Mechanical Characteristics and Mechanism of Granite Subjected to Coupling Effect of Acidic Corrosion and Freeze-Thaw Cycles

Abstract

The typical climatic and environmental conditions in Central Asia are major natural factors causing local rock masses to face considerable risks of damage due to constant freeze-thaw cycles. In addition, these are exacerbated by the dense acidic environments in certain industrialized areas, such as Northern Sinkiang, China. To provide local engineering design with workable solutions, it is crucial to analyze the mechanical performance of rock masses and its mechanisms under the coupling action of corrosive acid and freeze-thaw cycles. In this study, granite samples from the northern Tien Shan Mountains near Urumchi, Xinjiang Province, as well as two kinds of sandstone samples for comparison, were subjected to different soaking conditions, including nitric acid soaking at various pH values. One or both of the freeze-thaw cycle tests and uniaxial compression test were then executed. Speculations regarding the mechanism of the performance of granite rock masses under the action of corrosive acid and freeze-thaw cycles were developed based on the results of these tests. X-ray diffraction and scanning electron microscopy were implemented to demonstrate the feasibility of the speculated mechanism. In this paper, the identification of the white crumb-like substance as SiO₂ gel were confirmed.

Keywords

granite / sandstone / acidic environment / freeze-thaw cycle test / XRD / SEM

References

[1] Alina V, Zita P, Ákos T. The Influence of Freeze-Thaw and Heat on the Strength of Ten Different Rock Types. Geophysical Research Abstracts, 2013, 15: 13930

[2] Chen S L, Feng X T, Li S J. Effects of Chemical Erosion on Uniaxial Compressive Strength and Meso-Fracturing Behaviors of Rock. Chinese Journal of Rock Mechanics and Engineering, 2003, 22(4): 547-551. (in Chinese with English Abstract)

[3] Chen S L, Feng X T, Li S J. The Effects of Chemical Erosion on Mechanical Behaviors of Xiaolangdi Sandstone. Rock and Soil Mechanics, 2002, 23(3): 284-287. 296 (in Chinese with English Abstract)

[4] Chen T C, Yeung M R, Mori N. Effect of Water Saturation on Deterioration of Welded Tuff Due to Freeze-Thaw Action. Cold Regions Science and Technology, 2004, 38(2/3): 127-136.

[5] Ciantia M O, Castellanza R, Prisco C. Experimental Study on the Water-Induced Weakening of Calcarenites. Rock Mechanics and Rock Engineering, 2015, 48(2): 441-461.

[6] Cui Q, Feng X T, Xue Q, . Mechanism Study of Porosity Structure Change of Sandstone under Chemical Corrosion. Chinese Journal of Rock Mechanics and Engineering, 2008, 27(6): 1209-1216. (in Chinese with English Abstract)

[7] Feng Q W. The Late Paleozoic Geodynamical Environment of Central Asia: Evidence from Dark Dykes: [Dissertation], 2012, Beijing: Chinese Academy of Geological Sciences (in Chinese with English Abstract)

[8] Feng X T, Seto M. A New Method of Modelling the Rock Micro-Fracturing Process in Double-Torsion Experiments Using Neural Networks. International Journal for Numerical and Analytical Methods in Geomechanics, 1999, 23(9): 905-923.

[9] Feng X T, Seto M. Neural Network Dynamic Modeling of Acoustic Emission Sequences in Rock. Safety Engineering, 1998, 37(3): 157-163

[10] Feucht L J, Logan J M. Effects of Chemically Active Solutions on Shearing Behavior of a Sandstone. Tectonophysics, 1990, 175(1/2/3): 159-176.

[11] Fleer V N. The Dissolution Kinetics of Anorthite (CaAl₂Si₂O₈) and Synthetic Strontium Feldspar (SrAl₂Si₂O₈) in Aqueous Solutions at Temperatures below 100 °C: With Applications to the Geological Disposal of Radioactive Nuclear Wastes: [Dissertation], 1982, University Park: Pennsylvania State University

[12] Ghobadi M H, Babazadeh R. Experimental Studies on the Effects of Cyclic Freezing-Thawing, Salt Crystallization, and Thermal Shock on the Physical and Mechanical Characteristics of Selected Sandstones. Rock Mechanics and Rock Engineering, 2015, 48(3): 1001-1016.

