Noise and vibration of hydraulic piston pump/motor: recent advances and upcoming technologies

Yijie Zhou , Yiman Duan , Kou Du , Yu Fang , Shaogan Ye , Junhui Zhang , Chao Zhang , Bing Xu , Huayong Yang

ENG. Mech. Eng. ›› 2026, Vol. 21 ›› Issue (5) : 100903

PDF (9366KB)
ENG. Mech. Eng. ›› 2026, Vol. 21 ›› Issue (5) :100903 DOI: 10.1007/s11465-026-0903-5
REVIEW ARTICLE
Noise and vibration of hydraulic piston pump/motor: recent advances and upcoming technologies
Author information +
History +
PDF (9366KB)

Abstract

Hydraulic piston pumps/motors play a key role in aerospace, navigation, engineering machinery, metallurgical engineering, and other fields due to their excellent performance, such as high power density and reliability. However, hydraulic piston pumps/motors will generate excessive noise and vibration due to their unique structure and working principle, adversely affecting the environment and equipment performance. There has been a lack of systematic analysis and summary of hydraulic piston pumps/motors’ noise and vibration. This work provides an overview of studies on the generation mechanism, reduction methods, numerical calculation methods, and testing methods for hydraulic piston pumps/motors’ noise and vibration. Finally, based on previous research results, this paper proposes upcoming technologies for hydraulic piston pumps/motors’ noise and vibration. In summary, this review paper aims to promote the development of related research and achieve a more effective reduction of the hydraulic piston pumps/motors’ noise and vibration.

Graphical abstract

Keywords

hydraulic piston pump/motor / noise and vibration / generation mechanism / reduction methods / numerical calculation methods / testing methods

Cite this article

Download citation ▾
Yijie Zhou, Yiman Duan, Kou Du, Yu Fang, Shaogan Ye, Junhui Zhang, Chao Zhang, Bing Xu, Huayong Yang. Noise and vibration of hydraulic piston pump/motor: recent advances and upcoming technologies. ENG. Mech. Eng., 2026, 21 (5) : 100903 DOI:10.1007/s11465-026-0903-5

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Lai Z X , Pan Y , Bin G F , Rong Q S , Zhou P . Vibration and noise reduction of axial piston pump based on negative capacitance piezoelectric phononic crystal structure. Physics of Fluids, 2025, 37(4): 047121

[2]

Xiao Y J , Sun Z Y , Sun G Z , Wan L R . Numerical study on dynamic response of double drive shafts of dual-coupled axial piston pump under various load ratios. Engineering Failure Analysis, 2024, 163: 108558

[3]

Nie S L , Guo M , Yin F L , Ji H , Ma Z H , Hu Z , Zhou X . Research on fluid-structure interaction for piston/cylinder tribopair of seawater hydraulic axial piston pump in deep-sea environment. Ocean Engineering, 2021, 219: 108222

[4]

Bergada J M, Kumar S, Watton J. Axial piston pumps, new trends and development. In: Gomez-Ramirez A S, Diaz J C E (eds). Hydraulics: Fluid Dynamics, Mechanical Applications and Role in Engineering. New York: Nova Publishers, 2012, 1–158.

[5]

Li Y , Cui X S , Zhang J. . A study on improving friction and wear performance of bearing bush in radial piston hydraulic motor.. Wear, 2024, 546–547: 205317

[6]

Tang S N , Cheong Khoo B , Zhu Y , Meng Lim K , Yuan S Q . A light deep adaptive framework toward fault diagnosis of a hydraulic piston pump. Applied Acoustics, 2024, 217: 109807

[7]

Tang S N , Zhu Y , Yuan S Q . A novel adaptive convolutional neural network for fault diagnosis of hydraulic piston pump with acoustic images. Advanced Engineering Informatics, 2022, 52: 101554

[8]

Syrkin V V , Galuza Y F , Abramova I A , Treyer V A . Investigation of the modes of motion of a hydraulic drive with axial-piston hydraulic motors at low speeds. Journal of Physics: Conference Series, 2021, 1901(1): 012126

[9]

Wu C J , Jiao Z X , Xu Y Z , Li C J , Liu Q X , Wu S D . Active control method for fluid borne noise in aerospace fluid systems of variable operation statuses. Mechanical Systems and Signal Processing, 2024, 214: 111375

[10]

Tan L , Xie H B , Xiao G , Tang H R , Sun S B , Yang H Y . A pressure compensation method and its application in cavitation suppression of swash plate axial piston pump. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2025, 239(6): 1893–1916

[11]

