Sci. 2012; 37(3): 365-405.

[41] Zhou J, Chen Y, Ma Y, et al. Statistical in situ scanning electron microscopy investigation on the failure of oxide scales. Materials Genome Engineering Advances. 2023; 1: e12.

[42] Smith A, Alcock S, Davidson L, et al. I22: SAXS/WAXS beamline at Diamond Light Source-an overview of 10 years operation. J Synchrotron Radiat. 2021; 28(3): 939-947.

[43] Liu Y, Su X, Ding J, et al. Progress and challenges in structural, in situ and operando characterization of single-atom catalysts by X-ray based synchrotron radiation techniques. Chem Soc Rev. 2024; 53(24): 11850-11887.

[44] Huang X, Safranek J, Zholents A. Obtaining picosecond x-ray pulses from fourth generation synchrotron light sources. Physical Review Accelerators and Beams. 2023; 26(12):120701.

[45] Kunz C. Synchrotron radiation: third generation sources. J Phys Condens Matter. 2001; 13(34): 7499-7510.

[46] Li P, Allain M, Grünewald TA, et al. 4th generation synchrotron source boosts crystalline imaging at the nanoscale. Light Sci Appl. 2022; 11(1): 73.

[47] Lu W, Zhao L, Su Z, Li J, Hu Q. Recent progress on in-situ characterization of laser additive manufacturing process by synchrotron radiation. J Mater Sci Technol. 2025; 217: 29-46.

[48] Yin J, Deng LF, Ma GQ, et al. High-throughput in situ characterization of polymer crystallization under an intense flow, high pressure, and cooling gradient during injection molding. Macromolecules. 2023; 56(11): 4111-4122.

[49] Chen Y, Hua WQ, Zhang ZC, et al. An efficient, food contact accelerator for stereocomplexation of high-molecular-weight poly(l-lactide)/poly(d-lactide) blend under nonisothermal crystallization. Polymer. 2019; 170: 54-64.

[50] Hua WQ, Yang CM, Zhou P, et al. Time-resolved ultra-small-angle X-ray scattering beamline (BL10U1) at SSRF. Nucl Sci Tech. 2024; 35(2): 36.

[51] Li Z, Wu Z, Mo G, Xing X, Liu P. A small-angle X-ray scattering station at BEIJING synchrotron radiation facility. Instrum Sci Tech. 2014; 42(2): 128-141.

[52] Chu B, Hsiao BS. Small-angle X-ray scattering of polymers. Chem Rev. 2001; 101(6): 1727-1762.

[53] Hoffman JD, Davis GT, Lauritzen JI. The rate of crystallization of linear polymers with chain folding. In: NB Hannay, ed. Treatise on Solid State Chemistry: Volume 3 Crystalline and Noncrystalline Solids. Springer US; 1976: 497-614.

[54] Imai M, Kaji K, Kanaya T, Sakai Y. Ordering process in the induction period of crystallization of poly(ethylene terephthalate). Phys Rev B. 1995; 52(17): 12696-12704.

[55] Strobl G. Colloquium: laws controlling crystallization and melting in bulk polymers. Rev Mod Phys. 2009; 81(3): 1287-1300.

[56] Valdo Meille S, Brückner S. Non-parallel chains in crystalline γ-isotactic polypropylene. Nature. 1989; 340(6233): 455-457.

[57] Lu Y, Lyu D, Zhao X, Men Y. Influence of molecular weight on the nucleation and growth of different crystal forms in isotactic polypropylene: in situ synchrotron microfocus X-ray scattering combined with fast-scanning chip calorimetry investigations. Macromolecules. 2023; 56(7): 2772-2780.

[58] Odarchenko Y, Rosenthal M, Hernandez JJ et al. Assessing fast structure formation processes in isotactic polypropylene with a combination of nanofocus X-ray diffraction and in situ nanocalorimetry. Nanomaterials. 2021; 11(10): 2652.

[59] Nguyen TV, Nagata T, Noso K, et al. Comparison between ultrathin films and the bulk of microbial poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) with regard to their melt-isothermal crystallization kinetics. Macromolecules. 2022; 55(14): 6076-6089.

[60] Narita M, Yoneyama H, Matsunaga T, Harada M. Simultaneous study of anionic polymerization of ε-caprolactam and crystallization of polyamide 6 in an isothermal process by in situ WAXS. Polym J. 2020; 52(2): 199-206.

