Uncertainty quantification of stability and damage detection parameters of coupled hydrodynamic-ground motion in concrete gravity dams

Abstract

In this paper, models of the global system of the Koyna dam have been created using ABAQUS software considering the dam-reservoir-foundation interaction. Non coupled models and the coupled models were compared regarding the horizontal displacement of the dam crest and the differential settlement of the dam base in clay foundation. Meta models were constructed and uncertainty quantification process was adopted by the support of Sobol’s sensitivity indices considering five uncertain parameters by exploiting Box-Behnken experimental method. The non coupled models results determined overestimated predicted stability and damage detection in the dam. The rational effects of the reservoir height were very sensitive in the variation of the horizontal displacement of the dam crest with a small interaction effect with the beta viscous damping coefficient of the clay foundation. The modulus of elasticity of the clay foundation was the decisive parameter regarding the variation of the differential settlement of the dam base. The XFEM approach has been used for damage detection in relation with both minimum and maximum values of each uncertain parameter. Finally the effects of clay and rock foundations were determined regarding the resistance against the propagation of cracks in the dam, where the rock foundation was the best.

Keywords

massed foundation / hydrodynamic pressure / Box-Behnken method / meta model / Sobol’s sensitivity indices

References

[1] Ilinca C, Varvorea R, Popovici A. Influence of dynamic analysis methods on seismic response of a buttress dam. Mathematical Modelling in Civil Engineering, 2014, 10(3): 1–15

[2] Mohsin A Z, Omran HA, Al-Shukur A H K. Dynamic response of concrete gravity dam on random soil. International Journal of Civil Engineering and Technology, 2015, 6(11): 21–31

[3] Mehdipour B. Effect of foundation on seismic behavior of concrete dam considering the interaction of dam- Reservoir. Journal of Basic and Applied Scientific Research, 2013, 3(5): 13–20

[4] Wang G, Wang Y, Lu W, Zhou C, Chen M, Yan P. XFEM based seismic potential failure mode analysis of concrete gravity dam–water–foundation systems through incremental dynamic analysis. Engineering Structures, 2015, 98: 81–94

[5] Lu L, Li X, Zhou J, Chen G, Yun D. Numerical simulation of shock response and dynamic fracture of a concrete dam subjected to impact load. Earth Sciences Research Journal, 2016, 20(1): 1–6

[6] Huang J. Seismic Response Evaluation of Concrete Gravity Dams Subjected to Spatially Varying Earthquake Ground Motions. Dissertation for PhD degree. Drexel University, Philadelphia, USA, 2011

[7] Ghasemi H, Park H S, Rabczuk T. A level-set based IGA formulation for topology optimization of flexoelectric materials. Computer Methods in Applied Mechanics and Engineering, 2017, 313: 239–258

[8] Ghasemi H, Brighenti R, Zhuang X, Muthu J, Rabczuk T. Optimum fiber content and distribution in fiber-reinforced solids using a reliability and NURBS based sequential optimization approach. Structural and Multidisciplinary Optimization, 2015, 51(1): 99–112

[9] Zhang C, Nanthakumar S S, Lahmer T, Rabczuk T. Multiple cracks identification for piezoelectric structures. International Journal of Fracture, 2017, 206(2): 151–169

[10] Nanthakumar S, Zhuang X, Park H, Rabczuk T. Topology optimization of flexoelectric structures. Journal of the Mechanics and Physics of Solids, 2017, 105: 217–234

[11] Nanthakumar S, Lahmer T, Zhuang X, Park H S, Rabczuk T. Topology optimization of piezoelectric nanostructures. Journal of the Mechanics and Physics of Solids, 2016, 94: 316–335

[12] Nanthakumar S, Lahmer T, Zhuang X, Zi G, Rabczuk T. Detection of material interfaces using a regularized level set method in piezoelectric structures. Inverse Problems in Science and Engineering, 2016, 24(1): 153–176

[13] Nanthakumar S, Valizadeh N, Park H, Rabczuk T. Surface effects on shape and topology optimization of nanostructures. Computational Mechanics, 2015, 56(1): 97–112

[14] Nanthakumar S S, Lahmer T, Rabczuk T. Detection of flaws in piezoelectric structures using extended FEM. International Journal for Numerical Methods in Engineering, 2013, 96(6): 373–389

