Autogenous healing mechanism of cement-based materials

Abstract

Autogenous self-healing is the innate and fundamental repair capability of cement-based materials for healing cracks. Many researchers have investigated factors that influence autogenous healing. However, systematic research on the autogenous healing mechanism of cement-based materials is lacking. The healing process mainly involves a chemical process, including further hydration of unhydrated cement and carbonation of calcium oxide and calcium hydroxide. Hence, the autogenous healing process is influenced by the material constituents of the cement composite and the ambient environment. In this study, different factors influencing the healing process of cement-based materials were investigated. Scanning electron microscopy and optical microscopy were used to examine the autogenous healing mechanism, and the maximum healing capacity was assessed. Furthermore, detailed theoretical analysis and quantitative detection of autogenous healing were conducted. This study provides a valuable reference for developing an improved healing technique for cement-based composites.

Graphical abstract

Keywords

autogenous healing / cement-based materials / healing mechanism / aggregation effect

References

[1] Wang X F, Yang Z H, Fang C, Han N X, Zhu G M, Tang J N, Xing F. Evaluation of the mechanical performance recovery of self-healing cementitious materials—Its methods and future development: A review. Construction & Building Materials, 2019, 212: 400–421

[2] Yıldırım G, KeskinÖ K, Keskin S B I, Şahmaran M, Lachemi M. A review of intrinsic self-healing capability of engineered cementitious composites: Recovery of transport and mechanical properties. Construction & Building Materials, 2015, 101: 10–21

[3] van Tittelboom K, de Belie N. Self-healing in cementitious materials—A review. Materials, 2013, 6(6): 2182–2217

[4] de Belie N, Gruyaert E, Al-Tabbaa A, Antonaci P, Baera C, Bajare D, Darquennes A, Davies R, Ferrara L, Jefferson T, Litina C, Miljevic B, Otlewska A, Ranogajec J, Roig-Flores M, Paine K, Lukowski P, Serna P, Tulliani J M, Vucetic S, Wang J, Jonkers H M. A review of self-healing concrete for damage management of structures. Advanced Materials Interfaces, 2018, 5(17): 1–28

[5] Yankelevsky D Z, Avnon I. Controlled dynamic cracking of high-strength concrete specimens. Journal of Materials in Civil Engineering, 1994, 6(4): 564–577

[6] Lang L, Chen B, Duan H. Modification of nanoparticles for the strength enhancing of cement-stabilized dredged sludge. Journal of Rock Mechanics and Geotechnical Engineering, 2021, 13(3): 694–704

[7] Medina C, de Rojas M I S, Frías M. Freeze−thaw durability of recycled concrete containing ceramic aggregate. Journal of Cleaner Production, 2013, 40: 151–160

[8] Li D, Chen B, Xue K, Li A, Zheng H, Zhang M. Durability and mechanical performance of pure/chelated superabsorbent polymer (SAP/SAPC) added mortar in cold region. Journal of Building Engineering, 2021, 44: 102982

[9] Li D, Chen B, Chen X, Fu B, Wei H, Xiang X. Synergetic effect of superabsorbent polymer (SAP) and crystalline admixture (CA) on mortar macro-crack healing. Construction & Building Materials, 2020, 247: 118521

[10] Li D, Zhang M, Wen Z, Chen B, Xue K, Li A. Quantitative evaluation of characteristic precipitation event (CPE)’s effect on hydro-thermal state of active layer in Beiluhe area. Natural Hazards, 2021, 105(2): 2307–2326

[11] Li D, Wen Z, Luo J, Zhang M, Chen B. Slope failure induced by cold snap and continuous precipitation in the seasonal frozen area of Qinghai-Tibet Plateau. Science of the Total Environment, 2019, 694: 133547

[12] Li D, Wen Z, Cheng Q, Xing A, Zhang M, Li A. Thermal dynamics of the permafrost active layer under increased precipitation at the Qinghai-Tibet Plateau. Journal of Mountain Science, 2019, 16(2): 309–322

[13] Zhang H, Fan S, Lang L, Gu K, Shi R, Xue K, Li D. An impervious sand used as separation layer in collapsible loess embankment: A case study. Case Studies in Construction Materials, 2022, 16: e01106

[14] Otieno M B, Alexander M G, Beushausen H D. Corrosion in cracked and uncracked concrete—Influence of crack width, concrete quality and crack reopening. Magazine of Concrete Research, 2010, 62(6): 393–404

[15] SidiqAGravina RGiustozziF. Is concrete healing really efficient? A review. Construction & Building Materials, 2019, 205: 257–273

[16] Jiang Z, Li W, Yuan Z, Yang Z. Self-healing of cracks in concrete with various crystalline mineral additives in underground environment. Journal Wuhan University of Technology, Materials. Science Edition, 2014, 29(5): 938–944

[17] Li C, Wu M, Chen Q, Jiang Z. Chemical and mineralogical alterations of concrete subjected to chemical attacks in complex underground tunnel environments during 20–36 years. Cement and Concrete Composites, 2018, 86: 139–159

[18] Li W, Dong B, Yang Z, Xu J, Chen Q, Li H, Xing F, Jiang Z. Recent advances in intrinsic self-healing cementitious materials. Advanced Materials, 2018, 30(17): 1–9

