Applications of engineering seismology for site characterization

Abstract

We determined the seismic model of the soil column within a residential project site in Istanbul, Turkey. Specifically, we conducted a refraction seismic survey at 20 locations using a receiver spread with 484.5-Hz vertical geophones at 2-m intervals. We applied nonlinear tomography to first-arrival times to estimate the P-wave velocity-depth profiles and performed Rayleigh-wave inversion to estimate the S-wave velocity-depth profiles down to a depth of 30 m at each of the locations. We then combined the seismic velocities with the geotechnical borehole information regarding the lithology of the soil column and determined the site-specific geotechnical earthquake engineering parameters for the site. Specifically, we computed the maximum soil amplification ratio, maximum surface-bedrock acceleration ratio, depth interval of significant acceleration, maximum soil-rock response ratio, and design spectrum periods TA-TB. We conducted reflection seismic surveys along five line traverses with lengths between 150 and 300 m and delineated landslide failure surfaces within the site. We recorded shot gathers at 2-m intervals along each of the seismic line traverses using a receiver spread with 4 840-Hz vertical geophones at 2-m intervals. We applied nonlinear tomography to first-arrival times to estimate a P-wave velocity-depth model and analyzed the reflected waves to obtain a seismic image of the deep near-surface along each of the line traverses.

Keywords

engineering seismology / geotechnical engineering / earthquake engineering / shear-wave velocity

References

[1] Bardet J., Ichii K., Lin C.. Manual of EERA: A Computer Program for Equivalent-Linear Earthquake Site Response Analysis of Layered Soil Deposits, 2000, Los Angeles: University of Southern California

[2] Kramer S. L.. Geotechnical Earthquake Engineering, 1996, New Jersey: Prentice-Hall 273

[3] Park C. B., Miller R. D., Xia J.. Multichannel Analysis of Surface Waves. Geophysics, 1999, 64: 800-808.

[4] Schnabel P. B., Lysmer P. B., Seed H. B.. SHAKE: A Computer Program for Earthquake Response Analysis of Horizontally Layered Sites, 1972, Berkeley: Earthquake Engineering Research Center. University of California

[5] Steeples D. W., Miller R. D.. Ward S. H.. Seismic Reflection Methods Applied to Engineering, Environmental, and Groundwater Problems. Geotechnical and Environmental Geophysics, 1990, Tulsa, OK: Soc. of Expl. Geophys. 1-30.

[6] Xia J., Miller R. D., Park C. B.. Estimation of Near-Surface Shear-Wave Velocity by Inversion of Rayleigh Waves. Geophysics, 1999, 64: 691-700.

[7] Yilmaz O.. Seismic Data Analysis—Processing, Inversion, and Interpretation of Seismic Data, 2001, Tulsa, OK: Soc. of Expl. Geophys.

[8] Yilmaz, O., Eser, M., 2002. A Unified Workflow for Engineering Seismology. Expanded Abstracts, 72nd Annual International Meeting of the Society of Exploration Seismologists, Houston, TX

[9] Yilmaz O., Eser M., Berilgen M. M.. A Case Study for Seismic Zonation in Municipal Areas. The Leading Edge, 2006, 25(3): 319-330.

[10] Zhang J., Toksoz M. N.. Nonlinear Refraction Traveltime Tomography. Geophysics, 1997, 63: 1726-1737.