An ultra-thin bolt tension sensor and online monitoring system: For application in hydropower plant unit

Abstract

The condition of bolted connections significantly affects the structural safety. However, conventional bolt tension sensors fail to provide precise measurements due to their bulky size or inadequate stability. This study employs the piezoresistive effect of crystalline silicon material to fabricate an ultrathin sensor. The sensor exhibits a linear relationship between pressure and voltage, an exceptional stability under varying temperatures, and a superior resistance to corrosion, making it adaptable and user-friendly for applications of high-strength bolt tension monitoring. A monitoring system, incorporating the proposed sensor, has also been developed. This system provides real-time display of bolt tension and enables the assessment of sensor and structural conditions, including bolt loosening or component failure. The efficacy of the proposed sensor and monitoring system was validated through a project carried out at the Xiluodu Hydropower Plant. According to the results, the sensor and online monitoring system effectively gauged and proficiently conveyed and stored bolt tension data. In addition, correlations were created between bolt tensions and essential unit parameters, such as water head, active power, and pressures at vital points, facilitating anomaly detection and early warning.

Graphical abstract

Keywords

ultra-thin sensor / high-strength bolt tension / online monitoring system / anomaly alarm / hydro-generator units

References

[1] Rehman S, Usman M, Toor M, Hussaini Q A. Advancing structural health monitoring: A vibration-based IoT approach for remote real-time systems. Sensors and Actuators. A, Physical, 2024, 365: 114863

[2] Song G, Li W, Wang B, Ho S. A review of rock bolt monitoring using smart sensors. Sensors, 2017, 17(4): 776

[3] Wang T, Song G, Liu S, Li Y, Xiao H. Review of bolted connection monitoring. International Journal of Distributed Sensor Networks, 2013, 9(12): 871213

[4] Huang J, Liu J, Gong H, Deng X. A comprehensive review of loosening detection methods for threaded fasteners. Mechanical Systems and Signal Processing, 2022, 168: 108652

[5] Tong T, Hua J, Gao F, Lin J. Identification of bolt state in lap joint based on propagation model and imaging methods of Lamb waves. Mechanical Systems and Signal Processing, 2023, 200: 110569

[6] YanHZengGZhaoDTianM. Fault diagnosis of the attachment bolt looseness based on wavelet analysis. Mechanical Science and Technology for Aerospace Engineering, 2012, 31: 1110–1114 (in Chinese)

[7] Wang T, Liu S, Shao J, Li Y. Health monitoring of bolted joints using the time reversal method and piezoelectric transducers. Smart Materials and Structures, 2016, 25(2): 025010

[8] Yin H, Wang T, Yang D, Liu S, Shao J, Li Y. A smart washer for bolt looseness monitoring based on piezoelectric active sensing method. Applied Sciences, 2016, 6(11): 320

[9] Wu H, Guo Y, Xiong L, Liu W, Li G, Zhou X. Optical fiber-based sensing, measuring, and implementation methods for slope deformation monitoring: A review. IEEE Sensors Journal, 2019, 19(8): 2786–2800

[10] Wang P, Zhang N, Kan J, Xie Z, Wei Q, Yao W. Fiber Bragg grating monitoring of full-bolt axial force of the bolt in the deep strong mining roadway. Sensors, 2020, 20(15): 4242

[11] Khomenko A, Koricho E, Haq M, Cloud G L. Bolt tension monitoring with reusable fiber Bragg-grating sensors. Journal of Strain Analysis for Engineering Design, 2016, 51(2): 101–108

[12] Deng S, Wang T, Tan B, Yu W, Lu G. Proof-of-concept study of bolt connection status monitoring using fiber Bragg grating curvature sensor. Smart Materials and Structures, 2022, 31(11): 114001

[13] Chen L, Xiong H, Yang Z, Long Y, Ding Y, Kong Q. Preload measurement of steel-to-timber bolted joint using piezoceramic-based electromechanical impedance method. Measurement, 2022, 190: 110725

[14] WangTYangZShaoJLiY. Research on bolt loosen detection based on piezoelectric impedance technology. Chinese Journal of Sensors and Actuators, 2014, 27(10): 1321–1325 (in Chinese)

[15] Balavalad K B. A review on silicon nanowires and their use in the development of nano piezoresistive pressure sensors. Nanoscience & Nanotechnology-Asia, 2023, 13(5): 14–22

