Copper-coated yarn architectures for knitted fabrics with enhanced strain sensitivity and wrist posture recognition

Abstract

Knitted flexible sensors, owing to their looped architecture, exhibit excellent stretchability, comfort, and responsiveness, enabling real-time monitoring of biomechanical motion. Here, we systematically investigated the electromechanical performance of conductive fabrics composed of stainless steel, silver-plated, and copper-plated yarns across rib, half-air layer, and air-layer knitting structures. Among them, copper-plated rib fabrics with (35r × 35r)/5 cm density demonstrated superior sensing performance, with stable resistance variation (~2 to ~1 kΩ from 0° to 90° wrist bending), high linearity (R² = 0.959), good stability (δ = 0.232 after 100 cycles), and a gauge factor (GF) of ~2.73. An equivalent resistance model was established to elucidate the impact of loop geometry on sensor performance, confirming that higher coursewise density lowers resistance and enhances sensitivity. A wearable knitted wristband sensor was fabricated that accurately distinguishes wrist postures. These findings highlight the potential of structured conductive knits as customizable, high-performance platforms for next-generation wearable health monitoring and rehabilitation systems.

Graphical abstract

Keywords

knitted flexible sensor / electromechanical coupling / wearable health monitoring / strain-sensing fabric / conductive yarn architecture

References

[1] Javaid M, Haleem A, Rab S, et al. Sensors for daily life: a review.Sensors International, 2021, 2: 100121

[2] Yin R, Wang D, Zhao S, et al. Wearable sensors-enabled human–machine interaction systems: from design to application.Advanced Functional Materials, 2021, 31(11): 2008936

[3] Zhao J, Yang Y, Bo L, et al. Research progress on applying intelligent sensors in sports science.Sensors, 2024, 24(22): 7338

[4] Huang X, Xue Y, Ren S, et al. Sensor-based wearable systems for monitoring human motion and posture: a review.Sensors, 2023, 23(22): 9047

[5] Zhang Y, Xia X, Ma K, et al. Functional textiles with smart properties: their fabrications and sustainable applications.Advanced Functional Materials, 2023, 33(33): 2301607

[6] Hossain M T, Reza S, Islam M A, et al. Progress and prospects of chemical functionalization of textiles via nanotechnology.ACS Applied Engineering Materials, 2025, 3(1): 1–20

[7] Júnior H L O, Neves R M, Monticeli F M, et al. Smart fabric textiles: recent advances and challenges.Textiles, 2022, 2(4): 582–605

[8] Qin J, Habib S, Shao X, et al. AI-assisted dyeing optimization of polyimide fibers via backpropagation neural networks.Progress in Organic Coatings, 2025, 209: 109611

[9] Jegan R, Nimi W S . On the development of low power wearable devices for assessment of physiological vital parameters: a systematic review.Journal of Public Health, 2023, 32: 1–16

[10] Cherenack K, van Pieterson L . Smart textiles: challenges and opportunities.Journal of Applied Physics, 2012, 112: 091301

[11] Kumari A, Sengupta A, Agarwal A . The role of conducting yarns in shaping next-generation wearable sensors: a review.ACS Applied Materials & Interfaces, 2025, 17(30): 42541–42567

[12] Liu X, Wei Y, Qiu Y . Advanced flexible skin-like pressure and strain sensors for human health monitoring.Micromachines, 2021, 12(6): 695

[13] Islam G M N, Ali A, Collie S . Textile sensors for wearable applications: a comprehensive review.Cellulose, 2020, 27(11): 6103–6131

[14] Choudhry N A, Arnold L, Rasheed A, et al. Textronics — a review of textile-based wearable electronics.Advanced Engineering Materials, 2021, 23(12): 2100469

[15] Zhang J W, Zhang Y, Li Y Y, et al. Textile-based flexible pressure sensors: a review.Polymer Reviews, 2022, 62(1): 65–94

[16] Ishac K, Suzuki K . LifeChair: a conductive fabric sensor-based smart cushion for actively shaping sitting posture.Sensors, 2018, 18(7): 2261

[17] Jeong Y J, Kim Y E, Kim K J, et al. Multilayered fabric pressure sensor for real-time piezo-impedance imaging of pressure distribution.IEEE Transactions on Instrumentation and Measurement, 2020, 69(2): 565–572

[18] Nan N, He J, You X, et al. A stretchable, highly sensitive, and multimodal mechanical fabric sensor based on electrospun conductive nanofiber yarn for wearable electronics.Advanced Materials Technologies, 2019, 4(3): 1800338

[19] Lv J C, Zhang L P, Zhong Y, et al. High-performance polypyrrole coated knitted cotton fabric electrodes for wearable energy storage.Organic Electronics, 2019, 74: 59–68

[20] Wang H, Li S, Wang Y, et al. Bioinspired fluffy fabric with in situ grown carbon nanotubes for ultrasensitive wearable airflow sensor.Advanced Materials, 2020, 32(11): 1908214

[21] Masihi S, Atashbar M Z, Panahi M, , et al. A novel printed fabric based porous capacitive pressure sensor for flexible electronic applications. In: 2019 IEEE SENSORS, 2019, 1‒4

[22] Zheng Y, Li Y, Zhou Y, et al. High-performance wearable strain sensor based on graphene/cotton fabric with high durability and low detection limit.ACS Applied Materials & Interfaces, 2020, 12(1): 1474–1485