[61] Wang Y, Xu JZ, Chen YH, et al. Crystalline structure changes in preoriented metallocene-based isotactic polypropylene upon annealing. J Phys Chem B. 2013; 117(23): 7113-7122.

[62] Quan L, Zhang X, Xia W, et al. In situ synchrotron X-ray scattering studies on the temperature dependence of oriented β-crystal growth in isotactic polypropylene. Polym Test. 2020; 90:106660.

[63] Qiao Y, Wang H, Men Y. Retardance of form II to form I transition in polybutene-1 at late stage: a proposal of a new mechanism. Macromolecules. 2018; 51(6): 2232-2239.

[64] Wang B, He K, Lu Y, et al. Nucleation mechanism for form II to I polymorphic transformation in polybutene-1. Macromolecules. 2020; 53(15): 6476-6485.

[65] Jin X, Zhang Q, Xiong Y, et al. Molecular mechanism of surface melting of Polyamide12 as elucidated by synchrotron radiation X-ray scattering and 1H spin diffusion NMR. Macromolecules. 2024; 57(3): 1277-1290.

[66] Pan P, Bao J, Han L, Xie Q, Shan G, Bao Y. Stereocomplexation of high-molecular-weight enantiomeric poly(lactic acid)s enhanced by miscible polymer blending with hydrogen bond interactions. Polymer. 2016; 98: 80-87.

[67] Cui K, Ma Z, Tian N, Su F, Liu D, Li L. Multiscale and multistep ordering of flow-induced nucleation of polymers. Chem Rev. 2018; 118(4): 1840-1886.

[68] Somani RH, Hsiao BS, Nogales A, et al. Structure development during shear flow-induced crystallization of i-PP: in-situ small-angle X-ray scattering study. Macromolecules. 2000; 33(25): 9385-9394.

[69] Liu Y, Zhou W, Cui K, et al. Extensional rheometer for in situ x-ray scattering study on flow-induced crystallization of polymer. Rev Sci Instrum. 2011; 82(4):045104.

[70] Lu Y, Yang E, Zhu J, et al. A stretching apparatus with broad strain rate and temperature ranges for in-situ x-ray scattering measurements of polymers. Rev Sci Instrum. 2024; 95(9):093907.

[71] Prado RMB, Mishra S, Ahmad H, Burghardt WR, Kundu S. Capturing the transient microstructure of a physically assembled gel subjected to temperature and large deformation. Macromolecules. 2021; 54(19): 8946-8959.

[72] Keum JK, Zuo F, Hsiao BS. Formation and stability of shear-induced shish-kebab structure in highly entangled melts of UHMWPE/HDPE blends. Macromolecules. 2008; 41(13): 4766-4776.

[73] Deng B, Chen L, Li X, Wang Z. Influence of prereserved shish crystals on the structural evolution of ultrahigh-molecular weight polyethylene films during the hot stretching process. Macromolecules. 2022; 55(11): 4600-4613.

[74] Chu Z, Liu L, Lou Y, Zhao R, Ma Z. Flow-induced crystallization of crosslinked poly(vinylidene fluoride) at elevated temperatures: formation and evolution of the electroactive β-phase. Industrial and Eng Chem Res. 2020; 59(10): 4459-4471.

[75] Xu JZ, Chen C, Wang Y, Tang H, Hsiao BS. Graphene nanosheets and shear flow induced crystallization in isotactic polypropylene nanocomposites. Macromolecules. 2011; 44(8): 2808-2818.

[76] Miao W, Wu F, Zhou S, Yao G, Li Y, Wang Z. Epitaxial crystallization of poly(ε-caprolactone) on reduced graphene oxide at a low shear rate by in situ SAXS/WAXD methods. ACS Omega. 2020; 5(49): 31535-31542.

[77] Luo B, Li H, Zhang Y, et al. Wall slip effect on shear-induced crystallization behavior of isotactic polypropylene containing β-nucleating agent. Industrial and Eng Chem Res. 2014; 53(34): 13513-13521.

[78] Jacob BJ, Zhang X, Kim J, et al. Particle concentration promotes flow-induced crystallization of high-molecular-weight isotactic polypropylene. Macromolecules. 2024; 57(9): 4396-4409.

