Frontiers in Energy >

2012 , Vol. 6 >Issue 3: 207 - 209

DOI: https://doi.org/10.1007/s11708-012-0204-z

SHORT COMMUNICATION

Phase change effect of low melting point metal for an automatic cooling of USB flash memory

  • Haoshan GE 1 ,
  • Jing LIU , 2
Expand
  • 1. Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China
  • 2. Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Bejing 100190, China; Department of Biomedical Engineering, School of Medicine, Tsinghua University, Beijing 100084, China

Received date: 19 Jul 2012

Accepted date: 25 Jul 2012

Published date: 05 Sep 2012

Copyright

2014 Higher Education Press and Springer-Verlag Berlin Heidelberg
Fold

Cite this article

Haoshan GE , Jing LIU . Phase change effect of low melting point metal for an automatic cooling of USB flash memory[J]. Frontiers in Energy, 2012 , 6(3) : 207 -209 . DOI: 10.1007/s11708-012-0204-z

References

Publishing order | Descend order by publishing year | Descend order by cited within
1
Chowdhury I, Prasher R, Lofgreen K, Chrysler G, Narasimhan S, Mahajan R, Koester D, Alley R, Venkatasubramanian R. On-chip cooling by superlattice-based thin-film thermoelectrics. Nature Nanotechnology, 2009, 4(4): 235–238

DOI PMID

2
Prada L, Garcia J D, Carretero J. Garcia F. Saving power in flash and disk hybrid storage system. In: 2009 IEEE International Symposium on Modeling, Analysis & Simulation of Computer and Telecommunication Systems, Arlington, Virginia, USA, 2009, 632–634

3
Leo H L, Sinclair G B. Flash temperature distributions at the head-disk interface in hard disk drives. ASME Journal of Tribology, 1998, 120(3): 536–541

DOI

4
Liu J, Zhou Y. Chip cooling device using low melting point metals or their alloys as the flow of refrigerant. China Patent, CN02131419.5. 2004

5
Ma K, Liu J. Liquid metal cooling in thermal management of computer chips. Frontiers of Energy and Power Engineering, 2007, 1(4): 384–402

DOI

6
Li P, Liu J. Harvesting low grade heat to generate electricity with thermosyphon effect of room temperature liquid metal. Applied Physics Letters, 2011, 99(9): 094106

DOI

7
Dai D, Zhou Y, Liu J. Liquid metal based thermoelectric generation system for waste heat recovery. Renewable Energy, 2011, 36(12): 3530–3536

DOI

8
Deng Y, Liu J. A liquid metal cooling system for the thermal management of high power LEDs. International Communications in Heat and Mass Transfer, 2010, 37(7): 788–791

DOI

9
Li H, Liu J. Revolutionizing heat transport enhancement with liquid metals: Proposal of a new industry of water-free heat exchangers. Frontiers in Energy, 2011, 5(1): 20–42

DOI

10
Lv Y, Liu J. Interpretation on thermal comfort mechanisms of human bodies by combining Hodgkin-Huxley neuron model and Pennes bioheat equation. Forschung im Ingenieurwesen, 2005, 69(2): 101–114

DOI

11
Kandasamy R, Wang X Q, Mujumdar A S. Application of phase change materials in thermal management of electronics. Applied Thermal Engineering, 2007, 27(17,18): 2822–2832

12
Shen W J, Tan F L. Thermal management of mobile devices. Thermal Science, 2010, 14(1): 115–124

DOI

Options
Outlines

/

〈 〉