Hou J Y , Sun H Y , Xu A Y , Gong Y J , Ning D Y. . Fault diagnosis of synchronous hydraulic motor based on acoustic signals.. Advances in Mechanical Engineering, 2020, 12(4): 168781402091610

[12]

Sun Y P , Sun H L , Zhang W , Wang H , Yang J . Hybrid active control of fluid-borne sound and structure-borne sound in liquid-filled pipe system. Acta Acustica, 2019, 44(4): 780–787

[13]

Johnston D N . Measurement and prediction of the fluid borne noise characteristics of hydraulic components and systems. Doctoral Dissertation, 1987,

[14]

Lv F R , Wang N N , He S Y , Gao M . Numerical simulation of structure-borne noise in a T-shaped tee considering fluid–structure interaction. Physics of Fluids, 2023, 35(1): 015127

[15]

Waitschat A, Nordmann L, Thielecke F, Pommier-Budinger V. Enhanced toolbox for the combined analysis of fluid-and structure-borne noise of hydraulic systems. In: BATH/ASME 2016 Symposium on Fluid Power and Motion Control. Bath: ASME, 2016

[16]

Wang D W , Zhao B H , Wei Y , Yang J , Hu G K . Material design for hydraulic silencers. Physical Review Applied, 2024, 22(3): 034010

[17]

Hubballi B, Sondur V. Noise control in oil hydraulic system. In: Proceedings of 2017 International Conference on Hydraulics and Pneumatics–HERVEX. Băile Govora: Hydraulics and Pneumatics Research Institute, 2017

[18]

Gangipamula R , Ranjan P , Patil R S . Comparative studies on air borne noise and flow induced noise of a double suction centrifugal pump. Applied Acoustics, 2023, 202: 109148

[19]

Sreenivasan K R . Fluid turbulence. Reviews of Modern Physics, 1999, 71(2): S383–S395

[20]

Zhang S J , Yu J J , To S , Xiong Z W . A theoretical and experimental study of spindle imbalance induced forced vibration and its effect on surface generation in diamond turning. International Journal of Machine Tools and Manufacture, 2018, 133: 61–71

[21]

Zhao B , Guo W W , Quan L . Cavitation of a submerged jet at the spherical valve plate/cylinder block interface for axial piston pump. Chinese Journal of Mechanical Engineering, 2020, 33(1): 67

[22]

Ye S G , Zhang J H , Xu B . Noise reduction of an axial piston pump by valve plate optimization. Chinese Journal of Mechanical Engineering, 2018, 31(1): 57

[23]

Pan Y , Zhang D , Wang Z N , Zou X , Yuan H . Flow pulsation characteristics of variable displacement piston pump considering coupling effects cavitation bubble and swash plate inclination angle vibration. Physics of Fluids, 2024, 36(5): 056130

[24]

Zhang Z T , Cao S P , Wang H W , Luo X H , Deng J , Zhu Y Q . The approach on reducing the pressure pulsation and vibration of seawater piston pump through integrating a group of accumulators. Ocean Engineering, 2019, 173: 319–330

[25]

Ye S G , Zhang J H , Xu B , Song W , Chen L , Shi H Y , Zhu S Q . Experimental and numerical studies on erosion damage in damping holes on the valve plate of an axial piston pump. Journal of Mechanical Science and Technology, 2017, 31(9): 4285–4295

[26]

Chao Q , Xu Z , Tao J F , Liu C L . Capped piston: a promising design to reduce compressibility effects, pressure ripple and cavitation for high-speed and high-pressure axial piston pumps. Alexandria Engineering Journal, 2023, 62: 509–521

[27]

Kollek W , Kudźma Z , Stosiak M , Mackiewicz J . Possibilities of diagnosing cavitation in hydraulic systems. Archives of Civil and Mechanical Engineering, 2007, 7(1): 61–73

[28]

Tsukiji T, Nakayama K, Saito K, Yakabe S. Study on the cavitating flow in an oil hydraulic pump. In: 2011 International Conference on Fluid Power and Mechatronics. Beijing: IEEE, 2011, 253–258

[29]

Xu B , Ye S G , Zhang J H , Zhang C F . Flow ripple reduction of an axial piston pump by a combination of cross-angle and pressure relief grooves: Analysis and optimization. Journal of Mechanical Science and Technology, 2016, 30(6): 2531–2545

[30]

Huang H , Zhang Z , Li Z C , Li Y Z , Lin X F , Huang Q F , Sun J P . Noise reduction of axial piston motors using multi-objective optimization of reinforcing ribs based on identification of acoustic sources. Applied Acoustics, 2024, 222: 110044

[31]

