A Fast Separation Method for Isotope Analysis Based on Compressed Nitrogen Gas and Ion-Exchange Chromatography Technique—A Case Study of Sr-Nd Isotope Measurement

Abstract

High-purity N₂ was used to increase the mobile phase flow rate during ion purification of ion-exchange resin. This was performed to improve the efficiency of isotope separation and purification, and to meet the efficiency requirements of rapid multiple-collector-inductively coupled plasma mass spectrometry (MC-ICPMS) analysis. For Cu isotope separation, our results indicated that at a gas flow rate >60 mL/min, the separation chromatographic peaks broadened and the recovery rate decreased to <99.2%. On the other hand, no significant change in the Cu peaks was observed at a gas flow rate of 20 mL/min and the recovery rate was determined to be >99.9%. The Cu isotope ratio, measured by the standard-sample bracketing method, agreed with reference data within a ±2 SD error range. The separation time was reduced from the traditional 10 h (without N₂) to 4 h (with N₂), indicating that the efficiency was more than doubled. Moreover, Sr and Nd isotope separation in AGV-2 (US Geological Survey andesite standard sample) accelerated with a 20 mL/min gas flow, demonstrating that with the passage of N₂, the purified liquid comprised Rb/Sr and Sm/Nd ratios of <0.000 049 and <0.000 001 5, respectively. This indicated an effective separation of Rb from Sr and Sm from Nd. MC-ICPMS could therefore be applied to accurately determine Sr and Nd isotope ratios. The results afforded were consistent with the reference data within a ±2 SD error range and the total separation time was shortened from 2 d to <10 h.

Keywords

fast isotope purification / MC-ICPMS / N₂ gas flow / Cu isotope / Sr-Nd isotopes

References

[1] Bast R., Scherer E. E., Sprung P., . A Rapid and Efficient Ion-Exchange Chromatography for Lu-Hf, Sm-Nd, and Rb-Sr Geochronology and the Routine Isotope Analysis of Sub-Ng Amounts of Hf by MC-ICP-MS. Journal of Analytical Atomic Spectrometry, 2015, 30(11): 2323-2333.

[2] Beard B. L., Johnson C. M., Skulan J. L., . Application of Fe Isotopes to Tracing the Geochemical and Biological Cycling of Fe. Chemical Geology, 2003, 195(1/2/3/4): 87-117.

[3] Bizzarro M., Baker J. A., Ulfbeck D. A New Digestion and Chemical Separation Technique for Rapid and Highly Reproducible Determination of Lu/Hf and Hf Isotope Ratios in Geological Materials by MC-ICP-MS. Geostandards and Geoanalytical Research, 2003, 27(2): 133-145.

[4] Blättler C. L., Higgins J. A. Calcium Isotopes in Evaporites Record Variations in Phanerozoic Seawater SO4 and Ca. Geology, 2014, 42(8): 711-714.

[5] Blichert-Toft J., Chauvel C., Albarède F. Separation of Hf and Lu for High-Precision Isotope Analysis of Rock Samples by Magnetic Sector-Multiple Collector ICP-MS. Contributions to Mineralogy and Petrology, 1997, 127(3): 248-260.

[6] Blichert-Toft J. On the Lu-Hf Isotope Geochemistry of Silicate Rocks. Geostandards and Geoanalytical Research, 2001, 25(1): 41-56.

[7] Dong S. F., Wasylenki L. E. Zinc Isotope Fractionation during Adsorption to Calcite at High and Low Ionic Strength. Chemical Geology, 2016, 447: 70-78.

[8] Enge T. G., Field M. P., Jolley D. F., . An Automated Chromatography Procedure Optimized for Analysis of Stable Cu Isotopes from Biological Materials. Journal of Analytical Atomic Spectrometry, 2016, 31(10): 2023-2030.

[9] Field M. P., Romaniello S. J., Gordon G. W., . Automated Sample Preparation for Radiogenic and Non-Traditional Metal Isotope Analysis by MC-ICP-MS, 2012.

[10] Gao T., Ke S., Teng F. Z., . Magnesium Isotope Fractionation during Dolostone Weathering. Chemical Geology, 2016, 445: 14-23.

[11] Halliday A. N., Lee D. C., Christensen J. N., . Recent Developments in Inductively Coupled Plasma Magnetic Sector Multiple Collector Mass Spectrometry. International Journal of Mass Spectrometry and Ion Processes, 1995, 146/147: 21-33.

[12] Jochum K. P., Nohl U., Herwig K., . GeoReM:^A New Geochemical Database for Reference Materials and Isotopic Standards. Geostandards and Geoanalytical Research, 2005, 29(3): 333-338.