[15] Vu-Bac N, Lahmer T, Zhuang X, Nguyen-Thoi T, Rabczuk T. A software framework for probabilistic sensitivity analysis for computationally expensive models. Advances in Engineering Software, 2016, 100: 19–31

[16] Vu-Bac N, Silani M, Lahmer T, Zhuang X, Rabczuk T. A unified framework for stochastic predictions of mechanical properties of polymeric nanocomposites. Computational Materials Science, 2015, 96: 520–535

[17] Vu-Bac N, Rafiee R, Zhuang X, Lahmer T, Rabczuk T. Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters. Composites. Part B, Engineering, 2015, 68: 446–464

[18] Rabczuk T, Akkermann J, Eibl J. A numerical model for reinforced concrete structures. International Journal of Solids and Structures, 2005, 42(5-6): 1327–1354

[19] Bažant Z P. Why continuum damage is nonlocal: micromechanics arguments. Journal of Engineering Mechanics, 1991, 117(5): 1070–1087

[20] Thai T Q, Rabczuk T, Bazilevs Y, Meschke G. A higher-order stress-based gradient-enhanced damage model based on isogeometric analysis. Computer Methods in Applied Mechanics and Engineering, 2016, 304: 584–604

[21] Fleck N A, Hutchinson J W. A phenomenological theory for strain gradient effects in plasticity. Journal of the Mechanics and Physics of Solids, 1993, 41(12): 1825–1857

[22] Rabczuk T, Eibl J. Simulation of high velocity concrete fragmentation using SPH/MLSPH. International Journal for Numerical Methods in Engineering, 2003, 56(10): 1421–1444

[23] Rabczuk T, Eibl J, Stempniewski L. Numerical analysis of high speed concrete fragmentation using a meshfree Lagrangian method. Engineering Fracture Mechanics, 2004, 71(4–6): 547–556

[24] Rabczuk T, Xiao S P, Sauer M. Coupling of meshfree methods with nite elements: basic concepts and test results. Communications in Numerical Methods in Engineering, 2006, 22(10): 1031–1065

[25] Rabczuk T, Eibl J. Modelling dynamic failure of concrete with meshfree particle methods. International Journal of Impact Engineering, 2006, 32(11): 1878–1897

[26] Etse G, Willam K. Failure analysis of elastoviscoplastic material models. Journal of Engineering Mechanics, 1999, 125(1): 60–69

[27] Miehe C, Hofacker M, Welschinger F. A phase field model for rate-independent crack propagation: robust algorithmic implementation based on operator splits. Computer Methods in Applied Mechanics and Engineering, 2010, 199(45–48): 2765–2778

[28] Amiri F, Millan D, Arroyo M, Silani M, Rabczuk T. Fourth order phase-field model for local max-ent approximants applied to crack propagation. Computer Methods in Applied Mechanics and Engineering, 2016, 312(C): 254–275

[29] Areias P, Rabczuk T, Msekh M. Phase-field analysis of finite-strain plates and shells including element subdivision. Computer Methods in Applied Mechanics and Engineering, 2016, 312(C): 322–350

[30] Msekh M A, Silani M, Jamshidian M, Areias P, Zhuang X, Zi G, He P, Rabczuk T. Predictions of J integral and tensile strength of clay/epoxy nanocomposites material using phase-eld model. Composites. Part B, Engineering, 2016, 93: 97–114

[31] Hamdia K, Msekh M A, Silani M, Vu-Bac N, Zhuang X, Nguyen-Thoi T, Rabczuk T. Uncertainty quantication of the fracture properties of polymeric nanocomposites based on phase field modeling. Composite Structures, 2015, 133: 1177–1190

[32] Msekh M A, Sargado M, Jamshidian M, Areias P, Rabczuk T. ABAQUS implementation of phase-field model for brittle fracture. Computational Materials Science, 2015, 96: 472–484

[33] Amiri F, Millán D, Shen Y, Rabczuk T, Arroyo M. Phase-field modeling of fracture in linear thin shells. Theoretical and Applied Fracture Mechanics, 2014, 69: 102–109

[34] Hamdia K M, Zhuang X, He P, Rabczuk T. Fracture toughness of polymeric particle nanocomposites: evaluation of Models performance using Bayesian method. Composites Science and Technology, 2016, 126: 122–129