Wang H H , Lin N M , Yuan S , Liu Z Q , Yu Y , Zeng Q F , Fan J F , Li D Y , Wu Y C . Structural improvement, material selection and surface treatment for improved tribological performance of friction pairs in axial piston pumps: A review. Tribology International, 2024, 198: 109838

[32]

Edge K A , Darling J . The pumping dynamics of swash plate piston pumps. Journal of Dynamic Systems, Measurement, and Control, 1989, 111(2): 307–312

[33]

Ivantysynova M, Seeniraj G K, Huang C. Comparison of different valve plate designs focusing on oscillating forces and flow pulsation. In: 9th Scandinavian International Conference on Fluid Power. Linköping: Linkoping University, 2005

[34]

Edge K A , Darling J . Cylinder pressure transients in oil hydraulic pumps with sliding plate valves. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1986, 200(1): 45–54

[35]

Ma J E , Fang Y T , Xu B , Yang H Y . Optimization of cross angle based on the pumping dynamics model. Journal of Zhejiang University Science A, 2010, 11(3): 181–190

[36]

Kim J K , Kim H E , Jung J Y , Oh S H , Jung S H . Relation between pressure variations and noise in axial type oil piston pumps. KSME International Journal, 2004, 18(6): 1019–1025

[37]

Mandal N P , Saha R , Sanyal D . Effects of flow inertia modelling and valve-plate geometry on swash-plate axial-piston pump performance. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2012, 226(4): 451–465

[38]

Yin F L , Nie S L , Hou W , Xiao S H . Effect analysis of silencing grooves on pressure and vibration characteristics of seawater axial piston pump. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017, 231(8): 1390–1409

[39]

Pettersson M. Design of fluid power piston pumps: with special reference to noise reduction. Linköping: Linköping University, 1995

[40]

Manring N D . Valve-plate design for an axial piston pump operating at low displacements. Journal of Mechanical Design, 2003, 125(1): 200–205

[41]

Song Y C , Xu B , Yang H Y. . Study on effect of relief groove angle expressing the position in reducing noise of swash plate axial piston pump.. Advanced Materials Research, 2011, 311–313: 2215–2224

[42]

Seeniraj G K, Ivantysynova M. Noise reduction in axial piston machines based on multi-parameter optimization. In: Proceedings of the 4th FPNI PhD Symposium. Sarasota, 2006

[43]

Seeniraj G K, Ivantysynova M. Impact of valve plate design on noise, volumetric efficiency and control effort in an axial piston pump. In: Proceedings of ASME 2006 International Mechanical Engineering Congress and Exposition. Chicago: ASME, 2007, 77–84

[44]

Seeniraj G K , Ivantysynova M . Multi-objective optimization tool for noise reduction in axial piston machines. Proceedings of Commercial Vehicle Engineering Congress & Exhibition 2004, 2008, 544–552

[45]

Seeniraj G K , Ivantysynova M . A multi-parameter multi-objective approach to reduce pump noise generation. International Journal of Fluid Power, 2011, 12(1): 7–17

[46]

Koivula T. On cavitation in fluid power. In: Proceedings of the 1st FPNI-PhD Symposium Hamburg 2000. Hamburg: [s.n.], 2000, 371–382

[47]

Wang S . The analysis of cavitation problems in the axial piston pump. Journal of Fluids Engineering, 2010, 132(7): 074502

[48]

Guan C B , Jiao Z X , He S Z . Theoretical study of flow ripple for an aviation axial-piston pump with damping holes in the valve plate. Chinese Journal of Aeronautics, 2014, 27(1): 169–181

[49]

Johansson A, Palmberg J O. The importance of suction port timing in axial piston pumps. In: Proceedings of the 9th Scandinavian International Conference on Fluid Power. Linköping: Linköping Universitet, 2005

[50]

Pettersson M E , Weddfelt K G , Palmberg J O S . Methods of reducing flow ripple from fluid power pumps − a theoretical approach. Proceedings of International Off-Highway & Powerplant Congress & Exposition, 1991,

[51]

Pettersson M, Weddfelt K, Palmberg J O. Reduction of flow ripple from fluid power piston machines by means of a precompression filter volume. In: Proceedings of 10th Aachen Colloquium on Fluid Power Technology. Aachen: [s.n.], 1992

[52]

Weddfelt K G , Pettersson M E , Palmberg J O S . Methods of reducing flow ripple from fluid power piston pumps − An experimental approach. Proceedings of International Off-Highway & Powerplant Congress & Exposition, 1991,

[53]