[79] Li Y, Yang S, Li YK, et al. Robust interfacial cylindrites of polylactic acid modulated by an intense shear flow field. ACS Sustainable Chem Eng. 2016; 4(6): 3558-3566.

[80] Xu H, Xie L, Chen YH, et al. Strong shear flow-driven simultaneous formation of classic shish-kebab, hybrid shish-kebab, and transcrystallinity in poly(lactic acid)/natural fiber biocomposites. ACS Sustainable Chem Eng. 2013; 1(12): 1619-1629.

[81] Xu H, Xie L, Jiang X, et al. Toward stronger transcrystalline layers in poly(l-lactic acid)/natural fiber biocomposites with the aid of an accelerator of chain mobility. J Phys Chem B. 2014; 118(3): 812-823.

[82] Zhou SY, Niu B, Xie XL, et al. Interfacial shish-kebabs lengthened by coupling effect of in situ flexible nanofibrils and intense shear flow: achieving hierarchy to conquer the conflicts between strength and toughness of polylactide. ACS Appl Mater Interfaces. 2017; 9(11): 10148-10159.

[83] Zhou SY, Huang HD, Ji X, et al. Super-robust polylactide barrier films by building densely oriented lamellae incorporated with ductile in situ nanofibrils of poly(butylene adipate-co-terephthalate). ACS Appl Mater Interfaces. 2016; 8(12): 8096-8109.

[84] Su F, Zhou W, Li X, et al. Flow-induced precursors of isotactic polypropylene: an in situ time and space resolved study with synchrotron radiation scanning X-ray microdiffraction. Macromolecules. 2014; 47(13): 4408-4416.

[85] Niu B, Chen JB, Chen J, Ji X, Zhong GJ. Crystallization of linear low density polyethylene on an in situ oriented isotactic polypropylene substrate manipulated by an extensional flow field. CrystEngComm. 2016; 18(1): 77-91.

[86] Zhu S, Wang S, Huang Y, et al. Bioinspired structural hydrogels with highly ordered hierarchical orientations by flow-induced alignment of nanofibrils. Nat Commun. 2024; 15(1): 118.

[87] Wei QY, Huang JZ, Jia DZ, et al. Integration of stiffness, ductility, heat resistance, and transparency for polylactide films by manipulation of amorphous chain networks and oriented nanocrystals. Macromolecules. 2024; 57(8): 3706-3718.

[88] Zhu J, Liu S, Lu Y, et al. A versatile biaxial stretching device for in situ synchrotron radiation small- and wide-angle x-ray scattering measurements of polymer films. Rev Sci Instrum. 2023; 94(2):023906.

[89] Chen X, Lv F, Lin Y, et al. Structure evolution of polyethylene-plasticizer film at industrially relevant conditions studied by in-situ X-ray scattering: the role of crystal stress. Eur Polym J. 2018; 101: 358-367.

[90] Gao XR, Li Y, Huang HD, et al. Extensional stress-induced orientation and crystallization can regulate the balance of toughness and stiffness of polylactide films: interplay of oriented amorphous chains and crystallites. Macromolecules. 2019; 52(14): 5278-5288.

[91] Lv F, Chen X, Wan C, et al. Deformation of ultrahigh molecular weight polyethylene precursor fiber: crystal slip with or without melting. Macromolecules. 2017; 50(17): 6385-6395.

[92] Pawlak A, Galeski A. Plastic deformation of crystalline polymers: the role of cavitation and crystal plasticity. Macromolecules. 2005; 38(23): 9688-9697.

[93] Chen R, Lu Y, Zhao J, Jiang Z, Men Y. Two-step cavitation in semi-crystalline polymer during stretching at temperature below glass transition. J Polym Sci B Polym Phys. 2016; 54(19): 2007-2014.

[94] Lu Y, Men Y. Cavitation-induced stress whitening in semi-crystalline polymers. Macromol Mater Eng. 2018; 303(11):1800203.

[95] Watanabe K, Suzuki T, Masubuchi Y, Taniguchi T, Takimoto J, Koyama K. Crystallization kinetics of polypropylene under high pressure and steady shear flow. Polymer. 2003; 44(19): 5843-5849.

[96] Van der Beek MHE, Peters GWM, Meijer HEH. Classifying the combined influence of shear rate, temperature, and pressure on crystalline morphology and specific volume of isotactic (Poly)propylene. Macromolecules. 2006; 39(26): 9278-9284.

