Concrete corrosion in wastewater systems: Prediction and sensitivity analysis using advanced extreme learning machine

Abstract

The implementation of novel machine learning models can contribute remarkably to simulating the degradation of concrete due to environmental factors. This study considers the sulfuric acid corrosive factor in wastewater systems to simulate concrete mass loss using five machine learning models. The models include three different types of extreme learning machines, including the standard, online sequential, and kernel extreme learning machines, in addition to the artificial neural network, classification and regression tree model, and statistical multiple linear regression model. The reported values of concrete mass loss for six different types of concrete are the target values of the machine learning models. The input variability was assessed based on two scenarios prior to the application of the predictive models. For the first assessment, the machine learning models were developed using all the available cement and concrete mixture input variables; the second assessment was conducted based on the gamma test approach, which is a sensitivity analysis technique. Subsequently, the sensitivity analysis of the most effective parameters for concrete corrosion was tested using three different approaches. The adopted methodology attained optimistic and reliable modeling results. The online sequential extreme learning machine model demonstrated superior performance over the other investigated models in predicting the concrete mass loss of different types of concrete.

Graphical abstract

Keywords

sewer systems / environmental engineering / data-driven methods / sensitivity analysis

References

[1] Panepinto D, Fiore S, Genon G, Acri M. Thermal valorization of sewer sludge: Perspectives for large wastewater treatment plants. Journal of Cleaner Production, 2016, 137(1): 1323–1329

[2] De Muynck W, De Belie N, Verstraete W. Effectiveness of admixtures, surface treatments and antimicrobial compounds against biogenic sulfuric acid corrosion of concrete. Cement and Concrete Composites, 2009, 31(3): 163–170

[3] Navarro I J, Yepes V, Martí J V, González-Vidosa F. Life cycle impact assessment of corrosion preventive designs applied to prestressed concrete bridge decks. Journal of Cleaner Production, 2018, 196(1): 698–713

[4] Sadowski L. Non-destructive investigation of corrosion current density in steel reinforced concrete by artificial neural networks. Archives of Civil and Mechanical Engineering, 2013, 13(1): 104–111

[5] Alani A M, Faramarzi A. An evolutionary approach to modelling concrete degradation due to sulphuric acid attack. Applied Soft Computing, 2014, 24(1): 985–993

[6] Jiang G, Keller J, Bond P L, Yuan Z. Predicting concrete corrosion of sewers using artificial neural network. Water Research, 2016, 92: 52–60

[7] Xu F, Xiao Y, Wang S, Li W, Liu W, Du D. Numerical model for corrosion rate of steel reinforcement in cracked reinforced concrete structure. Construction and Building Materials, 2018, 180(1): 55–67

[8] Qian C, Kang W, Ling H, Dong H, Liang C, Chen H. Combination of support vector machine and K-Fold cross-validation for prediction of long-term degradation of the compressive strength of marine concrete. International Journal of Computational Physics Series, 2018, 206(1): 355–363

[9] Li X, Khademi F, Liu Y, Akbari M, Wang C, Bond P L, Keller J, Jiang G. Evaluation of data-driven models for predicting the service life of concrete sewer pipes subjected to corrosion. Journal of Environmental Management, 2019, 234(1): 431–439

[10] Talaiekhozani A, Bagheri M, Goli A, Talaei Khoozani M R. An overview of principles of odor production, emission, and control methods in wastewater collection and treatment systems. Journal of Environmental Management, 2016, 170(1): 186–206

[11] Zhang W, Yao X, Yang T, Zhang Z. The degradation mechanisms of alkali-activated fly ash/slag blend cements exposed to sulphuric acid. Construction & Building Materials, 2018, 186(1): 1177–1187

[12] Roghanian N, Banthia N. Development of a sustainable coating and repair material to prevent bio-corrosion in concrete sewer and waste-water pipes. Cement and Concrete Composites, 2019, 100(1): 99–107