[16] Nguyen T, Dinh T, Phan H P, Pham T A, Dau V T, Nguyen N T, Dao D V. Advances in ultrasensitive piezoresistive sensors: From conventional to flexible and stretchable applications. Materials Horizons, 2021, 8(8): 2123–2150

[17] Wang T, Wei D, Shao J, Li Y, Song G. Structural stress monitoring based on piezoelectric impedance frequency shift. Journal of Aerospace Engineering, 2018, 31(6): 04018092

[18] Shao J, Wang T, Yin H, Yang D, Li Y. Bolt looseness detection based on piezoelectric impedance frequency shift. Applied Sciences, 2016, 6(10): 298

[19] Wang B, Huo L, Chen D, Li W, Song G. Impedance-based pre-stress monitoring of rock bolts using a piezoceramic-based smart washer––A feasibility study. Sensors, 2017, 17(2): 250

[20] Jiang X, Ma K, Lu S, Zhang L, Wang Z, Guo Y, Wang X, Zhao Z, Qu X, Lu Y. Structure bolt tightening force and loosening monitoring by conductive MXene/FPC pressure sensor with high sensitivity and wide sensing range. Sensors and Actuators. A, Physical, 2021, 331: 113005

[21] BrønsMEbbehøjLTcherniakDThomsenJ J. Using piezoelectrically excited transverse vibrations for bolt tension estimation. In: Proceedings of ISMA 2020 and USD 2020. Red Hook, NY: Curran Associates, Inc., 2020, 1175–1187

[22] Pan Q, Pan R, Shao C, Chang M, Xu X. Research review of principles and methods for ultrasonic measurement of axial stress in bolts. Chinese Journal of Mechanical Engineering, 2020, 33(1): 11

[23] Li X, Wang S, Li Z, Yang R, Li Z. Measurement of bolt axial stress using a combination of trailing wave and shear wave ultrasound. NDT & E International, 2024, 143: 103056

[24] BickfordJ. An Introduction to the Design and Behavior of Bolted Joints, Revised and Expanded. New York: Routledge, 2018

[25] KoshtiA M. Ultrasonic Measurement of Loads in Bolts Used in Structural Joints. NESC NDE IDT Face to Face Meeting Technical Report No. JSC-CN-32910. 2015

[26] Amerini F, Meo M. Structural health monitoring of bolted joints using linear and nonlinear acoustic/ultrasound methods. Structural Health Monitoring, 2011, 10(6): 659–672

[27] Wang C, Wang N, Ho S, Chen X, Pan M, Song G. Design of a novel wearable sensor device for real-time bolted joints health monitoring. IEEE Internet of Things Journal, 2018, 5(6): 5307–5316

[28] Li S, Li H, Zhou X, Wang Y H, Li X H, Gan D, Zhu R H. Damage detection of flange bolts in wind turbine towers using dynamic strain responses. Journal of Civil Structural Health Monitoring, 2023, 13(1): 67–81

[29] Miao R, Shen R, Zhang S, Xue S. A review of bolt tightening force measurement and loosening detection. Sensors, 2020, 20(11): 3165

[30] Pan Y, Ma Y, Dong Y, Gu Z, Wang D. A vision-based monitoring method for the looseness of high-strength bolt. IEEE Transactions on Instrumentation and Measurement, 2021, 70: 1–14

[31] Yang Z, Huo L. Bolt preload monitoring based on percussion sound signal and convolutional neural network (CNN). Nondestructive Testing and Evaluation, 2022, 37(4): 464–481

[32] Yuan C, Chen W, Hao H, Kong Q. Near real-time bolt-loosening detection using mask and region-based convolutional neural network. Structural Control and Health Monitoring, 2021, 28(7): e2741

[33] Xu J, Dong J, Li H, Zhang C, Ho S C. Looseness monitoring of bolted spherical joint connection using electro-mechanical impedance technique and BP neural networks. Sensors, 2019, 19(8): 1906

[34] Baptista F G, Budoya D E, de Almeida V A D, Ulson J A C. An experimental study on the effect of temperature on piezoelectric sensors for impedance-based structural health monitoring. Sensors, 2014, 14(1): 1208–1227

Competing interests

The authors declare that they have no competing interests.

RIGHTS & PERMISSIONS

2024 Higher Education Press