RESEARCH ARTICLE

Soil spatial variability impact on the behavior of a reinforced earth wall

  • Adam HAMROUNI , 1 ,
  • Daniel DIAS 2,3 ,
  • Badreddine SBARTAI 4
Expand
  • 1. Laboratory InfraRES, Mohammed Cherif Messaadia University, SoukAhras 41000, Algeria
  • 2. School of Automotive and Transportation Engineering, Hefei University of Technology, Hefei 230009, China
  • 3. Antea Group, Antony 92160, France
  • 4. Department of Civil Engineering, University of Annaba, Annaba 23000 & LMGHU Laboratory, University of Skikda, Skikda 21000, Algeria

Received date: 06 Feb 2019

Accepted date: 11 Aug 2019

Published date: 15 Apr 2020

Copyright

2020 Higher Education Press and Springer-Verlag GmbH Germany, part of Springer Nature

Abstract

This article presents the soil spatial variability effect on the performance of a reinforced earth wall. The serviceability limit state is considered in the analysis. Both cases of isotropic and anisotropic non-normal random fields are implemented for the soil properties. The Karhunen-Loève expansion method is used for the discretization of the random field. Numerical finite difference models are considered as deterministic models. The Monte Carlo simulation technique is used to obtain the deformation response variability of the reinforced soil retaining wall. The influences of the spatial variability response of the geotechnical system in terms of horizontal facing displacement is presented and discussed. The results obtained show that the spatial variability has an important influence on the facing horizontal displacement as well as on the failure probability.

Cite this article

Adam HAMROUNI , Daniel DIAS , Badreddine SBARTAI . Soil spatial variability impact on the behavior of a reinforced earth wall[J]. Frontiers of Structural and Civil Engineering, 2020 , 14(2) : 518 -531 . DOI: 10.1007/s11709-020-0611-x

1
Griffiths D V, Fenton G A. Bearing capacity of spatially random soil: The undrained clay Prandtl problem revisited. Geotechnique, 2001, 51(4): 351–359

DOI

2
Griffiths D V, Fenton G A, Manoharan N. Bearing capacity of rough rigid strip footing on cohesive soil: Probabilistic study. Journal of Geotechnical and Geoenvironmental Engineering, 2002, 128(9): 743–755

DOI

3
Fenton G A, Griffiths D V. Bearing capacity prediction of spatially random c-ϕ soils. Canadian Geotechnical Journal, 2003, 40(1): 54–65

DOI

4
Popescu R, Deodatis G, Nobahar A. Effect of random heterogeneity of soil properties on bearing capacity. Probabilistic Engineering Mechanics, 2005, 20(4): 324–341

DOI

5
Ahmed A, Soubra A H. Extension of subset simulation approach for uncertainty propagation and global sensitivity analysis. Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, 2012, 6(3): 162–176

DOI

6
Al-Bittar T, Soubra A H. Bearing capacity of strip footing on spatially random soils using sparse polynomial chaos expansion. International Journal for Numerical and Analytical Methods in Geomechanics, 2013, 37(13): 2039–2060

DOI

7
Gheris A, Hamrouni A. Treatment of an expansive soil using vegetable (DISS) fibre. Innovative Infrastructure Solutions, 2020, 5: 34

8
Luo N, Bathurst R J, Javankhoshdel S. Probabilistic stability analysis of simple reinforced slopes by finite element method. Computers and Geotechnics, 2016, 77: 45–55

DOI

9
Pan Q, Dias D. An efficient reliability method combining adaptive Support Vector Machine and Monte Carlo Simulation. Structural Safety, 2017, 67: 85–95

DOI

10
Pan Q, Dias D. Sliced inverse regression-based sparse polynomial chaos expansion for reliability analysis in high dimensions. Reliability Engineering & System Safety, 2017, 167: 484–493

DOI

11
Hamrouni A, Dias D, Sbartai B. Probabilistic analysis of a piled earth platform under a concrete floor slab. Soils Found, 2017, 57(5): 828–839

12
Hamrouni A, Dias D, Sbartai B. Reliability analysis of shallow tunnels using the response surface methodology. Underground Space, 2017, 2(4): 246–258

