Development of meso-scale milling machine tool and its performance analysis

Abstract

To overcome the shortcomings of current technologies for meso-scale manufacturing such as MEMS and ultra precision machining, this paper focuses on the investigations on the meso milling process with a miniaturized machine tool. First, the related technologies for the process mechanism studies are investigated based on the analysis of the characteristics of the meso milling process. An overview of the key issues is presented and research approaches are also proposed. Then, a meso-scale milling machine tool system is developed. The subsystems and their specifications are described in detail. Finally, some tests are conducted to evaluate the performance of the system. These tests consist of precision measurement of the positioning subsystem, the test for machining precision evaluation, and the experiments for machining mechanical parts with complex features. Through test analysis, the meso milling process with a miniaturized machine tool is proved to be feasible and applicable for meso manufacturing.

References

1. Lu Z N Takeshi Y Micro cutting in the microlathe turning systemInternational Journalof Machine Tools & Manufacture 1999 3911711183
2. Liu X Vogler M P Kapoor S G et al.Micro- endmilling with meso-machine-tool systemNSF Design, Service and Manufacturing Grantees andResearch Conference ProcDallas,TX 2004 19 (in Chinese)
3. Sun Y Z Liang Y C Cheng K Micro scale and meso scale mechanical manufacturingChinese Journal of Mechanical Engineering 2004 40(5)16(in Chinese)
4. ZhaoW S LIiW Z Wang Z L Research on a high precision micro EDM systemElectromachining & Mould 2004 169
5. Kurita T Hattori M Development of new conceptdesk top size machine toolInternationalJournal of Machine Tool and manufacture 2005 45959965
6. Lucca D A Rhorer R L Komanduri R Energy dissipation in the ultraprecision machining of copperCIRP Ann 1991 406972
7. Vogler M P Devor R E Kapoor S G et al.Microstructure-Level force prediction model formicro-milling of multi- phase materialsASME Journal of Manufacturing Science and Engineering 2003 125202209
8. Kim C J Mayor J R Ni J A static model of chip formation in microscale millingASME Journal of Manufacturing Science and Engineering 2004 126710718
9. Ikawa N Shimsfs S Tanaka H Minimum thickness of cut in micromachiningNanotechnology 1992 369
10. Milton C S MetalCutting PrinciplesLondonClarendon Press 1984
11. Zhao H Y Jiang Z D Tian S J Analysis on some factors influencing surface quality innanoscale ultra-precision cuttingChineseJournal of Mechanical Engineering 2004 40(4)190194 (in Chinese)
12. Rahman M Kumar A S Prakash J R S Micro milling of pure copperJournal of Materials Processing Technology 2001 1163943 (in Chinese)
13. Tian Y L Liang Y C Cheng K et al.Effect mechanism of tool cutting edge in ultraprecisioncutting processChina Mechanical Engineering 2004 1513201322 (in Chinese)