Design and construction of super-long span bridges in China: Review and future perspectives

Abstract

Super-long span bridges demand high design requirements and involve many difficulties when constructed, which is an important indicator to reflect the bridge technical level of a country. Over the past three decades, a large percentage of the new long-span bridges around the world were built in China, and thus, abundant technological innovations and experience have been accumulated during the design and construction. This paper aims to review and summarize the design and construction practices of the superstructure, the substructure, and the steel deck paving of the long-span bridges during the past decades as well as the current operation status of the existing long-span bridges in China. A future perspective was given on the developing trend of high-speed railway bridge, bridge over deep-sea, health monitoring and maintenance, intellectualization, standard system, and information technology, which is expected to guide the development direction for the construction of future super long-span bridges and promote China to become a strong bridge construction country.

Keywords

long-span bridges / steel box girder / design technology / construction technology / review and future perspectives

References

[1] Pan R. Achievements, quality and safety of major public facilities and infrastructure projects in China. Hubei Education: Leadership. Science Forum, 2018, 6(4): 51–60 (in Chinese)

[2] Gao Z Y, Mei X Y, Xu W, Zhang Y F. Overall design of Hutong Yangtze River Bridge. Bridge Construction, 2015, 45(6): 1–6 (in Chinese)

[3] Hu M Y, Huang B S, Yu J L. Key Techniques for design of Edong Yangze River Highway Bridge. Bridge Construction, 2011, (5): 64–68 (in Chinese)

[4] Shen W. Review of construction of sea-crossing bridge in Zhoushan continental island connecting project. In: The 5th National Highway Science and Technology Innovation Forum. Beijing: China Highway Society, 2010 (in Chinese)

[5] Liu J S, Zhang Q H, Li Y T, Kang H. Summary of Xiamen Haicang Bridge west channel bridge project. Highway, 1999, 11: 1–4 (in Chinese)

[6] Ji L, Ruan J, Wang T. Key technology of 3-pylon 2-span suspension bridge of Taizhou Bridge. Journal of Highway and Transportation Research and Development, 2015, 32(02): 94–99 (in Chinese)

[7] Lin Y P, Zhang Z H, Ma B, Zhou L. Lupu Arch Bridge, Shanghai. China Civil Engineering Journal (New York), 2005, 1: 71–77 (in Chinese)

[8] Tang G W, Zheng W S, Zheng G, Gao W J. Dynamic model test of Chaotianmen Yangtze River Bridge in Chongqing. Highway, 2009, 5: 146–151 (in Chinese)

[9] Qin S Q. Nanjing Dashengguan Yangtze River Bridge. Democracy and Science, 2017, 2: 53 (in Chinese)

[10] Chen R L. The design and construction scheme of Beipanjiang Bridge on Shanghai-Kunming special passenger line. Sci-tech Information Development and Economy, 2011, 21(22): 175–179 (in Chinese)

[11] Editorial department of China Journal of Highway and Transport. Review on China bridge engineering research: 2014. China Journal of Highway and Transport, 2014, 27(5): 1–96 (in Chinese)

[12] Peng J X. Life-cycle cost-based bridge entire-life design method. Dissertation for the Doctoral Degree. Changsha: Hunan University, 2009 (in Chinese)

[13] Cao M J. The cantilever method of prestressed concrete continuous rigid frame bridge construction monitoring. Thesis for the Master’s Degree. Xi’an: Chang’an University, 2016 (in Chinese)

[14] Hao J X. Study on life cycle risk assessment and countermeasure of long-span cable-stayed bridge. Thesis for the Master’s Degree. Xi’an: Chang’an University, 2017 (in Chinese)

[15] Wu H J. Durability design approaches for bridge structures. Dissertation for the Doctoral Degree. Shanghai: Tongji University, 2006 (in Chinese)

[16] Hao W X. The research on bridge technological transformation and decision-making based on the life cycle cost. Thesis for the Master’s Degree. Xi’an: Chang’an University, 2008 (in Chinese)

[17] Zhang X G, Yuan H, Pei M S. Key design technology of SuTong Yangtze river highway bridge. Highway, 2009, 5: 6–10 (in Chinese)

[18] Zhu P J. Jiangyin Yangtze River Highway Bridge. Highway, 1998, 8: 6–9 (in Chinese)