13
Pan Q, Dias D. Probabilistic analysis of a rock tunnel face using polynomial chaos expansion method. International Journal of Geomechanics, 2018, 18(4): 04018013

DOI

14
Kroetz H, Do N A, Dias D, Beck A T. Reliability of tunnel lining design using the hyperstatic reaction method. Tunnelling and Underground Space Technology, 2018, 77: 59–67

DOI

15
Guo X, Dias D, Carvajal C, Peyras L, Breul P. Reliability analysis of embankment dam sliding stability using the sparse polynomial chaos expansion. Engineering Structures, 2018, 174: 295–307

DOI

16
Hamrouni A, Sbartai B, Dias D. Probabilistic analysis of ultimate seismic bearing capacity of strip foundations. Journal of Rock Mechanics and Geotechnical Engineering, 2018, 10(4): 717–724

DOI

17
Guo X, Dias D, Carvajal C, Peyras L, Breul P. A comparative study of different reliability methods for high dimensional stochastic problems related to earth dam stability analyses. Engineering Structures, 2019, 188: 591–602

DOI

18
Hamrouni A, Dias D, Sbartai B. Probability analysis of shallow circular tunnels in homogeneous soil using the surface response methodology optimized by a genetic algorithm. Tunnelling and Underground Space Technology, 2019, 86: 22–33

DOI

19
Schlosser F, Elias V. Friction in Reinforced Earth. Pittsburgh: A.S.C.E. Convention, 1978, 24–28

20
Abdelouhab A, Dias D, Freitag N. Numerical analysis of the behavior of mechanically stabilized earth walls reinforced with different types of strips. Geotextiles and Geomembranes, 2011, 29(2): 116–129

DOI

21
Abdelouhab A, Dias D, Freitag N. Two-dimensional numerical modeling of Reinforced Earth walls. European Journal of Environmental and Civil Engineering, 2012, 16(10): 1143–1167

DOI

22
Riccio M, Ehrlich M, Dias D. Field monitoring and analyses of the response of a block-faced geogrid wall using fine-grained tropical soils. Geotextiles and Geomembranes, 2014, 42(2): 127–138

DOI

23
Chun B S, Kim K M, Min D K. A study on reliability analysis for reinforced earth retaining walls. In: The Third Asian Geotechnical Conference on Geosynthetics. Seoul: Millpress Science Publishers, 2004, 248–254

24
Sayed S, Dodagoudar G R, Rajagopal K. Reliability analysis of reinforced soil walls under static and seismic forces. Geosynthetics International, 2008, 15(4): 246–257

DOI

25
Sayed S, Dodagoudar G R, Rajagopal K. Finite element reliability analysis of reinforced retaining walls. Geomechanics and Geoengineering, 2010, 5(3): 187–197

DOI

26
Miyata Y, Bathurst R J. Reliability analysis of soil-geogrid pullout models in Japan. Soil and Foundation, 2012, 52(4): 620–633

DOI

27
Miyata Y, Bathurst R J, Allen T M. Reliability analysis of geogrid creep data in Japan. Soil and Foundation, 2014, 54(4): 608–620

DOI

28
Miyata Y, Bathurst R J. Reliability-based analysis of combined installation damage and creep for the tensile rupture limit state of geogrid reinforcement in Japan. Soils and Foundations, 2015, 55(2): 437–446

29
Chalermyanont T, Benson C H. Reliability-based design for internal stability of mechanically stabilized earth walls. Journal of Geotechnical and Geoenvironmental Engineering, 2004, 130(2): 163–173

DOI

30
Sia A H I, Dixon N. Deterministic and reliability-based design: Veneer cover soil stability. Geosynthetics International, 2008, 15(1): 1–13

DOI

31
Thurner R, Schweiger H F. Reliability analysis for geotechnical problems via finite elements—A practical application. In: ISRM International Symposium. Melbourne: International Society for Rock Mechanics and Rock Engineering, 2000, 19–24

32
Lin B H, Yu Y, Bathurst R J, Liu C N. Deterministic and probabilistic prediction of facing deformations of geosynthetic-reinforced MSE walls using a response surface approach. Geotextiles and Geomembranes, 2016, 44(6): 813–823