Johansson A, Palmberg J O. Quieter hydraulic systems-design considerations. Proceedings of the JFPS International Symposium on Fluid Power, 2002, 2002(5-3): 799–804

[54]

Andersson J, Palmberg J O. Design aspects for noise reduction in fluid power systems. In: Proceedings of 10th International Congress on Sound and Vibration. Stockholm: the International Institute of Acoustics and Vibration, 2003

[55]

Xu B , Song Y C , Yang H Y . Pre-compression volume on flow ripple reduction of a piston pump. Chinese Journal of Mechanical Engineering, 2013, 26(6): 1259–1266

[56]

Harris R M, Edge K A, Tilley D G. Reduction of piston pump cavitation by means of pre-expansion volume. In: Proceedings of 5th Bath International Fluid Power Workshop. Bath: University of Bath, 1992

[57]

Seeniraj G K , Zhao M M , Ivantysynova M . Effect of combining precompression grooves, PCFV and DCFV on pump noise generation. International Journal of Fluid Power, 2011, 12(3): 53–63

[58]

Helgestad B O , Foster K , Bannister F K . Pressure transients in an axial piston hydraulic pump. Proceedings of the Institution of Mechanical Engineers, 1974, 188(1): 189–199

[59]

Harrison K A , Edge K A . Reduction of axial piston pump pressure ripple. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2000, 214(1): 53–64

[60]

Andre Citroën S A . Improvements in or relating to swash-plate pumps. UK Patent No. GB908014A, ,

[61]

Johansson A, Andersson J, Palmberg J O. Optimal design of the cross-angle for pulsation reduction in variable displacement machines. In: Proceedings of Power Transmission and Motion Control. London: Professional Engineering Publishing, 2002

[62]

Andreas J, Johansson A, Palmberg J O. Influence from the crossangle on piston forces and bending moments in variable hydraulic piston pumps. In: Proceedings of 7th International Symposium on Fluid Control, Measurement and Visualization. Sorrento: [s.n.], 2003

[63]

Johansson A , Övander J , Palmberg J O . Experimental verification of cross-angle for noise reduction in hydraulic piston pumps. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 2007, 221(3): 321–330

[64]

Ericson L . On fluid power pump and motor design: tools for noise reduction. Linköping: Linköping University, 2012,

[65]

Ericson L, Ölvander J, Palmberg J O. Flow pulsation reduction for variable displacement motors using cross-angle. In: Proceedings of Power Transmission and Motion Control. Bath: Centre for Power Transmission and Motion Control, 2007

[66]

Ericson L, Ölvander J, Palmberg J O. On optimal design of hydrostatic machines. In: Proceedings of 6th International Fluid Power Conference. Dresden: Dresdner Verein zur Förderung der Fluidtechnik e.V., 2008

[67]

Ericson L, Johansson A, Ölvander J, Palmberg J O. Optimisation of structure borne noise and fluid borne noise from fluid power pumps and motors. In: Proceedings of the 11th Scandinavian Fluid Power Conference. Linköping: Linköping University, 2009

[68]

Zhang X L , Zhang J H , Zhang H J , Xu J . Optimized design of cam ring curve of cam lobe radial-piston motor. Journal of Huazhong University of Science & Technology (Nature Science Edition), 2021, 49(10): 30–35

[69]

Zhang C , Tan H , Fang Y , Zhang X L , Yang Y , Duan Y M , Han M , Cui S J , Xu B , Zhang J H . Deformation pre-compensated optimization design of cam ring for low pulsation hydraulic motors. Journal of Zhejiang University-Science A, 2023, 24(2): 130–145

[70]

Pan Y , Li Y B , Huang M H , Liao Y S , Liang D D . Noise source identification and transmission path optimisation for noise reduction of an axial piston pump. Applied Acoustics, 2018, 130: 283–292

[71]

Wang J P , Chang S , Liu G , Liu L , Wu L Y . Optimal rib layout design for noise reduction based on topology optimization and acoustic contribution analysis. Structural and Multidisciplinary Optimization, 2017, 56(5): 1093–1108

[72]

Zhang J H , Xia S Q , Ye S G , Xu B , Zhu S Q , Xiang J W , Tang H S . Experimental investigation on the sharpness reduction of an axial piston pump with reinforced shell. Applied Acoustics, 2018, 142: 36–43

[73]

Wu X D , Zhang M H , Zuo S G , Huang H D , Wu H . An investigation on interior noise reduction using 2D locally resonant phononic crystal with point defect on car ceiling. Journal of Vibration and Control, 2019, 25(2): 386–396

[74]

