A bibliometric analysis of the progress and trends in minimum quantity lubrication machining

Abstract

Minimum quantity lubrication (MQL) machining has gained widespread attention in both academic and industrial research fields as a beneficial technology for improving machining performance and sustainability, due to its low cost and environmental protection. Nevertheless, there is still room for improvement in MQL, such as the lack of research and analysis on the development history of MQL, key authors, and research hotspots. This may be one of the reasons limiting the development of MQL. Based on this, this paper proposes a new bibliometric analysis of MQL research, with the aim of describing current research trends and visualizing the development history and emerging trends of MQL to support researchers in conducting in-depth studies. First, a bibliometric analysis was conducted on 1842 publications related to MQL in the Web of Science (WoS) Core Collection database from 2008 to 2023. Secondly, bibliometric analysis software such as VOSviewer and bibliometrix were used to visualize the annual growth of publications, distribution of research fields, regional distribution, distribution of research institutions, author distribution, highly cited articles, and keywords. The results show that from 19 publications annually in 2008 to 292 publications annually in 2023, there has been a 15-fold increase, with India (550 publications) being the country with the most publications and China (19420 citations) having the highest number of citations. Furthermore, an analysis was conducted on the research hotspot directions represented by keyword classification, summarizing the current research achievements. This paper reveals the development trend, global cooperation pattern, basic knowledge, research hotspots, and emerging frontiers of MQL.

Graphical abstract

Keywords

minimum quantity lubrication (MQL) / MQL machining / bibliometric analysis / nanofluids / machining tool performance

References

[1] United Nations Industrial Development Organization. Industrial Development Report 2018: Demand for Manufacturing: Driving Inclusive and Sustainable Industrial Development. Vienna: United Nations Industrial Development Organization, 2017, 26–44

[2] Zhang L L , Ling J , Lin M W . Carbon neutrality: a comprehensive bibliometric analysis. Environmental Science and Pollution Research, 2023, 30(16): 45498–45514

[3] Korkmaz M E , Gupta M K , Ross N S , Sivalingam V . Implementation of green cooling/lubrication strategies in metal cutting industries: a state of the art towards sustainable future and challenges. Sustainable Materials and Technologies, 2023, 36: e00641

[4] Hu S G , Li C H , Li B K , Yang M , Wang X M , Gao T , Xu W H , Dambatta Y S , Zhou Z M , Xu P M . Digital twins enabling intelligent manufacturing: from methodology to application. Intelligent and Sustainable Manufacturing, 2024, 1(1): 10007

[5] Chen M K , Zhang Y B , Liu B , Zhou Z M , Zhang N Q , Wang H H , Wang L Q . Design of intelligent and sustainable manufacturing production line for automobile wheel hub. Intelligent and Sustainable Manufacturing, 2024, 1(1): 10003

[6] Giannetti B F , Agostinho F , Eras J J C , Yang Z F , Almeida C M V B . Cleaner production for achieving the sustainable development goals. Journal of Cleaner Production, 2020, 271: 122127

[7] Jia D Z , Li C H , Zhang Y B , Zhang D K , Zhang X W . Experimental research on the influence of the jet parameters of minimum quantity lubrication on the lubricating property of Ni-based alloy grinding. The International Journal of Advanced Manufacturing Technology, 2016, 82(1–4): 617–630

[8] Tan H , Li J L , He M , Li J Y , Zhi D , Qin F Z , Zhang C . Global evolution of research on green energy and environmental technologies: a bibliometric study. Journal of Environmental Management, 2021, 297: 113382

[9] Said Z , Gupta M , Hegab H , Arora N , Khan A M , Jamil M , Bellos E . A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids. The International Journal of Advanced Manufacturing Technology, 2019, 105(5–6): 2057–2086

[10] Sharma A K , Tiwari A K , Dixit A R . Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: a comprehensive review. Journal of Cleaner Production, 2016, 127: 1–18

[11] Wu X F , Li C H , Zhou Z M , Nie X L , Chen Y , Zhang Y B , Cao H J , Liu B , Zhang N Q , Said Z , Debnath S , Jamil M , Ali H M , Sharma S . Circulating purification of cutting fluid: an overview. The International Journal of Advanced Manufacturing Technology, 2021, 117(9–10): 2565–2600

[12] Zhou S , Wang D Z , Wu S J , Gu G Q , Dong G J , An Q L , Guo H , Li C H . Minimum quantity lubrication machining nickel base alloy: a comprehensive review. The International Journal of Advanced Manufacturing Technology, 2024, 131(5–6): 2407–2445

[13] Abraham M A (ed). Encyclopedia of Sustainable Technologies. Amsterdam: Elsevier, 2017, 477–485

[14] Duan Z J , Li C H , Zhang Y B , Dong L , Bai X F , Yang M , Jia D Z , Li R Z , Cao H J , Xu X F . Milling surface roughness for 7050 aluminum alloy cavity influenced by nozzle position of nanofluid minimum quantity lubrication. Chinese Journal of Aeronautics, 2021, 34(6): 33–53

[15] Zhang N , Yang F Z , Liu G H . Cutting performance of micro-textured WC/Co tools in the dry cutting of Ti-6Al-4V alloy. The International Journal of Advanced Manufacturing Technology, 2020, 107(9–10): 3967–3979

[16] Zhang P , Cao X , Zhang X C , Wang Y Q . Machinability and cutting force modeling of 7055 aluminum alloy with wide temperature range based on dry cutting. The International Journal of Advanced Manufacturing Technology, 2020, 111(9–10): 2787–2808

[17] Pawanr S , Gupta K . Dry machining techniques for sustainability in metal cutting: a review. Processes, 2024, 12(2): 417

[18] Liu M Z , Li C H , Zhang Y B , Yang M , Gao T , Cui X , Wang X M , Xu W H , Zhou Z M , Liu B , Said Z , Li R Z , Sharma S . Analysis of grinding mechanics and improved grinding force model based on randomized grain geometric characteristics. Chinese Journal of Aeronautics, 2023, 36(7): 160–193

[19] de Souza Ruzzi R , de Paiva R L , Gelamo R V , Machado A R , da Silva R B . Study on grinding of Inconel 625 and 718 alloys with cutting fluid enriched with multilayer graphene platelets. Wear, 2021, 476: 203697

[20] Liu M Z , Li C H , Zhang Y B , An Q L , Yang M , Gao T , Mao C , Liu B , Cao H J , Xu X F , Said Z , Debnath S , Jamil M , Ali H M , Sharma S . Cryogenic minimum quantity lubrication machining: from mechanism to application. Frontiers of Mechanical Engineering, 2021, 16(4): 649–697

[21] Sarikaya M , Gupta M K , Tomaz I , Danish M , Mia M , Rubaiee S , Jamil M , Pimenov D Y , Khanna N . Cooling techniques to improve the machinability and sustainability of light-weight alloys: a state-of-the-art review. Journal of Manufacturing Processes, 2021, 62: 179–201

[22] Yildiz Y , Nalbant M . A review of cryogenic cooling in machining processes. International Journal of Machine Tools and Manufacture, 2008, 48(9): 947–964

[23] Khan M A , Jaffery S H I , Khan M , Younas M , Butt S I , Ahmad R , Warsi S S . Statistical analysis of energy consumption, tool wear and surface roughness in machining of Titanium alloy (Ti-6Al-4V) under dry, wet and cryogenic conditions. Mechanical Sciences, 2019, 10(2): 561–573

[24] Zahoor S , Ameen F , Abdul-Kader W , Stagner J . Environmentally conscious machining of Inconel 718: surface roughness, tool wear, and material removal rate assessment. The International Journal of Advanced Manufacturing Technology, 2020, 106(1–2): 303–313

[25] Liu M Z , Li C H , Yang M , Gao T , Wang X M , Cui X , Zhang Y B , Said Z , Sharma S . Mechanism and enhanced grindability of cryogenic air combined with biolubricant grinding titanium alloy. Tribology International, 2023, 187: 108704

[26] Wang X M , Li C H , Zhang Y B , Yang M , Zhou Z M , Chen Y , Liu B , Wang D Z. . Research progress on key technology of enabled atomization and supply system of minimum quantity lubrication. Surface Technology, 2022, 51(9): 1–14

[27] Thakur A , Manna A , Samir S . Multi-response optimization of turning parameters during machining of EN-24 steel with SiC nanofluids based minimum quantity lubrication. Silicon, 2020, 12(1): 71–85

[28] He T , Liu N C , Xia H Z , Wu L , Zhang Y , Li D G , Chen Y . Progress and trend of minimum quantity lubrication (MQL): a comprehensive review. Journal of Cleaner Production, 2023, 386: 135809

[29] Li C H , Han Z L , Zhang Q , Wang S. . Modeling and experimental investigation of pressure field in the grinding zone with nanoparticle jet of MQL. Advances in Mechanical Engineering, 2013, 5: 1–11

[30] Rahim E A , Sasahara H . An analysis of surface integrity when drilling Inconel 718 using palm oil and synthetic ester under MQL condition. Machining Science and Technology, 2011, 15(1): 76–90

[31] Race A , Zwierzak I , Secker J , Walsh J , Carrell J , Slatter T , Maurotto A . Environmentally sustainable cooling strategies in milling of SA516: effects on surface integrity of dry, flood and MQL machining. Journal of Cleaner Production, 2021, 288: 125580

[32] Li C H , Zhang D K , Jia D Z , Wang S , Hou Y L . Experimental evaluation on tribological properties of nano-particle jet MQL grinding. International Journal of Surface Science and Engineering, 2015, 9(2–3): 159–175

[33] Qin S , Li Z Q , Guo G Q , An Q L , Chen M , Ming W W . Analysis of minimum quantity lubrication (MQL) for different coating tools during turning of TC11 titanium alloy. Materials, 2016, 9(10): 804

[34] Liu Z Q , Cai X J , Chen M , An Q L . Investigation of cutting force and temperature of end-milling Ti-6Al-4V with different minimum quantity lubrication (MQL) parameters. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2011, 225(8): 1273–1279

[35] Dambatta Y S , Li C H , Yang M , Beikai L I , Gao T , Liu M Z , Cui X , Wang X M , Zhang Y B , Said Z , Sharma S , Zhou Z M . Grinding with minimum quantity lubrication: a comparative assessment. The International Journal of Advanced Manufacturing Technology, 2023, 128(3–4): 955–1014

[36] Balasuadhakar A , Kumaran S T , Kurniawan R , Ahmed F . A comprehensive review on minimum quantity lubrication in turning process. Surface Review and Letters, 2022, 29(8): 2230008

