Structural build-up model for three-dimensional concrete printing based on kinetics theory

Abstract

The thixotropic structural build-up is crucial in extrusion-based three-dimensional (3D) concrete printing. This paper uses a theoretical model to predict the evolution of static and dynamic yield stress for printed concrete. The model employs a structural kinetics framework to create a time-independent constitutive link between shear stress and shear rate. The model considers flocculation, deflocculation, and chemical hydration to anticipate structural buildability. The reversible and irreversible contributions that occur throughout the build-up, breakdown, and hydration are defined based on the proposed structural parameters. Additionally, detailed parametric studies are conducted to evaluate the impact of model parameters. It is revealed that the proposed model is in good agreement with the experimental results, and it effectively characterizes the structural build-up of 3D printable concrete.

Graphical abstract

Keywords

structural build-up / rheology / thixotropy / 3D printable concrete / kinetics theory / ultra high performance concrete

References

[1] Ma G, Wang L. A critical review of preparation design and workability measurement of concrete material for largescale 3D printing. Frontiers of Structural and Civil Engineering, 2018, 12(3): 382–400

[2] Wellala D P, Saha A K, Sarker P K, Rajayogan V. Fresh and hardened properties of high-strength concrete incorporating byproduct fine crushed aggregate as partial replacement of natural sand. Frontiers of Structural and Civil Engineering, 2021, 15(1): 124–135

[3] Kaliyavaradhan S K, Ambily P, Prem P R, Ghodke S B. Test methods for 3D printable concrete. Automation in Construction, 2022, 142: 104529

[4] Giridhar G, Prem P R, Kumar S. Development of concrete mixes for 3D printing using simple tools and techniques. Sadhana, 2023, 48(1): 16

[5] JiaoD,Lesage K,de SchutterG.Application of Active Rheology Control to 3D Printing of Cementitious Materials . Boca Raton: CRC Press, 2023

[6] Yuan Q, Li Z, Zhou D, Huang T, Huang H, Jiao D, Shi C. A feasible method for measuring the buildability of fresh 3D printing mortar. Construction and Building Materials, 2019, 227: 116600

[7] YuanQ,Shi C,JiaoD.Rheology of Fresh Cement-Based Materials: Fundamentals, Measurements, and Applications , Boca Raton: CRC Press, 2022

[8] Wang D, Zhang Y, Xiao J, Shi J, Chen Y, Pang B, Wu M, Liu G, Yang Y. Study on dynamic and static structural build-up of fresh cement paste with limestone powder based on structural kinetics model. Construction and Building Materials, 2021, 305: 124598

[9] Ma S, Qian Y, Kawashima S. Experimental and modeling study on the non-linear structural build-up of fresh cement pastes incorporating viscosity modifying admixtures. Cement and Concrete Research, 2018, 108: 1–9

[10] Navarrete I, Kurama Y, Escalona N, Lopez M. Impact of physical and physicochemical properties of supplementary cementitious materials on structural build-up of cement- based pastes. Cement and Concrete Research, 2020, 130: 105994

[11] Kruger J, Zeranka S, van Zijl G. An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete. Construction and Building Materials, 2019, 224: 372–386

[12] Perrot A, Pierre A, Vitaloni S, Picandet V. Prediction of lateral form pressure exerted by concrete at low casting rates. Materials and Structures, 2015, 48(7): 2315–2322

[13] Perrot A, Rangeard D, Pierre A. Structural built-up of cement-based materials used for 3D-printing extrusion techniques. Materials and Structures, 2016, 49(4): 1213–1220

[14] Jiao D, de Schryver R, Shi C, de Schutter G. Thixotropic structural build-up of cement-based materials: A state-of-the-art review. Cement and Concrete Composites, 2021, 122: 104152

[15] Cheng D C, Evans F. Phenomenological characterization of the rheological behaviour of inelastic reversible thixotropic and antithixotropic fluids. British Journal of Applied Physics, 1965, 16(11): 1599–1617

[16] Cheng D. Thixotropy. International Journal of Cosmetic Science, 1987, 9(4): 151–191

[17] BarnesH A. A Handbook of Elementary Rheology. Aberystwyth: University of Wales, 2000

[18] Jiao D, Shi C, Yuan Q, An X, Liu Y, Li H. Effect of constituents on rheological properties of fresh concrete—A review. Cement and Concrete Composites, 2017, 83: 146–159

[19] Yahia A, Khayat K. Analytical models for estimating yield stress of high-performance pseudoplastic grout. Cement and Concrete Research, 2001, 31(5): 731–738

[20] BinghamE C.Fluidity and Plasticity .McGraw-Hill Book Co ., 1922

[21] Herschel W, Bulkley R. Measurement of consistency as applied to rubber-benzene solutions. American Mathematical Society Proceedings, 1926, 26(2): 621–633

[22] Ostwald W. de waele-ostwald equation. Kolloid Zeitschrift, 1929, 47(2): 176–187

[23] Moore F. The rheology of ceramic slip and bodies. Transactions of the British Ceramic Society, 1959, 58: 470–492

[24] Worrall W, Tuliani S. Viscosity changes during the aging of clay−water suspensions. Transactions of British Ceramic Society, 1964, 63: 167–185

[25] Toorman E A. An analytical solution for the velocity and shear rate distribution of non- ideal Bingham fluids in concentric cylinder viscometers. Rheologica Acta, 1994, 33(3): 193–202