[19] Wu W S, Wang R G, Wang Z F. Design of steel box girders of channel bridges of Hangzhou Bay Sea-crossing Bridge. Bridge Construction, 2006, 3: 24–26 (in Chinese)

[20] Song H, Wang X D. Overall design of Xihoumen Bridge in Zhoushan continental island connecting project. Highway, 2009, 1: 8–16 (in Chinese)

[21] Li L F. The analytical theory and model test research on local stability of orthotropic steel box girder. Dissertation for the Doctoral Degree. Changsha: Hunan University, 2005 (in Chinese)

[22] Xu L, Li P J, Cheng Y H. The manufacturing technology of steel box girder of Naning NO.4 Yangtze River suspension bridge. Steel Structure, 2013, 28(10): 55–59 (in Chinese)

[23] Wang R G, Meng F C, Wang Z F, Wu S W, Sun Q G. Overall design of Hangzhou Bay Sea-crossing Bridge. Highway, 2006, 9: 1–7 (in Chinese)

[24] Fang D D, Chen C. Girders for the cable-stayed bridge of Zhenjiang-Yangzhou Yangtze river highway bridge. Railway Standard Design, 2003, 3: 5–7 (in Chinese)

[25] Cheng L. Design and construction of steel tower and static nonlinear analysis of Nanjing Yangtze 3rd Bridge. Thesis for the Master’s Degree. Chengdu: Southwest Jiaotong University, 2005 (in Chinese)

[26] Zhang H W. Brief analysis on construction technology of cable tower of marine suspension bridge. In: The 21st National Bridge Academic Conference. China Civil Engineering Society. Dalian: China Communications Press, 2014 (in Chinese)

[27] Dai J. Design of cable tower of Sutong Bridge. In: 2004 National Bridge Academic Conference. Kunming: China Highway Society. 2004 (in Chinese)

[28] Wu S C. Review of new technology used in Sutong Bridge. In: Transformation of Economic Development Mode and Independent Innovation: The 12th Annual Conference of China Association of Science and Technology. Fuzhou: Academic Department of Chinese Association of Science and Technology, 2010 (in Chinese)

[29] Gao Z Y. Technical Characteristics of Main Bridge of Hutong Changjiang River Bridge. Bridge Construction, 2014, 44(2): 1–5 (in Chinese)

[30] Hong J. Analysis of key manufacturing techniques for steel pylon of large bridge. Steel Structure, 2018, 33(2): 89–92

[31] Chen G B, Wei H H, Huang T. Construction survey technology of the steel pylon of the Third Nanjing Yangtze River Bridge. Journal of Highway and Transportation Research and Development, 2008, 9: 73–80 (in Chinese)

[32] Zhang Y. Research on the structural characteristics of steel-concrete composite segment in the tower of the Third Nanjing Yangtze Bridge. Thesis for the Master’s Degree. Chengdu: Southwest Jiaotong University, 2005 (in Chinese)

[33] Dai S X. Hoisting construction for steel pillar of Taizhou Yangtze River Highway Bridge. China Harbour Engineering, 2011, 2: 51–54 (in Chinese)

[34] Han D Z, Ji L, Chen A R. Overview of key technology of middle pylon design of Taizhou Bridge. Highway, 2003, 2013(11): 72–77 (in Chinese)

[35] Zhao Q L, Chen B, Zhuo J T. Developments in mechanical analysis of suspension bridges’ anchorage and foundation. Advances in Science and Technology of Water Resources, 2001, 21(1): 22–26 (in Chinese)

[36] Lin R A. Analyzing and optimizing the bearing behaviors of gravity anchorage system for suspension bridge. Thesis for the Master’s Degree. Xi’an: Chang’an University, 2008 (in Chinese)

[37] Jiang Z Z. North anchorage diaphragm wall of south branch suspension bridge of Runyang Yangtze River Highway Bridge. In: National Geotechnical and Engineering Academic Conference. Beijing: China Rock Mechanics and Engineering Society, 2003 (in Chinese)

[38] Duan C J, Xu W, He C R. Construction technology of super-deep diaphragm wall of the forth Nanjing Yangtze river bridge. Construction Technology, 2010, 39(2): 39–42 (in Chinese)