[37] Jia D Z , Li C H , Zhang Y B , Yang M , Wang Y G , Guo S M , Cao H J . Specific energy and surface roughness of minimum quantity lubrication grinding Ni-based alloy with mixed vegetable oil-based nanofluids. Precision Engineering, 2017, 50: 248–262

[38] Pervaiz S , Anwar S , Qureshi I , Ahmed N . Recent advances in the machining of titanium alloys using minimum quantity lubrication (MQL) based techniques. International Journal of Precision Engineering and Manufacturing-Green Technology, 2019, 6(1): 133–145

[39] Wu W T , Li C H , Yang M , Zhang Y B , Jia D Z , Hou Y L , Li R Z , Cao H J , Han Z G . Specific energy and g ratio of grinding cemented carbide under different cooling and lubrication conditions. The International Journal of Advanced Manufacturing Technology, 2019, 105(1–4): 67–82

[40] Dambatta Y S , Sayuti M , Sarhan A A D , Hamdi M , Manladan S M , Reddy M . Tribological performance of SiO₂-based nanofluids in minimum quantity lubrication grinding of Si₃N₄ ceramic. Journal of Manufacturing Processes, 2019, 41: 135–147

[41] Makhesana M A , Patel K M , Krolczyk G M , Danish M , Singla A K , Khanna N . Influence of MoS₂ and graphite-reinforced nanofluid-MQL on surface roughness, tool wear, cutting temperature and microhardness in machining of Inconel 625. CIRP Journal of Manufacturing Science and Technology, 2023, 41: 225–238

[42] Bai X F , Li C H , Dong L , Yin Q A . Experimental evaluation of the lubrication performances of different nanofluids for minimum quantity lubrication (MQL) in milling Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology, 2019, 101(9–12): 2621–2632

[43] Lawal S A , Choudhury I A , Nukman Y . A critical assessment of lubrication techniques in machining processes: a case for minimum quantity lubrication using vegetable oil-based lubricant. Journal of Cleaner Production, 2013, 41: 210–221

[44] Yaqoob S , Ghani J A , Juri A Z , Muhamad S S , Haron C H C , Jouini N . A review of sustainable hybrid lubrication (Cryo-MQL) techniques in machining processes. The International Journal of Advanced Manufacturing Technology, 2024, 131(1): 151–169

[45] Boswell B , Islam M N , Davies I J , Ginting Y R , Ong A K . A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining. The International Journal of Advanced Manufacturing Technology, 2017, 92(1–4): 321–340

[46] Hu S G , Li C H , Zhou Z M , Liu B , Zhang Y B , Yang M , Li B K , Gao T , Liu M Z , Cui X , Wang X M , Xu W H , Dambatta Y S , Li R Z , Sharma S . Nanoparticle-enhanced coolants in machining: mechanism, application, and prospects. Frontiers of Mechanical Engineering, 2023, 18(4): 53

[47] Ellegaard O , Wallin J A. . The bibliometric analysis of scholarly production: how great is the impact?. Scientometrics, 2015, 105(3): 1809–1831

[48] Zhang Z , Hu G W , Mu X Z , Kong L . From low carbon to carbon neutrality: a bibliometric analysis of the status, evolution and development trend. Journal of Environmental Management, 2022, 322: 116087

[49] Thelwall M . Bibliometrics to webometrics. Journal of Information Science, 2008, 34(4): 605–621

[50] Ninkov A , Frank J R , Maggio L A . Bibliometrics: methods for studying academic publishing. Perspectives on Medical Education, 2021, 11(3): 173–176

[51] Geng Y Q , Xiang Q J , Gao J A , Yan Y , Li J Y . Progress and framework of clean energy production: bibliometric analysis from 2002 to 2022. Energy Strategy Reviews, 2024, 52: 101270

[52] Li K , Rollins J , Yan E J . Web of science use in published research and review papers 1997–2017: a selective, dynamic, cross-domain, content-based analysis. Scientometrics, 2018, 115(1): 1–20

[53] Mongeon P , Paul-Hus A . The journal coverage of Web of Science and Scopus: a comparative analysis. Scientometrics, 2016, 106(1): 213–228

[54] Zhu J W , Liu W S . A tale of two databases: the use of Web of Science and Scopus in academic papers. Scientometrics, 2020, 123(1): 321–335

[55] Aria M , Cuccurullo C . bibliometrix: an R-tool for comprehensive science mapping analysis. Journal of Informetrics, 2017, 11(4): 959–975

[56] Liao H C , Tang M , Luo L , Li C Y , Chiclana F , Zeng X J . A bibliometric analysis and visualization of medical big data research. Sustainability, 2018, 10(1): 166

[57] Pan X L , Yan E J , Cui M , Hua W N . Examining the usage, citation, and diffusion patterns of bibliometric mapping software: a comparative study of three tools. Journal of Informetrics, 2018, 12(2): 481–493

[58] Liu Z G , Yin Y M , Liu W D , Dunford M . Visualizing the intellectual structure and evolution of innovation systems research: a bibliometric analysis. Scientometrics, 2015, 103(1): 135–158

[59] Rodriguez A , Laio A . Clustering by fast search and find of density peaks. Science, 2014, 344(6191): 1492–1496

[60] Shibata N , Kajikawa Y , Takeda Y , Matsushima K . Detecting emerging research fronts based on topological measures in citation networks of scientific publications. Technovation, 2008, 28(11): 758–775

[61] Sasahara H , Kawasaki M , Tsutsumi M . Helical feed milling with MQL for boring of aluminum alloy. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2008, 2(6): 1030–1040

[62] Bornmann L , Mutz R . Growth rates of modern science: a bibliometric analysis based on the number of publications and cited references. Journal of the Association for Information Science and Technology, 2015, 66(11): 2215–2222

[63] Abu-Odah H , Molassiotis A , Liu J Y W . Global palliative care research (2002-2020): bibliometric review and mapping analysis. BMJ Supportive & Palliative Care, 2022, 12(4): 376–387

[64] Pallottino F , Cimini A , Costa C , Antonucci F , Menesatti P , Moresi M . Bibliometric analysis and mapping of publications on brewing science from 1940 to 2018. Journal of the Institute of Brewing, 2020, 126(4): 394–405

[65] Song R M , Li Y , Ye B X , Li G P , Zou L N . The research status and hotspots of photoelectrochemical aptasensor: a bibliometric review based on VOS viewer. Journal of the Electrochemical Society, 2023, 170(6): 067506

[66] Moshobane M C , Khoza T T , Niassy S . The period of insect research in the tropics: a bibliometric analysis. International Journal of Tropical Insect Science, 2022, 42(1): 989–998

[67] Vincini M G , Zaffaroni M , Schwarz M , Marvaso G , Mastroleo F , Volpe S , Bergamaschi L , Mazzola G C , Corrao G , Orecchia R , Jereczek-Fossa B A , Alterio D . More than five decades of proton therapy: a bibliometric overview of the scientific literature. Cancers, 2023, 15(23): 5545

[68] Xu K H , Yu S Y , Wang Z H , Zhang Z C , Zhang Z T . Bibliometric and visualized analysis of 3D printing bioink in bone tissue engineering. Frontiers in Bioengineering and Biotechnology, 2023, 11: 1232427

[69] Idamokoro E M . The relevance of livestock husbandry in the context of food security: a bibliometric outlook of research studies from 1938 to 2020. Frontiers in Sustainable Food Systems, 2023, 7: 1204221

[70] Adeniji A O , Okaiyeto K , George M J , Tanor E B , Semerjian L , Okoh A I . A systematic assessment of research trends on polycyclic aromatic hydrocarbons in different environmental compartments using bibliometric parameters. Environmental Geochemistry and Health, 2023, 45(5): 1289–1309

[71] Li J , Wu D S , Li J P , Li M L . A comparison of 17 article-level bibliometric indicators of institutional research productivity: evidence from the information management literature of China. Information Processing & Management, 2017, 53(5): 1156–1170

[72] Trianni A , Merigó J M , Bertoldi P . Ten years of energy efficiency: a bibliometric analysis. Energy Efficiency, 2018, 11(8): 1917–1939

[73] Michels C , Schmoch U . Impact of bibliometric studies on the publication behaviour of authors. Scientometrics, 2014, 98(1): 369–385

[74] Wildgaard L , Schneider J W , Larsen B . A review of the characteristics of 108 author-level bibliometric indicators. Scientometrics, 2014, 101(1): 125–158

[75] Alfaro-García V G , Merigó J M , Pedrycz W , Gómez Monge R . Citation analysis of fuzzy set theory journals: bibliometric insights about authors and research areas. International Journal of Fuzzy Systems, 2020, 22(8): 2414–2448

[76] van Leeuwen T , Costas R , Calero-Medina C , Visser M . The role of editorial material in bibliometric research performance assessments. Scientometrics, 2013, 95(2): 817–828

[77] Li C H . Revolution and challenges in machining processing aimed at carbon reduction. Frontiers of Mechanical Engineering, 2024, 19(1): 1

[78] Li C H , Zhang Y B , Said Z . Enhanced manufacture technology based on emission reduction and carbon reduction in cutting and grinding. The International Journal of Advanced Manufacturing Technology, 2024, 131(5–6): 1963–1974

[79] Li C H , Zhang Y B , Sharma S . Enhanced heat transfer technology based on emission reduction and carbon reduction in cutting and grinding. Chinese Journal of Mechanical Engineering, 2023, 36(1): 112

[80] Ohkawa K. . Prologue to the special issue on “tribology in environmentally friendly machining”. Journal of Japanese Society of Tribologists, 2008, 53(1): 3

[81] Yang M , Li C H , Zhang Y B , Jia D Z , Zhang X P , Hou Y L , Li R Z , Wang J . Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions. International Journal of Machine Tools and Manufacture, 2017, 122: 55–65

[82] Zhang Y B , Li C H , Jia D Z , Zhang D K , Zhang X W . Experimental evaluation of the lubrication performance of MoS₂/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding. International Journal of Machine Tools and Manufacture, 2015, 99: 19–33

[83] Guo S M , Li C H , Zhang Y B , Wang Y G , Li B K , Yang M , Zhang X P , Liu G T . Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy. Journal of Cleaner Production, 2017, 140: 1060–1076

[84] Zhang Y B , Li C H , Jia D Z , Zhang D K , Zhang X W . Experimental evaluation of MoS₂ nanoparticles in jet MQL grinding with different types of vegetable oil as base oil. Journal of Cleaner Production, 2015, 87: 930–940

[85] Yang M , Li C H , Zhang Y B , Jia D Z , Li R Z , Hou Y L , Cao H J , Wang J . Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions. Ceramics International, 2019, 45(12): 14908–14920