[97] van der Beek MHE, Peters GWM, Meijer HEH. A dilatometer to measure the influence of cooling rate and melt shearing on specific volume. Int Polym Process. 2005; 20(2): 111-120.

[98] Ma Z, Balzano L, van Erp T, Portale G, Peters GWM. Short-term flow induced crystallization in isotactic polypropylene: how short is short? Macromolecules. 2013; 46(23): 9249-9258.

[99] Yang SG, Zhang Z, Zhou D, et al. Flow and pressure jointly induced ultrahigh melting temperature spherulites with oriented thick lamellae in isotactic polypropylene. Macromolecules. 2015; 48(16): 5834-5844.

[100] Troisi EM, Caelers HJM, Peters GWM. Full characterization of multiphase, multimorphological kinetics in flow-induced crystallization of IPP at elevated pressure. Macromolecules. 2017; 50(10): 3868-3882.

[101] van Erp TB, Balzano L, Peters GWM. Oriented gamma phase in isotactic polypropylene homopolymer. ACS Macro Lett. 2012; 1(5): 618-622.

[102] Troisi EM, Portale G, Ma Z, van Drongelen M, Hermida-Merino D, Peters GWM. Unusual melting behavior in flow induced crystallization of LLDPE: effect of pressure. Macromolecules. 2015; 48(8): 2551-2560.

[103] Ma Z, Balzano L, Peters GWM. Pressure quench of flow-induced crystallization precursors. Macromolecules. 2012; 45(10): 4216-4224.

[104] Yang SG, Zhang Z, Zhang LQ, et al. Unexpected shear dependence of pressure-induced γ-crystals in isotactic polypropylene. Polym Chem. 2015; 6(25): 4588-4596.

[105] Yang SG, Chen YH, Deng BW, Lei J, Li L, Li ZM. Window of pressure and flow to produce β-crystals in isotactic polypropylene mixed with β-nucleating agent. Macromolecules. 2017; 50(12): 4807-4816.

[106] Lin JM, Li Y, Xu L, et al. Evolution of polymorphic structure in β-nucleated isotactic polypropylene under a certain pressure: effects of temperature and flow. Industrial and Eng Chem Res. 2019; 58(14): 5677-5685.

[107] Ru JF, Yang SG, Zhou D, Yin HM, Lei J, Li ZM. Dominant β-form of poly(l-lactic acid) obtained directly from melt under shear and pressure fields. Macromolecules. 2016; 49(10): 3826-3837.

[108] Ru JF, Yang SG, Lei J, Li ZM. Thicker lamellae and higher crystallinity of poly(lactic acid) via applying shear flow and pressure and adding poly(ethylene glycol). J Phys Chem B. 2017; 121(23): 5842-5852.

[109] Zhang XX, Liu Q, Yin J, et al. Promoted Formation of α crystals in the polymorph selection of syndiotatic polystyrene under the coupling of pressure, flow, and temperature. Macromolecules. 2022; 55(12): 5094-5103.

[110] Zhang XX, Yang SG, Zhong GJ, et al. Rapid melt crystallization of bisphenol-A polycarbonate jointly induced by pressure and flow. Macromolecules. 2021; 54(5): 2383-2393.

[111] Rendon S, Fang J, Burghardt WR, Bubeck RA. An apparatus for in situ x-ray scattering measurements during polymer injection molding. Rev Sci Instrum. 2009; 80(4):043902.

[112] Liao T, Zhao X, Yang X, et al. In situ synchrotron small angle X-ray scattering investigation of structural formation of polyethylene upon micro-injection molding. Polymer. 2021; 215:123390.

[113] Zhao X, Liao T, Yang X, et al. Mold temperature- and molar mass-dependent structural formation in micro-injection molding of isotactic polypropylene. Polymer. 2022; 248:124797.

[114] Chen YH, Zhong GJ, Wang Y, Li ZM, Li L. Unusual tuning of mechanical properties of isotactic polypropylene using counteraction of shear flow and β-nucleating agent on β-form nucleation. Macromolecules. 2009; 42(12): 4343-4348.

[115] Guan Q, Shen K, Ji J, Zhu J. Structure and properties of self-reinforced polyethylene prepared by oscillating packing injection molding under low pressure. J Appl Polym Sci. 1995; 55(13): 1797-1804.

[116] Yang HR, Lei J, Li L, Fu Q, Li ZM. Formation of interlinked shish-kebabs in injection-molded polyethylene under the coexistence of lightly cross-linked chain network and oscillation shear flow. Macromolecules. 2012; 45(16): 6600-6610.

[117] Xu H, Zhong GJ, Fu Q, et al. Formation of shish-kebabs in injection-molded poly(l-lactic acid) by application of an intense flow field. ACS Appl Mater Interfaces. 2012; 4(12): 6774-6784.

[118] Huang YF, Xu JZ, Li JS, He BX, Xu L. Mechanical properties and biocompatibility of melt processed, self-reinforced ultrahigh molecular weight polyethylene. Biomaterials. 2014; 35(25): 6687-6697.

[119] Zhou D, Yang SG, Lei J, Hsiao BS, Li ZM. Role of stably entangled chain network density in shish-kebab formation in polyethylene under an intense flow field. Macromolecules. 2015; 48(18): 6652-6661.

[120] Tsubakihara S, Nakamura A, Yasuniwa M. Hexagonal phase of polyethylene fibers under high pressure. Polym J. 1991; 23(11): 1317-1324.

[121] Deng LF, Yin J, Zhang J, et al. In-situ synchrotron X-ray investigating crystallization of isotactic polypropylene with β-nucleating agent during injection molding. Polymer. 2024; 310:127469.

[122] Yin J, Zhang J, Chen ZY, et al. Flash flow-induced crystallization of poly(l-lactide) under elevated pressure during industrial-scale injection molding revealed by time-resolved synchrotron X-ray scattering. Macromolecules. 2024; 57(21): 10192-10207.

[123] Gururajan G, Shan H, Lickfield G, Ogale AA. Real-time wide-angle X-ray diffraction during polyethylene blown film extrusion. Polym Eng Sci. 2008; 48(8): 1487-1494.

[124] Gururajan G, Ogale AA. Real-time crystalline orientation measurements during low-density polyethylene blown film extrusion using wide-angle X-ray diffraction. Polym Eng Sci. 2012; 52(7): 1532-1536.

[125] van Drongelen M, Cavallo D, Balzano L, et al. Structure development of low-density polyethylenes during film blowing: a real-time wide-angle X-ray diffraction study. Macromol Mater Eng. 2014; 299(12): 1494-1512.

[126] Troisi EM, van Drongelen M, Caelers HJM, Portale G, Peters GWM. Structure evolution during film blowing: an experimental study using in-situ small angle X-ray scattering. Eur Polym J. 2016; 74: 190-208.

[127] Bashirgonbadi A, Delva L, Caron E, Marchesini FH, Van Geem KM, Ragaert K. The interplay between macromolecular structure, rheology, processing condition, and morphology for (linear) low density polyethylenes in film blowing. Polymer. 2024; 290:126566.

[128] Zhang R, Ji Yx, Zhang Ql, et al. A universal blown film apparatus for in situ X-ray measurements. Chin J Polym Sci. 2017; 35(12): 1508-1516.

[129] Zhao H, Zhang Q, Xia Z, et al. Elucidation of the relationships of structure-process-property for different ethylene/α-olefin copolymers during film blowing: an in-situ synchrotron radiation X-ray scattering study. Polym Test. 2020; 85:106439.

[130] Zhang Q, Li L, Su F, et al. From molecular entanglement network to crystal-cross-linked network and crystal scaffold during film blowing of polyethylene: an in situ synchrotron radiation small- and wide-angle X-ray scattering study. Macromolecules. 2018; 51(11): 4350-4362.

[131] Zhang Q, Chen W, Zhao H, et al. In-situ tracking polymer crystallization during film blowing by synchrotron radiation X-ray scattering: the critical role of network. Polymer. 2020; 198:122492.

[132] Zhao H, Li L, Zhang Q, et al. Manipulation of chain entanglement and crystal networks of biodegradable poly(butylene adipate-co-butylene terephthalate) during film blowing through the addition of a chain extender: an in situ synchrotron radiation X-ray scattering study. Biomacromolecules. 2019; 20(10): 3895-3907.

[133] Di Sacco F, Solano E, Malfois M, et al. Real-time structural characterization of isotactic polypropylene during cast film extrusion. Polymer. 2023; 276:125914.