[35] Rabczuk T, Belytschko T, Xiao S P. Stable particle methods based on Lagrangian kernels. Computer Methods in Applied Mechanics and Engineering, 2004, 193(12–14): 1035–1063

[36] Rabczuk T, Belytschko T. Adaptivity for structured meshfree particle methods in 2D and 3D. International Journal for Numerical Methods in Engineering, 2005, 63(11): 1559–1582

[37] Nguyen V P, Rabczuk T, Bordas S, Duflot M. Meshless methods: a review and computer implementation aspects. Mathematics and Computers in Simulation, 2008, 79(3): 763–813

[38] Zhuang X, Cai Y, Augarde C. A meshless sub-region radial point interpolation method for accurate calculation of crack tip elds. Theoretical and Applied Fracture Mechanics, 2014, 69: 118–125

[39] Zhang X, Zhu H, Augarde C. An improved meshless Shepard and least square method possessing the delta property and requiring no singular weight function. Computational Mechanics, 2014, 53(2): 343–357

[40] Zhuang X, Augarde C, Mathisen K. Fracture modelling using meshless methods and level sets in 3D: framework and modelling. International Journal for Numerical Methods in Engineering, 2012, 92(11): 969–998

[41] Chen L, Rabczuk T, Bordas S, Liu G R, Zeng KY, Kerfriden P.Extended finite element method with edge-based strain smoothing (ESm-XFEM) for linear elastic crack growth. Computer Methods in Applied Mechanics and Engineering, 2012, 209‒212: 250–265

[42] Belytschko T, Black T. Elastic crack growth in finite elements with minimal remeshing. International Journal for Numerical Methods in Engineering, 1999, 45(5): 601–620

[43] Moës N, Dolbow J, Belytschko T. A finite element method for crack growth without remeshing. International Journal for Numerical Methods in Engineering, 1999, 46(1): 131–150

[44] Vu-Bac N, Nguyen-Xuan H, Chen L, Lee C K, Zi G, Zhuang X, Liu G R, Rabczuk T. A phantom-node method with edge-based strain smoothing for linear elastic fracture mechanics. Journal of Applied Mathematics, 2013( 2013): 978026

[45] Bordas S P A, Natarajan S, Kerfriden P, Augarde C E, Mahapatra D R, Rabczuk T, Dal Pont S. On the performance of strain smoothing for quadratic and enriched finite element approximations (XFEM/GFEM/PUFEM). International Journal for Numerical Methods in Engineering, 2011, 86(4–5): 637–666

[46] Bordas S P A, Rabczuk T, Hung N X, Nguyen V P, Natarajan S, Bog T, Quan D M, Hiep N V. Strain Smoothing in FEM and XFEM. Computers & Structures, 2010, 88(23–24): 1419–1443

[47] Rabczuk T, Zi G, Gerstenberger A, Wall W A. A new crack tip element for the phantom node method with arbitrary cohesive cracks. International Journal for Numerical Methods in Engineering, 2008, 75(5): 577–599

[48] Chau-Dinh T, Zi G, Lee P S, RabczukT, Song J H. Phantom-node method for shell models with arbitrary cracks. Computers & Structures, 2012, 92– 93: 242–256

[49] Song J H, Areias P M A, Belytschko T. A method for dynamic crack and shear band propagation with phantom nodes. International Journal for Numerical Methods in Engineering, 2006, 67(6): 868–893

[50] Areias P M A, Song J H, Belytschko T. Analysis of fracture in thin shells by overlapping paired elements. Computer Methods in Applied Mechanics and Engineering, 2006, 195(41–43): 5343–5360

[51] Rabczuk T, Areias P M A. A meshfree thin shell for arbitrary evolving cracks based on an external enrichment. CMES-Computer Modeling in Engineering and Sciences, 2006, 16(2): 115–130

[52] Zi G, Rabczuk T, Wall W A. Extended meshfree methods without branch enrichment for cohesive cracks. Computational Mechanics, 2007, 40(2): 367–382

[53] Rabczuk T, Bordas S, Zi G. A three-dimensional meshfree method for continuous multiple-crack initiation, propagation and junction in statics and dynamics. Computational Mechanics, 2007, 40(3): 473–495