[13] Grengg C, Mittermayr F, Ukrainczyk N, Koraimann G, Kienesberger S, Dietzel M. Advances in concrete materials for sewer systems affected by microbial induced concrete corrosion: A review. Water Research, 2018, 134(1): 341–352

[14] Yang Y, Ji T, Lin X, Chen C, Yang Z. Biogenic sulfuric acid corrosion resistance of new artificial reef concrete. Construction & Building Materials, 2018, 158(1): 33–41

[15] Ramezanianpour A A, Zolfagharnasab A, Zadeh F B, Estahbanati S H, Boushehri R, Pourebrahimi M R, Ramezanianpour A M. Effect of supplementary cementing materials on concrete resistance against sulfuric acid attack. High Tech Concrete: Where Technology and Engineering Meet, 2018, 12(3): 2290–2298

[16] Zhang W, Song Z. Prediction of concrete corrosion in sulfuric acid by SVM-based method. In: Proceedings of the 2nd International Conference on Electronic and Mechanical Engineering and Information Technology. Paris: Atlantis Press, 2012

[17] Hewayde E, Nehdi M, Allouche E, Nakhla G. Neural network prediction of concrete degradation by sulphuric acid attack. Structure and Infrastructure Engineering, 2007, 3(1): 17–27

[18] Taffese W Z, Sistonen E. Machine learning for durability and service-life assessment of reinforced concrete structures: Recent advances and future directions. Automation in Construction, 2017, 77(1): 1–14

[19] Buenfeld N R, Hassanein N M. Predicting the life of concrete structures using neural networks. In: Proceedings of the Institution of Civil Engineers: Structures and Buildings. London: ICE publishing, 1998, 128

[20] Anoop M B, Rao K B, Rao T V S R A. Application of fuzzy sets for estimating service life of reinforced concrete structural members in corrosive environments. Engineering Structures, 2002, 24(9): 1229–1242

[21] Sobhani J, Ramezanianpour A A. Service life of the reinforced concrete bridge deck in corrosive environments: A soft computing system. Applied Soft Computing, 2011, 11(4): 3333–3346

[22] Zounemat-Kermani M, Stephan D, Barjenbruch M, Hinkelmann R. Ensemble data mining modeling in corrosion of concrete sewer: A comparative study of network-based (MLPNN & RBFNN) and tree-based (RF, CHAID, & CART) models. Advanced Engineering Informatics, 2020, 43(1): 101030

[23] Alwanas A A H, Al-Musawi A A, Salih S Q, Tao H, Ali M, Yaseen Z M. Load-carrying capacity and mode failure simulation of beam-column joint connection: Application of self-tuning machine learning model. Engineering Structures, 2019, 194(1): 220–229

[24] Yaseen Z M, Afan H A, Tran M T. Beam-column joint shear prediction using hybridized deep learning neural network with genetic algorithm. In: IOP Conference Series: Earth and Environmental Science. Ho Chi Minh City: IOP Publishing, 2018

[25] Al-Musawi A A, Alwanas A A H, Salih S Q, Ali Z H, Tran M T, Yaseen Z M. Shear strength of SFRCB without stirrups simulation: Implementation of hybrid artificial intelligence model. Engineering with Computers, 2020, 36(1): 1–11

[26] Yaseen Z M, Tran M T, Kim S, Bakhshpoori T, Deo R C. Shear strength prediction of steel fiber reinforced concrete beam using hybrid intelligence models: A new approach. Engineering Structures, 2018, 177(1): 244–255

[27] Yaseen Z M, Deo R C, Hilal A, Abd A M, Bueno L C, Salcedo-Sanz S, Nehdi M L. Predicting compressive strength of lightweight foamed concrete using extreme learning machine model. Advances in Engineering Software, 2018, 115(1): 112–125

[28] Keshtegar B, Bagheri M, Yaseen Z M. Shear strength of steel fiber-unconfined reinforced concrete beam simulation: Application of novel intelligent model. Composite Structures, 2019, 212(1): 230–242