[39] Zhang X G, Yuan H, Pei M S. Introduction of key technologies in design of Sutong Yangtze River Highway Bridge. Highway, 2009, 5: 6–10 (in Chinese)

[40] Huang L, Zhou W, Liu T. Research of construction scheme for caisson foundation of inter-mediate tower of Taizhou Yangtze River Highway Bridge. Bridge Construction, 2008, (2): 63–66 (in Chinese)

[41] Yu Y, Qiu Q, Wang L. Scheme of pressure boost and floating aid for steel open caisson of main ship channel bridge of Hutong Yangtze River Bridge. Bridge Construction, 2015, 45(06): 74–78 (in Chinese)

[42] Huang W, Zhang X C, Hu G W. New advance of theory and design on pavement for long-span steel bridge. Journal of Southeast University (Natural Science Edition), 2002, 3: 480–487

[43] Tong L W, Shen Z Y, Chen Z Y. Fatigue load spectrum for urban road bridge. China Civil Engineering Journal, 1997, 5: 20–27 (in Chinese)

[44] Li J, Ren G J, Dong Y. Effect of heavy vehicles on asphalt pavement fatigue life. Journal of Dalian Jiaotong University, 2017, 38(3): 92–95 (in Chinese)

[45] Zhao Y S. Optimum design of asphalt mixture proportion and performance verification. Journal of Highway and Transportation Research and Development (Applied Technology Edition), 2017, 13(10): 123–125

[46] Yao A L, Sun Z J, Wang Y D. The optimization design system for asphalt mixture grade. Journal of Xi’an Highway University, 2000, 2: 35–37 (in Chinese)

[47] Huang W, Liu Z Q, Qian Z D, Cheng G. Conversion method of axle-load for steel bridge deck based on fatigue-equivalent. Journal of Traffic and Transportation Engineering, 2005, 1: 14–18 (in Chinese)

[48] Nanjing Yangtze River Second Bridge Construction Command. Technology and Application of Epoxy Asphalt Concrete Pavement on Steel Deck of Nanjing Yangtze River Second Bridge. Nanjing: Southeast University, 2000 (in Chinese)

[49] Yu L, Chen H. Investigation and review of the 15-year service status of the first epoxy paved steel bridge of the Nanjing Yangtze River second bridge. Journal of Bridge, 2018 (in Chinese) (in press)

[50] Luo S, Qian Z D, Wang H. Condition survey and analysis of epoxy asphalt concrete pavement on Second Nanjing Yangtze River Bridge: A ten-year review. Journal of Southeast University (English Edition), 2011, 27(4): 417–422

[51] Nanjing Yangtze River Third Bridge Construction Command. Technology and application of epoxy asphalt concrete pavement on steel deck of Nanjing Yangtze River Third Bridge. Nanjing: Southeast University, 2005 (in Chinese)

[52] Xu H, Ling C. Design of deck pavement scheme for cement concrete bridge of Hangzhou bay bridge. Journal of China and Foreign Highway, 2008, 1: 68–72 (in Chinese)

[53] Chen L Y, Zhu Z B, Pan L Q, Li Z L. Construction technology and quality control of epoxy asphalt deck surfacing of Xihoumen Bridge. Bridge Construction, 2009, S2: 114–117 (in Chinese)

[54] Chen D J. Epoxy asphalt concrete pavement scheme and key links construction control for steel deck of Xihoumen Bridge. China Water Transport, 2012, 12(4): 202–205 (in Chinese)

[55] Jiang L. Applied research and development of epoxy asphalt. New Chemical Materials, 2010, 38(9): 34–36 (in Chinese)

[56] Huang W, Qian Z, Chen G, Yang J. Epoxy asphalt concrete paving on the deck of long-span steel bridges. Chinese Science Bulletin, 2003, 48(21): 2391–2394

[57] Huang W, Qian Z D, Cheng G. Application of epoxy asphalt concrete to pavement of long-span steel bridge deck. Journal of Southeast University (Natural Science Edition), 2002, 5: 783–787

[58] Zhang L, Wu S S, Huang W, Chen T J, Shen K J. Multi-scale model for the bridge deck-pavement dynamic analysis. China Journal of Highway and Transport, 2012, 25(3): 87–93 (in Chinese)