[86] Zhang J C , Li C H , Zhang Y B , Yang M , Jia D Z , Liu G T , Hou Y L , Li R Z , Zhang N Q , Wu Q D , Cao H J . Experimental assessment of an environmentally friendly grinding process using nanofluid minimum quantity lubrication with cryogenic air. Journal of Cleaner Production, 2018, 193: 236–248

[87] Zhang Y B , Li C H , Ji H J , Yang X H , Yang M , Jia D Z , Zhang X P , Li R Z , Wang J . Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms. International Journal of Machine Tools and Manufacture, 2017, 122: 81–97

[88] Li B K , Li C H , Zhang Y B , Wang Y G , Jia D Z , Yang M . Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil. Chinese Journal of Aeronautics, 2016, 29(4): 1084–1095

[89] Wang Y G , Li C H , Zhang Y B , Yang M , Li B K , Jia D Z , Hou Y L , Mao C . Experimental evaluation of the lubrication properties of the wheel/workpiece interface in minimum quantity lubrication (MQL) grinding using different types of vegetable oils. Journal of Cleaner Production, 2016, 127: 487–499

[90] Wang Y G , Li C H , Zhang Y B , Yang M , Li B K , Dong L , Wang J . Processing characteristics of vegetable oil-based nanofluid MQL for grinding different workpiece materials. International Journal of Precision Engineering and Manufacturing-Green Technology, 2018, 5(2): 327–339

[91] Barbosa W , Prado T , Batista C , Câmara J C , Cerqueira R , Coelho R , Guarieiro L . Electric vehicles: bibliometric analysis of the current state of the art and perspectives. Energies, 2022, 15(2): 395

[92] Uddin S , Khan A . The impact of author-selected keywords on citation counts. Journal of Informetrics, 2016, 10(4): 1166–1177

[93] Zhang J , Yu Q , Zheng F S , Long C , Lu Z X , Duan Z G . Comparing keywords plus of WOS and author keywords: a case study of patient adherence research. Journal of the Association for Information Science and Technology, 2016, 67(4): 967–972

[94] Deng K , Li X , Lu J H , Zhou X F . Best keyword cover search. IEEE Transactions on Knowledge and Data Engineering, 2015, 27(1): 61–73

[95] Ramanan K V , Babu S R , Jebaraj M , Ross K N S . Face turning of Incoloy 800 under MQL and nano-MQL environments. Materials and Manufacturing Processes, 2021, 36(15): 1769–1780

[96] Khanafer K , Eltaggaz A , Deiab I , Agarwal H , Abdul-Latif A . Toward sustainable micro-drilling of Inconel 718 superalloy using MQL-nanofluid. The International Journal of Advanced Manufacturing Technology, 2020, 107(7–8): 3459–3469

[97] Okafor A C , Nwoguh T O . Comparative evaluation of soybean oil-based MQL flow rates and emulsion flood cooling strategy in high-speed face milling of Inconel 718. The International Journal of Advanced Manufacturing Technology, 2020, 107(9–10): 3779–3793

[98] Debnath S , Reddy M M , Yi Q S . Environmental friendly cutting fluids and cooling techniques in machining: a review. Journal of Cleaner Production, 2014, 83: 33–47

[99] Du F L , Zhou T , Tian P F , Chen J D , Zhou X R , He L , Ren A . Cutting performance and cutting fluid infiltration characteristics into tool-chip interface during MQL milling. Measurement, 2024, 225: 113989

[100] Kuram E , Bagherzadeh A , Budak E . Application of cutting fluids in micro-milling – a review. The International Journal of Advanced Manufacturing Technology, 2024, 133(1–2): 25–58

[101] Boopathi S . An extensive review on sustainable developments of dry and near-dry electrical discharge machining processes. Journal of Manufacturing Science and Engineering, 2022, 144(5): 050801

[102] Jayal A D , Balaji A K , Sesek R , Gaul A , Lillquist D R . Machining performance and health effects of cutting fluid application in drilling of A390.0 cast aluminum alloy. Journal of Manufacturing Processes, 2007, 9(2): 137–146

[103] Madanchi N , Kurle D , Winter M , Thiede S , Herrmann C . Energy efficient process chain: the impact of cutting fluid strategies. Procedia CIRP, 2015, 29: 360–365

[104] Lopes J C , Garcia M V , Valentim M , Javaroni R L , Ribeiro F S F , de Angelo Sanchez L E , de Mello H J , Aguiar P R , Bianchi E C . Grinding performance using variants of the MQL technique: MQL with cooled air and MQL simultaneous to the wheel cleaning jet. The International Journal of Advanced Manufacturing Technology, 2019, 105(10): 4429–4442

[105] Moretti G B , de Carvalho Machado F , Winckler L , Ribeiro F S F , Talon A G , de Angelo Sanchez L E , Bianchi E C , Lopes J C . Sustainable machining practices: a comparative study of MQL and MQL with wheel cleaning jet applied to different abrasives. The International Journal of Advanced Manufacturing Technology, 2024, 132(5–6): 2395–2409

[106] Liu D W , Li C H , Xu P M , Wang W , Zhang Y B , Yang M , Cui X , Li B K , Liu M Z , Gao T , Dambatta Y S , Qin A G . SiCp/Al composites from conventional to empowered machining: mechanisms and processability. Composite Structures, 2024, 346: 118433

[107] Tawakoli T , Hadad M J , Sadeghi M H . Influence of oil mist parameters on minimum quantity lubrication – MQL grinding process. International Journal of Machine Tools and Manufacture, 2010, 50(6): 521–531

[108] Sampaio M A , Machado Á R , Laurindo C A H , Torres R D , Amorim F L . Influence of minimum quantity of lubrication (MQL) when turning hardened SAE 1045 steel: a comparison with dry machining. The International Journal of Advanced Manufacturing Technology, 2018, 98(1–4): 959–968

[109] Ofem N L . Effect of Ni-binder, pecs and MQL on face milling of Ti-6Al-4V. Materials and Manufacturing Processes, 2021, 36(15): 1807–1812

[110] Huang W T , Wu D H , Chen J T . Robust design of using nanofluid/MQL in micro-drilling. The International Journal of Advanced Manufacturing Technology, 2016, 85(9–12): 2155–2161

[111] Hadad M , Sadeghi B . Thermal analysis of minimum quantity lubrication-MQL grinding process. International Journal of Machine Tools and Manufacture, 2012, 63: 1–15

[112] Khettabi R , Nouioua M , Djebara A , Songmene V . Effect of MQL and dry processes on the particle emission and part quality during milling of aluminum alloys. The International Journal of Advanced Manufacturing Technology, 2017, 92(5–8): 2593–2598

[113] Dong L , Li C H , Zhou F M , Bai X F , Gao W , Duan Z J , Li X P , Lv X J , Zhang F B . Temperature of the 45 steel in the minimum quantity lubricant milling with different biolubricants. The International Journal of Advanced Manufacturing Technology, 2021, 113(9–10): 2779–2790

[114] Lopes J C , Talon A G , de Souza Rodrigues M , Moretti G B , de Carvalho Machado F , de Souza G G , Ribeiro F S F , de Angelo Sanchez L E , Bianchi E C . An experimental evaluation between pure and diluted MQL versus flood lubri-cooling focused on cost and environmental impact. The International Journal of Advanced Manufacturing Technology, 2023, 129(5–6): 2691–2705

[115] Gajrani K K . Assessment of cryo-MQL environment for machining of Ti-6Al-4V. Journal of Manufacturing Processes, 2020, 60: 494–502

[116] Li D H , Zhang T , Zheng T , Zhao N , Li Z . A comprehensive review of minimum quantity lubrication (MQL) machining technology and cutting performance. The International Journal of Advanced Manufacturing Technology, 2024, 133(5–6): 2681–2707

[117] Şirin Ş , Sarıkaya M , Yıldırım Ç V , Kıvak T . Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL. Tribology International, 2021, 153: 106673

[118] Gaitonde V N , Karnik S R , Davim J P . Selection of optimal MQL and cutting conditions for enhancing machinability in turning of brass. Journal of Materials Processing Technology, 2008, 204(1–3): 459–464

[119] Das R K , Sahoo A K , Kumar R , Roy S , Mishra P C , Mohanty T. . MQL assisted cleaner machining using PVD TiAlN coated carbide insert: comparative assessment. Indian Journal of Engineering & Materials Sciences, 2019, 26(5–6): 311–325

[120] Kasim M S , Haron C H C , Ghani J A , Hadi M A , Izamshah R , Anand T J S , Mohamed S B . Cost evaluation on performance of a PVD coated cutting tool during end-milling of Inconel 718 under MQL conditions. Transactions of the IMF, 2016, 94(4): 175–181

[121] Lopes J C , Ávila B N , de Souza Rodrigues M , Garcia M V , Ribeiro F S F , de Mello H J , De Angelo Sanchez L E , Aguiar P R , Bianchi E C . Grinding comparative analysis between different proportions of water-oil applied to MQL technique and industrial production cost towards a green manufacturing. The International Journal of Advanced Manufacturing Technology, 2021, 113(5–6): 1281–1293

[122] Benedicto E , Carou D , Rubio E M . Technical, economic and environmental review of the lubrication/cooling systems used in machining processes. Procedia Engineering, 2017, 184: 99–116

[123] An Q L , Cai C Y , Zou F , Liang X , Chen M . Tool wear and machined surface characteristics in side milling Ti6Al4V under dry and supercritical CO₂ with MQL conditions. Tribology International, 2020, 151: 106511

[124] Luo X C , Wu S J , Wang D Z , Yun Y X , An Q L , Li C H . Sustainable development of cutting fluids: the comprehensive review of vegetable oil. Journal of Cleaner Production, 2024, 473: 143544

[125] Jamil M , Zhao W , He N , Gupta M K , Sarikaya M , Khan A M , Sanjay M R , Siengchin S , Pimenov D Y. . Sustainable milling of Ti-6Al-4V: a trade-off between energy efficiency, carbon emissions and machining characteristics under MQL and cryogenic environment. Journal of Cleaner Production, 2021, 281: 125374

[126] Gao T , Zhang Y B , Li C H , Wang Y Q , An Q L , Liu B , Said Z , Sharma S . Grindability of carbon fiber reinforced polymer using CNT biological lubricant. Scientific Reports, 2021, 11(1): 22535

[127] Khanna N , Agrawal C , Pimenov D Y , Singla A K , Machado A R , da Silva L R R , Gupta M K , Sarikaya M , Krolczyk G M . Review on design and development of cryogenic machining setups for heat resistant alloys and composites. Journal of Manufacturing Processes, 2021, 68: 398–422

