Similitude design for the vibration problems of plates and shells: A review

Abstract

Similitude design plays a vital role in the analysis of vibration and shock problems encountered in large engineering equipment. Similitude design, including dimensional analysis and governing equation method, is founded on the dynamic similitude theory. This study reviews the application of similitude design methods in engineering practice and summarizes the major achievements of the dynamic similitude theory in structural vibration and shock problems in different fields, including marine structures, civil engineering structures, and large power equipment. This study also reviews the dynamic similitude design methods for thin-walled and composite material plates and shells, including the most recent work published by the authors. Structure sensitivity analysis is used to evaluate the scaling factors to attain accurate distorted scaling laws. Finally, this study discusses the existing problems and the potential of the dynamic similitude theory for the analysis of vibration and shock problems of structures.

Graphical abstract

Keywords

review / dynamic / similitude / vibration / model test

References

[1] Harris H G, Sabnis G. Structural Modeling and Experimental Techniques. Boca Raton: CRC Press, 1999

[2] Ramu M, Prabhu R V, Thyla P R. Development of structural similitude and scaling laws for elastic models. Thematic Orientation of the Journal Manufacturing Engineering, 2011, 67–69

[3] Simitses G J, Starnes Jr J H, Rezaeepazhand J. Structural similitude and scaling laws for plates and shells: A review. In: Durban D, Givoli D, Simmonds J G, eds. Advances in the Mechanics of Plates and Shells. Springer Netherlands, 2001, 295–310

[4] Bažant Z P. Size effect on structural strength: A review. Archive of Applied Mechanics, 1999, 69(9 – 10): 703–725

[5] Bažant Z P. Size effect. International Journal of Solids and Structures, 2000, 37(1 – 2): 69–80

[6] Galilei G, Weston J. Mathematical Discourses Concerning Two New Sciences Relating to Mechanicks and Local Motion : In Four Dialogues. Printed for John Hooke, at the Flower-de-Luce Against St. Dunstan’s Church in Fleet-Street. London, 1730

[7] Buckingham E. On physically similar systems, illustrations of the use of dimensional equations. Physical Review, 1914, 4(4): 345–376

[8] Dieterich J S. Scale Models in Engineering Fundamental and Applications. Oxford: Pergamon Press, 1977

[9] Birkhoff G. Mathematics for engineers—III: Dimensional analysis of partial differential equations. Electrical Engineering, 1948, 67(12): 1185–1188

[10] Langhaar H L. Dimensional Analysis and Theory of Models. New York: John Wiley & Sons, Inc., 1951

[11] Buckingham E. The principle of similitude. Nature, 1915, 96: 396–397

[12] Goodier J N. Dimensional Analysis. New York: John Wiley & Sons, Inc., 1950, 1035–1045

[13] Wissmann J W. Dynamic Stability of Space Vehicles Structural Dynamics Model Testing. National Aeronautics and Space Administration Technical Report NASA CR-1195. 1968

[14] Macagno E O. Historico-critical review of dimensional analysis. Journal of the Franklin Institute, 1971, 292(6): 391–402

[15] Szues E. Similitude and Modeling. Elsevier, 2012

[16] David F W, Butterworths N H. Experimental Modeling in Engineering. Elsevier, 2013

[17] Wissmann J W. Dynamic Stability of Space Vehicles Structural Dynamics Model Testing. National Aeronautics and Space Administration Technical Report NASA CR-1195. 1968

[18] Krayterman B, Sabnis G M. Similitude theory: Plates and shells analysis. Journal of Engineering Mechanics, 1984, 110(9): 1247–1263

[19] Torkamani S, Jafari A A, Navazi H M. Scaled down models for free vibration analysis of orthogonally stiffened cylindrical shells using similitude theory. In: Proceedings of 26th Congress of International Council of the Aeronautical Sciences. 2008

[20] Torkamani S, Navazi H M, Jafari A A, Structural similitude in free vibration of orthogonally stiffened cylindrical shells. Thin-walled Structures, 2009, 47(11): 1316–1330

[21] Ramu M, Prabhu Raja V, Thyla P R. Establishment of structural similitude for elastic models and validation of scaling laws. KSCE Journal of Civil Engineering, 2013, 17(1): 139–144

[22] Kline S J. Similitude and Approximation Theory. New York: McGraW-Hill, 1965

[23] Szücs E. Fundamental Studies in Engineering (II), Similitude and Modeling. Amsterdam: Elsevier, 1980, 138