[59] Qian Z D, Huang W, Luo J W, Mao Q. Mechanical analysis of pavement of orthotropic steel deck. Journal of Traffic and Transportation Engineering, 2002, 3: 47–51 (in Chinese)

[60] Wang J W, Shen J L, Qian Z D. Construction controlling research of domestic epoxy asphalt mixture. Journal of Southeast University (Natural Science Edition), 2009, 39(6): 1226–1230

[61] Qian Z D, Luo S, Wang J W. Laboratory evaluation of epoxy resin modified asphalt mixtures. Journal of Southeast University (English Edition), 2007, 23(1): 117–121

[62] Pi Y H, Chen S Z. Application of casting asphalt concrete paving on bridge deck. Journal of China & Foreign Highway, 2006, 26(1): 155–158 (in Chinese)

[63] Hu D Y, Lv J G, Wang M, Hu X Y. Features and development trend of cast asphalt mixture. Journal of Highway and Tranportaion Research and Development, 2015, 6: 14–17 (in Chinese)

[64] Chen X H, Huang W, Li H T, Wu Y Y. Performance　of　Guss　asphalt　for　orthotropic　steel　deck　plate　surfacing. Journal of Highway and Transportation Research and Development, 2004, 21(9): 28–30 (in Chinese)

[65] Li H T, Huang W. Applications of Guss　Asphalt　for　bridge deck plate surfacing in Japan. East China Highway, 1999, 3: 39–42 (in Chinese)

[66] Liang Z T, Ding X J. Ming Shi Strait (Akashi Kaikyo) bridge deck paving. Foreign Highway, 1999, 19(6): 7–11 (in Chinese)

[67] Qian Z D, Luo J, Jing M M. Mechanical analysis of asphalt concrete paving projects on steel bridge deck. China Journal of Highway and Transport, 2005, 2: 61–64 (in Chinese)

[68] Qian Z D, Huang W, Luo J W, Mao Q. Mechanical analysis of pavement of orthotropic steel deck. Journal of Traffic and Transportation Engineering, 2002, 3: 47–51 (in Chinese)

[69] Huang W, Qian Z D, Cheng G, Yang J. Study on epoxy asphalt concrete pavement of long span steel bridge deck. Chinese Science Bulletin, 2002, 47(24): 1894–1897 (in Chinese)

[70] Huang W, Qian Z D. Theory and Design of High-grade Asphalt Pavement. Beijing: Science Press, 2001

[71] Liu Z Q. Key Technologies for Deck Pavement Design of Long-span Steel Bridge. Nanjing: Southeast University, 2004 (in Chinese)

[72] Zhoushan Taoyaomen Bridge Construction Command. Study on Steel Deck Pavement Technology of Zhoushan Taoyumen Bridge. Nanjing: Southeast University, 2003 (in Chinese)

[73] Pan S J, Yang S F. Construction of Xiamen Haicang Bridge. Beijing: China Communication Press, 2003 (in Chinese)

[74] Runyang Yangtze River Highway Bridge Construction Command. Research on Steel Deck Pavement Technology of Runyang Yangtze River Highway Bridge. Nanjing: Southeast University, 2004 (in Chinese)

[75] Cheng H, Liu L, Sun L. Critical response analysis of steel deck pavement based on viscoelastic finite element model. International Journal of Pavement Engineering, 2019 (in press)

[76] Luo S, Qian Z, Yang X, Lu Q. Laboratory evaluation of double-layered pavement structures for long-span steel bridge decks. Journal of Materials in Civil Engineering, 2018, 30(6): 04018111

[77] Huang H, Xu W, Zeng G. Study of the strain response of asphalt pavements on orthotropic steel bridge decks through field testing and numerical Simulation. Journal of Testing and Evaluation, 2018, 48(2): 1615–1633

[78] Wang X, Feng J, Wang H. Stress analysis of asphalt concrete deck pavement on steel bridge based on burgers model and interlayer contact. In: The 6th International Conference on Energy and Environmental Protection (ICEEP 2017). Zhuhai: Atlantis Press, 2017

[79] Geng L, Xu Q, Ren R, Wang L, Yang X, Wang X. Performance research of high-viscosity asphalt mixture as deck-paving materials for steel bridges. Road Materials and Pavement Design, 2017, 18(1): 208–220