[128] Öndin O , Kıvak T , Sarıkaya M , Yıldırım Ç V . Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of pH 13-8 Mo stainless steel. Tribology International, 2020, 148: 106323

[129] Rahim E A , Sasahara H . A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys. Tribology International, 2011, 44(3): 309–317

[130] Khan M M A , Dhar N R . Performance evaluation of minimum quantity lubrication by vegetable oil in terms of cutting force, cutting zone temperature, tool wear, job dimension and surface finish in turning AISI-1060 steel. Journal of Zhejiang University-SCIENCE A, 2006, 7(11): 1790–1799

[131] Li M , Yu T B , Zhang R C , Yang L , Li H Y , Wang W S . MQL milling of TC4 alloy by dispersing graphene into vegetable oil-based cutting fluid. The International Journal of Advanced Manufacturing Technology, 2018, 99(5–8): 1735–1753

[132] Chetan S , Ghosh P V . Application of sustainable techniques in metal cutting for enhanced machinability: a review. Journal of Cleaner Production, 2015, 100: 17–34

[133] Maruda R W , Krolczyk G M , Wojciechowski S , Powalka B , Klos S , Szczotkarz N , Matuszak M , Khanna N . Evaluation of turning with different cooling-lubricating techniques in terms of surface integrity and tribologic properties. Tribology International, 2020, 148: 106334

[134] Jia D Z , Zhang Y B , Li C H , Yang M , Gao T , Said Z , Sharma S . Lubrication-enhanced mechanisms of titanium alloy grinding using lecithin biolubricant. Tribology International, 2022, 169: 107461

[135] Bai X F , Zhou F M , Li C H , Dong L , Lv X J , Yin Q G . Physicochemical properties of degradable vegetable-based oils on minimum quantity lubrication milling. The International Journal of Advanced Manufacturing Technology, 2020, 106(9–10): 4143–4155

[136] Singh G , Gupta M K , Hegab H , Khan A M , Song Q H , Liu Z Q , Mia M , Jamil M , Sharma V S , Sarikaya M , Pruncu C I . Progress for sustainability in the mist assisted cooling techniques: a critical review. The International Journal of Advanced Manufacturing Technology, 2020, 109(1–2): 345–376

[137] Sato B K , Lopes J C , Diniz A E , Rodrigues A R , de Mello H J , Sanchez L E A , Aguiar P R , Bianchi E C . Toward sustainable grinding using minimum quantity lubrication technique with diluted oil and simultaneous wheel cleaning. Tribology International, 2020, 147: 106276

[138] Şirin Ş , Yıldırım Ç V , Kıvak T , Sarıkaya M . Performance of cryogenically treated carbide inserts under sustainable cryo-lubrication assisted milling of Inconel X750 alloy. Sustainable Materials and Technologies, 2021, 29: e00314

[139] Makhesana M A , Patel K M , Khanna N . Analysis of vegetable oil-based nano-lubricant technique for improving machinability of Inconel 690. Journal of Manufacturing Processes, 2022, 77: 708–721

[140] Jamil M , Khan A M , Hegab H , Gupta M K , Mia M , He N , Zhao G L , Song Q H , Liu Z Q . Milling of Ti-6Al-4V under hybrid Al₂O₃-MWCNT nanofluids considering energy consumption, surface quality, and tool wear: a sustainable machining. The International Journal of Advanced Manufacturing Technology, 2020, 107(9–10): 4141–4157

[141] Khanna N , Shah P , Sarikaya M , Pusavec F . Energy consumption and ecological analysis of sustainable and conventional cutting fluid strategies in machining 15–5 PHSS. Sustainable Materials and Technologies, 2022, 32: e00416

[142] Rapeti P , Pasam V K , Gurram K M R , Revuru R S . Performance evaluation of vegetable oil based nano cutting fluids in machining using grey relational analysis-A step towards sustainable manufacturing. Journal of Cleaner Production, 2018, 172: 2862–2875

[143] Hadad M , Beigi M . A novel approach to improve environmentally friendly machining processes using ultrasonic nozzle-minimum quantity lubrication system. The International Journal of Advanced Manufacturing Technology, 2021, 114(3–4): 741–756

[144] Krishnan G P , Raj D S . Machinability and tribological analysis of used cooking oil for MQL applications in drilling AISI 304 using a low-cost pneumatic operated MQL system. Journal of Manufacturing Processes, 2023, 104: 348–371

[145] Kurgin S , Dasch J M , Simon D L , Barber G C , Zou Q . A comparison of two minimum quantity lubrication delivery systems. Industrial Lubrication and Tribology, 2014, 66(1): 151–159

[146] Boubekri N , Shaikh V , Foster P R . A technology enabler for green machining: minimum quantity lubrication (MQL). Journal of Manufacturing Technology Management, 2010, 21(5): 556–566

[147] Hamran N N N , Ghani J A , Ramli R , Haron C H C . A review on recent development of minimum quantity lubrication for sustainable machining. Journal of Cleaner Production, 2020, 268: 122165

[148] Barczak L M , Batako A D . Application of minimum quantity lubrication in grinding. Materials and Manufacturing Processes, 2012, 27(4): 406–411

[149] An Q L , Yang J , Li J L , Liu G , Chen M , Li C H . A state-of-the-art review on the intelligent tool holders in machining. Intelligent and Sustainable Manufacturing, 2024, 1(1): 10002

[150] de Moraes D L , Lopes J C , Andrioli B V , Moretti G B , da Silva A E , da Silva J M M , Ribeiro F S F , de Aguiar P R , Bianchi E C . Advances in precision manufacturing towards eco-friendly grinding process by applying MQL with cold air compared with cooled wheel cleaning jet. The International Journal of Advanced Manufacturing Technology, 2021, 113(11–12): 3329–3342

[151] Murali T , Devendiran S . Design of an internally cooled green tubular channel for turning application. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2024, 46(2): 68

[152] Murali T , Devendiran S . A new internal cooling system for a green tubular channel investigated for tool life in Hastelloy-B3 turning for MQL medium. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2024, 46(4): 255

[153] Obikawa T , Asano Y , Kamata Y . Computer fluid dynamics analysis for efficient spraying of oil mist in finish-turning of Inconel 718. International Journal of Machine Tools and Manufacture, 2009, 49(12–13): 971–978

[154] Shi C F , Li X , Chen Z T . Design and experimental study of a micro-groove grinding wheel with spray cooling effect. Chinese Journal of Aeronautics, 2014, 27(2): 407–412

[155] Mao C , Zhou X , Yin L R , Zhang M J , Tang K , Zhang J . Investigation of the flow field for a double-outlet nozzle during minimum quantity lubrication grinding. The International Journal of Advanced Manufacturing Technology, 2016, 85(1–4): 291–298

[156] Zaman P B , Dhar N R . Design and evaluation of an embedded double jet nozzle for MQL delivery intending machinability improvement in turning operation. Journal of Manufacturing Processes, 2019, 44: 179–196

[157] Ha S J , Lim D W , Kim J H , Park J Y , Song K H . Economic evaluation and machining performance in Ti-6Al-4V titanium alloy milling by integrated CO₂ & MQL injection system. Journal of Mechanical Science and Technology, 2021, 35(9): 4135–4142

[158] Korkmaz M E , Gupta M K , Boy M , Yaşar N , Krolczyk G M , Günay M . Influence of duplex jets MQL and nano-MQL cooling system on machining performance of Nimonic 80A. Journal of Manufacturing Processes, 2021, 69: 112–124

[159] Van A L , Nguyen T T . Investigation and optimization of MQL system parameters in the roller-burnishing process of hardened steel. Journal of Mechanical Engineering, 2022, 68(3): 155–165

[160] Altaf S F , Parray M A , Khan M J , Wani M F , Bhat F A . Machining with minimum quantity lubrication and nano-fluid MQL: a review. Tribology Online, 2024, 19(3): 209–217

[161] Li R Y , Zhao X , Zhou B , Wang L . Experimental research on milling of TC11 by scCO₂-MQL and edge morphology. Ferroelectrics, 2023, 614(1): 282–300

[162] Sahoo A K, Kumar R, Panda A, Chandra Mishra P, Mohanty T. Toward machinability improvement of AISI 4340 using CVD multilayer TiN-coated carbide insert through MQL: a case study. In: Nayak R K, Pradhan M K, Mandal A, Davim J P (eds). Recent Advances in Materials and Manufacturing Technology: Select Proceedings of ICAMMT 2022. Singapore: Springer, 2023, 939939939

[163] Tiwari S , Amarnath M , Gupta M K , Makhesana M A . Performance assessment of nano-Al₂O₃ enriched coconut oil as a cutting fluid in MQL-assisted machining of AISI-1040 steel. The International Journal of Advanced Manufacturing Technology, 2023, 129(3–4): 1689–1702

[164] Hiralal Singh V , Anil Kumar M , Annar S , Upadhye G C , Srinivasa Reddy Y , Pratima Kumari S . Influence of SiO₂, MgO, and Fe₂O₃ metallic nano cutting fluids of AA6061 in MQL environment. Materials Today: Proceedings, 2022, 69: 1103–1109

[165] Kong X Y , Yuan S M , Zhu G Y , Zhang W J. . Influences of MQL system parameters on atomization characteristics. China Mechanical Engineering, 2021, 32(5): 579–586

[166] Lefebure A , Shim D . Ultrasonic atomization of highly viscous biodegradable oils for MQL applications. Journal of Mechanical Science and Technology, 2021, 35(12): 5503–5516

[167] Gu G Q , Wu S J , Wang D Z , Zhou S , Zhu L D , An Q L , Guo H , Li C H . A review of the research on the variation of tool’s motion trajectory and its influence on the formation mechanism of surface quality in ultrasonic vibration machining. Journal of Manufacturing Processes, 2023, 107: 294–319

[168] Zhang C , Wu S J , Wang D Z , Li G H , Chen J P , Lu K , Li C H , Mao C . Wear mechanism in nano polishing of SiCp/Al composite materials using molecular dynamics. The International Journal of Advanced Manufacturing Technology, 2024, 131(5–6): 3057–3069

[169] Metla S B S , Huang C H , Stachiv I , Jeng Y R . Opportunities and challenges of minimum quantity lubrication as pathways to sustainable manufacturing. Results in Engineering, 2025, 28: 108272

[170] Xu W H , Li C H , Zhang Y B , Ali H M , Sharma S , Li R Z , Yang M , Gao T , Liu M Z , Wang X M , Said Z , Liu X , Zhou Z M . Electrostatic atomization minimum quantity lubrication machining: from mechanism to application. International Journal of Extreme Manufacturing, 2022, 4(4): 042003