[13] Jochum K. P., Weis U., Schwager B., . Reference Values Following ISO Guidelines for Frequently Requested Rock Reference Materials. Geostandards and Geoanalytical Research, 2016, 40(3): 333-350.

[14] Kleinhanns I. C., Kreissig K., Kamber B. S., . Combined Chemical Separation of Lu, Hf, Sm, Nd, and REEs from a Single Rock Digest: Precise and Accurate Isotope Determinations of Lu-Hf and Sm-Nd Using Multicollector-ICPMS. Analytical Chemistry, 2002, 74(1): 67-73.

[15] Lapen T. J., Mahlen N. J., Johnson C. M., . High Precision Lu and Hf Isotope Analyses of both Spiked and Unspiked Samples: A New Approach. Geochemistry, Geophysics, Geosystems, 2004, 5 1 01010

[16] Li C. F., Chu Z.-Y., Guo J.-H., . A Rapid Single Column Separation Scheme for High-Precision Sr-Nd-Pb Isotopic Analysis in Geological Samples Using Thermal Ionization Mass Spectrometry. Analytical Methods, 2015, 7(11): 4793-4802.

[17] Meynadier L., Gorge C., Birck J. L., . Automated Separation of Sr from Natural Water Samples or Carbonate Rocks by High Performance Ion Chromatography. Chemical Geology, 2006, 227(1/2): 26-36.

[18] Münker C., Weyer S., Scherer E., . Separation of High Field Strength Elements (Nb, Ta, Zr, Hf) and Lu from Rock Samples for MC-ICPMS Measurements. Geochemistry, Geophysics, Geosystems, 2001, 2 12 2001

[19] Romaniello S. J., Field M. P., Smith H. B., . Fully Automated Chromatographic Purification of Sr and Ca for Isotopic Analysis. Journal of Analytical Atomic Spectrometry, 2015, 30(9): 1906-1912.

[20] Ryu J.-S., Vigier N., Decarreau A., . Experimental Investigation of Mg Isotope Fractionation during Mineral Dissolution and Clay Formation. Chemical Geology, 2016, 445: 135-145.

[21] Salters V. J. M. 176Hf/177Hf Determination in Small Samples by a High-Temperature SIMS Technique. Analytical Chemistry, 1994, 66(23): 4186-4189.

[22] Sikdar J., Rai V. K. Simultaneous Chromatographic Purification of Si and Mg for Isotopic Analyses Using MC-ICPMS. Journal of Analytical Atomic Spectrometry, 2017, 32(4): 822-833.

[23] Tanaka T., Togashi S., Kamioka H., . JNdi-1:^A Neodymium Isotopic Reference in Consistency with LaJolla Neodymium. Chemical Geology, 2000, 168(3/4): 279-281.

[24] Teng F.-Z., Rudnick R. L., McDonough W. F., . Lithium Isotopic Systematics of A-Type Granites and Their Mafic Enclaves: Further Constraints on the Li Isotopic Composition of the Continental Crust. Chemical Geology, 2009, 262(3/4): 370-379.

[25] Ulfbeck D., Baker J., Waight T., . Rapid Sample Digestion by Fusion and Chemical Separation of Hf for Isotopic Analysis by MC-ICPMS. Talanta, 2003, 59(2): 365-373.

[26] Yang Y.-H., Zhang H.-F., Chu Z.-Y., . Combined Chemical Separation of Lu, Hf, Rb, Sr, Sm and Nd from a Single Rock Digest and Precise and Accurate Isotope Determinations of Lu-Hf, Rb-Sr and Sm-Nd Isotope Systems Using Multi-Collector ICP-MS and TIMS. International Journal of Mass Spectrometry, 2010, 290(2/3): 120-126.

[27] Yuan H. L., Yuan W. T., Bao Z. A., . Development of Two New Copper Isotope Standard Solutions and Their Copper Isotopic Compositions. Geostandards and Geoanalytical Research, 2017, 41(1): 77-84.

[28] Zheng X.-Y., Beard B. L., Lee S., . Contrasting Particle Size Distributions and Fe Isotope Fractionations during Nanosecond and Femtosecond Laser Ablation of Fe Minerals: Implications for LA-MC-ICP-MS Analysis of Stable Isotopes. Chemical Geology, 2017, 450: 235-247.

[29] Zhu C., Liu Z. Y., Zhang Y. L., . Measuring Silicate Mineral Dissolution Rates Using Si Isotope Doping. Chemical Geology, 2016, 445: 146-163.