[24] Wu J J. Dynamic analysis of a rectangular plate under a moving line load using scale-beams and scaling laws. Composite Structures, 2005, 83(19 – 20): 1646–1658

[25] Morton J. Scaling of impact loaded carbon-fibre composites. AIAA Journal, 1988, 26(8): 989–994

[26] Simitses G J, Rezaeepazhand J. Structural Similitude and Scaling Laws for Laminated Beam-plates. NASA Technical Report NASA-CR-190585. 1992

[27] Kure K. Model tests with ocean structures. Applied Ocean Research, 1981, 3(4): 171–176

[28] Adrezin R, Bar-Avi P, Benaroya H. Dynamic response of compliant offshore structures—Review. Journal of Aerospace Engineering, 1996, 9(4): 114–131

[29] Vassalos D. Physical modelling and similitude of marine structures. Ocean Engineering, 1998, 26(2): 111–123

[30] Winsor F. Evaluation of methods to remove inertial force from measured model wave impact force signals. Ocean Engineering, 2003, 30(1): 47–84

[31] Asgarian B, Mohebbinejad A, Soltani R H. Simplified method to assess dynamic response of jacket type offshore platforms subjected to wave loading. In: Proceedings of ASME 2004 23rd International Conference on Offshore Mechanics and Arctic Engineering. Vancouver, 2004, 685–692

[32] Ou J, Long X, Li Q, Vibration control of steel jacket offshore platform structures with damping isolation systems. Engineering Structures, 2007, 29(7): 1525–1538

[33] Elshafey A A, Haddara M R, Marzouk H. Dynamic response of offshore jacket structures under random loads. Marine Structures, 2009, 22(3): 504–521

[34] Sutherland L S, Guedes Soares C. Scaling of impact on low fibre-volume glass-polyester laminates. Composites Part A: Applied Science and Manufacturing, 2007, 38(2): 307–317

[35] Bachynski E E, Motley M R, Young Y L. Dynamic hydroelastic scaling of the underwater shock response of composite marine structures. Journal of Applied Mechanics, 2012, 79(1): 014501–0145 07

[36] Aguiar de Souza V, Kirkayak L, Suzuki K, Experimental and numerical analysis of container stack dynamics using a scaled model test. Ocean Engineering, 2012, 39: 24–42

[37] Wang S, Yang D, Liu N. Investigation of acoustic scale effects and boundary effects for the similitude model of underwater complex shell-structure. Journal of Marine Science and Application, 2007, 6(1): 31–35

[38] Sato J A, Vecchio F J, Andre H M. Scale-model testing of reinforced concrete under impact loading conditions. Canadian Journal of Civil Engineering, 1989, 16(4): 459–466

[39] Kim N S, Lee J H, Chang S P. Equivalent multi-phase similitude law for pseudo-dynamic test on small scale reinforced concrete models. Engineering Structures, 2009, 31(4): 834–846

[40] Pototzky A S. Scaling laws applied to a modal formulation of the aero servo elastic equations. In: Proceedings of 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Denver, 2002 1–11

[41] Jordan T L, Hutchinson M A, Watkins V E, National Aeronautics and Space Administration Langley Research Center’s design criteria for small unmanned aerial vehicle development. 2007.

[42] Hunt G K. Similarity Requirements for Aero-elastic Models of Helicopter Rotors. Aeronautical Research Council CP 1245. 1973

[43] Ghee T A, Kelley H L. Exploratory Flow Visualization Investigation of Mast-mounted Sights in Presence of a Rotor. NASA Technical Report NASA-TM-4634. 1995

[44] Wereley N M, Kamath G M. Bringing relevance to freshman aerospace engineering: Demonstration of a model scale Comanche helicopter lag mode damper. International Journal of Engineering Education, 1997, 13(5): 369–375

[45] Singleton J D, Yeager W T. Important scaling parameters for testing model-scale helicopter rotors. Journal of Aircraft, 2000, 37(3): 396–402

[46] Mixson J S, Catherine J J. Comparison of Experimental Vibration Characteristics Obtained from a 1/5-scale Model and from a Full-scale Saturn sa-1. NASA Technical Report NASA-TN-D-2215. 1964

[47] Kunz P J. Aerodynamics and design for ultra-low Reynolds number flight. Dissertation for the Doctoral Degree. Palo Alto: Stanford University, 2003