[171] Jia D Z , Li C H , Liu J H , Zhang Y B , Yang M , Gao T , Said Z , Sharma S . Prediction model of volume average diameter and analysis of atomization characteristics in electrostatic atomization minimum quantity lubrication. Friction, 2023, 11(11): 2107–2131

[172] Gao T , Xu P M , Wang W , Zhang Y B , Xu W H , Wang Y Q , An Q L , Li C H . Force model of ultrasonic empowered minimum quantity lubrication grinding CFRP. International Journal of Mechanical Sciences, 2024, 280: 109522

[173] Yang Y Y , Yang M , Li C H , Li R Z , Said Z , Ali H M , Sharma S . Machinability of ultrasonic vibration-assisted micro-grinding in biological bone using nanolubricant. Frontiers of Mechanical Engineering, 2023, 18(1): 1

[174] Sun L Y , Zhang Y B , Cui X , An Q L , Chen Y , Jia D Z , Gong P , Liu M Z , Dambatta Y S , Li C H . Magnetic lubricants: preparation, physical mechanism, and application. Friction, 2025, 13(7): 9441010

[175] Lv T , Xu X F , Yu A B , Niu C C , Hu X D . Ambient air quantity and cutting performances of water-based Fe₃O₄ nanofluid in magnetic minimum quantity lubrication. The International Journal of Advanced Manufacturing Technology, 2021, 115(5–6): 1711–1722

[176] Rais M R H, Ali M Y, Ramesh S, Ya’akub S R, Ibrahim Z. Performance of graphite based nanofluid in MQL grinding of mild steel. In: Maleque M A, Ahmad Azhar A Z, Sarifuddin N, Syed Shaharuddin S I, Mohd Ali A, Abdul Halim N F H (eds). Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering. Singapore: Springer, 2023, 351–357

[177] Rauf A , Khan M A , Jaffery S H I , Butt S I . Effects of machining parameters, ultrasonic vibrations and cooling conditions on cutting forces and tool wear in meso scale ultrasonic vibrations assisted end-milling (UVAEM) of Ti–6Al–4V under dry, flooded, MQL and cryogenic environments – A statistical analysis. Journal of Materials Research and Technology, 2024, 30: 8287–8303

[178] Sifa A , Endramawan T , Suwandi D , Putra M P , Amat M A . Utilization of minimum quantity lubrication (MQL) chip fan on SS304 during milling process to increase carbide tool life. International Journal of Automotive and Mechanical Engineering, 2022, 19(4): 10073–10083

[179] Song Y X , Xu Z L , Li C H , Zhou Z M , Liu B , Zhang Y B , Dambatta Y S , Wang D Z. . Research progress on the grinding performance of nanobiolubricant minimum quantity lubrication. Surface Technology, 2023, 52(12): 1–19

[180] Cao Y , Zhu Y J , Nan Li H , Wang C X , Su H H , Yin Z , Ding W F . Development and performance of a novel ultrasonic vibration plate sonotrode for grinding. Journal of Manufacturing Processes, 2020, 57: 174–186

[181] Chen T , Xiao H , Feng S D , Zhao B , Ding W F , Qian N , Xu J H , Wang Y M . Heterogeneous components removal mechanism and grinding force model from energy aspect in ultrasonic grinding continuous fiber reinforced metal matrix composites. Journal of Materials Processing Technology, 2024, 332: 118538

[182] Chen T , Wang X W , Zhao B , Ding W F , Xiong M Y , Xu J H , Liu Q , Xu D D , Zhao Y J , Zhu J H . Material removal mechanisms in ultrasonic vibration-assisted high-efficiency deep grinding γ-TiAl alloy. Chinese Journal of Aeronautics, 2024, 37(11): 462–476

[183] Cao Y , Ding W F , Zhao B , Wen X B , Li S P , Wang J Z . Effect of intermittent cutting behavior on the ultrasonic vibration-assisted grinding performance of Inconel718 nickel-based superalloy. Precision Engineering, 2022, 78: 248–260

[184] Zhao B , You H X , Miao Q , Ding W F , Qian N , Xu J H . Surface integrity characterization of third-generation nickel-based single crystal blade tenons after ultrasonic vibration-assisted grinding. Chinese Journal of Aeronautics, 2025, 38(1): 103138

[185] Zhang X P , Li C H , Zhang Y B , Wang Y G , Li B K , Yang M , Guo S M , Liu G T , Zhang N Q . Lubricating property of MQL grinding of Al₂O₃/SiC mixed nanofluid with different particle sizes and microtopography analysis by cross-correlation. Precision Engineering, 2017, 47: 532–545

[186] Das A , Das S R , Patel S K , Biswal B B . Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 2020, 24(2): 291–320

[187] Lee P H , Lee S W , Lim S H , Lee S H , Ko H S , Shin S W . A study on thermal characteristics of micro-scale grinding process using nanofluid minimum quantity lubrication (MQL). International Journal of Precision Engineering and Manufacturing, 2015, 16(9): 1899–1909

[188] Su Y , Gong L , Li B , Liu Z Q , Chen D D . Performance evaluation of nanofluid MQL with vegetable-based oil and ester oil as base fluids in turning. The International Journal of Advanced Manufacturing Technology, 2016, 83(9–12): 2083–2089

[189] Touggui Y , Uysal A , Emiroglu U , Belhadi S , Temmar M . Evaluation of MQL performances using various nanofluids in turning of AISI 304 stainless steel. The International Journal of Advanced Manufacturing Technology, 2021, 115(11–12): 3983–3997

[190] Cui X , Li C H , Ding W F , Chen Y , Mao C , Xu X F , Liu B , Wang D Z , Li H N , Zhang Y B , Said Z , Debnath S , Jamil M , Ali H M , Sharma S . Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: from mechanisms to application. Chinese Journal of Aeronautics, 2022, 35(11): 85–112

[191] Gupta N , Gupta S M , Sharma S K . Synthesis, characterization and dispersion stability of water-based Cu–CNT hybrid nanofluid without surfactant. Microfluidics and Nanofluidics, 2021, 25(2): 14

[192] Song Y X , Li C H , Zhou Z M , Liu B , Sharma S , Dambatta Y S , Zhang Y B , Yang M , Gao T , Liu M Z , Cui X , Wang X M , Xu W H , Li R Z , Wang D Z . Nanobiolubricant grinding: a comprehensive review. Advances in Manufacturing, 2025, 13(1): 1–42

[193] Chakraborty S , Panigrahi P K . Stability of nanofluid: a review. Applied Thermal Engineering, 2020, 174: 115259

[194] Ahn I H , Hwang J H , Choi W C . Error analysis of the cutting coefficients and optimization of calibration procedure for cutting force prediction. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2011, 225(2): 149–162

[195] Bai X F , Jiang J , Li C H , Dong L , Ali H M , Sharma S . Tribological performance of different concentrations of Al₂O₃ nanofluids on minimum quantity lubrication milling. Chinese Journal of Mechanical Engineering, 2023, 36(1): 11

[196] Wang X M , Li C H , Zhang Y B , Ding W F , Yang M , Gao T , Cao H J , Xu X F , Wang D Z , Said Z , Debnath S , Jamil M , Ali H M . Vegetable oil-based nanofluid minimum quantity lubrication turning: academic review and perspectives. Journal of Manufacturing Processes, 2020, 59: 76–97

[197] Zhang Y B , Li H N , Li C H , Huang C Z , Ali H M , Xu X F , Mao C , Ding W F , Cui X , Yang M , Yu T B , Jamil M , Gupta M K , Jia D Z , Said Z . Nano-enhanced biolubricant in sustainable manufacturing: from processability to mechanisms. Friction, 2022, 10(6): 803–841

[198] Jia D Z , Li C H , Zhang Y B , Yang M , Zhang X P , Li R Z , Ji H J . Experimental evaluation of surface topographies of NMQL grinding ZrO₂ ceramics combining multiangle ultrasonic vibration. The International Journal of Advanced Manufacturing Technology, 2019, 100(1–4): 457–473

[199] Saravanan R , Sathish T , Vijayan V , Rajkumar S , Sharma S , Li C H , Zhang Y B , Sharma K , Eldin S M . Eco-friendly MoS₂/waste coconut oil nanofluid for machining of magnesium implants. Reviews on Advanced Materials Science, 2023, 62(1): 20220296

[200] Duc T M , Long T T , Van Thanh D. . Evaluation of minimum quantity lubrication and minimum quantity cooling lubrication performance in hard drilling of Hardox 500 steel using Al₂O₃ nanofluid.. Advances in Mechanical Engineering, 2020, 12(2): 10

[201] Mehta B , Subhedar D , Panchal H , Said Z . Synthesis, stability, thermophysical properties and heat transfer applications of nanofluid – A review. Journal of Molecular Liquids, 2022, 364: 120034

[202] Zhang D K , Li C H , Zhang Y B , Jia D Z , Zhang X W . Experimental research on the energy ratio coefficient and specific grinding energy in nanoparticle jet MQL grinding. The International Journal of Advanced Manufacturing Technology, 2015, 78(5–8): 1275–1288

[203] Gao T , Li C H , Jia D Z , Zhang Y B , Yang M , Wang X M , Cao H J , Li R Z , Ali H M , Xu X F . Surface morphology assessment of CFRP transverse grinding using CNT nanofluid minimum quantity lubrication. Journal of Cleaner Production, 2020, 277: 123328

[204] Sui M H , Li C H , Wu W T , Yang M , Ali H M , Zhang Y B , Jia D Z , Hou Y L , Li R Z , Cao H J . Temperature of grinding carbide with castor oil-based MoS₂ nanofluid minimum quantity lubrication. Journal of Thermal Science and Engineering Applications, 2021, 13(5): 051001

[205] Munyalo J M , Zhang X L . Particle size effect on thermophysical properties of nanofluid and nanofluid based phase change materials: a review. Journal of Molecular Liquids, 2018, 265: 77–87

[206] Wang J , Yang X , Klemeš J J , Tian K , Ma T , Sunden B . A review on nanofluid stability: preparation and application. Renewable and Sustainable Energy Reviews, 2023, 188: 113854

[207] Wang X M , Li C H , Zhang Y B , Said Z , Debnath S , Sharma S , Yang M , Gao T . Influence of texture shape and arrangement on nanofluid minimum quantity lubrication turning. The International Journal of Advanced Manufacturing Technology, 2022, 119(1–2): 631–646

[208] Wang D X , Zhang Y , Zhao Q L , Jiang J L , Liu G L , Li C H . Tribological mechanism of carbon group nanofluids on grinding interface under minimum quantity lubrication based on molecular dynamic simulation. Frontiers of Mechanical Engineering, 2023, 18(1): 17