[54] Rabczuk T, Zi G. A meshfree method based on the local partition of unity for cohesive cracks. Computational Mechanics, 2007, 39(6): 743–760

[55] Rabczuk T, Areias P M A, Belytschko T. A meshfree thin shell method for nonlinear dynamic fracture. International Journal for Numerical Methods in Engineering, 2007, 72(5): 524–548

[56] Bordas S, Rabczuk T,Zi G. Three-dimensional crack initiation, propagation, branching and junction in non-linear materials by extrinsic discontinuous enrichment of meshfree methods without asymptotic enrichment. Engineering Fracture Mechanics, 2008, 75(5): 943–960

[57] Rabczuk T, Zi G, Bordas S, Nguyen-Xuan H. A geometrically non-linear three dimensional cohesive crack method for reinforced concrete structures. Engineering Fracture Mechanics, 2008, 75(16): 4740–4758

[58] Rabczuk T, Gracie R, Song J H, Belytschko T. Immersed particle method for fluid-structure interaction. International Journal for Numerical Methods in Engineering, 2010, 81(1): 48–71

[59] Rabczuk T, Bordas S, Zi G. On three-dimensional modelling of crack growth using partition of unity methods. Computers & Structures, 2010, 88(23–24): 1391–1411

[60] Amiri F, Anitescu C, Arroyo M, Bordas S, Rabczuk T. XLME interpolants, a seamless bridge between XFEM and enriched meshless methods. Computational Mechanics, 2014, 53(1): 45–57

[61] Talebi H, Samaniego C, Samaniego E, Rabczuk T. On the numerical stability and mass- lumping schemes for explicit enriched meshfree methods. International Journal for Numerical Methods in Engineering, 2012, 89(8): 1009–1027

[62] Nguyen-Thanh N, Zhou K, Zhuang X, Areias P, Nguyen-Xuan H, Bazilevs Y, Rabczuk T. Isogeometric analysis of large-deformation thin shells using RHTsplines for multiple-patch coupling. Computer Methods in Applied Mechanics and Engineering, 2017, 316: 1157–1178

[63] Nguyen-Thanh N, Valizadeh N, Nguyen M N, Nguyen-Xuan H, Zhuang X, Areias P, Zi G, Bazilevs Y, De Lorenzis L, Rabczuk T. An extended isogeometric thin shell analysis based on Kirchho-Love theory. Computer Methods in Applied Mechanics and Engineering, 2015, 284: 265–291

[64] Jia Y, Anitescu C, Ghorashi S, Rabczuk T. Extended isogeometric analysis for material interface problems. IMA Journal of Applied Mathematics, 2015, 80(3): 608–633

[65] Ghorashi S, Valizadeh N, Mohammadi S, Rabczuk T. T-spline based XIGA for fracture analysis of orthotropic media. Computers & Structures, 2015, 147: 138–146

[66] Rabczuk T, Belytschko T. Cracking particles: a simplified meshfree method for arbitrary evolving cracks. International Journal for Numerical Methods in Engineering, 2004, 61(13): 2316–2343

[67] Rabczuk T, Areias P M A. A new approach for modelling slip lines in geological materials with cohesive models. International Journal for Numerical and Analytical Methods in Geomechanics, 2006, 30(11): 1159–1172

[68] Rabczuk T, Belytschko T. Application of particle methods to static fracture of reinforced concrete structures. International Journal of Fracture, 2006, 137(1–4): 19–49

[69] Rabczuk T, Belytschko T. A three dimensional large deformation meshfree method for arbitrary evolving cracks. Computer Methods in Applied Mechanics and Engineering, 2007, 196(29–30): 2777–2799

[70] Rabczuk T, Areias P M A, Belytschko T. A simplied meshfree method for shear bands with cohesive surfaces. International Journal for Numerical Methods in Engineering, 2007, 69(5): 993–1021

[71] Rabczuk T, Samaniego E. Discontinuous modelling of shear bands using adaptive meshfree methods. Computer Methods in Applied Mechanics and Engineering, 2008, 197(6–8): 641–658

[72] Rabczuk T, Song J H, Belytschko T. Simulations of instability in dynamic fracture by the cracking particles method. Engineering Fracture Mechanics, 2009, 76(6): 730–741

[73] Rabczuk T, Zi G, Bordas S, Nguyen-Xuan H. A simple and robust three-dimensional cracking-particle method without enrichment. Computer Methods in Applied Mechanics and Engineering, 2010, 199(37–40): 2437–2455