[26] Pinder K L. Time dependent rheology of the tetrahydrofuran-hydrogen sulphide gas hydrate slurry. Canadian Journal of Chemical Engineering, 1964, 42(3): 132–138

[27] Lee K H, Brodkey R S. Time-dependent polymer rheology under constant stress and under constant shear conditions. Transactions of the Society of Rheology, 1971, 15(4): 627–646

[28] Yziquel F, Carreau P, Moan M, Tanguy P. Rheological modeling of concentrated colloidal suspensions. Journal of Non-Newtonian Fluid Mechanics, 1999, 86(1–2): 133–155

[29] Mujumdar A, Beris A N, Metzner A B. Transient phenomena in thixotropic systems. Journal of Non-Newtonian Fluid Mechanics, 2002, 102(2): 157–178

[30] Dullaert K, Mewis J. A structural kinetics model for thixotropy. Journal of Non-Newtonian Fluid Mechanics, 2006, 139(1–2): 21–30

[31] Roussel N. A thixotropy model for fresh fluid concretes: Theory, validation and applications. Cement and Concrete Research, 2006, 36(10): 1797–1806

[32] Mechtcherine V, Bos F P, Perrot A, da Silva W L, Nerella V, Fataei S, Wolfs R J, Sonebi M, Roussel N. Extrusion-based additive manufacturing with cement-based materials-production steps, processes, and their underlying physics: A review. Cement and Concrete Research, 2020, 132: 106037

[33] Reiter L, Wangler T, Roussel N, Flatt R J. The role of early age structural build-up in digital fabrication with concrete. Cement and Concrete Research, 2018, 112: 86–95

[34] Ranjbar N, Mehrali M, Kuenzel C, Gundlach C, Pedersen D B, Dolatshahi-Pirouz A, Spangenberg J. Rheological characterization of 3D printable geopolymers. Cement and Concrete Research, 2021, 147: 106498

[35] Mewis J. Thixotropy—A general review. Journal of Non-Newtonian Fluid Mechanics, 1979, 6(1): 1–20

[36] Yim H J, Kim J H, Shah S P. Cement particle flocculation and breakage monitoring under couette flow. Cement and Concrete Research, 2013, 53: 36–43

[37] JiaoD, Yardimci M Y,LesageK,de SchutterG. Active Rheology Control of Ce-Mentitious Materials with Responsive Mineral Particles. Boca Raton: CRC Press, 2023

[38] Roussel N, Bessaies-Bey H, Kawashima S, Marchon D, Vasilic K, Wolfs R. Recent advances on yield stress and elasticity of fresh cement-based materials. Cement and Concrete Research, 2019, 124: 105798

[39] Wang D, Zhang Y, Xiao J, Huang T, Wu M, Zuo S, Yang Y. Structural kinetics constitutive models for characterizing the time-dependent rheologic behaviors of fresh cement paste. Construction and Building Materials, 2021, 276: 122175

[40] Yim H J, Kim J H. Physical characterization of cementitious materials on casting and placing process. Materials, 2014, 7(4): 3049–3064

[41] Nerella V, Beigh M, Fataei S, Mechtcherine V. Strain-based approach for measuring structural build-up of cement pastes in the context of digital construction. Cement and Concrete Research, 2019, 115: 530–544

[42] Bernard O, Ulm F J, Lemarchand E. A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials. Cement and Concrete Research, 2003, 33(9): 1293–1309

[43] Meinhard K, Lackner R. Multi-phase hydration model for prediction of hydration-heat release of blended cements. Cement and Concrete Research, 2008, 38(6): 794–802

[44] Qian Y, Kawashima S. Use of creep recovery protocol to measure static yield stress and structural rebuilding of fresh cement pastes. Cement and Concrete Research, 2016, 90: 73–79

[45] Huang H, Huang T, Yuan Q, Zhou D, Deng D, Zhang L. Temperature dependence of structural build-up and its relation with hydration kinetics of cement paste. Construction and Building Materials, 2019, 201: 553–562

[46] Panda B, Tan M J. Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application. Materials Letters, 2019, 237: 348–351

[47] Mostafa A M, Yahia A. New approach to assess build-up of cement-based suspensions. Cement and Concrete Research, 2016, 85: 174–182

[48] Meng W, Kumar A, Khayat K H. Effect of silica fume and slump-retaining polycarboxylate-based dispersant on the development of properties of portland cement paste. Cement and Concrete Composites, 2019, 99: 181–190

[49] Dittrich S, Neubauer J, Goetz-Neunhoeffer F. The influence of fly ash on the hydration of OPC within the first 44 h—A quantitative in situ XRD and heat flow calorimetry study. Cement and Concrete Research, 2014, 56: 129–138

[50] Scrivener K L, Juilland P, Monteiro P J. Advances in understanding hydration of Portland cement. Cement and Concrete Research, 2015, 78: 38–56

[51] Deir E, Gebregziabiher B S, Peethamparan S. Influence of starting material on the early age hydration kinetics, microstructure and composition of binding gel in alkali activated binder systems. Cement and Concrete Composites, 2014, 48: 108–117

[52] RavichandranD, Giridhar G, Kumar RamamurthyV, PremP R. Influence of test protocol on determining the rheological properties of cement pastes mixtures for concrete 3D printing. Materials Today: Proceedings, 2023 (in press)

[53] GiridharG, PremP R, JiaoD. Effect of varying shear rates at different resting times on the rheology of 3D printable concrete. Materials Today: Proceedings, 2023 (in press)

RIGHTS & PERMISSIONS

Higher Education Press