DOI

33
Yu Y, Bathurst R J. Probabilistic assessment of reinforced soil wall performance using response surface method. Geosynthetics International, 2017, 24(5): 524–542

DOI

34
Hamrouni A, Dias D, Sbartai B. Reliability analysis of a mechanically stabilized earth wall using the surface response methodology optimized by a genetic algorithm. Geomechanics and Engineering, 2018, 15(4): 937–945

35
Dodagoudar G, Sayed S, Rajagopal K. Random field modeling of reinforced retaining walls. International Journal of Geotechnical Engineering, 2015, 9(3): 229–238

36
Ning L, Bathurst R J. Probabilistic analysis of reinforced slopes using RFEM and considering spatial variability of frictional soil properties due to compaction. Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards 2017, 12(2): 87–108

DOI

37
Griffiths D V, Fenton G A. Probabilistic slope stability analysis by finite elements. Journal of Geotechnical and Geoenvironmental Engineering, 2004, 130(5): 507–518

DOI

38
Gay O. Physical and numerical modeling of the effect of a slow slide on foundations of structures. Dissertation for the Doctoral Degree. Grenoble: Joseph Fourier University, 2000

39
Flavigny E, Desrues J, Palayer B. Technical note: Hostun RF sand. Revue Française de Géotechnique, 1990, 53: 67–70

40
Itasca Consulting Group, Inc. FLAC2D–Fast Lagrangian Analysis of Continua in 2 Dimensions. Ver. 7, User’s Manual. Minneapolis: Itasca, 2011

41
Abdelouhab A, Dias D, Freitag N. Physical and analytical modelling of geosynthetic strip pull-out behaviour. Geotextiles and Geomembranes, 2010, 28(1): 44–53

DOI

42
Der Kiureghian A, Ke J B. The stochastic finite element method in structural reliability. Probabilistic Engineering Mechanics, 1988, 3(2): 83–91

DOI

43
Vu-Bac N, Rafiee R, Zhuang X, Lahmer T, Rabczuk T. Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters. Composites. Part B, Engineering, 2015, 68: 446–464

DOI

44
Vu-Bac N, Lahmer T, Zhuang X, Nguyen-Thoi T, Rabczuk T. A software framework for probabilistic sensitivity analysis for computationally expensive models. Advances in Engineering Software, 2016, 100: 19–31

DOI

45
Spanos P D, Ghanem R. Stochastic finite element expansion for random media. Journal of Engineering Mechanics, 1989, 115(5): 1035–1053

DOI

46
Sahraoui Y, Chateauneuf A. the effects of spatial variability of the aggressiveness of soil on system reliability of corroding underground pipelines. International Journal of Pressure Vessels and Piping, 2016, 146: 188–197

DOI

47
Cho S E. Effect of spatial variability of soil properties on slope stability. Engineering Geology, 2007, 92(3–4): 97–109

DOI

48
Cho S E, Park H C. Effect of spatial variability of cross-correlated soil properties on bearing capacity of strip footing. International Journal for Numerical and Analytical Methods in Geomechanics, 2010, 34: 1–26

49
Ghanem R G, Spanos P D. Stochastic Finite Elements: A Spectral Approach. New York: Springer, 1991

50
Sudret B, Berveiller M. Stochastic finite element methods in geotechnical engineering. In: Reliability-based Design in Geotechnical Engineering: Computations and Applications. Oxford: Taylor & Francis, 2008

51
Shinozuka M, Dasgupta G. Stochastic fields and their digital simulation. In: Stochastic Methods in Structural Dynamics. Boston: Martinus Nijhoff Publishers, 1987, 93–133

52
Deodatis G. Stochastic FEM sensitivity analysis of nonlinear dynamic problems. Probabilistic Engineering Mechanics, 1989, 4(3): 135–141

DOI

53
Vanmarcke E. Probabilistic modeling of soil profiles. Journal of Geotechnical Engineering, 1977, 103: 1227–1246

54
Vanmarcke E. Random Fields: Analysis and Synthesis. Cambridge: MIT press, 1983

55
Popescu R. Stochastic variability of soil properties: Data analysis, digital simulation, effects on system behaviour. Dissertation for the Doctoral Degree. Princeton, NJ: Princeton University, 1995

Outlines

/