[74] Cai Y,Zhuang X Y, Zhu H. A generalized and ecient method for nite cover generation in the numerical manifold method. International Journal of Computational Methods, 2013, 10(5): 1350028

[75] Liu G, Zhuang X, Cui Z. Three-dimensional slope stability analysis using independent cover based numerical manifold and vector method. Engineering Geology, 2017, 225: 83–95

[76] Nguyen H B, Zhuang X, Wriggers P, Rabczuk T, Mears M E, Tran H D. 3D Isogeometric symmetric Galerkin boundary element methods. Computer Methods in Applied Mechanics and Engineering, 2017, 323: 132–150

[77] Nguyen B H, Tran H D, Anitescu C, Zhuang X, Rabczuk T. An isogeometric symmetric Galerkin boundary element method for two-dimensional crack problems. Computer Methods in Applied Mechanics and Engineering, 2016, 306: 252–275

[78] Zhu H, Wu W, Chen J, Ma G, Liu X, Zhuang X. Integration of three dimensional discontinuous deformation analysis (DDA) with binocular photogrammetry for stability analysis of tunnels in blocky rock mass. Tunnelling and Underground Space Technology, 2016, 51: 30–40

[79] Wu W, Zhu H, Zhuang X, Ma G, Cai Y. A multi-shell cover algorithm for contact detection in the three dimensional discontinuous deformation analysis. Theoretical and Applied Fracture Mechanics, 2014, 72: 136–149

[80] Cai Y, Zhu H, Zhuang X. A continuous/discontinuous deformation analysis (CDDA) method based on deformable blocks for fracture modelling. Frontiers of Structural and Civil Engineering, 2013, 7(4): 369–378

[81] Nguyen-Xuan H, Liu G R, Bordas S, Natarajan S, Rabczuk T. An adaptive singular ES-FEM for mechanics problems with singular eld of arbitrary order. Computer Methods in Applied Mechanics and Engineering, 2013, 253: 252–273

[82] Areias P, Rabczuk T. Steiner-point free edge cutting of tetrahedral meshes with applications in fracture. Finite Elements in Analysis and Design, 2017, 132: 27–41

[83] Areias P, Reinoso J, Camanho P, Rabczuk T. A constitutive-based element-by-element crack propagation algorithm with local mesh refinement. Computational Mechanics, 2015, 56(2): 291–315

[84] Areias P M A, Rabczuk T, Camanho P P. Finite strain fracture of 2D problems with injected anisotropic softening elements. Theoretical and Applied Fracture Mechanics, 2014, 72: 50–63

[85] Areias P, Rabczuk T, Dias-da-Costa D. Element-wise fracture algorithm based on rotation of edges. Engineering Fracture Mechanics, 2013, 110: 113–137

[86] Areias P, Rabczuk T, Camanho P P. Initially rigid cohesive laws and fracture based on edge rotations. Computational Mechanics, 2013, 52(4): 931–947

[87] Areias P, Rabczuk T. Finite strain fracture of plates and shells with congurational forces and edge rotation. International Journal for Numerical Methods in Engineering, 2013, 94(12): 1099–1122

[88] Silani M, Talebi H, Hamouda A S, Rabczuk T. Nonlocal damage modeling in clay/epoxy nanocomposites using a multiscale approach. Journal of Computational Science, 2016, 15: 18–23

[89] Talebi H, Silani M, Rabczuk T. Concurrent multiscale modelling of three dimensional crack and dislocation propagation. Advances in Engineering Software, 2015, 80: 82–92

[90] Silani M, Talebi H, Ziaei-Rad S, Hamouda A M S, Zi G, Rabczuk T. A three dimensional extended Arlequin method for dynamic fracture. Computational Materials Science, 2015, 96: 425–431

[91] Silani M, Ziaei-Rad S, Talebi H, Rabczuk T. A semi-concurrent multiscale approach for modeling damage in nanocomposites. Theoretical and Applied Fracture Mechanics, 2014, 74: 30–38

[92] Talebi H, Silani M, Bordas S, Kerfriden P, Rabczuk T. A computational library for multiscale modelling of material failure. Computational Mechanics, 2014, 53(5): 1047–1071