[80] Kim T W, Baek J, Lee H J, Lee S Y. Effect of pavement design parameters on the behaviour of orthotropic steel bridge deck pavements under traffic loading. International Journal of Pavement Engineering, 2014, 15(5): 471–482

[81] Bocci E, Canestrari F. Analysis of structural compatibility at interface between asphalt concrete pavements and orthotropic steel deck surfaces. Transportation Research Record: Journal of the Transportation Research Board, 2012, 2293(1): 1–7

[82] Xiang H F, Ge Y J, Zhu L D, Chen A R, Lin Z X, Gu M. Modern Theory and Practice on Bridge Wind resistance. Beijing: China Communication Press, 2005

[83] Xiang H F. State of the art and prospect in studies of structural wind engineering. Journal of Vibration Engineering, 1997, 3: 12–17 (in Chinese)

[84] Lu G C, Zhang H F, Yang Y X, Ge Y J. Cross section aerodynamic optimization of steel box girder in Xihoumen Suspension Bridge preliminary design. Journal of Southwest Jiaotong University, 2005, 4: 473–477 (in Chinese)

[85] Yang Y, Ge Y, Xiang H. Flutter control effect and mechanism of central-slotting for long-span bridges. China Civil Engineering Journal, 2006, 39(7): 74–80 (in Chinese)

[86] Li J Z, Guan Z G. Performance-based seismic design for bridges. Engineering Mechanics, 2011, 28(S2): 24–30 (in Chinese)

[87] Ye A J, Liu W A, Wang B B. Dynamic interaction between high-rise pile cap foundation and bridge structure. Journal of Tongji University (Natural Science), 2007, 9: 1163–1168 (in Chinese)

[88] Wang Z Q, Hu S D, Fan L C. Research on viscous damper parameters of Donghai Bridge. China Journal of Highway and Transport, 2005, 3: 37–42 (in Chinese)

[89] Shi Y, Wang D S, Han J P. Displacement-based design method for bridge bents with buckling-restrained braces (BRBs). China Civil Engineering Journal, 2017, 50(7), 62–68 (in Chinese)

[90] Li J Z, Fan L C. Longitudinal seismic response and pounding effects of girder bridges with unconventional configurations. China Civil Engineering Journal, 2005, 1: 84–90 (in Chinese)

[91] Han Q, Jia Z L, He W L, Xiao Y M, Jia J F, Du X L. Seismic design method and its engineering application of self-centering double-column rocking bridge. China Journal of Highway and Transport, 2017, 30(12): 169–177 (in Chinese)

[92] Peng T B, Li J Z, Fan L C. Development and application of double spherical aseismic bearing. Journal of Tongji University (Natural Science), 2007, 2: 176–180

[93] Peng T B, Li J Z, Fan L C. Analysis of vertical displacement of double spherical aseismic bearing. Journal of Tongji University (Natural Science), 2007, 9: 1181–1185 (in Chinese)

[94] The Hong Kong-Zhuhai-Macao Bridge will be installed with the largest rubber isolation bearing to effectively resist the impact. Journal of China and Foreign Highway, 2013, 33(2): 197 (in Chinese)

[95] Han Q, Liu W, Du X, Qi L. Computational model and experimental validation of multi-spherical sliding friction isolation bearings. China Journal of Highway and Transport, 2012, 25(5): 82–88 (in Chinese)

[96] Fan L, Wang Z. Application of Seismic Isolation Technology for Bridges in China. Journal of Vibration Engineering, 1999, (2): 26–34 (in Chinese)

[97] Wang Z R, Wang C X, Zhuang Z Z, Sun Y L. Innovative points of excavation explosion for gravity tieback of Sidu River Extra-large Bridge. China Journal of Highway and Transport, 2005, S1: 239–240 (in Chinese)

[98] Ji W X. Study on Balinghe Bridge West Tunnel anchor construction technology. Journal of Guizhou University, 2011, 28(4): 118–121 (Natural Sciences)

[99] Bu K M, Yin K L, Gong W M. Post-grouting technique for piled foundation: Case history of Su-Tong Bridge. Rock and Soil Mechanics, 2008, 30(6): 1697–1700 (in Chinese)

[100] CCCC Second Highway Engineering Company. Construction Manual of Highway and Bridge-pier and Foundation. Beijing: China Communication Press, 2014 (in Chinese)