[19] Ferrara L, Van Mullem T, Alonso M C, Antonaci P, Borg R P, Cuenca E, Jefferson A, Ng P L, Peled A, Roig-Flores M, Sanchez M, Schroefl C, Serna P, Snoeck D, Tulliani J M, De Belie N. Experimental characterization of the self-healing capacity of cement based materials and its effects on the material performance: A state of the art report by COST Action SARCOS WG2. Construction & Building Materials, 2018, 167: 115–142

[20] Wang X, Xu J, Wang Z, Yao W. Use of recycled concrete aggregates as carriers for self-healing of concrete cracks by bacteria with high urease activity. Construction & Building Materials, 2022, 337: 127581

[21] Xu J, Yao W. Multiscale mechanical quantification of self-healing concrete incorporating non-ureolytic bacteria-based healing agent. Cement and Concrete Research, 2014, 64: 1–10

[22] Zhou S, Zhu H, Ju J W, Yan Z, Chen Q. Modeling microcapsule-enabled self-healing cementitious composite materials using discrete element method. International Journal of Damage Mechanics, 2017, 26(2): 340–357

[23] Zhuang X, Zhou S. The prediction of self-healing capacity of bacteria-based concrete using machine learning approaches. Computers, Materials & Continua, 2019, 59(1): 57–77

[24] Zhu H, Zhou S, Yan Z, Ju J W, Chen Q. A two-dimensional micromechanical damage-healing model on microcrack-induced damage for microcapsule-enabled self-healing cementitious composites under tensile loading. International Journal of Damage Mechanics, 2015, 24(1): 95–115

[25] Chen Q, Jiang Z, Zhu H, Ju J W, Yan Z, Li H, Rabczuk T. A multiphase micromechanical model for unsaturated concrete repaired by electrochemical deposition method with the bonding effects. International Journal of Damage Mechanics, 2018, 27(9): 1307–1324

[26] Chen Q, Xie L, Huang A, Li B, Sun Y, Jiang Z, Li W, Zhu H. Healing of concrete cracks by in-situ synthesis of ettringite induced by electric field. Construction & Building Materials, 2022, 352: 128685

[27] Zhu H, Chen Q, Yan Z, Ju J W, Zhou S. Micromechanical models for saturated concrete repaired by the electrochemical deposition method. Materials and Structures, 2014, 47: 1067–1082

[28] Windapo A, Omopariola E D, Olugboyega O, Moghayedi A. Use and performance of conventional and sustainable building technologies in low-income housing. Sustainable Cities and Society, 2021, 65: 102606

[29] Liu H, Zhang Q, Gu C, Su H, Li V C. Influence of micro-cracking on the permeability of engineered cementitious composites. Cement and Concrete Composites, 2016, 72: 104–113

[30] Sahmaran M, Yildirim G, Erdem T K. Self-healing capability of cementitious composites incorporating different supplementary cementitious materials. Cement and Concrete Composites, 2013, 35(1): 89–101

[31] Xie J, Wang J, Rao R, Wang C, Fang C. Effects of combined usage of GGBS and fly ash on workability and mechanical properties of alkali activated geopolymer concrete with recycled aggregate. Composites Part B: Engineering, 2019, 164: 179–190

[32] Roig-Flores M, Moscato S, Serna P, Ferrara L. Self-healing capability of concrete with crystalline admixtures in different environments. Construction & Building Materials, 2015, 86: 1–11

[33] Hong G, Choi S. Modeling rapid self-sealing of cracks in cementitious materials using superabsorbent polymers. Construction & Building Materials, 2018, 164: 570–578

[34] Akhavan A, Shafaatian S M H, Rajabipour F. Quantifying the effects of crack width, tortuosity, and roughness on water permeability of cracked mortars. Cement and Concrete Research, 2012, 42(2): 313–320

[35] Snoeck D, De Belie N. Repeated autogenous healing in strain-hardening cementitious composites by using superabsorbent polymers. Journal of Materials in Civil Engineering, 2016, 28(1): 04015086

[36] Palin D, Jonkers H M, Wiktor V. Autogenous healing of sea-water exposed mortar: Quantification through a simple and rapid permeability test. Cement and Concrete Research, 2016, 84: 1–7

[37] Sisomphon K, Copuroglu O, Koenders E A B. Self-healing of surface cracks in mortars with expansive additive and crystalline additive. Cement and Concrete Composites, 2012, 34(4): 566–574

[38] Hung C, Su Y. Medium-term self-healing evaluation of engineered cementitious composites with varying amounts of fly ash and exposure durations. Construction & Building Materials, 2016, 118: 194–203

[39] Wu J, Xue K, Ding Z, Lang L, Gu K, Li X, Zhang M, Li D. Investigation on thermal insulation and mechanical strength of lightweight aggregate concrete and porous mortar in cold regions. Journal of Renewable Materials, 2022, 10(12): 1–17

Acknowledgements

This research project was supported by the Fundamental Research Funds for the Central Universities (No. AUGA5710012122).

Conflict of Interest

The authors declare that they have no conflict of interest.

RIGHTS & PERMISSIONS

2023 Higher Education Press