Liao C J , Jiang W K , Hao Duan N , Yun Wang N . Vibration and sound radiation from submerged finite cylindrical shells reinforced with axially periodic stiffeners. Journal of Vibration and Control, 2011, 17(10): 1472–1480

[75]

Xiang P J , Yan L , Xiao H Y , He X H , Du N N . Development of a novel radial-flux machine with enhanced torque profile employing quasi-cylindrical PM pattern. IEEE Transactions on Energy Conversion, 2023, 38(4): 2772–2783

[76]

Xu B , Ye S G , Zhang J H . Numerical and experimental studies on housing optimization for noise reduction of an axial piston pump. Applied Acoustics, 2016, 110: 43–52

[77]

Beards C F. Structural Vibration: Analysis and Damping. London: Arnold, 1996

[78]

Zhang J H , Xia S Q , Ye S G , Xu B , Song W , Zhu S Q , Tang H S , Xiang J W . Experimental investigation on the noise reduction of an axial piston pump using free-layer damping material treatment. Applied Acoustics, 2018, 139: 1–7

[79]

Yan T , Wang K J . Application and control mechanism of thin film metamaterials in underwater sound-absorbing materials at low frequency under high hydrostatic pressure. Applied Acoustics, 2025, 231: 110535

[80]

Wu S Q , Dazel O , Gabard G , Legrain G . High-order X-FEM for the simulation of sound absorbing poro-elastic materials with coupling interfaces. Journal of Sound and Vibration, 2021, 510: 116262

[81]

Tran Q V , Perrot C , Panneton R , Hoang M T , Dejaeger L , Marcel V , Jouve M . Effect of polydispersity on the transport and sound absorbing properties of three-dimensional random fibrous structures. International Journal of Solids and Structures, 2024, 296: 112840

[82]

Pan Y , Liu R , Bin G , He X H . Vibration and noise reduction of phononic crystal structure laid on the noise transmission path of axial piston pump. Applied Acoustics, 2022, 200: 109075

[83]

Rebel. . Active liquid noise-suppressions in oil hydraulics. VDI-Z, 1977, 119: 937–943

[84]

Wang Y , Shen T S , Tan C S , Fu J , Guo S R . Research status, critical technologies, and development trends of hydraulic pressure pulsation attenuator. Chinese Journal of Mechanical Engineering, 2021, 34(1): 14

[85]

Mikota J , Reiter H . Development of a compact and tuneable vibration compensator for hydraulic systems. International Journal of Fluid Power, 2003, 4(1): 17–31

[86]

Mikota J. A novel, compact pulsation compensator to reduce pressure pulsations in hydraulic systems. In: Proceedings of ICANOV – International Conference on Noise, Acoustics and Vibration. Ottawa: World Scientific, 2001, 69–78

[87]

Marek K A , Earnhart N E , Cunefare K A . Model and analysis of a cylindrical in-line hydraulic suppressor with a solid compressible liner. Journal of Sound and Vibration, 2014, 333(24): 6312–6331

[88]

Earnhart N E , Cunefare K A . Compact Helmholtz resonators for hydraulic systems. International Journal of Fluid Power, 2012, 13(1): 41–50

[89]

Zhao H X , Zhang Q , Shi W J , Zhang Y T . Study on characteristics of the pressure pulsation attenuator with multiple lined branched blind tubes. Noise and Vibration Control, 2020, 40(3): 229–232

[90]

Ivantysyn J, Ivantysynova M. Hydrostatic Pumps and Motors: Principles, Design, Performance, Modelling, Analysis, Control and Testing. Tech Books International, 2003

[91]

Edge K . Designing quieter hydraulic systems-some recent developments and contributions. Proceedings of the JFPS International Symposium on Fluid Power, 1999, 1999(4): 3–27

[92]

Pettersson M, Weddfelt K, Palmberg J O. Prediction of structural and audible noise from axial piston pumps using transfer functions. In: 8th Bath International Fluid Power Workshop. Bath: University of Bath, 1995

[93]

Ramdén T , Krus P , Palmberg J O . Reliability and sensitivity analysis of a condition monitoring technique. Proceedings of the JFPS International Symposium on Fluid Power, 1996, 1996(3): 567–572

[94]

Du H L, Carlson D J. Fatigue life improvement of the roller swashplate bearing of an axial swashplate type piston pump. In: ASME/BATH 2014 Symposium on Fluid Power and Motion Control. Bath: ASME, 2014

[95]

Masuda K , Ohuchi H . Noise reduction of a variable piston pump with even number of cylinders. Proceedings of the JFPS International Symposium on Fluid Power, 1996, 1996(3): 91–96

[96]