[209] Wang D X , Zhang Y , Zhao Q L , Jiang J L , Liu G L , Li C H . Tribological mechanism of graphene and ionic liquid mixed fluid on grinding interface under nanofluid minimum quantity lubrication. Chinese Journal of Mechanical Engineering, 2023, 36(1): 78

[210] Sen B , Mia M , Krolczyk G M , Mandal U K , Mondal S P . Eco-friendly cutting fluids in minimum quantity lubrication assisted machining: a review on the perception of sustainable manufacturing. International Journal of Precision Engineering and Manufacturing-Green Technology, 2021, 8(1): 249–280

[211] Wang X M , Li C H , Yang M , Zhang Y B , Liu M Z , Gao T , Cui X , Wang D Z , Cao H J , Chen Y , Liu B. . Research progress on the physical mechanism of minimum quantity lubrication machining with nano-biolubricants. Journal of Mechanical Engineering, 2024, 60(9): 286–322

[212] Tlili I . Impact of thermal conductivity on the thermophysical properties and rheological behavior of nanofluid and hybrid nanofluid. Mathematical Sciences, 2024, 18(4): 493–501

[213] Chu A X , Li C H , Zhou Z M , Liu B , Zhang Y B , Yang M , Gao T , Liu M Z , Zhang N Q , Dambatta Y S , Sharma S . Nanofluids minimal quantity lubrication machining: from mechanisms to application. Lubricants, 2023, 11(10): 422

[214] Duan Z J , Yin Q G , Li C H , Dong L , Bai X F , Zhang Y B , Yang M , Jia D Z , Li R Z , Liu Z Q . Milling force and surface morphology of 45 steel under different Al₂O₃ nanofluid concentrations. The International Journal of Advanced Manufacturing Technology, 2020, 107(3–4): 1277–1296

[215] Zhang Z C , Sui M H , Li C H , Zhou Z M , Liu B , Chen Y , Said Z , Debnath S , Sharma S . Residual stress of grinding cemented carbide using MoS₂ nano-lubricant. The International Journal of Advanced Manufacturing Technology, 2022, 119(9–10): 5671–5685

[216] Gupta M , Singh V , Kumar R , Said Z . A review on thermophysical properties of nanofluids and heat transfer applications. Renewable and Sustainable Energy Reviews, 2017, 74: 638–670

[217] Thakur A , Manna A , Samir S . Experimental investigation of nanofluids in minimum quantity lubrication during turning of EN-24 steel. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2020, 234(5): 712–729

[218] Cui X , Li C H , Zhang Y B , Jia D Z , Zhao Y J , Li R Z , Cao H J . Tribological properties under the grinding wheel and workpiece interface by using graphene nanofluid lubricant. The International Journal of Advanced Manufacturing Technology, 2019, 104(9–12): 3943–3958

[219] Barewar S D , Kotwani A , Chougule S S , Unune D R . Investigating a novel Ag/ZnO based hybrid nanofluid for sustainable machining of Inconel 718 under nanofluid based minimum quantity lubrication. Journal of Manufacturing Processes, 2021, 66: 313–324

[220] Sarkar S , Datta S . Machining performance of Inconel 718 under dry, MQL, and nanofluid MQL conditions: application of coconut oil (base fluid) and multi-walled carbon nanotubes as additives. Arabian Journal for Science and Engineering, 2021, 46(3): 2371–2395

[221] Kumar A , Sharma A K , Katiyar J K . State-of-the-art in sustainable machining of different materials using nano minimum quality lubrication (NMQL). Lubricants, 2023, 11(2): 64

[222] Shah R , Shirvani K A , Przyborowski A , Pai N , Mosleh M . Role of nanofluid minimum quantity lubrication (NMQL) in machining application. Lubricants, 2022, 10(10): 266

[223] Singh T , Dureja J S , Dogra M , Bhatti M S . Environment friendly machining of Inconel 625 under nano-fluid minimum quantity lubrication (NMQL). International Journal of Precision Engineering and Manufacturing, 2018, 19(11): 1689–1697

[224] Duan Z J , Li C H , Ding W F , Zhang Y B , Yang M , Gao T , Cao H J , Xu X F , Wang D Z , Mao C , Li H N , Kumar G M , Said Z , Debnath S , Jamil M , Ali H M . Milling force model for aviation aluminum alloy: academic insight and perspective analysis. Chinese Journal of Mechanical Engineering, 2021, 34(1): 18

[225] Zhang J C , Li C H , Zhang Y B , Yang M , Jia D Z , Hou Y L , Li R Z . Temperature field model and experimental verification on cryogenic air nanofluid minimum quantity lubrication grinding. The International Journal of Advanced Manufacturing Technology, 2018, 97(1–4): 209–228

[226] Zhang X P , Li C H , Jia D Z , Gao T , Zhang Y B , Yang M , Li R Z , Han Z G , Ji H J . Spraying parameter optimization and microtopography evaluation in nanofluid minimum quantity lubrication grinding. The International Journal of Advanced Manufacturing Technology, 2019, 103(5–8): 2523–2539

[227] Wang Y G , Li C H , Zhang Y B , Li B K , Yang M , Zhang X P , Guo S M , Liu G T . Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids. Tribology International, 2016, 99: 198–210

[228] Sahu N K , Andhare A B , Raju R A . Evaluation of performance of nanofluid using multiwalled carbon nanotubes for machining of Ti-6Al-4V. Machining Science and Technology, 2018, 22(3): 476–492

[229] Raju R A , Andhare A , Sahu N K . Performance of multi-walled carbon nanotube-based nanofluid in turning operation. Materials and Manufacturing Processes, 2017, 32(13): 1490–1496

[230] Mahapatra S , Das A , Jena P C , Das S R . Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2023, 237(4): 843–864

[231] Grumezescu A M , Saviuc C , Chifiriuc M C , Hristu R , Mihaiescu D E , Balaure P , Stanciu G , Lazar V . Inhibitory activity of Fe₃O₄/oleic acid/usnic acid-core/shell/extra-shell nanofluid on S. aureus biofilm development. IEEE Transactions on NanoBioscience, 2011, 10(4): 269–274

[232] Yadav N , Jaiswal A K , Dey K K , Yadav V B , Nath G , Srivastava A K , Yadav R R . Trimetallic Au/Pt/Ag based nanofluid for enhanced antibacterial response. Materials Chemistry and Physics, 2018, 218: 10–17

[233] Salehi J M , Heyhat M M , Rajabpour A . Enhancement of thermal conductivity of silver nanofluid synthesized by a one-step method with the effect of polyvinylpyrrolidone on thermal behavior. Applied Physics Letters, 2013, 102(23): 231907

[234] Beyth N , Houri-Haddad Y , Domb A , Khan W , Hazan R . Alternative antimicrobial approach: nano-antimicrobial materials. Evidence-Based Complementary and Alternative Medicine, 2015, 2015: 246012

[235] Tseng K H , Lee H L , Liao C Y , Chen K C , Lin H S . Rapid and efficient synthesis of silver nanofluid using electrical discharge machining. Journal of Nanomaterials, 2013, 2013: 174939

[236] Batako A D L , Tsiakoumis V . An experimental investigation into resonance dry grinding of hardened steel and nickel alloys with element of MQL. The International Journal of Advanced Manufacturing Technology, 2015, 77(1–4): 27–41

[237] Salur E , Kuntoğlu M , Aslan A , Pimenov D Y . The effects of MQL and dry environments on tool wear, cutting temperature, and power consumption during end milling of AISI 1040 steel. Metals, 2021, 11(11): 1674

[238] Singh G , Aggarwal V , Singh S , Singh B , Sharma S , Singh J , Li C H , Królczyk G , Kumar A , Eldin S M . Performance investigations for sustainability assessment of Hastelloy C-276 under different machining environments. Heliyon, 2023, 9(3): e13933

[239] Yang M , Hao J C , Wu W T , Li Z H , Ma Y Q , Zhou Z M , Gao T , Liu M Z , Cui X , Zhang Y B , Li B K , Ma X , Dambatta Y S , Li C H . Critical cutting thickness model considering subsurface damage of zirconia grinding and friction–wear performance evaluation applied in simulated oral environment. Tribology International, 2024, 198: 109881

[240] Yun D K , Gao Q , Jia D Z , Zhao B T , Wang Q Z . Study on the grinding surface quality of CNTs/2009Al composite material based on minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2025, 239(9): 1323–1337

[241] Zhang J C , Wu W T , Li C H , Yang M , Zhang Y B , Jia D Z , Hou Y L , Li R Z , Cao H J , Ali H M . Convective heat transfer coefficient model under nanofluid minimum quantity lubrication coupled with cryogenic air grinding Ti-6Al-4V. International Journal of Precision Engineering and Manufacturing-Green Technology, 2021, 8(4): 1113–1135

[242] Şap S , Usca Ü A , Uzun M , Kuntoğlu M , Salur E , Pimenov D Y . Investigation of the effects of cooling and lubricating strategies on tribological characteristics in machining of hybrid composites. Lubricants, 2022, 10(4): 63

[243] Natarajan S P , Vaudreuil S , Chibane H , Morandeau A , Xavior M A , Cormier J , Leroy R , Duchosal A . Tool life and surface integrity characteristics in milling of SLM and C&W Inconel 718 in dry and MQL condition. The International Journal of Advanced Manufacturing Technology, 2022, 121(1–2): 647–659

[244] Yin Q G , Li C H , Dong L , Bai X F , Zhang Y B , Yang M , Jia D Z , Li R Z , Liu Z Q . Effects of physicochemical properties of different base oils on friction coefficient and surface roughness in MQL milling AISI 1045. International Journal of Precision Engineering and Manufacturing-Green Technology, 2021, 8(6): 1629–1647

[245] Abellán-Nebot J V , Pastor C V , Siller H R . A review of the factors influencing surface roughness in machining and their impact on sustainability. Sustainability, 2024, 16(5): 1917

[246] Jawahir I S , Schoop J , Kaynak Y , Balaji A K , Ghosh R , Lu T . Progress toward modeling and optimization of sustainable machining processes. Journal of Manufacturing Science and Engineering, 2020, 142(11): 110811

[247] Bhirud N L , Gawande R R . Measurement and prediction of cutting temperatures during dry milling: review and discussions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, 39(12): 5135–5158

[248] Pul M . Investigation of the tool wear, surface roughness, and chip formation in the machining of ZrO₂-reinforced aluminum composites. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020, 42(11): 565

[249] Ding T C , Zhang S , Wang Y W , Zhu X L . Empirical models and optimal cutting parameters for cutting forces and surface roughness in hard milling of AISI H13 steel. The International Journal of Advanced Manufacturing Technology, 2010, 51(1–4): 45–55