[101] Xu Q S, Niu Y Z, Shi H Q. Simulation and analysis of impact dynamic performance of steel reinforced concrete bridge piers. Highway, 2017, 62(6): 84–89 (in Chinese)

[102] Lei H J. Research on the key construction technology under extra-high pile of cable-stayed bridge. Thesis for the Master’s Degree. Chongqing: Chongqing Jiaotong University, 2010 (in Chinese)

[103] Wang B H. Elementary discussion on application of hydraulic climbing in construction of cable pylon. Urban Roads Bridges and Flood Control, 2010, 9: 248–251 (in Chinese)

[104] Zhao Z Z. The construction of concrete cable bent tower and design & computation of crossbeam bracing structure of the long-span bridge. Thesis for the Master’s Degree. Chongqing: Chongqing University, 2002

[105] Zhang J, Yang Y Q. Manufacturing technology of large span steel box girder with ultra-wide cross section. Industrial Construction, 2018, 48(S): 207–210 (in Chinese)

[106] Hong H. Hot-rolled U-ribs for bridges. China Highway, 2017, 21: 36 (in Chinese)

[107] Liu J Z. Automation technology for manufacturing steel box girder of Hong Kong-Zhuhai-Macao Bridge. Highway, 2018, 63(7): 105–111 (in Chinese)

[108] Han X Y. Manufacturing technology for orthotropic steel deck plates of Hong Kong-Zhuhai-Macao Bridge. Bridge Construction, 2015, 45(5): 105–111 (in Chinese)

[109] Gong B C. Application and research of PPWS construction key technologies for main cable of long-span suspension bridge. Journal of Guang Dong Communication Polytechnic, 2019, 18(3): 26–30 (in Chinese)

[110] Zhao K P, Chen S T. Key technologies of steel box girder construction of Xiamen-Zhangzhou Sea-crossing Bridge. Transportation Science and Technology, 2013, 2: 21–23 (in Chinese)

[111] Wang Y C. Improvement Ideas of Characteristics of the crane for Humen Suspension Bridge. South China Harbour Engineering, 1997, 1: 36–43 (in Chinese)

[112] Zhang H, Lou B C, Zhang H, Luo C, Zhang Y, You X. Sutong bridge construction and control technology of the superstructure. Engineering and Science, 2009, 11(3): 85–91 (in Chinese)

[113] Yin H M, Li X D, Guo J. Construction technology of cantilever casting with stayed knotting method in largespan reinforced concrete arch bridge. Construction Technology, 2016, 45(4): 127–132 (in Chinese)

[114] Zheng J L, Wang J J, Feng Z, Han Y, Qin D Y. Vacuum aided concrete grouting process test of concrete filled steel tube arch segment. China Journal of Highway and Transport, 2014, 27(6): 44–50 (in Chinese)

[115] Liu Z. AEMM method with recurrence relation in analysis of creep and shrinkage. Journal of Chongqing Jiaotong Institute, 1994, S1: 31–34 (in Chinese)

[116] Zhou Y X, Gu A B. Creep-shrinkage time-dependent analysis of large span reinforced concrete arches of stiffen framework. Journal of Chongqing Jiaotong Institute, 1996, 15(1): 1–10 (in Chinese)

[117] Xie B Z. Design and construction technology of super-long span (420 m) concrete arch bridge of Wanxian Yangtze River Bridge. In: The 1st National Highway Science and Technology Innovation Forum. Beijing: Foreign Languages Press, 2002 (in Chinese)

[118] He L X, Liu S Z. Installation design and control of rigid skeleton of Wanxian Yangtze River Bridge. Southwest Highway, 1997, 1: 9–15 (in Chinese)

[119] Wong Y R, Li Y Q. Balanced casting technology for multi-face of super-long span SRC arch bridge. In: China Highway Society Academic Meeting in 1997. Nanning, 1997 (in Chinese)

[120] Chen B C, Ye L. Analysis of survey and development of China’s concrete arch bridge. Journal of China & Foreign Highway, 2008, 2(28): 89–96 (in Chinese)

[121] Cheng F, Zhang Q F, Wang J Q. Development status and prospect of swivel construction technology of bridges in China. Railway Standard Design, 2011, 6: 67–71 (in Chinese)

