Study on estimation method of rock mass discontinuity shear strength based on three-dimensional laser scanning and image technique

Abstract

The estimation of shear strength of rock mass discontinuity is always a focal, but difficult, problem in the field of geotechnical engineering. Considering the disadvantages and limitation of existing estimation methods, a new approach based on the shadow area percentage (SAP) that can be used to quantify surface roughness is proposed in this article. Firstly, by the help of laser scanning technique, the three-dimensional model of the surface of rock discontinuity was established. Secondly, a light source was simulated, and there would be some shadows produced on the model surface. Thirdly, to obtain the value of SAP of each specimen, the shadow detection technique was introduced for use. Fourthly, compared with the result from direct shear testing and based on statistics, an empirical formula was found among SAP, normal stress, and shear strength. Data of Yujian (鱼简) River were used as an example, and the following conclusions have been made. (1) In the case of equal normal stress, the peak shear stress is positively proportional to the SAP. (2) The formula for estimating was derived, and the predictions of peak-shear strength made with this equation well agreed with the experimental results obtained in laboratory tests.

Keywords

rock mechanics / rock mass discontinuity / shear strength / estimation method / three-dimensional laser scanning technique / image recognition technique

References

Barton N., Choubey V. The Shear Strength of Rock Joints in Theory and Practice. Rock Mech., 1977, 10: 1-54.

Du S. G. The Engineering Properties of Rock Joints, 1999 Beijing: Earthquake Press, 48-53.

Du S. G., Hu Y. J., Hu X. F., . Comparison between Empirical Estimation by JRC-JCS Model and Direct Shear Test for Joint Shear Strength. Journal of Earth Science, 2011, 22(3): 411-420.

Du S. G., Hu Y. J., Hu X. F. Measurement of Joint Roughness Coefficient by Using Profilograph and Roughness Ruler. Journal of Earth Science, 2009, 20(5): 890-896.

Ge Y. F., Tang H. M., Liu X., . Error Analysis in Direct Shear Rock-Mass Structural Tests. Journal of China University of Mining & Technology, 2011, 40(4): 549-555.

Grasselli, G., Egger, P., 2000. 3D Surface Characterization for the Prediction of the Shear Strength of Rough Joint. In: Proc. Eurock 2000, Aachen, Germany. 281–286

Guo X. Study on Shear Strength-Method of Rock Joints Based on Experimental Comparison: [Dissertation], 2001 Hangzhou: Zhejiang University of Technology, 3-5.

Kulatilake P. H. S. W., Balasingam P., Park J. Y., . Natural Rock Joint Roughness Quantification through Fractal Techniques. Geotechnical and Geological Engineering, 2006, 24: 1181-1202.

Ladanyi B., Archambault G. Simulation of Shear Behaviour of a Jointed Rock Mass. Proc. 11th U.S. Symposium on Rock Mechanics (USRMS), Berkeley, 1970, 7: 1195-1210.

Lee S. W., Hong E. S., Bae S. I., . Modelling of Rock Joint Shear Strength Using Surface Roughness Parameter, R _s. Tunnelling and Underground Sapce Technology, 2006, 21(3–4): 239-244.

Xie M. C. Research of Image Method Applied on the Shear Strength of Artificial Joint Surface: [Dissertation], 2003 Tainan: National Cheng Kung University, 12-75.

Patton F. D. Multiple Modes of Shear Failure in Rock. Proc. First Congress of International Society of Rock Mechanics, 1966 Portugal: Lisbon, 509-513.

Wang W. X., Yang J. M. A Geometric Information on Roughness of Rock Fractures Based on Image Processing. Journal of Chongqing University of Posts and Telecommunications (Natural Science Edition), 2010, 22(4): 454-457.

Yan Y. R. Study on Shear Strength-Method of Rock Joints Applied in Engineering: [Dissertation], 2005 Hangzhou: Zhejiang University of Technology, 19-38.