[250] Li B , Tian X T , Zhang M . Modeling and multi-objective optimization of cutting parameters in the high-speed milling using RSM and improved TLBO algorithm. The International Journal of Advanced Manufacturing Technology, 2020, 111(7–8): 2323–2335

[251] Tian C L , Zhou G H , Lu Q , Zhang J J , Xiao Z D , Wang R . An integrated decision-making approach on cutting tools and cutting parameters for machining features considering carbon emissions. International Journal of Computer Integrated Manufacturing, 2019, 32(7): 629–641

[252] Najiha M S , Rahman M M , Yusoff A R . Environmental impacts and hazards associated with metal working fluids and recent advances in the sustainable systems: a review. Renewable and Sustainable Energy Reviews, 2016, 60: 1008–1031

[253] Wang Y , Liu C F . State-of-the-art on minimum quantity lubrication in green machining. Journal of Cleaner Production, 2023, 429: 139613

[254] Virdi R L , Pal A , Chatha S S , Sidhu H S . A review on minimum quantity lubrication technique application and challenges in grinding process using environment-friendly nanofluids. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023, 45(5): 238

[255] Zhang D K , Li C H , Jia D Z , Zhang Y B , Zhang X W . Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding. Chinese Journal of Aeronautics, 2015, 28(2): 570–581

[256] Guo J , Zhang J G , Pan Y A , Kang R K , Yoshiharu N , Paul S , Yue X B , Wang B R , Guo D M . A critical review on the chemical wear and wear suppression of diamond tools in diamond cutting of ferrous metals. International Journal of Extreme Manufacturing, 2020, 2(1): 012001

[257] Lane B M , Shi M , Dow T A , Scattergood R . Diamond tool wear when machining Al6061 and 1215 steel. Wear, 2010, 268(11–12): 1434–1441

[258] Marousi M , Rimpault X , Turenne S , Balazinski M . Initial tool wear and process monitoring during titanium metal matrix composite machining (TIMMC). Journal of Manufacturing Processes, 2023, 86: 208–220

[259] Chang W L , Sun J N , Luo X C , Ritchie J M , Mack C . Investigation of microstructured milling tool for deferring tool wear. Wear, 2011, 271(9–10): 2433–2437

[260] Elias J V , Asams S , Mathew J . Worn tool geometry-based flank wear prediction in micro turning. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2020, 234(4): 710–719

[261] Tseng H C , Tsai M S , Yeh B C , Li K M . Analysis of tool wear by using a cutting bending moment model for milling processes. International Journal of Precision Engineering and Manufacturing, 2022, 23(8): 943–955

[262] Zhang Z Q , Liu Z Q , Ren X P , Zhao J F . Prediction of tool wear rate and tool wear during dry orthogonal cutting of Inconel 718. Metals, 2023, 13(7): 1225

[263] Fan Y H , Hao Z P , Lin J Q , Yu Z X . Material response at tool-chip interface and its effects on tool wear in turning Inconel718. Materials and Manufacturing Processes, 2014, 29(11–12): 1446–1452

[264] Hoier P , Malakizadi A , Klement U , Krajnik P. . Characterization of abrasion- and dissolution-induced tool wear in machining. Wear, 2019, 426–427: 1548–1562

[265] Lindvall R , Lenrick F , M’Saoubi R , Ståhl J E , Bushlya V . Performance and wear mechanisms of uncoated cemented carbide cutting tools in Ti6Al4V machining. Wear, 2021, 477: 203824

[266] Sorgato M , Bertolini R , Ghiotti A , Bruschi S. . Tool wear assessment when drilling AISI H13 tool steel multilayered claddings.. Wear, 2023, 524–525: 204853

[267] Wang R , Yang D Y , Wang W , Wei F R , Lu Y W , Li Y Q . Tool wear in nickel-based superalloy machining: an overview. Processes, 2022, 10(11): 2380

[268] Tosun N , Huseyinoglu M . Effect of MQL on surface roughness in milling of AA7075-T6. Materials and Manufacturing Processes, 2010, 25(8): 793–798

[269] Kishawy H A , Dumitrescu M , Ng E G , Elbestawi M A . Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloy. International Journal of Machine Tools and Manufacture, 2005, 45(2): 219–227

[270] Dhar N R , Ahmed M T , Islam S . An experimental investigation on effect of minimum quantity lubrication in machining AISI 1040 steel. International Journal of Machine Tools and Manufacture, 2007, 47(5): 748–753

[271] Sohrabpoor H , Khanghah S P , Teimouri R . Investigation of lubricant condition and machining parameters while turning of AISI 4340. The International Journal of Advanced Manufacturing Technology, 2015, 76(9–12): 2099–2116

[272] Arsene B , Gheorghe C , Sarbu F A , Barbu M , Cioca L I , Calefariu G . MQL-assisted hard turning of AISI D2 steel with corn oil: analysis of surface roughness, tool wear, and manufacturing costs. Metals, 2021, 11(12): 2058

[273] Pan W C , Ding S L , Mo J . The prediction of cutting force in end milling titanium alloy (Ti6Al4V) with polycrystalline diamond tools. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2017, 231(1): 3–14

[274] Saidur R , Leong K Y , Mohammed H A . A review on applications and challenges of nanofluids. Renewable and Sustainable Energy Reviews, 2011, 15(3): 1646–1668

[275] Sousa V F C , Silva F J G , Fecheira J S , Lopes H M , Martinho R P , Casais R B , Ferreira L P . Cutting forces assessment in CNC machining processes: a critical review. Sensors, 2020, 20(16): 4536

[276] Xu C W , Dou J M , Chai Y Z , Li H Y , Shi Z C , Xu J. . The relationships between cutting parameters, tool wear, cutting force and vibration. Advances in Mechanical Engineering, 2018, 10(1): 727–740

[277] Huang B W , Cai J Z , Hsiao W L . Cutting force estimation in a micromilling process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2010, 224(10): 1615–1619

[278] Pan Z R , Yao B , Chen B Q , Huang J S , Ma X F , Lan Q X . Cutting force model of milling titanium alloy with C60 nanofluid minimum quantity lubrication. Journal of Manufacturing Processes, 2023, 105: 295–306

[279] Ulutan D , Ozel T . Machining induced surface integrity in titanium and nickel alloys: a review. International Journal of Machine Tools and Manufacture, 2011, 51(3): 250–280

[280] Wan M , Li S E , Yuan H , Zhang W H . Cutting force modelling in machining of fiber-reinforced polymer matrix composites (PMCs): a review. Composites Part A: Applied Science and Manufacturing, 2019, 117: 34–55

[281] Wang S J , Zhang T , Deng W P , Sun Z W , To S . Analytical modeling and prediction of cutting forces in orthogonal turning: a review. The International Journal of Advanced Manufacturing Technology, 2022, 119(3–4): 1407–1434

[282] Felusiak-Czyryca A , Madajewski M , Twardowski P , Wiciak-Pikuła M . Cutting forces during Inconel 718 orthogonal turn-milling. Materials, 2021, 14(20): 6152

[283] Matsumura T , Usui E . Simulation of cutting process in peripheral milling by predictive cutting force model based on minimum cutting energy. International Journal of Machine Tools and Manufacture, 2010, 50(5): 467–473

[284] Onozuka H , Tayama F , Huang Y , Inui M . Cutting force model for power skiving of internal gear. Journal of Manufacturing Processes, 2020, 56: 1277–1285

[285] Allu V P , Raju D L , Ramakrishna S . Performance analysis of cryogenically treated plus tempered carbide inserts in turning of Inconel 718 using cryogenic minimum quantity lubrication cooling technique. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2019, 233(12): 1810–1819

[286] Bedi S S , Behera G C , Datta S . Effects of cutting speed on MQL machining performance of AISI 304 stainless steel using uncoated carbide insert: application potential of coconut oil and rice bran oil as cutting fluids. Arabian Journal for Science and Engineering, 2020, 45(11): 8877–8893

[287] Hoang T D , Ngo Q H , Chu N H , Mai T H , Nguyen T , Ho K T , Nguyen D . Ultrasonic assisted nano-fluid MQL in deep drilling of hard-to-cut materials. Materials and Manufacturing Processes, 2022, 37(6): 712–721

[288] Cui X , Li C H , Zhang Y B , Said Z , Debnath S , Sharma S , Ali H M , Yang M , Gao T , Li R Z . Grindability of titanium alloy using cryogenic nanolubricant minimum quantity lubrication. Journal of Manufacturing Processes, 2022, 80: 273–286

[289] Gao T , Li C H , Yang M , Zhang Y B , Jia D Z , Ding W F , Debnath S , Yu T B , Said Z , Wang J . Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant. Journal of Materials Processing Technology, 2021, 290: 116976

[290] Gao T , Zhang Y B , Li C H , Wang Y Q , Chen Y , An Q L , Zhang S , Li H N , Cao H J , Ali H M , Zhou Z M , Sharma S . Fiber-reinforced composites in milling and grinding: machining bottlenecks and advanced strategies. Frontiers of Mechanical Engineering, 2022, 17(2): 24

[291] Leksycki K , Feldshtein E , Lisowicz J , Chudy R , Mrugalski R . Cutting forces and chip shaping when finish turning of 17-4 pH stainless steel under dry, wet, and MQL machining conditions. Metals, 2020, 10(9): 1187

[292] Ngoc T B , Duc T M , Tuan N M , Hoang V L , Long T T . Machinability assessment of hybrid nano cutting oil for minimum quantity lubrication (MQL) in hard turning of 90CrSi steel. Lubricants, 2023, 11(2): 54

[293] Qiao G C , Yang J , Zhen D , Zhang F J . Mechanism, cutting performance, and tool wear of MQL milling aluminum alloys with dual-nozzle. The International Journal of Advanced Manufacturing Technology, 2024, 131(12): 5845–5866

[294] Song K H , Lim D W , Park J Y , Ha S J , Yoon G S . Investigation on influence of hybrid nozzle of CryoMQL on tool wear, cutting force, and cutting temperature in milling of titanium alloys. The International Journal of Advanced Manufacturing Technology, 2020, 110(7–8): 2093–2103

[295] Yağmur S . Investigation of the effect of minimum quantity lubrication and Ranque–Hilsch vortex tube cooling on cutting forces, surface roughness and cutting zone temperature in turning Al 6082 T4 alloy. Proceedings of the Institution of Mechanical Engineers Part E: Journal of Process Mechanical Engineering, 2025, 239(4): 1975–1986

[296] Zan Z L , Guo K , Sun J , Wei X , Tan Y C , Yang B . Investigation of MQL parameters in milling of titanium alloy. The International Journal of Advanced Manufacturing Technology, 2021, 116(1–2): 375–388