[93] Talebi H, Silani M, Bordas S P A, Kerfriden P, Rabczuk T. Molecular dynamics/XFEM coupling by a three-dimensional extended bridging domain with applications to dynamic brittle fracture. International Journal for Multiscale Computational Engineering, 2013, 11(6): 527–541

[94] Yang S W, Budarapu P R, Mahapatra D R, Bordas S P A, Zi G, Rabczuk T. A meshless adaptive multiscale method for fracture. Computational Materials Science, 2015, 96: 382–395

[95] Budarapu P, Gracie R, Bordas S, Rabczuk T. An adaptive multiscale method for quasi-static crack growth. Computational Mechanics, 2014, 53(6): 1129–1148

[96] Budarapu P, Gracie R, Yang S W, Zhuang X, Rabczuk T. Ecient coarse graining in multiscale modeling of fracture. Theoretical and Applied Fracture Mechanics, 2014, 69: 126–143

[97] Zhuang X, Wang Q, Zhu H. Multiscale modelling of hydro-mechanical couplings in quasi-brittle materials. International Journal of Fracture, 2017, 204(1): 1–27

[98] Zhu H, Wang Q, Zhuang X. A nonlinear semi-concurrent multiscale method for fractures. International Journal of Impact Engineering, 2016, 87: 65–82

[99] Zhuang X, Wang Q, Zhu H. A 3D computational homogenization model for porous material and parameters identication. Computational Materials Science, 2015, 96: 536–548

[100] Kouznetsova V, Geers M G D, Brekelmans W A M. Multi-scale constitutive modelling of heterogeneous materials with a gradient-enhanced computational homogenization scheme. International Journal for Numerical Methods in Engineering, 2002, 54(8): 1235–1260

[101] Rabczuk T, Ren H. Peridynamic formulation for the modelling of quasi-static fractures and contacts in brittle rocks. Engineering Geology, 2017, 225: 42–48

[102] Amani J, Oterkus E, Areias P M A, Zi G, Nguyen-Thoi T, Rabczuk T. A non-ordinary state-based peridynamics formulation for thermoplastic fracture. International Journal of Impact Engineering, 2016, 87: 83–94

[103] Ren H, Zhuang X, Rabczuk T. A new peridynamic formulation with shear deformation for elastic solid. Journal of Micromechanics and Molecular Physics, 2016, 1(2): 1650009

[104] Ren H, Zhuang X, Cai Y, Rabczuk T. Dual-horizon peridynamics. International Journal for Numerical Methods in Engineering, 2016, 108(12): 1451–1476

[105] Ren H, Zhuang X, Rabczuk T. Dual-horizon peridynamics: a stable solution to varying horizons. Computer Methods in Applied Mechanics and Engineering, 2017, 318: 762–782

[106] Gaun F, Moore I D, Lin G. Seismic Analysis of Reservoir-Dam-Soil Systems in the Time Domain. The 8th international conference on Computer Methods and Advances in Geomechanics, Siriwardane & Zaman (Eds), 1994, 2: 917–922

[107] Zeidan B. State of Art in Design and Analysis of Concrete Gravity Dams. Tanta University, 2014, 1–56

[108] Wieland M, Ahlehagh S. Dynamic stability analysis of a gravity dam subject to the safety evaluation earthquake. 9th European club symposium IECS2013, Venice, Italy, 10–12 April, 2013

[109] Benerjee A, Paul D K, Dubey R N. Estimation of cumulative damage in concrete gravity dam considering foundatiom-reservoir interaction. Tenth U.S. National Conference on Earthquake Engineering Frontiers of Earthquake Engineering, Anchorage, Alaska, USA, 21–25 July, 2014

[110] Shariatmadar H, Mirhaj A. Modal Response of Dam-Reservoir-Foundation Interaction. 8th International Congress on Civil Engineering, Shiraz University, Shiraz, Iran, 11–13 May, 2009

[111] Berrabah A T, Belharizi M, Bekkouche A. Modal behavior of dam reservoir foundation system. Electronic Journal of Geotechnical Engineering, 2011, 16: 1593–1605

[112] Khosravi S, Heydari M. Modelling of concrete gravity dam including dam-water-foundation rock interaction. World Applied Sciences Journal, 2013, 22(4): 538–546