[122] Wang Z H, Fu Y, Chen Q, Chen B, Zhou L. Application and research advances in epoxy asphalt concrete serving at deck pavement material. Materials Review, 2018, 32(17): 2992–3009 (in Chinese)

[123] Cong P L, Yu X F, Lei Y, Wang J, Cui L. Study on performance of epoxy asphalt concrete bridge deck pavement. Journal of Highway and Transportation Research and Development, 2015, 5: 145–150 (in Chinese)

[124] Zhou J, Wei X H, Liu L, Tian J. Performance comparison of hot and warm mix epoxy asphalt concrete for steel deck pacement. Highway, 2018, 63(11): 1–7 (in Chinese)

[125] Huang H M, Zeng G D, Xu W, Li S, Zhou Z. Study of curing reaction mechanism and construction control performance of epoxy asphalt. Journal of Building Materials, 2019 (in Chinese) (in press)

[126] Zhu W. The application of epoxy asphalt in engineering practice. Soil Engineering and Foundation, 2006, 20(1): 33–35 (in Chinese)

[127] Zhu D, Li S L. Comparison of steel bridge deck pavement scheme selection and casting asphalt mixture (GMA) standardized construction process control of Hong Kong-Zhuhai-Macao Bridge. Journal of China & Foreign Highway, 2019, 2: 161–164 (in Chinese)

[128] Hu D Y, Lv J G, Wang M, Hu X. Features and development trend of cast asphalt mixture. Technology of Highway and Transport, 2015, 6: 14–17 (in Chinese)

[129] Wang M, Su Q K, Xu W, Li L, Lu H. The innovation and implementation of asphalt pavement for steel bridge deck of Hong Kong-Zhuhai-Macao Bridge. Journal of Engineering Studies, 2019, 1: 3–9 (in Chinese)

[130] Lu Y H. Quality control of steel deck for Hong Kong-Zhuhai-Macao Bridge. Construction Quality, 2018, 36(4): 23–28 (in Chinese)

[131] Fu D L, Qian Z D. Preventive maintenance countermeasure analysis of steel deck pavement. Highway, 2010, 1: 201–206 (in Chinese)

[132] Shen L J, Ge Z Q. Study on new repair and maintenance technology of asphalt pavement. Urban Roads Bridges and Flood Control, 2014, 6: 61–63 (in Chinese)

[133] Huang W, Zhang Z Q, Gao Z F, He L B, Xing N. Research and development of high-performance bridge steel at abroad. World Bridges, 2011, 2: 18–21 (in Chinese)

[134] Zhao Q, Wu C. Development and prospect of high-performance steel for bridges. China Municipal Engineering, 2007, S2: 64–67 (in Chinese)

[135] Wang W Q. Development and expectation of bridge engineering technology. Construction Technology, 2018, 47(6): 103–108 (in Chinese)

[136] Zhang Z Q, Gao Z F, Huang W, Chen F H, Ding W. Development and application of high-performance steel for bridge in South Korea. Progress in Steel Building Structures, 2016, 18(2): 61–66 (in Chinese)

[137] Zheng X L. Research on the fatigue performance of corroded steel wire and evaluation method of fatigue reliability for bridge cables. Hangzhou: Zhejiang University, 2018 (in Chinese)

[138] Wu C, Jiang C, Jiang X. Experiment research on fatigue performance of pre-corroded high-strength bridge wires. Journal of Tongji University (Natural Science), 2018, 46(12): 1622–1627 (in Chinese)

[139] Jiang C, Wu C, Jiang X. Experiment research on uniform corrosion and pitting corrosion of high-strength bridge wires. Journal of Tongji University (Natural Science), 2018, 46(12): 1615–1621 (in Chinese)

[140] Ma Y F, Chen Z C, Ye J, Wang L, Zhang J R. Experiment and numerical study on fatigue crack growth of bridge suspender. Journal of Disaster Prevention and Mitigation Engineering, 2019, 39(1): 23–30 (in Chinese)

[141] Liu T, Cheng Q, Wang X, Liu G, Zhong R. Multi-source Information Incorporation Technology and System Development of Pingtang Major Bridge based on BIM. Highway, 2019, 64(9): 12–17 (in Chinese)

[142] Hu F J. Research on modeling method to bridge BIM model in design phase. China Municipal Engineering, 2018, 5: 56–59 (in Chinese)