[48] Cagliostro D J, Florence A L, Abrahamson G R. Scale modelling in LMFBR safety. Nuclear Engineering and Design, 1979, 55(2): 235–247

[49] Quercetti T, Müller K, Schubert S. Comparison of experimental results from drop testing of spent fuel package design using full scale prototype model and reduced scale model. Packaging, Transport, Storage & Security of Radioactive Material, 2008, 19(4): 197–202

[50] Aquaro D, Zaccari N, Di Prinzio M, Numerical and experimental analysis of the impact of a nuclear spent fuel cask. Nuclear Engineering and Design, 2010, 240(4): 706–712

[51] Torkamani S, Navazi H M, Jafari A A, et al. Structural similitude in free vibration of orthogonally stiffened cylindrical shells. Thin-walled Structures, 2009, 47(11): 1316–1330

[52] Simitses G J. Buckling of moderately thick laminated cylindrical shells: A review. Composites Part B: Engineering, 1996, 27(6): 581–587

[53] Rezaeepazhand J, Simitses G J. Use of scaled-down models for predicting vibration response of laminated plates. Composite Structures, 1995, 30(4): 419–426

[54] Simitses G J. Structural similitude for flat laminated surfaces. Composite Structures, 2001, 51(2): 191–194

[55] Simitses G J, Rezaeepazhand J. Structural similitude and scaling laws for buckling of cross-ply laminated plates. Journal of Thermoplastic Composite Materials, 1995, 8(3): 240–251

[56] Singhatanadgid P, Ungbhakorn V. Scaling laws for vibration response of anti-symmetrically laminated plates. Structural Engineering and Mechanics, 2002, 14(3): 345–364

[57] Ungbhakorn V, Singhatanadgid P. Similitude invariants and scaling laws for buckling experiments on anti-symmetrically laminated plates subjected to biaxial loading. Composite Structures, 2003, 59(4): 455–465

[58] Rezaeepazhand J, Wisnom M R. Scaled models for predicting buckling of delaminated orthotropic beam-plates. Composite Structures, 2009, 90(1): 87–91

[59] Rezaeepazhand J, Yazdi A A. Similitude requirements and scaling laws for flutter prediction of angle-ply composite plates. Composites Part B: Engineering, 2011, 42(1): 51–56

[60] Yazdi A A, Rezaeepazhand J. Structural similitude for flutter of delaminated composite beam-plates. Composite Structures, 2011, 93(7): 1918–1922

[61] Singhatanadgid P, Ungbhakorn V. Scaling laws for vibration response of anti-symmetrically laminated plates. Structural Engineering and Mechanics, 2002, 14(3): 345–364

[62] Wu J J. The complete-similitude scale models for predicting the vibration characteristics of the elastically restrained flat plates subjected to dynamic loads. Journal of Sound and Vibration, 2003, 268(5): 1041–1053

[63] Wu J J. Prediction of the dynamic characteristics of an elastically supported full-size flat plate from those of its complete-similitude scale model. Composite Structures, 2006, 84(3 – 4): 102–114

[64] Frostig Y, Simitses G J. Similitude of sandwich panels with a ‘soft’ core in buckling. Composites Part B: Engineering, 2004, 35(6 – 8): 599–608

[65] Shokrieh M M, Askari A. Similitude study of impacted composite laminates under buckling loading. Journal of Engineering Mechanics, 2013, 139(10): 1334–1340

[66] Rezaeepazhand J, Simitses G J, Starnes J H Jr. Scale models for laminated cylindrical shells subjected to axial compression. Composite Structures, 1996, 34(4): 371–379

[67] Rezaeepazhand J, Simitses G J. Design of scaled down models for predicting shell vibration response. Journal of Sound and Vibration, 1996, 195(2): 301–311

[68] Rezaeepazhand J, Simitses G J. Structural similitude for vibration response of laminated cylindrical shells with double curvature. Composites Part B: Engineering, 1997, 28(3): 195–200

[69] Ungbhakorn V, Singhatanadgid P. Similitude and physical modeling for buckling and vibration of symmetric cross-ply laminated circular cylindrical shells. Journal of Composite Materials, 2003, 37(19): 1697–1712

[70] Ungbhakorn V, Wattanasakulpong N. Structural similitude and scaling laws of anti-symmetric cross-ply laminated cylindrical shells for buckling and vibration experiments. International Journal of Structural Stability and Dynamics, 2007, 07(04): 609–627