[113] Benerjee A, Paul D K, Dubey R N. Modelling issues in the seismic analysis of concrete gravity dams. Dam Engineering, 2014, 24(2): 18–38

[114] Joghataie A, Dizaji M S, Dizaji F S. Neural Network Software for Dam-Reservoir-Foundation Interaction. International Conference on Intelligent Computational Systems (ICICS'2012), Dubai, UAE, 7–8 January, 2012

[115] Hung J, Zerva A. Nonlinear analysis of a dam-reservoir-foundation system under spatially variable seismic excitations. The 14th World Conference on Earthquake Engineering, Beijing, China, 12–17 October, 2008

[116] Heirany Z, Ghaemian M. The effect of foundation’s modulus of elasticity on concrete gravity dam’s behavior. Indian Journal of Science and Technology, 2012, 5(5): 2738–2740

[117] Berrabah A T. Dynamic Soil-Fluid –Structure Interaction Applied for Concrete Dam. Dissertation for PhD degree. Chetouane, Algeria, Aboubekr Belkaid University, 2012

[118] Zeidan B. Effect of foundation flexibility on dam-reservoir-foundation interaction. Eighteenth International Water Technology Conference (IWTC18), Sharm El-Sheikh, Egypt, 12–14 March, 2015

[119] Burman A, Maity D, Sreedeep S. Iterative analysis of concrete gravity dam-nonlinear foundation interaction. International Journal of Engineering Science and Technology, 2010, 2(4): 85–99

[120] Chopra A K. Hydrodynamic pressures on dams during earthquakes. Journal of Engineering Mechanics, ASCE, 1967, 93(6): 205–223

[121] Fereydooni M, Jahanbakhsh M. An analysis of the hydrodynamic pressure on concrete gravity dams under earthquake forces using ANSYS software. Indian Journal of Fundamental and Applied Life Sciences, 2015, 5(S4): 984–988

[122] Berrabah AT, Armouti N, Belharizi M, Bekkouche A. Dynamic soil structure interaction study. Jordan Journal of Civil Engineering, 2012, 6(2): 161–173

[123] Pekan O A, Cui Y Z. Failure analysis of fractured dams during earthquakes by DEM. Eng Struct, 2004, 26: 1483–1502.

[124] Patil S V, Awari U R. Effect of soil structure interaction on gravity dam. International Journal of Science, Engineering and Technology Research (IJSETR), 2015, 4(4): 1046– 4053

[125] Chopra A K, Chakrabarti P. The earthquake experience at Koyna dam and stress in concrete gravity dam. Earthquake Engineering and Structural Dynamic, 1972, 1(2): 151–164

[126] Pal W. Seismic cracking of concrete gravity dam. Journal of Structural Division, 1976, 102 (ST9): 1827–1844

[127] Pasma S A, Daik R, Maskat M Y, Hassan O. Application of box-behnken design in optimization of glucose production from oil palm empty fruit bunch cellulose. International Journal of Polymer Science, 2013, 2013: 104502

[128] Qiu P, Cui M, Kang K, Park B, Son Y, Khim E, Jang M, Khim J. Application of Box–Behnken design with response surface methodology for modeling and optimizing ultrasonic oxidation of arsenite with H₂O₂. Central European Journal of Chemistry, 2014, 12(2): 164–172

[129] Tekindal M A, Bayrak H, Ozkaya B, Genc Y. Box Behnken experimental design in factorial experiments: the importance of bread for nutrition and health. Turkish Journal of Field Crops, 2012, 17(2): 115–123

[130] Amenaghawon N A, Nwaru K I, Aisien F A, Ogbeide S E, Okieimen C O. Application of Box-Behnken design for the optimization of citric acid production from corn starch using aspergillus niger. British Biotechnology Journal, 2013, 3(3): 236–245

[131] Souza A S, dos Santos W N L, Ferreira S L C. Application of Box–Behnken design in the optimization of an on-line pre-concentration system using knotted reactor for cadmium determination by flame atomic absorption spectrometry. Spectrochimica Acta Part B: Atomic Spectroscopy, 2005, 60(5): 737–742

[132] Aslan N, Cebeci Y. Application of Box-Behnken design and response surface methodology for modeling of some Turkish coals. Fuel, 2007, 86(1–2): 90–97

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag GmbH Germany, part of Springer Nature