[29] Huang G B, Zhu Q Y, Siew C K. Extreme learning machine: Theory and applications. Neurocomputing, 2006, 70(1–3): 489–501

[30] Huang G, Huang G B, Song S, You K. Trends in extreme learning machines: A review. Neural Networks, 2015, 61(1): 32–48

[31] Heddam S, Kisi O. Extreme learning machines: A new approach for modeling dissolved oxygen (DO) concentration with and without water quality variables as predictors. Environmental Science and Pollution Research International, 2017, 24(20): 16702–16724

[32] Alizamir M, Kisi O, Zounemat-Kermani M. Modelling long-term groundwater fluctuations by extreme learning machine using hydro-climatic data. Hydrological Sciences Journal, 2018, 63(1): 63–73

[33] Sebbar A, Heddam S, Djemili L. Predicting daily pan evaporation (Epan) from dam reservoirs in the Mediterranean regions of Algeria: OPELM vs OSELM. Environmental Processes, 2019, 6(1): 309–319

[34] Lima A R, Hsieh W W, Cannon A J. Variable complexity online sequential extreme learning machine, with applications to streamflow prediction. Journal of Hydrology (Amsterdam), 2017, 555(1): 983–994

[35] Zhu S, Heddam S. Modelling of maximum daily water temperature for streams: Optimally pruned extreme learning machine (OPELM) versus radial basis function neural networks (RBFNN). Environmental Processes, 2019, 6(3): 789–804

[36] Yaseen Z M, Sulaiman S O, Deo R C, Chau K W. An enhanced extreme learning machine model for river flow forecasting: State-of-the-art, practical applications in water resource engineering area and future research direction. Journal of Hydrology (Amsterdam), 2019, 569(1): 387–408

[37] Heddam S. Use of optimally pruned extreme learning machine (OP-ELM) in forecasting dissolved oxygen concentration (DO) several hours in advance: A case study from the Klamath River, Oregon, USA. Environmental Processes, 2016, 3(4): 909–937

[38] Huang G B, Chen L. Enhanced random search based incremental extreme learning machine. Neurocomputing, 2008, 71(16–18): 3460–3468

[39] Alizamir M, Kisi O, Zounemat-Kermani M. Modelling long-term groundwater fluctuations by extreme learning machine using hydro-climatic data. Hydrological Sciences Journal, 2018, 63(1): 63–73

[40] Huang G B, Chen L. Convex incremental extreme learning machine. Neurocomputing, 2007, 70(16–18): 3056–3062

[41] Hou M, Zhang T, Weng F, Ali M, Al-Ansari N, Yaseen Z. Global solar radiation prediction using hybrid online sequential extreme learning machine model. Energies, 2018, 11(12): 3415–3443

[42] Mayne A J, Rao C R, Mitra S K. Generalized inverse of matrices and its applications. Operational Research Quarterly (1970–1977), 1972, 23(4): 598

[43] Huang G B, Zhou H, Ding X, Zhang R. Extreme learning machine for regression and multiclass classification. IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics), 2012, 42(2): 513–529

[44] Mercer J. Functions of positive and negative type and their connection with the theory of integral equations. Philosophical Transaction of the Royal Society of London, 1909, 209: 4–415

[45] Wang B, Huang S, Qiu J, Liu Y, Wang G. Parallel online sequential extreme learning machine based on MapReduce. Neurocomputing, 2015, 149: 224–232

[46] Liang N Y, Huang G B, Saratchandran P, Sundararajan N. A fast and accurate online sequential learning algorithm for feedforward networks. IEEE Transactions on Neural Network, 2006, 17(6): 1411–1423

[47] Breiman L. Classification and Regression Trees. Monterey, CA: Wadsworth and Brooks/Cole, 1984

[48] Moisen G G. Classification and regression trees. Encyclopedia of Ecology, 2008, 1: 582–588

[49] Loh W Y. Classification and regression trees. WIREs Data Mining and Knowledge Discovery, 2011, 1(1): 14–23

