Study on forced air convection cooling for electronic assemblies

Expand
  • School of Energy & Power Engineering, Xi'an Jiaotong University

Published date: 05 Jun 2008

Abstract

The slotted fin concept was employed to improve the air cooling performance of plate-fin in heat sinks. Numerical simulations of laminar heat transfer and flow pressure drop were conducted for the integral plate fin, discrete plate fin and discrete slotted fin heat sinks. It is found that the performance of the discrete plate fin is better than that of the integral continuum plate fin and the performance of slotted fin is better than that of the discrete plate fin at the same pumping power of the fan. A new type of heat sink characterized by discrete and slotted fin surfaces with thinner fins and smaller spaces between fins is then proposed. Preliminary computation shows that this type of heat sink may be useful for the next generation of higher thermal load CPUs. The limit of cooling capacity for air-cooling techniques was also addressed.

Cite this article

LI Bin, TAO Wenquan, HE Yaling . Study on forced air convection cooling for electronic assemblies[J]. Frontiers in Energy, 2008 , 2(2) : 158 -163 . DOI: 10.1007/s11708-008-0009-2

References

1. Octavio L Gilbert D M Erik D Study of the optimal layout of cooling fins in forced convectioncoolingMicroelectronics Reliability 2002 42(7)11011111. doi:10.1016/S0026‐2714(02)00078‐1
2. Ortega A Theevolution of air cooling in electronic systems and observations aboutits limitsIn: Mishra S CPrasad B V S S SGarimellaS VProceedings of the 18th National &7th ISHMT-ASME Heat and Mass Transfer ConferenceNew DelhiTata McGraw-Hill PublishingCompany Limited 2006 119133
3. Cheng Y P Qu Z G Tao W Q et al.Numerical design of efficient slotted fin surfacebased on the field synergy principleNumericalHeat Transfer: Part A, Applications 2004 45(6)517538. doi:10.1080/10407780490277644
4. Tao W Q NumericalHeat TransferXi'anXi'an Jiaotong University Press 2001 (in Chinese)
Outlines

/