Ohuchi H , Masuda K . Active noise control of a variable displacement axial piston pump with even number of cylinders. Proceedings of the JFPS International Symposium on Fluid Power, 1999, 1999(4): 79–84

[97]

Ohuchi H , Masuda K , Osada T . Noise reduction of a variable displacement axial piston pump by compensating the exciting force. Transactions of the Japan Fluid Power System Society, 2002, 33(3): 76–81

[98]

Kim T, Ivantysynova M. Active vibration/noise control of axial piston machine using swash plate control. In: ASME/BATH 2017 Symposium on Fluid Power and Motion Control. Sarasota: ASME, 2017

[99]

Pan M, Ding B C, Yuan C G, Zou J, Yang H Y. Novel integrated control of fluid-borne noise in hydraulic systems. In: BATH/ASME 2018 Symposium on Fluid Power and Motion Control. Bath: ASME, 2018

[100]

Pan M , Yuan C G , Ding B C , Plummer A . Novel integrated active and passive control of fluid-borne noise in hydraulic systems. Journal of Dynamic Systems, Measurement, and Control, 2021, 143(9): 091006

[101]

Huang X B , Yang B T . Towards novel energy shunt inspired vibration suppression techniques: principles, designs and applications. Mechanical Systems and Signal Processing, 2023, 182: 109496

[102]

Huang X B . Stochastic resonance in a piecewise bistable energy harvesting model driven by harmonic excitation and additive Gaussian white noise. Applied Mathematical Modelling, 2021, 90: 505–526

[103]

Huang X B , Yang B T . Investigation on the energy trapping and conversion performances of a multi-stable vibration absorber. Mechanical Systems and Signal Processing, 2021, 160: 107938

[104]

Huang X B . Exploiting multi-stiffness combination inspired absorbers for simultaneous energy harvesting and vibration mitigation. Applied Energy, 2024, 364: 123124

[105]

Huang X B , Wang B , Huang Z W , Hua X G , Chen Z Q . A theoretical model for a low-frequency two-stage hybrid vibration isolator with a nonlinear energy sink and a negative stiffness spring. Applied Mathematical Modelling, 2025, 142: 115948

[106]

Huang X B , Hua X G , Chen Z Q . Exploiting a novel magnetoelastic tunable bi-stable energy converter for vibration energy mitigation. Nonlinear Dynamics, 2025, 113(3): 2017–2043

[107]

Qi W H , Zhao T Y , Gao Q H , Lu J J , Cai L Q , Li Y , Yan G , Zhang W M . 3-DOF decoupled magnetic platform for optical low-frequency vibration isolation. International Journal of Mechanical Sciences, 2025, 300: 110429

[108]

Huang X B , Yang B T . Improving energy harvesting from impulsive excitations by a nonlinear tunable bistable energy harvester. Mechanical Systems and Signal Processing, 2021, 158: 107797

[109]

Teng H D , Gao X . Design and experiment of a bellows-type dynamic vibration absorber for the oil pump. Journal of Mechanical Science and Technology, 2025, 39(6): 2957–2965

[110]

Kumar S , Bergada J M . The effect of piston grooves performance in an axial piston pumps via CFD analysis. International Journal of Mechanical Sciences, 2013, 66: 168–179

[111]

Bergada J M , Haynes J M , Watton J . Leakage and groove pressure of an axial piston pump slipper with multiple lands. Tribology Transactions, 2008, 51(4): 469–482

[112]

Bergada J M , Watton J , Haynes J M , Davies D L . The hydrostatic/hydrodynamic behaviour of an axial piston pump slipper with multiple lands. Meccanica, 2010, 45(4): 585–602

[113]

Bergada J M , Watton J , Kumar S . Pressure, flow, force, and torque between the barrel and port plate in an axial piston pump. Journal of Dynamic Systems, Measurement, and Control, 2008, 130(1): 011011

[114]

Casoli P , Vacca A , Franzoni G , Berta G L . Modelling of fluid properties in hydraulic positive displacement machines. Simulation Modelling Practice and Theory, 2006, 14(8): 1059–1072

[115]

Vacca A , Klop R , Ivantysynova M . A numerical approach for the evaluation of the effects of air release and vapour cavitation on effective flow rate of axial piston machines. International Journal of Fluid Power, 2010, 11(1): 33–45

[116]

Ye S G , Zhang J H , Xu B , Song W , Zhu S Q . A hybrid lumped parameters/finite element/boundary element model to predict the vibroacoustic characteristics of an axial piston pump. Shock and Vibration, 2017, 2017(1): 3871989

[117]