[134] Liu S, Cheng S, Luo Y, et al. A versatile steel belt casting equipment for in situ synchrotron radiation x-ray scattering measurement of polymer films. Rev Sci Instrum. 2024; 95(9):093904.

[135] Cheng H, Zhao Y, Wei X, et al. Supercooling and solvent depletion-driven poly(vinyl alcohol) film formation mechanism as elucidated by in situ synchrotron radiation X-ray scattering. Macromolecules. 2024; 57(4): 1569-1580.

[136] Lv F, Wan C, Chen X, et al. Morphology diagram of PE gel films in wide range temperature-strain space: an in situ SAXS and WAXS study. J Polym Sci B Polym Phys. 2019; 57(12): 748-757.

[137] Gao JW, Chen L, Zhong YS, Xing CW, Li YG, Wang ZB. Structural evolution of ultra-high molecular weight polyethylene low-entangled films with reserved shish crystals during hot stretching. Chin J Polym Sci. 2024; 42(8): 1227-1242.

[138] Chen L, Xing C, Gao J, Li Y, Wang Z. Structural evolution of ultra-high molecular weight polyethylene gel film stretching at different temperatures with reservation of shish crystals. Polymer. 2023; 284:126283.

[139] Tabatabaei SH, Carreau PJ, Ajji A. Effect of processing on the crystalline orientation, morphology, and mechanical properties of polypropylene cast films and microporous membrane formation. Polymer. 2009; 50(17): 4228-4240.

[140] Tabatabaei SH, Carreau PJ, Ajji A. Microporous membranes obtained from PP/HDPE multilayer films by stretching. J Membr Sci. 2009; 345(1-2): 148-159.

[141] Xiong B, Lame O, Chenal JM, Rochas C, Seguela R, Vigier G. In-situ SAXS study and modeling of the cavitation/crystal-shear competition in semi-crystalline polymers: influence of temperature and microstructure in polyethylene. Polymer. 2013; 54(20): 5408-5418.

[142] Wu GG, Chen WB, Ding C, et al. Pore formation mechanism of oriented β polypropylene cast films during stretching and optimization of stretching methods: in-situ SAXS and WAXD studies. Polymer. 2019; 163: 86-95.

[143] Matsui K, Hosaka N, Suzuki K, Shinohara Y, Amemiya Y. Microscopic deformation behavior of hard elastic polypropylene during cold-stretching process in fabrication of microporous membrane as revealed by synchrotron X-ray scattering. Polymer. 2015; 70: 215-221.

[144] Perret R, Ruland W. The microstructure of PAN-base carbon fibres. J Appl Crystallogr. 1970; 3(6): 525-532.

[145] Luijsterburg B, Jobse P, Hermida Merino D, Peijs T, Goossens H. Solid-state drawing of β-nucleated polypropylene: effect of additives on drawability and mechanical properties. J Polym Sci B Polym Phys. 2014; 52(16): 1071-1082.

[146] Tian Y, Zhu C, Gong J, Yang S, Ma J, Xu J. Lamellae break induced formation of shish-kebab during hot stretching of ultra-high molecular weight polyethylene precursor fibers investigated by in situ small angle X-ray scattering. Polymer. 2014; 55(16): 4299-4306.

[147] Samon JM, Schultz JM, Hsiao BS. Study of the cold drawing of nylon 6 fiber by in-situ simultaneous small- and wide-angle X-ray scattering techniques. Polymer. 2000; 41: 2169-2182.

[148] Samon JM, Schultz JM, Hsiao BS, et al. Structure development during the melt spinning of polyethylene and poly(vinylidene fluoride) fibers by in situ synchrotron small- and wide-angle X-ray scattering techniques. Macromolecules. 1999; 32(24): 8121-8132.

[149] Kolb R, Seifert S, Stribeck N, Zachmann HG. Simultaneous measurements of small- and wide-angle X-ray scattering during low speed spinning of poly(propylene) using synchrotron radiation. Polymer. 2000; 41(4): 1497-1505.

[150] Zhong Y, Chen L, Gao J, et al. Structural evolution of high-entanglement ultrahigh molecular weight polyethylene films with reserved shish crystals during the hot stretching process. Macromolecules. 2024; 57(5): 2176-2190.