[50] Strobl C, Malley J, Tutz G. An Introduction to recursive partitioning: Rationale, application, and characteristics of classification and regression trees, bagging, and random forests. Psychological Methods, 2009, 14(4): 323–348

[51] Timofeev R. Classification and Regression Trees (CART) Theory and Applications. Berlin: Humboldt University, 2004

[52] Ngai E W T, Xiu L, Chau D C K. Application of data mining techniques in customer relationship management: A literature review and classification. Expert Systems with Applications, 2009, 36(2): 2592–2602

[53] Chou J S, Tsai C F, Pham A D, Lu Y H. Machine learning in concrete strength simulations: Multi-nation data analytics. Construction & Building Materials, 2014, 73(1): 771–780

[54] Haykin S. Neural Networks—A Comprehensive Foundation. 2nd ed. London: Prentice-Hall, Inc., 1999, 26–32

[55] Walczak S. Artificial neural networks. In: Advanced Methodologies and Technologies in Artificial Intelligence, Computer Simulation, and Human-Computer Interaction. Pennsylvania: IGI Global, 2019, 40–53

[56] Adeli H. Neural networks in civil engineering: 1989–2000. Computer-Aided Civil and Infrastructure Engineering, 2001, 16(2): 126–142

[57] Zounemat-Kermani M. Investigating chaos and nonlinear forecasting in short term and mid-term river discharge. Water Resources Management, 2016, 30(5): 1851–1865

[58] Yaseen Z M, Deo R C, Hilal A, Abd A M, Bueno L C, Salcedo-Sanz S, Nehdi M L. Predicting compressive strength of lightweight foamed concrete using extreme learning machine model. Advances in Engineering Software, 2018, 115(1): 112–125

[59] Yegnanarayana B. Artificial Neural Networks. Sadhana: PHI Learning Pvt. Ltd., 2009

[60] Zounemat-Kermani M, Beheshti A A, Ataie-Ashtiani B, Sabbagh-Yazdi S R. Estimation of current-induced scour depth around pile groups using neural network and adaptive neuro-fuzzy inference system. Applied Soft Computing, 2009, 9(2): 746–755

[61] Stefánsson A, Končar N, Jones A J. A note on the gamma test. Neural Computing & Applications, 1997, 5(3): 131–133

[62] Durrant P J. winGamma: A non-linear data analysis and modelling tool with applications to flood prediction. Dissertation for the Doctoral Degree. Wales: Cardiff University, 2001

[63] Noori R, Karbassi A R, Moghaddamnia A, Han D, Zokaei-Ashtiani M H, Farokhnia A, Gousheh M. Assessment of input variables determination on the SVM model performance using PCA, Gamma test, and forward selection techniques for monthly stream flow prediction. Journal of Hydrology (Amsterdam), 2011, 401(3–4): 177–189

[64] Noori R, Deng Z, Kiaghadi A, Kachoosangi F T. How reliable are ANN, ANFIS, and SVM techniques for predicting longitudinal dispersion coefficient in natural rivers? Journal of Hydraulic Engineering, 2016, 142(1): 04015039

[65] Osborn T J, Wallace C J, Harris I C, Melvin T M. Pattern scaling using ClimGen: Monthly-resolution future climate scenarios including changes in the variability of precipitation. Climatic Change, 2016, 134(3): 353–369

[66] Noori R, Karbassi A, Salman Sabahi M. Evaluation of PCA and Gamma test techniques on ANN operation for weekly solid waste prediction. Journal of Environmental Management, 2010, 91(3): 767–771

[67] Abdelmseeh V A, Jofriet J C, Negi S C, Hayward G L. Corrosion of reinforced concrete specimens exposed to hydrogen sulfide and sodium sulfate. Agricultural Engineering International: CIGR Journal, 2005, 7: BC 03 013

[68] Abdelmseeh V A, Jofriet J C, Negi S C, Hayward G. Sulphide, sulphate and sulphuric acid a corrosion of concrete in laboratory tests. In: Advances in Engineering Structures, Mechanics & Construction. Dordrecht: Springer, 2006, 55–65