Xu B , Zhang J H , Yang H Y . Simulation research on distribution method of axial piston pump utilizing pressure equalization mechanism. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013, 227(3): 459–469

[118]

Frosina E, Marinaro G, Senatore A. Experimental and numerical analysis of an axial piston pump: A comparison between lumped parameter and 3D CFD approaches. In: ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference. San Francisco: ASME, 2019

[119]

Zawawi M H , Saleha A , Salwa A , Hassan N H , Zahari N M , Ramli M Z , Muda Z C . A review: Fundamentals of computational fluid dynamics (CFD). AIP Conference Proceedings, 2018, 2030(1): 020252

[120]

Wu T , Zhang J X , Li R C , Yuan W T , Sun Q Y , Chen S , Li D R , Sun Y H . Analysis and optimization of flow field characteristics of axial piston motor based on CFD. Flow Measurement and Instrumentation, 2024, 99: 102669

[121]

Zhang B , Ma J E , Hong H C , Yang H Y , Fang Y T . Analysis of the flow dynamics characteristics of an axial piston pump based on the computational fluid dynamics method. Engineering Applications of Computational Fluid Mechanics, 2017, 11(1): 86–95

[122]

Wang R Y, Xu Y Z, Jiao Z X, Cao A R, Wan X F, Yu T. Flow ripple reduction of axial piston pump with pre-compression volume and embedded sequence valve. In: BATH/ASME 2024 Symposium on Fluid Power and Motion Control. Bath: ASME, 2024

[123]

Li C J , Jiang T , Liu C Y , Xu H R , Shi G S . Investigation of the leakage in the flow distribution pair of radial piston hydraulic motors through CFD analysis and experiments. Flow Measurement and Instrumentation, 2024, 96: 102555

[124]

Schleihs C W, Murrenhoff H. Modal analysis simulation and validation of a hydraulic motor. In: Proceedings of the 9th JFPS International Symposium on Fluid Power. Matsue: Japan Fluid Power System Society, 2014

[125]

Schleihs C, Murrenhoff H. Acoustical simulation of a hydraulic swash plate motor. In: ASME/BATH 2015 Symposium on Fluid Power and Motion Control. Chicago: ASME, 2015

[126]

Dong L Y , Shuai Z J , Yu T , Jian J , Guo Y B , Li W Y . A multi-field coupling simulation model for the centrifugal pump system. Mechanics & Industry, 2023, 24: 9

[127]

Li Y H , Ji Z L , Yang L M , Zhang P , Xu B , Zhang J H . Thermal-fluid-structure coupling analysis for valve plate friction pair of axial piston pump in electrohydrostatic actuator (EHA) of aircraft. Applied Mathematical Modelling, 2017, 47: 839–858

[128]

Ye S G , Lin Q , Zheng C L , Zhao S J , Liu H X . Dynamic modeling and vibration response analysis of an internal gear pump. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2025, 239(8): 2823–2840

[129]

Ye S G , Sun Y T , Zhang J H , Chen J , Xu B , Zhao S J , Liu H X . A new coupled dynamic model to study the vibration and lubrication characteristics of slipper/swash-plate interface in an axial piston pump. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2025, 239(8): 1026–1049

[130]

Ying P T , Tang H S , Chen L , Ren Y , Kumar A . Dynamic modeling and vibration characteristics of multibody system in axial piston pump. Alexandria Engineering Journal, 2023, 62: 523–540

[131]

Helian B B , Mustalahti P , Mattila J , Chen Z , Yao B . Adaptive robust pressure control of variable displacement axial piston pumps with a modified reduced-order dynamic model. Mechatronics, 2022, 87: 102879

[132]

Marinaro G , Frosina E , Senatore A , Stelson K A . A fast and effective method for the optimization of the valve plate of swashplate axial piston pumps. Journal of Fluids Engineering, 2021, 143(9): 091203

[133]

Kroneis M , Scheerer R , Bobach L , Bartel D . Calculation of the actuator system in swash plate axial piston machines by a coupled multibody and TEHL simulation. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2022, 236(5): 960–981

[134]

He W , Huang J H , Hao H M , Quan L , Ji S X , Zhao B . Design and analysis of a swashplate control system for an asymmetric axial piston pump. Journal of Dynamic Systems, Measurement, and Control, 2020, 142(2): 021005

[135]

Huang H , Wu G Y , Wu Y Y , Chen S M . Identification of acoustic sources for bent-axis axial piston motor under variable loads. Journal of Sound and Vibration, 2020, 468: 115063

[136]