[297] Zhang M X , Wu B F , Zhao B , Ding W F , Cui H L . A novel cooling and lubrication approach: device development and machining performance evaluation of ultrasonic vibration-assisted MQL. The International Journal of Advanced Manufacturing Technology, 2024, 133(3–4): 1667–1684

[298] Wang X M , Li C H , Zhang Y B , Ali H M , Sharma S , Li R Z , Yang M , Said Z , Liu X . Tribology of enhanced turning using biolubricants: a comparative assessment. Tribology International, 2022, 174: 107766

[299] Kaynak Y . Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining. The International Journal of Advanced Manufacturing Technology, 2014, 72(5–8): 919–933

[300] Rabiei F , Rahimi A R , Hadad M J , Ashrafijou M . Performance improvement of minimum quantity lubrication (MQL) technique in surface grinding by modeling and optimization. Journal of Cleaner Production, 2015, 86: 447–460

[301] Ji X , Li B Z , Zhang X P , Liang S Y . The effects of minimum quantity lubrication (MQL) on machining force, temperature, and residual stress. International Journal of Precision Engineering and Manufacturing, 2014, 15(11): 2443–2451

[302] Chen T C , Chen Y J , Hung M H , Hung J P. . Design analysis of machine tool structure with artificial granite material. Advances in Mechanical Engineering, 2016, 8(7): 1–14

[303] Möhring H C , Brecher C , Abele E , Fleischer J , Bleicher F . Materials in machine tool structures. CIRP Annals, 2015, 64(2): 725–748

[304] Yıldırım Ç V , Sarıkaya M , Kivak T , Şirin Ş . The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625. Tribology International, 2019, 134: 443–456

[305] Gong P , Zhang Y B , Cui X , Xu S Q , Yang M , Jia D Z , Li C H . Lubricant transportation mechanism and wear resistance of different arrangement textured turning tools. Tribology International, 2024, 196: 109704

[306] Babu M N , Anandan V , Parthasarathi N L , Yildirim C V , Babu M D , Das S R . Performance analysis in turning of d3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022, 44(12): 591

[307] Laakso S V A , Mallipeddi D , Krajnik P . Evaluation of subcooled MQL in cBN hard turning of powder-based Cr-Mo-V tool steel using simulations and experiments. The International Journal of Advanced Manufacturing Technology, 2022, 118(1–2): 511–531

[308] Li Y F , Chen H , Zhang J J , Xiao G C , Yi M D , Chen Z Q , Xu C H . Synergetic lubrication between self-lubricating ceramic tools and nanofluids: advancing the application of self-lubricating ceramic cutting tools. International Journal of Refractory Metals and Hard Materials, 2024, 120: 106622

[309] Sun H W , Zou B , Chen P , Huang C Z , Guo G Q , Liu J K , Li L , Shi Z Y . Effect of MQL condition on cutting performance of high-speed machining of GH4099 with ceramic end mills. Tribology International, 2022, 167: 107401

[310] Das S , Pandivelan C . Grinding characteristics during ultrasonic vibration assisted grinding of alumina ceramic in selected dry and MQL conditions. Materials Research Express, 2020, 7(8): 085404

[311] Xu W H , Gao T , Liu D W , Xu P M , An Q L , Wang Y Q , Ding W F , Li C H. . Progress in grinding mechanical modeling of fiber reinforced SiC ceramic matrix composites. Acta Materiae Compositae Sinica, 2024, 41(9): 4628–4653

[312] Shi Y X , Zhao B , Ding W F . Solid additives to increase the service life of ceramic cutting tool: methodology and mechanism. Intelligent and Sustainable Manufacturing, 2024, 1(2): 10009

[313] Bhadoria N S , Bartarya G . On the improvement in process performance of ceramic inserts during hard turning in MQL environment. Materials and Manufacturing Processes, 2022, 37(3): 283–293

[314] Marques A , Suarez M P , Sales W F , Machado Á R . Turning of Inconel 718 with whisker-reinforced ceramic tools applying vegetable-based cutting fluid mixed with solid lubricants by MQL. Journal of Materials Processing Technology, 2019, 266: 530–543

[315] Padhan S , Das S R , Das A , Alsoufi M S , Ibrahim A M M , Elsheikh A . Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 2022, 15(7): 2368

[316] Delaunois F , Stanciu V I , Megret A , Sinnaeve M . Oxidation and wear behavior of high-speed steel and semi-high-speed steel used in hot strip mill. The International Journal of Advanced Manufacturing Technology, 2022, 119(1–2): 677–689

[317] Jeong H T , Lee S Y , Ha T K , Jung J Y. . Temperature distribution of high speed tool steel rod during high speed hot rolling procedure. Journal of the Korean Institute of Metals and Materials, 2008, 46(3): 150–158

[318] Shah M F , Kausar Z , Farooq M U , Khan L A , Farooq S S . Accuracy analysis of machining trajectory contemplating workpiece dislocation on a six degree of freedom machining bed. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2021, 235(19): 4037–4048

[319] Sun S , Brandt M , Dargusch M S . Thermally enhanced machining of hard-to-machine materials-A review. International Journal of Machine Tools and Manufacture, 2010, 50(8): 663–680

[320] Dehghan S , Ismail M I S B , Ariffin M K A B M , Baharudin B T H T B . Friction drilling of difficult-to-machine materials: workpiece microstructural alterations and tool wear. Metals, 2019, 9(9): 945

[321] Luo M , Zhang D H , Wu B H , Zhou X . Material removal process optimization for milling of flexible workpiece considering machining stability. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2011, 225(8): 1263–1272

[322] Pervaiz S , Kannan S , Deiab I , Kishawy H . Role of energy consumption, cutting tool and workpiece materials towards environmentally conscious machining: a comprehensive review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2020, 234(3): 335–354

[323] Iturbe A , Giraud E , Hormaetxe E , Garay A , Germain G , Ostolaza K , Arrazola P J . Mechanical characterization and modelling of Inconel 718 material behavior for machining process assessment. Materials Science and Engineering: A, 2017, 682: 441–453

[324] Ahmed Y S , Ryon A . Tribological performance of a hybrid CryoMQL system on Ti6Al4V milling. The International Journal of Advanced Manufacturing Technology, 2022, 120(11–12): 8185–8199

[325] Liao Y S , Liao C H , Lin H M . Study of oil-water ratio and flow rate of MQL fluid in high speed milling of Inconel 718. International Journal of Precision Engineering and Manufacturing, 2017, 18(2): 257–262

[326] Singh G , Gupta M K , Mia M , Sharma V S . Modeling and optimization of tool wear in MQL-assisted milling of Inconel 718 superalloy using evolutionary techniques. The International Journal of Advanced Manufacturing Technology, 2018, 97(1–4): 481–494

[327] Sahoo S P , Pandey K , Datta S . Performance of uncoated/coated carbide inserts during MQL (sunflower oil) assisted machining of Inconel 718 superalloy. Sādhanā, 2022, 47(4): 193

[328] Zhang J , Huang X F , Kang X Z , Yi H , Wang Q Y , Cao H J . Energy field-assisted high-speed dry milling green machining technology for difficult-to-machine metal materials. Frontiers of Mechanical Engineering, 2023, 18(2): 28

[329] Zhao G L , Zhao B , Ding W F , Xin L J , Nian Z W , Peng J H , He N , Xu J H . Nontraditional energy-assisted mechanical machining of difficult-to-cut materials and components in aerospace community: a comparative analysis. International Journal of Extreme Manufacturing, 2024, 6(2): 022007

[330] Mughal K , Mughal M P , Farooq M U , Anwar S , Ammarullah M I . Using nano-fluids minimum quantity lubrication (NF-MQL) to improve tool wear characteristics for efficient machining of CFRP/Ti6Al4V aeronautical structural composite. Processes, 2023, 11(5): 1540

[331] Zhang M H , Zhang B C , Wen Y J , Qu X H . Research progress on selective laser melting processing for nickel-based superalloy. International Journal of Minerals, Metallurgy and Materials, 2022, 29(3): 369–388

[332] Chetan S , Ghosh P V . Comparison between sustainable cryogenic techniques and nano-MQL cooling mode in turning of nickel-based alloy. Journal of Cleaner Production, 2019, 231: 1036–1049

[333] Khan M A , Wang B , Khan A M , Liu Z Q , Cai Y K , Song Q H . Integrating textured tools and diverse lubricooling approaches in machining performance of Ti and Ni-base alloys – a comprehensive review. Machining Science and Technology, 2024, 28(3): 323–391

[334] Pant P , Bharti P S . Experimental investigation on micro-electrical discharge machining process for heat treated nickel-based Nimonic 80A. Materials and Manufacturing Processes, 2023, 38(1): 1–12

[335] Revuru R S, Posinasetti N R, Vsn V R, Amrita M. Application of cutting fluids in machining of titanium alloys––a review. The International Journal of Advanced Manufacturing Technology, 2017, 91(555): 247724772477

[336] Pimenov D Y , Kiran M , Khanna N , Pintaude G , Vasco M C , da Silva L R R , Giasin K . Review of improvement of machinability and surface integrity in machining on aluminum alloys. The International Journal of Advanced Manufacturing Technology, 2023, 129(11–12): 4743–4779

[337] Yücel A , Yıldırım C V , Sarıkaya M , Şirin Ş , Kıvak T , Gupta M K , Tomaz Í V . Influence of MoS₂ based nanofluid-MQL on tribological and machining characteristics in turning of AA 2024 T3 aluminum alloy. Journal of Materials Research and Technology, 2021, 15: 1688–1704

[338] Pervaiz S , Kannan S , Kishawy H A . An extensive review of the water consumption and cutting fluid based sustainability concerns in the metal cutting sector. Journal of Cleaner Production, 2018, 197: 134–153

[339] Sreejith P S . Machining of 6061 aluminium alloy with MQL, dry and flooded lubricant conditions. Materials Letters, 2008, 62(2): 276–278

[340] García-Martínez E , Miguel V , Martínez-Martínez A , Manjabacas M C , Coello J . Sustainable lubrication methods for the machining of titanium alloys: an overview. Materials, 2019, 12(23): 3852

[341] Tosun N , Rasul S Y , Mahmat A , Tosun G . Enhancing milling performance of 6061 aluminum alloy with nanocutting fluid and MQL. Surface Review and Letters, 2024, 31(7): 2450058

[342] Sharma V S , Dogra M , Suri N M . Cooling techniques for improved productivity in turning. International Journal of Machine Tools and Manufacture, 2009, 49(6): 435–453

RIGHTS & PERMISSIONS

Higher Education Press