[69] Wells T, Melchers R E. Modelling concrete deterioration in sewers using theory and field observations. Cement and Concrete Research, 2015, 77(1): 82–96

[70] Legates D R, McCabe G J Jr. Evaluating the use of “goodness-of-fit” measures in hydrologic and hydroclimatic model validation. Water Resources Research, 1999, 35(1): 233–241

[71] Chai T, Draxler R R. Root mean square error (RMSE) or mean absolute error (MAE)?—Arguments against avoiding RMSE in the literature. Geoscientific Model Development, 2014, 7(3): 1247–1250

[72] Dawson C W, Wilby R L. Hydrological modelling using artificial neural networks. Progress in Physical Geography, 2001, 25(1): 80–108

[73] Krause P, Boyle D P, Bäse F. Comparison of different efficiency criteria for hydrological model assessment. Advances in Geosciences, 2005, 5(1): 89–97

[74] Baklacioglu T, Turan O, Aydin H. Metaheuristic approach for an artificial neural network: Exergetic sustainability and environmental effect of a business aircraft. Transportation Research Part D, Transport and Environment, 2018, 63(1): 445–465

[75] Ravansalar M, Rajaee T, Ergil M. Prediction of dissolved oxygen in River Calder by noise elimination time series using wavelet transform. Journal of Experimental & Theoretical Artificial Intelligence, 2016, 28(4): 689–706

[76] Taylor K E. Summarizing multiple aspects of model performance in a single diagram. Journal of Geophysical Research, D, Atmospheres, 2001, 106(D7): 7183–7192

[77] Behbahani H, Amiri A M, Imaninasab R, Alizamir M. Forecasting accident frequency of an urban road network: A comparison of four artificial neural network techniques. Journal of Forecasting, 2018, 37(7): 767–780

[78] Vu-Bac N, Lahmer T, Keitel H, Zhao J, Zhuang X, Rabczuk T. Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations. Mechanics of Materials, 2014, 68(1): 70–84

[79] Vu-Bac N, Lahmer T, Zhuang X, Nguyen-Thoi T, Rabczuk T. A software framework for probabilistic sensitivity analysis for computationally expensive models. Advances in Engineering Software, 2016, 100(1): 19–31

[80] Hamdia K M, Rabczuk T. Key parameters for fracture toughness of particle/polymer nanocomposites: Sensitivity analysis via XFEM modeling approach. In: Proceedings of the 7th International Conference on Fracture Fatigue and Wear. Singapore: Springer, 2019, 41–51

[81] Liu B, Vu-Bac N, Zhuang X, Rabczuk T. Stochastic multiscale modeling of heat conductivity of Polymeric clay nanocomposites. Mechanics of Materials, 2020, 142(1): 103280

[82] Monteny J, De Belie N, Taerwe L. Resistance of different types of concrete mixtures to sulfuric acid. Materials and Structures/Materiaux et Constructions, 2003, 36(4): 242–249

[83] Hamdia K M, Ghasemi H, Bazi Y, AlHichri H, Alajlan N, Rabczuk T. A novel deep learning based method for the computational material design of flexoelectric nanostructures with topology optimization. Finite Elements in Analysis and Design, 2019, 165(1): 21–30

[84] Guo H, Zhuang X, Rabczuk T. A deep collocation method for the bending analysis of Kirchhoff plate. Computers, Materials & Continua, 2019, 59(2): 433–456

[85] Anitescu C, Atroshchenko E, Alajlan N, Rabczuk T. Artificial neural network methods for the solution of second order boundary value problems. Computers, Materials & Continua, 2019, 59(1): 345–359

[86] Nguyen-Thanh V M, Zhuang X, Rabczuk T. A deep energy method for finite deformation hyperelasticity. European Journal of Mechanics. A, Solids, 2020, 80(1): 103874

RIGHTS & PERMISSIONS

Higher Education Press