Ye S G , Zhang J H , Xu B , Zhu S Q , Xiang J W , Tang H S . Theoretical investigation of the contributions of the excitation forces to the vibration of an axial piston pump. Mechanical Systems and Signal Processing, 2019, 129: 201–217

[137]

Ye S G , Zhang J H , Xu B , Hou L , Xiang J W , Tang H S . A theoretical dynamic model to study the vibration response characteristics of an axial piston pump. Mechanical Systems and Signal Processing, 2021, 150: 107237

[138]

ISO 4412-1:1991. Hydraulic fluid power — Test code for determination of airborne noise levels — Part 1: Pumps. Geneva: International Organization for Standardization, 1991

[139]

ISO 4412-2:1991. Hydraulic fluid power — Test code for determination of airborne noise levels — Part 2: Motors. Geneva: International Organization for Standardization, 1991

[140]

ISO 3744:2010. Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane. Geneva: International Organization for Standardization, 2010

[141]

Gong Q H , Huang H , Wu G Y , Chen S M , Du H . Analysis and application of a new noise test system for the hydraulic motor. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2019, 13(4): JAMDSM0089

[142]

Ericson L . Measurement system for hydrostatic pump flow pulsations. Linköping: Linköping University, 2005,

[143]

Bowns D E, McCandlish D. Pressure ripple propagation. In: Conference on Quiet Oil Hydraulic Systems. London: Institution of Mechanical Engineers, 1977

[144]

Bowns D E, Edge K A, Tilley D G. The assessment of pump fluid borne noise. In: Conference on Quiet Oil Hydraulics Systems. London: Institution of Mechanical Engineers, 1977, 115–125

[145]

Edge K A , Johnston D N . The ‘secondary source’ method for the measurement of pump pressure ripple characteristics part 1: description of method. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 1990, 204(1): 41–46

[146]

Johnston D N, Longmore D K. Rating of pump fluid-borne noise. In: ASME 1994 International Mechanical Engineering Congress and Exposition. Chicago: ASME, 1994

[147]

Lau K K , Edge K A , Johnston D N . Impedance characteristics of hydraulic orifices. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 1995, 209(4): 241–253

[148]

ISO 10767-1:1996. Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Precision method for pumps. Geneva: International Organization for Standardization, 1996

[149]

Larsson P, Palmberg J O, Weddfelt K. Analysis and measurement of pressure ripple of fluid power pumps. In: 8th IASTED International Symposium: Measurement, Signal Processing and Control. Taormina: ACTA Press, 1986

[150]

Weddfelt K. Measurement of pump source characteristics by the twomicrophone method. In: Proceedings of the 2nd Tampere International Conference on Fluid Power. Tampere: Tampere University of Technology, 1991

[151]

ISO 10767-1:2015. Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps. Geneva: International Organization for Standardization, 2015

[152]

Liu J H , Butts T , Suh S . Source flow ripple and source impedance measurement for different hydraulic pumps. INTER-NOISE and NOISE-CON Congress and Conference Proceedings., 2018, 4989–5999

[153]

Kojima E , Yu J H , Ichiyanagi T . Experimental determining and theoretical predicting of source flow ripple generated by fluid power piston pumps. International Off-Highway & Powerplant Congress & Exposition, 2000,

[154]

Lu Q B , Li X , Zhang X J , Lu M H , Chen Y F . Perspective: acoustic metamaterials in future engineering. Engineering, 2022, 17: 22–30

[155]

Pelat A , Gautier F , Conlon S C , Semperlotti F . The acoustic black hole: a review of theory and applications. Journal of Sound and Vibration, 2020, 476: 115316

[156]

Zhang K , Chen T N , Wang X P , Fang J L . Rheology behavior and optimal damping effect of granular particles in a non-obstructive particle damper. Journal of Sound and Vibration, 2016, 364: 30–43

[157]

Song Y , Hu Z W , Ai C . Fuzzy compensation and load disturbance adaptive control strategy for electro-hydraulic servo pump control system. Electronics, 2022, 11(7): 1159

[158]

Quan Z Y , Quan L , Zhang J M . Review of energy efficient direct pump controlled cylinder electro-hydraulic technology. Renewable and Sustainable Energy Reviews, 2014, 35: 336–346

[159]

Babikir H A , Elaziz M A , Elsheikh A H , Showaib E A , Elhadary M , Wu D F , Liu Y S . Noise prediction of axial piston pump based on different valve materials using a modified artificial neural network model. Alexandria Engineering Journal, 2019, 58(3): 1077–1087

Rights & permissions

Higher Education Press

PDF (9366KB)

0

Accesses

0

Citation

Detail

Sections
Recommended

/

〈 〉