Secondary recrystallization behaviors and the formation mechanism of strong Goss textures of oriented electrical steels

Abstract

During secondary recrystallization of oriented electrical steels, the dispersed inhibitors strongly hinder grain boundary migration. The existing secondary recrystallization theories, which mainly focus on the initial migration behavior of grain boundaries, not only fails to clarify the mechanism of secondary recrystallization, but also cannot explain the common phenomenon that smaller Goss grains can eventually engulf all other grains. This study confirms that the significant molar volume effect generated by the precipitation of inhibitors within the ferrite matrix strongly inhibits the coarsening of the central layer inhibitors in steel sheets at high temperatures, but there is still a chance for coarsening of the surface layer inhibitors. Therefore, the surface grains can grow before the growth of grains in the central layer. The highly enhanced elastic anisotropy of ferrite at high temperatures results in slow boundary migration of surface large-sized non-Goss grains towards Goss grains, while surface Goss grain boundaries can quickly migrate towards adjacent small-sized non-Goss grains, allowing Goss grains to gradually accumulate an absolute advantage in larger size, engulf all other grains, and ultimately form a strong Goss texture.

Graphical abstract

Keywords

grain oriented electrical steel / Goss grains / abnormal growth / elastic anisotropy / texture

References

[1] Afer H, Rouag N, Penelle R . Comparison between the growth behaviour of the small Goss grains and that of the large matrix grains in silicon steels.Influence of the textured cluster presence. Materials Science Forum, 2005, 495–497: 525–530

[2] Chen N, Zaefferer S, Lahn L, et al. Effects of topology on abnormal grain growth in silicon steel.Acta Materialia, 2003, 51(6): 1755–1765

[3] Shimizu R, Harase J . Coincidence grain boundary and texture evolution in Fe–3%Si.Acta Metallurgica, 1989, 37(4): 1241–1249

[4] Hayakawa Y, Szpunar J A . A new model of Goss texture development during secondary recrystallization of electrical steel.Acta Materialia, 1997, 45(11): 4713–4720

[5] Park H K, Kim D Y, Hwang N M, et al. Microstructural evidence of abnormal grain growth by solid-state wetting in Fe–3%Si steel.Journal of Applied Physics, 2004, 95(10): 5515–5521

[6] Mao W, An Z, Li S . Influence of MnS particles on the behaviors of grain boundary migration in Fe–3%Si alloys.Science Bulletin, 2009, 54(23): 4537–4540

[7] Böttcher A, Lücke K . Influence of subsurface layers on texture and microstructure development in RGO electrical steel.Acta Metallurgica et Materialia, 1993, 41(8): 2503–2514

[8] Mao W, Ren H . The mechanism of abnormal growth of Goss oriented grains during secondary recrystallization of oriented electrical steels.Journal of Inner Mongolia University of Science and Technology, 2025, 44(2): 111–118

[9] Yong Q . Secondary Phases in Steels.Beijing: Metallurgical Industry Press, 2006, 60–62

[10] Cui Z, Zhu L, Zhang Q, et al. Morphological analysis on MnS inclusions in 45# steel.Foundry Technology, 2016, 37(5): 857–859

[11] Reeber R R, Wang K . .Materials Research Society Symposium Proceedings, 2000,

[12] Li Y, Mao W, Yang P . Inhomogeneous distribution of second phase particles in grain oriented electrical steels.Journal of Materials Science & Technology, 2011, 27(12): 1120–1124

[13] Mao W, Yang P . Material Science Principles on Electrical Steels.Beijing: Higher Education Press, 2013, 91–96

[14] Hornbogen E. Werkstoffe. 5. Auflage. Springer-Verlage, Berlin, 1994, 102–107

[15] Hornbogen E, Warlimont H. Metallkunde. 2. Auflage. Berlin: Springer-Verlag, 1991, 84–87

[16] Routbort J L, Reid C N, Fisher E S, et al. High-temperature elastic constants and the phase stability of silicon-iron.Acta Metallurgica, 1971, 19(12): 1307–1316

[17] Mao W, Li Y, Guo W, et al. Influence of MnS particles inside grains on the boundary migration before secondary recrystallization of grain oriented electrical steels.Diffusion and Defect Data, Solid State Data Part B: Solid State Phenomena, 2010, 160: 247–250

[18] Li Y, Mao W . Precipitation behaviors of second-phase particles in grain-oriented electrical steels during manufacturing processes.Journal of University of Science and Technology Beijing, 2011, 33(4): 439–443

[19] Mao W, Guo W, Li Y . Growth process of Goss grains during secondary recrystallization of grain-oriented electrical steels.Steel Research International, 2010, 81(12): 1117–1120

[20] Mao W, Li Y, Yang P, et al. Abnormal growth mechanisms of Goss grains in grain-oriented electrical steels.Materials Science Forum, 2012, 702–703: 585–590

[21] Guo W, Mao W . Abnormal growth of Goss grains in grain-oriented electrical steels.Journal of Materials Science & Technology, 2010, 26(8): 759–762

[22] Mao W, Ren H. Physical Metallurgical Principles of Grain Oriented Electrical Steels. Beijing: Higher Education Press, 2026, 70–75 (in Chinese)

RIGHTS & PERMISSIONS

Higher Education Press