[23] Zheng Y, Yin R, Zhao Y, et al. Conductive MXene/cotton fabric based pressure sensor with both high sensitivity and wide sensing range for human motion detection and E-skin.Chemical Engineering Journal, 2021, 420: 127720

[24] Maity D, Kumar R T R . Polyaniline anchored MWCNTs on fabric for high performance wearable ammonia sensor.ACS Sensors, 2018, 3(9): 1822–1830

[25] Aziz S, Chang S H . Smart-fabric sensor composed of single-walled carbon nanotubes containing binary polymer composites for health monitoring.Composites Science and Technology, 2018, 163: 1–9

[26] Wang S, Ning H M, Hu N, et al. Environmentally-friendly and multifunctional graphene-silk fabric strain sensor for human-motion detection.Advanced Materials Interfaces, 2020, 7(1): 1901507

[27] Chun S, Son W, Kim D W, et al. Water-resistant and skin-adhesive wearable electronics using graphene fabric sensor with octopus-inspired microsuckers.ACS Applied Materials & Interfaces, 2019, 11(18): 16951–16957

[28] Xie J, Jia Y T, Miao M H . High sensitivity knitted fabric bi-directional pressure sensor based on conductive blended yarn.Smart Materials and Structures, 2019, 28(3): 035017

[29] Ma Z H, Xu R, Wang W, et al. A wearable, anti-bacterial strain sensor prepared by silver plated cotton/spandex blended fabric for human motion monitoring.Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2019, 582: 123918

[30] Liu Z K, Li Z H, Zhai H, et al. A highly sensitive stretchable strain sensor based on multi-functionalized fabric for respiration monitoring and identification.Chemical Engineering Journal, 2021, 426: 130869

[31] Cheng K B, Ueng T H, Dixon G . Electrostatic discharge properties of stainless steel/polyester woven fabrics.Textile Research Journal, 2001, 71(8): 732–738

[32] Choi M S, Ashdown S P . Effect of changes in knit structure and density on the mechanical and hand properties of weft-knitted fabrics for outerwear.Textile Research Journal, 2000, 70(12): 1033–1045

[33] Memon H, Hu D F, Wu L Y, et al. Structure, properties, and fabric applicability of sustainable paper yarn with high washing stability.Heliyon, 2024, 10(5): e27467

[34] Zhang J, Li T, Liu T, et al. Preparation of an all-natural seaweed functionalized lyocell fiber: a scalable approach from nature to fabrics.Fibers and Polymers, 2024, 25(11): 4257–4269

[35] Wang Y, Zhang P . A comparative study of polyvinylidene fluoride and polypropylene hernia meshes in creep behavior and elasticity.Textile Research Journal, 2014, 84(14): 1558–1566

[36] Yan W J, Fuh H R, Lv Y H, et al. Giant gauge factor of Van der Waals material based strain sensors.Nature Communications, 2021, 12(1): 2018

[37] Ou J, Xie J, Jia Y . Structural design and electrical characteristics of wearable and flexible stainless steel/polyester fibre mixture.Fibers and Polymers, 2021, 22(3): 854–861

[38] Min J, Hu J, Sun C, et al. Fabrication processes of metal-fiber reinforced polymer hybrid components: a review.Advanced Composites and Hybrid Materials, 2022, 5(2): 651–678

[39] Lam N Y K, Tan J, Toomey A, et al. Washability and abrasion resistance of illuminative knitted e-textiles with POFs and silver-coated conductive yarns.Fashion and Textiles, 2022, 9(1): 39

[40] Ruppert-Stroescu M, Balasubramanian M . Effects of stitch classes on the electrical properties of conductive threads.Textile Research Journal, 2018, 88(21): 2454–2463

[41] Liu S, Yang C, Zhao Y, et al. The impact of float stitches on the resistance of conductive knitted structures.Textile Research Journal, 2016, 86(14): 1455–1473

[42] Hu H, Wang Z Y, Liu S . Development of auxetic fabrics using flat knitting technology.Textile Research Journal, 2011, 81(14): 1493–1502

[43] Atalay O, Kennon W R, Demirok E . Weft-knitted strain sensor for monitoring respiratory rate and its electro-mechanical modeling.IEEE Sensors Journal, 2015, 15(1): 110–122

[44] Arruda L M, Moreira I P, Sanivada U K, et al. Development of piezoresistive sensors based on graphene nanoplatelets screen-printed on woven and knitted fabrics: optimisation of active layer formulation and transversal/longitudinal textile direction.Materials, 2022, 15(15): 5185

[45] Seyedin S, Moradi S, Singh C, et al. Continuous production of stretchable conductive multifilaments in kilometer scale enables facile knitting of wearable strain sensing textiles.Applied Materials Today, 2018, 11: 255–263

[46] Li S, Liu G D, Li R, et al. Contact-resistance-free stretchable strain sensors with high repeatability and linearity.ACS Nano, 2022, 16(1): 541–553

[47] Liu S. A study of the influence of different structures on resistivity of conductive knitted fabrics. Dissertation for the Doctoral Degree. Hong Kong: The Hong Kong Polytechnic University, 2017

RIGHTS & PERMISSIONS

Higher Education Press