[143] Cong J L, Jiang M M, Yan Y G. The application of BIM Technology in bridge construction stage. Low Temperature Architecture Technology, 2018, 40(8): 120–128 (in Chinese)

[144] Liu Z M, Wang Y, Sun J, Jia Y J, Gao R. Application study on BIM technology in bridge design stage. Journal of Beijing Jiaotong University, 2015, 39(6): 80–84 (in Chinese)

[145] Zhang L. Research on the intelligent synchronous incremental launching method for skewed and trapezoidal steel box girders of Luojiagou Bridge. Bridge Engineering, 2017, (11): 72–83 (in Chinese)

[146] Dong X, Zhang Y, Xu H, Ni Y. Structural health monitoring and safety evaluation system for Sutong Bridge. Bridge Construction, 2006, 4: 71–81 (in Chinese)

[147] Zhang Y, Qian G. Application of cloud platform for health monitoring system in bridge. Computer Knowledge and Technology, 2015, 11(30): 206–208 (in Chinese)

[148] Zhang X G, Liu G, Ma H J, Wu H B, Fu B Y, Gao Y. Status and prospect of technical development for bridges in China. Chinese Science Bulletin, 2016, 61(4–5): 415–425

[149] Cai M. Structural health monitoring system of long-span bridge. Urban Roads Bridges and Flood Control, 2019, 2: 58–84

[150] Li H, Zhou W S, Ou J P, Yang Y S. A study on system integration technique of intelligent monitoring systems for soundness of long span bridges. China Civil Engineering Journal, 2006, 2: 46–52

[151] Li A Q, Ding Y L, Wang H, Guo T. Massive data analysis and assessment of bridge health monitoring—Research progress of structural health monitoring. Science in China: Technical Science, 2012, 42(8): 972–984

[152] JTG/T 7D65-05-2015. Specifications for Design of Highway Suspension Bridge. Beijing: China Communications Press, 2015

[153] JTG/T 7D65-01-2007. Specifications for Design of Highway Cable-stayed Bridge. Beijing: China Communications Press, 2017

[154] Hu C. Study on the Static and Dynamic Properties of Long-span Road-rail suspension Bridge. Beijing: Beijing Jiaotong University, 2016

[155] Liang Z Y, Li J Z. Research on damper parameters of long-span rail-cum-road cable-stayed bridge. Journal of Tongji University (Natural Science), 2007, 6: 728–733 (in Chinese)

[156] Li Y L, Bao Y L, Dong S F, Zeng Y P, Xiang H Y. Influencing factors of impact coefficient for long-span railway cable-stayed bridges. Journal of Vibration and Shock, 2015, 34(19): 138–143

[157] Qian Z D, Liu Y, Zheng B. Mechanical analysis of steel deck pavement on long span combined road and railway cable-stayed bridges. China Civil Engineering Journal, 2011, 44(6): 138–142

[158] Sun N, Zhou H Y, Chen Y P, Meng Y. Simulation of vibration control for long-span railway cable-stayed bridge based on suspended system. Journal of Natural Disaster, 1995, S1: 189–196 (in Chinese)

[159] Ma K Q, Wang Z P. Research on aseismic performance of large span cable stayed railway bridge. Railway Standard Design, 2005, 4: 47–52

[160] Lv L, Xue X Q. Influence of train braking force on seismic response of long-span railway cable-stayed bridges. Earthquake Engineering and Engineering Dynamics, 2018, 38(4): 180–185

[161] Lv L, Li J Z. Longitudinal resonance mechanism of a long-span cable-stayed railway bridge under moving loads. China Civil Engineering Journal, 2018, 51(2): 81–87

[162] Li Y L, Qiao Q F, Chen K J, Zeng Y P, Xiang H Y. Study of vehicle-induced longitudinal vibration and connection between pylon and girder of long span railway cable-stayed bridge. Bridge Construction, 2014, 44(2): 12–19

[163] Ding X N, Wang D L. Wing resistance study of the rail-cum-road suspension bridge with three towers. Highway, 2014, 59(6): 79–82

[164] Su Y G, Gao R, Chen L Y, Zeng X G. Free vibration analysis of long-span suspension bridge. Journal of Railway Engineering Society, 2002, 3: 42–47

RIGHTS & PERMISSIONS

Higher Education Press