Design considerations and experimental studies on semi-active smart pin joint

Abstract

Hostile dynamic loadings such as severe wind storms, earthquakes, and sudden impacts can cause severe damage to many civil engineering structures. An intelligent structural system equipped with smart structural members that are controllable in real-time is an effective solution to structural damage and failure during such situations. Civil intelligent structures with controllable properties to adapt to any changes due to dynamic loadings can lead to effective protection of structures and their occupants. In this paper, design and testing of a semi-active magnetorheological (MR) pin joint, in which the moment resistance can be controlled in real-time by altering the magnetic field, is reported with the view of using it as a potential candidate for smart members in the development of intelligent structures. Design of prototype smart pin joints includes theoretical analysis related to the radius of the rotary plate, the property of MR fluids and the gap between the rotary plate and the casing based on the requirements of the dynamics of MR pin joints. FEM analysis was deployed to study the distribution of the magnetic field along the gap. It is found, from the theoretical analysis and experimental verification, that the MR pin joint with a diameter of 180 mm can produce a torque of up to 30 Nm, which meets requirements for semi-active members in a multi-storey prototype building model in the next stage of research and development.

Keywords

magnetorheological (MR) fluids / smart pin joint / design consideration