This study reports physical models of clay smear formation along faults. The main factors influencing clay smear are the competence and thickness of the clay layer, and fault throw. Although previous experimental studies acknowledge the impact of competence, to manipulate competence, these studies altered the clay layer instead of the sand layer, leaving the influence of sand unknown. We investigated the competence of shear clay smear in normal faults through water-saturated sandbox analogue modeling experiments, aiming to identify factors influencing the structural evolution of clay smear in normal faults. We used Particle Image Velocimetry (PIV) to track deformation as it offers non-invasive, full-field measurements with high spatial resolution, enabling comprehensive analysis of deformation patterns. In experiments with more competent (stronger) sand layers, steeper branch faults developed as fault throw increased. The resulting clay smear is concentrated along the main fault plane, which was inclined at 60°. In experiments with less competent (weak) sand layers, two extensional overlapping fault segments interact and deform progressively, leading to the formation of continuous clay smear. Clay smear continuity increases as the competence of the sand layer decreases under otherwise identical conditions. Shear clay smear in normal faults is also influenced by the thickness of the clay layer and fault throw. During early stages of faulting, the clay layer undergoes gentle rotation without notable thinning, as the shear stress remains below the threshold required to initiate fault slip. However, during the middle and late stages, continuous clay smear forms through shear localization of faults as distribution becomes more concentrated. In cases with constant clay layer competence and varying sand layer competence, an increasing difference in competence between sand and clay leads to lower continuity of shear clay smear. Therefore, to accurately assess clay smear continuity in normal faults, It is essential to account for the competence contrast between sand and clay layers. Our results show that greater differences in competence reduce the likelihood of continuous smear formation, whereas weaker sand layers facilitate the development of broad, connected clay smear zones.
| [1] |
Adam J, Urai J L, Wieneke B, et al. Shear Localisation and Strain Distribution during Tectonic Faulting—New Insights from Granular-Flow Experiments and High-Resolution Optical Image Correlation Techniques. Journal of Structural Geology, 2005, 272283301.
|
| [2] |
Antonellini M, Aydin A. Effect of Faulting on Fluid Flow in Porous Sandstones: Geometry and Spatial Distribution. AAPG Bulletin, 1994, 783355377.
|
| [3] |
Antonellini M, Cilona A, Tondi E, et al. Fluid Flow Numerical Experiments of Faulted Porous Carbonates, Northwest Sicily (Italy). Marine and Petroleum Geology, 2014, 55: 186-201.
|
| [4] |
Aziz T, Li X Q, Xie X N, et al. A Large-Scale T2 (Late Cretaceous Turonian) Polygonal-Fault System Influenced by Regional Tectonic Stress in the Songliao Basin, Northeast China. Journal of Earth Science, 2025, 362584596.
|
| [5] |
Ballas G, Fossen H, Soliva R. Factors Controlling Permeability of Cataclastic Deformation Bands and Faults in Porous Sandstone Reservoirs. Journal of Structural Geology, 2015, 76: 1-21.
|
| [6] |
Balthasar K, Gudehus G, Külzer M, et al. Thin Layer Shearing of a Highly Plastic Clay. Nonlinear Processes in Geophysics, 2006, 136671680.
|
| [7] |
Berg S S, Skar T. Controls on Damage Zone Asymmetry of a Normal Fault Zone: Outcrop Analyses of a Segment of the Moab Fault, SE Utah. Journal of Structural Geology, 2005, 271018031822.
|
| [8] |
Çiftçi N B, Giger S B, Clennell M B. Three-Dimensional Structure of Experimentally Produced Clay Smears: Implications for Fault Seal Analysis. AAPG Bulletin, 2013, 975733757.
|
| [9] |
Clarke S M, Burley S D, Williams G D. A Three-Dimensional Approach to Fault Seal Analysis: Fault-Block Juxtaposition & Argillaceous Smear Modelling. Basin Research, 2005, 172269288.
|
| [10] |
Clausen J A, Gabrielsen R H. Parameters that Control the Development of Clay Smear at Low Stress States: An Experimental Study Using Ring-Shear Apparatus. Journal of Structural Geology, 2002, 241015691586.