[151] An M, Lv Y, Yao G, Zhang L, Wang Z. Structural transformation from shish-kebab crystals to micro-fibrils through hot stretching process of gel-spun ultra-high molecular weight polyethylene fibers with high concentration solution. J Polym Sci B Polym Phys. 2018; 56(3): 225-238.

[152] Ryan AJ, Bras W, Hermida Merino D, Cavallo D. The interaction between fundamental and industrial research and experimental developments in the field of polymer crystallization. J Non-Cryst Solids. 2016; 451: 168-178.

[153] Wong J, Altassan A, Rosen DW. Additive manufacturing of fiber-reinforced polymer composites: a technical review and status of design methodologies. Compos B Eng. 2023; 255:110603.

[154] La Gala A, Ceretti DVA, Fiorio R, Cardon L, D'Hooge DR. Comparing pellet- and filament-based additive manufacturing with conventional processing for ABS and PLA parts. J Appl Polym Sci. 2022; 139(44):e53089.

[155] La Gala A, Fiorio R, Ceretti DVA, Erkoç M, Cardon L, D’hooge DR. A combined experimental and modeling study for pellet-fed extrusion-based additive manufacturing to evaluate the impact of the melting efficiency. Materials. 2021; 14(19):5566.

[156] Van Waeleghem T, Cardon L, D’hooge DR. 3D Non-Newtonian deposition flow and thermal simulations to evaluate the scale-up potential for material extrusion of single walled ABS parts with overhang. Addit Manuf. 2024; 86:104191.

[157] Van Waeleghem T, Marchesini FH, Cardon L, D’hooge DR. In silico quantification of 3D thermal gradients and voids during fused filament fabrication deposition to enhance mechanical and dimensional stability. Addit Manuf. 2023; 72:103624.

[158] Shmueli Y, Jiang J, Zhou Y, et al. Simultaneous in situ X-ray scattering and infrared imaging of polymer extrusion in additive manufacturing. ACS Appl Polym Mater. 2019; 1(6): 1559-1567.

[159] Shmueli Y, Lin YC, Lee S, et al. In situ time-resolved X-ray scattering study of isotactic polypropylene in additive manufacturing. ACS Appl Mater Interfaces. 2019; 11(40): 37112-37120.

[160] Yavitt BM, Wiegart L, Salatto D, et al. Structural dynamics in UV curable resins resolved by in situ 3D printing X-ray photon correlation spectroscopy. ACS Appl Polym Mater. 2020; 2(9): 4096-4108.

[161] Yavitt BM, Wiegart L, Salatto D, et al. Spatial-temporal dynamics at the interface of 3D-printed photocurable thermoset resin layers. ACS Applied Engineering Materials. 2023; 1(2): 868-876.

[162] Gomez Lara J, Garcia Garcia HM, Onuma Y, et al. A comparison of the conformability of everolimus-eluting bioresorbable vascular scaffolds to metal platform coronary stents. JACC Cardiovasc Interv. 2010; 3(11): 1190-1198.

[163] Ramachandran K, Miscioscia R, Filippo GD, Pandolfi G, Di Luccio T, Kornfield J. Tube expansion deformation enables in situ synchrotron X-ray scattering measurements during extensional flow-induced crystallization of poly l-lactide near the glass transition. Polymers. 2018; 10(3):288.

[164] Ramachandran K, Di Luccio T, Ailianou A, Kossuth MB, Oberhauser JP, Kornfield JA. Crimping-induced structural gradients explain the lasting strength of poly l-lactide bioresorbable vascular scaffolds during hydrolysis. Proc Natl Acad Sci USA. 2018; 115(41): 10239-10244.

[165] Ramachandran K, Shao Z, Di Luccio T, et al. Tungsten disulfide nanotubes enhance flow-induced crystallization and radio-opacity of polylactide without adversely affecting in vitro toxicity. Acta Biomater. 2022; 138: 313-326.

[166] Rocher L, Ylitalo AS, Di Luccio T, et al. Interaction of poly L-lactide and tungsten disulfide nanotubes studied by in situ X-ray scattering during expansion of PLLA/WS2NT nanocomposite tubes. Polymers. 2021; 13(11):1764.

RIGHTS & PERMISSIONS

2025 The Author(s). Materials Genome Engineering Advances published by Wiley-VCH GmbH on behalf of University of Science and Technology Beijing.