[13] Han T L, Shi J P, Cao X S. Fracturing and Damage to Sandstone under Coupling Effects of Chemical Corrosion and Freeze-Thaw Cycles. Rock Mechanics and Rock Engineering, 2016, 49(11): 4245-4255.

[14] Hori M, Morihiro H. Micromechanical Analysis on Deterioration due to Freezing and Thawing in Porous Brittle Materials. International Journal of Engineering Science, 1998, 36(4): 511-522.

[15] Huang S B, Liu Q S, Cheng A P, . A Statistical Damage Constitutive Model under Freeze-Thaw and Loading for Rock and Its Engineering Application. Cold Regions Science and Technology, 2018, 145 142-150.

[16] Huo R K, Yang J Q, Yao Z F, . Study of Physical and Mechanical Characteristics of Sandstone Subjected to Hydrochloric Acid Attack. Rock and Soil Mechanics, 2007, 28(S1): 45-48. (in Chinese with English Abstract)

[17] Hutchinson A J, Johnson J B, Thompson G E, . Stone Degradation Due to Wet Deposition of Pollutants. Corrosion Science, 1993, 34(11): 1881-1898.

[18] Jia H L, Xiang W, Krautblatter M. Quantifying Rock Fatigue and Decreasing Compressive and Tensile Strength after Repeated Freeze-Thaw Cycles. Permafrost and Periglacial Processes, 2015, 26(4): 368-377.

[19] Jiang L H, Chen Y L, Liu M L. Experimental Study of Mechanical Properties of Granite under High/Low Temperature Freeze-Thaw Cycles. Rock and Soil Mechanics, 2011, 32(S2): 319-323. (in Chinese with English Abstract)

[20] Lasaga A C. Chemical Kinetics of Water-Rock Interactions. Journal of Geophysical Research: Solid Earth, 1984, 89(B6): 4009-4025.

[21] Li Z, Chen Y L, Wang S R, . Experimental Research on Mechanical Properties of Sandstone after Chemical Corrosion and High Temperature Exposure. Journal of University of Shanghai for Science and Technology, 2019, 41: 244-252. (in Chinese with English Abstract)

[22] Meng Y K, Xiong F H, Yang J S, . Tectonic Implications and Petrogenesis of the Various Types of Magmatic Rocks from the Zedang Area in Southern Tibet. Journal of Earth Science, 2019, 30(6): 1125-1143.

[23] Ni J, Chen Y L, Wang P, . Effect of Chemical Erosion and Freeze-Thaw Cycling on the Physical and Mechanical Characteristics of Granites. Bulletin of Engineering Geology and the Environment, 2017, 76(1): 169-179.

[24] Özbek A. Investigation of the Effects of Wetting-Drying and Freezing-Thawing Cycles on some Physical and Mechanical Properties of Selected Ignimbrites. Bulletin of Engineering Geology and the Environment, 2014, 73(2): 595-609.

[25] Ozcelik Y, Careddu N, Yilmazkaya E. The Effects of Freeze-Thaw Cycles on the Gloss Values of Polished Stone Surfaces. Cold Regions Science and Technology, 2012, 82: 49-55.

[26] Rimstidt J D, Barnes H L. The Kinetics of Silica-Water Reactions. Geochimica et Cosmochimica Acta, 1980, 44(11): 1683-1699.

[27] Tan Z Y, Liu W J, Bi L P, . Experimental Simulation of Rock Strength Damage and Its Environmental Effect. Chin. Min. Mag., 2001, 10(4): 50-53. (in Chinese with English Abstract)

[28] Tan Z Y, Chai H B, Liu W J, . Rock Strength Deterioration under Acidified Conditions and Its Static Accelerated Simulation. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(14): 2439-2448. (in Chinese with English Abstract)

[29] Ulusay R. The ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 2007–2014, 2015, Cham: Springer International Publishing

[30] Wang P, Xu J Y, Liu S, . Static and Dynamic Mechanical Properties of Sedimentary Rock after Freeze-Thaw or Thermal Shock Weathering. Engineering Geology, 2016, 210: 148-157.

[31] Wang S J, Li X P, Duan W Y, . Record of Early-Stage Rodingitization from the Purang Ophiolite Complex, Western Tibet. Journal of Earth Science, 2019, 30(6): 1108-1124.

[32] Xu C, Chen Y L, Wang S R, . Mechanical Properties of Tonalite Subjected to Combined Effects of Chemical Corrosion and Freeze-Thaw Cycles. Applied Sciences, 2019, 9 18 3890