|
| [11] |
Cuisiat F, Skurtveit E. An Experimental Investigation of the Development and Permeability of Clay Smears along Faults in Uncemented Sediments. Journal of Structural Geology, 2010, 321118501863.
|
| [12] |
Davies R K, Knipe R J, Souque C, et al. Predicting Fault Zone Architecture in the Subsurface from Outcrop Analogues and the Expected Impact on Flow. 2nd EAGE International Conference on Fault and Top Seals—From Pore to Basin Scale 2009. Montpellier, 2009, Montpellier: European Association of Geoscientists & Engineers
|
| [13] |
Du X Y, Jin Z J, Zeng L B, et al. Characteristics and Controlling Factors of Natural Fractures in Deep Lacustrine Shale Oil Reservoirs of the Permian Fengcheng Formation in the Mahu Sag, Junggar Basin, China. Journal of Structural Geology, 2023, 175: 104923.
|
| [14] |
Egholm D L, Clausen O R, Sandiford M, et al. The Mechanics of Clay Smearing along Faults. Geology, 2008, 3610787.
|
| [15] |
Fossen H, Soliva R, Ballas G, et al. A Review of Deformation Bands in Reservoir Sandstones: Geometries, Mechanisms and Distribution. Geological Society, London, Special Publications, 2018, 4591933.
|
| [16] |
Fu X F, Jiang M M, Hu Z M, et al. Quantification of Factors Affecting Fault Sealing by Using Machine Learning: Shuangtaizi Fault Anticline, Southern Margin of the Liaohe Western Depression, Northeastern China. Marine and Petroleum Geology, 2024, 168: 106999.
|
| [17] |
Giger S B, Clennell M B, Çiftçi N B, et al. Fault Transmissibility in Clastic-Argillaceous Sequences Controlled by Clay Smear Evolution. AAPG Bulletin, 2013, 975705731.
|
| [18] |
Gudehus G, Karcher C. Hypoplastic Simulation of Normal Faults without and with Clay Smears. Journal of Structural Geology, 2007, 293530540.
|
| [19] |
Holland M, van Gent H, Bazalgette L, et al. Evolution of Dilatant Fracture Networks in a Normal Fault—Evidence from 4D Model Experiments. Earth and Planetary Science Letters, 2011, 3043/4399406.
|
| [20] |
Jiang M M, Fu X F, Liu Q Y. The Development of Deformation Bands from Experiments: Review and Perspective. Petroleum Science, 2026, 232563581.
|
| [21] |
Jiang M M, Fu X F, Wang Z C. An Experimental Investigation of the Characteristics of Cataclastic Bands in High-Porosity Sandstones. Geological Society of America Bulletin, 2024, 1367/830693084.
|
| [22] |
Jiang M M, Jin Y J, Fu X F, et al. The Development of Cataclastic Bands in High-Porosity Sandstones: Insights from Ring Shear Experiments. Journal of Structural Geology, 2023, 175: 104952.
|
| [23] |
Jiang M M, Jin Y J, Fu X F, et al. Physical Simulation and Quantitative Characterization of Fault Zones Based on Ring-Shear Experiments. Advances in Geo-Energy Research, 2025, 173256266.
|
| [24] |
Jiang M M, Liu Q Y, Cheng J X. Quantitative Evaluation of Lateral Sealing of Faults in Metamorphic Rocks: A Case Study of Bohai Bay Basin in China. Petroleum Science, 2025, 221248394855.
|
| [25] |
Jiang M, Fu X, Shi L, et al. Physical Analogue Experiment of Microstructure and Variation Law of Permeability within Faults in High-Porosity Sandstone. Earth Science, 2022, 47518051818(in Chinese with English Abstract)
|
| [26] |
Kettermann M, Urai J L, Vrolijk P J. Evolution of Structure and Permeability of Normal Faults with Clay Smear: Insights from Water-Saturated Sandbox Models and Numerical Simulations. Journal of Geophysical Research: Solid Earth, 2017, 122316971725.
|
| [27] |
Lindsay N G, Murphy F C, Walsh J J, et al. Flint S S, Bryant I D, et al. Outcrop Studies of Shale Smears on Fault Surface. The Geological Modelling of Hydrocarbon Reservoirs and Outcrop Analogues, 2009, Oxford: Blackwell Publishing Ltd.
|
| [28] |
Liu G P, Jin Z J, Zeng L B, et al. Laminar Controls on Bedding-Parallel Fractures in Permian Lacustrine Shales, Junggar Basin, Northwestern China. Geological Society of America Bulletin, 2025, 1377/835123526.
|
| [29] |
Liu G P, Jin Z J, Zeng L B, et al. Natural Fractures and Their Effectiveness in Deep Tight Sandstone Reservoirs of Foreland Thrust Belts in the Southern Junggar Basin, China. Petroleum Science, 2025, 22830863100.
|
| [30] |
Noorsalehi-Garakani S, Kleine Vennekate G J, Vrolijk P, et al. Clay-Smear Continuity and Normal Fault Zone Geometry—First Results from Excavated Sandbox Models. Journal of Structural Geology, 2013, 57: 58-80.
|
| [31] |
Pei Y W, Paton D A, Knipe R J, et al. A Review of Fault Sealing Behaviour and Its Evaluation in Siliciclastic Rocks. Earth-Science Reviews, 2015, 150: 121-138.
|
| [32] |
Pickering G, Peacock D C P, Sanderson D J, et al. Modeling Tip Zones to Predict the Throw and Length Characteristics of Faults. AAPG Bulletin, 1997, 8118299.
|
| [33] |
Schmatz J, Holland M, Giese S, et al. Clay Smear Processes in Mechanically Layered Sequences—Results of Water-Saturated Model Experiments with Free Top Surface. Journal of the Geological Society of India, 2010, 7517488.
|
| [34] |
Schmatz J, Vrolijk P J, Urai J L. Clay Smear in Normal Fault Zones—The Effect of Multilayers and Clay Cementation in Water-Saturated Model Experiments. Journal of Structural Geology, 2010, 321118341849.
|
| [35] |
Sperrevik S, Færseth R B, Gabrielsen R H. Experiments on Clay Smear Formation along Faults. Petroleum Geoscience, 2000, 62113123.
|
| [36] |
Takahashi M. Permeability Change during Experimental Fault Smearing. Journal of Geophysical Research: Solid Earth, 2003, 108B52002JB001984.
|
| [37] |
van der Meer J J M, Menzies J, Rose J. Subglacial Till: The Deforming Glacier Bed. Quaternary Science Reviews, 2003, 2215/16/1716591685.
|
| [38] |
van der Zee W, Urai J L, Richard P D. Lateral Clay Injection into Normal Faults. GeoArabia, 2003, 83501522.
|
| [39] |
Vrolijk P J, Urai J L, Kettermann M. Clay Smear: Review of Mechanisms and Applications. Journal of Structural Geology, 2016, 86: 95-152.
|
| [40] |
Wang G, Mitchell T M, Meredith P G, et al. Influence of Gouge Thickness and Grain Size on Permeability of Macrofractured Basalt. Journal of Geophysical Research: Solid Earth, 2016, 1211284728487.
|
| [41] |
Welch M J, Knipe R J, Souque C, et al. A Quadshear Kinematic Model for Folding and Clay Smear Development in Fault Zones. Tectonophysics, 2009, 4713/4186202.
|
| [42] |
Yielding G. Using Probabilistic Shale Smear Modelling to Relate SGR Predictions of Column Height to Fault-Zone Heterogeneity. Petroleum Geoscience, 2012, 1813342.
|
| [43] |
Yielding G, Freeman B. Fault Seals: Smears, Holes and SGR. 81st EAGE Conference and Exhibition 2019, 2019, London: European Association of Geoscientists & Engineers, London
|
Rights & permissions
China University of Geosciences (Wuhan) and Springer-Verlag GmbH Germany, Part of Springer Nature
PDF