[71] Chouchaoui C S, Ochoa O O. Similitude study for a laminated cylindrical tube under tension, torsion, bending, internal and external pressure. Part I: Governing equations. Composite Structures, 1999, 44(4): 221–229

[72] Chouchaoui C S, Parks P, Ochoa O O. Similitude study for a laminated cylindrical tube under tension, torsion, bending, internal and external pressure. Part II: Scale models. Composite Structures, 1999, 44(4): 231–236

[73] Derisi B, Hoa S, Hojjati M. Similitude study on bending stiffness and behavior of composite tubes. Journal of Composite Materials, 2012, 46(21): 2695–2710

[74] Yazdi A A. Prediction flutter boundaries of laminated cylindrical shells using scaling laws. Journal of Aerospace Engineering, 2014, 27(1): 86–92

[75] Qin G, Duan H, Luo Z, Similitude analysis on mechanical parameters of thin walled shells. Advanced Engineering Forum, 2011, 2–3: 936–941

[76] Wen H M, Jones N. Experimental investigation of the scaling laws for metal plates struck by large masses. International Journal of Impact Engineering, 1993, 13(3): 485–505

[77] Drazetic P, Ravalard Y, Dacheux F, Applying non-direct similitude technique to the dynamic bending collapse of rectangular section tubes. International Journal of Impact Engineering, 1994, 15(6): 797–814

[78] Oshiro R E, Alves M. Scaling impacted structures. Archive of Applied Mechanics, 2004, 74(1 – 2): 130–145

[79] Alves M, Oshiro R E. Scaling impacted structures when the prototype and the model are made of different materials. International Journal of Solids and Structures, 2006, 43(9): 2744–2760

[80] Oshiro R E, Alves M. Scaling of cylindrical shells under axial impact. International Journal of Impact Engineering, 2007, 34(1): 89–103

[81] Oshiro R E, Alves M. Predicting the behaviour of structures under impact loads using geometrically distorted scaled models. Journal of the Mechanics and Physics of Solids, 2012, 60(7): 1330–1349

[82] Trimiño L F, Cronin D S. Non-direct similitude technique applied to the dynamic axial impact of bonded crush tubes. International Journal of Impact Engineering, 2014, 64: 39–52

[83] Luo Z, Zhu Y, Zhao X, Determination method of dynamic distorted scaling laws and applicable structure size intervals of a rotating thin-wall short cylindrical shell. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2015, 229(5): 806–817

[84] Luo Z, Wang Y, Zhu Y, The dynamic similitude design method of thin walled structures and experimental validation. Shock and Vibration, 2016, 2016(2016): 1–11

[85] Luo Z, Zhu Y, Chen X, Determination method of the structure size intervals of dynamic distorted model of elastic cantilever thin plate. Advances in Mechanical Engineering, 2014, 6(8): 203–212

[86] Luo Z, Zhang K, Han Q, Similarity design method of test model of thin-walled short cylindrical shell with complex annular labyrinth. Journal of Mechanical Engineering, 2013, 49(21): 132–139 (in Chinese)

[87] Luo Z, Zhu Y, Wang Y, Study of the structure size interval of incomplete geometrically similitude model of the elastic thin plates. Journal of Measurements in Engineering, 2013, 1(4): 207–218

[88] Luo Z, Zhu Y, Chen X, Study of the structure size interval of similar test model of the laminated composite plate. Journal of Mechanical Engineering, 2013, 33(6): 870–874 (in Chinese)

[89] Luo Z, Zhao X, Zhu Y, Determination method of the structure size interval of dynamic similar models for predicting vibration characteristics of the isotropic sandwich plates. Journal of Vibroengineering, 2014, 16(2): 608–622

[90] Zhu Y, Luo Z, Zhao X, Determination method of the structure size interval of dynamic similar models for predicting vibration characteristics of the coated thin plates. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2015, 229(1): 59–68

[91] Luo Z, Wang Y, Zhu Y, The similitude design method of thin-walled annular plates and determination of structural size intervals. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2016, 230(13): 2158–2168

[92] Luo Z, Wang Y, Zhai J, Accurate prediction approach of dynamic characteristics for a rotating thin walled annular plate considering the centrifugal stress requirement. Journal of Vibroengineering, 2016, 18(5): 3104–3116

[93] Luo Z, Zhu Y, Liu H, Dynamic similitude design method of the distorted model on variable thickness cantilever plates. Applied Sciences, 2016, 6(8): 228–235

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg