High-efficiency and uniformity continuous-flow microwave heating system based on impedance gradient structure

Abstract

Continuous-flow microwave-assisted heating has been extensively applied in chemical engineering. A common method used for heating fluids is by using a tube in a cavity. However, it is challenging to maintain high heating efficiency owing to the temperature-dependent dielectric properties of different fluids, and the temperature of fluids is usually uneven. In this study, a multilayer ring structure is proposed based on an impedance gradient that covers a tube with a porous material inside it to achieve high heating efficiency and uniformity. A multiphysics model, including electromagnetic fields, fluid heat transfer, and free and porous media flow, was established to simulate the continuous-flow microwave heating process. The dimensions of the multilayer ring structure were optimized and manufactured. Energy utilization efficiency experiments and continuous heating experiments were conducted, which demonstrated that the proposed model achieved an efficiency > 90% with different aqueous ethanol solutions, while maintaining high heating uniformity compared with other heating models. Furthermore, the effects of the tube permittivity and porosity of the porous material on the heating efficiency were investigated to demonstrate the robustness of the proposed model.

Graphical abstract

Keywords

heating uniformity / energy efficiency / continuous-flow heating / multiphysics calculation

References

[1] Chu D , Su W , Liang S , Hu S , Chen X . Investigation on the influencing factors of synergistic microwave pyrolysis of oil sludge by metal oxide clay minerals. Matéria (Rio de Janeiro), 2024, 29(4): e20240461

[2] Singh T , Sehgal S . Computational modeling and simulation of the microwave hybrid heating process: a state of the art review. Archives of Computational Methods in Engineering, 2024, 31(2): 1153–1200

[3] Thakur A , Bedi R . Microwave joining of copper pipes using selective microwave hybrid heating process: simulation and experimental study. Materials Today Communications, 2024, 38: 108154

[4] Fan X , Li B , Zi W , Kang M , Wu H , Bian J , Sun M Y . Microwave dielectric characterization and loss mechanism of biowaste during pyrolysis. Energy Conversion and Management, 2024, 301: 118075

[5] Falciglia P P , Roccaro P , Bonanno L , Bonanno L , Guidi G D , Vagliasindi F G A , Romano S . A review on the microwave heating as a sustainable technique for environmental remediation/detoxification applications. Renewable & Sustainable Energy Reviews, 2018, 95: 147–170

[6] Huang F , Liu C , Cheng S , Li T . Microwave thermal regeneration characteristics of spent activated carbon based on a coupled electromagnetic, heat and mass transfer multiphase porous media model. Energy, 2024, 292: 130437

[7] Sweeney C B , Lackey B A , Pospisil M J , Achee T C , Hicks V K , Moran A G , Teipel B R , Saed M A , Green M J . Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating. Science Advances, 2017, 3(6): e1700262

[8] Kostas E T , Beneroso D , Robinson J P . The application of microwave heating in bioenergy: a review on the microwave pre-treatment and upgrading technologies for biomass. Renewable & Sustainable Energy Reviews, 2017, 77: 12–27

[9] Bagade S B , Patil M . Recent advances in microwave assisted extraction of bioactive compounds from complex herbal samples: a review. Critical Reviews in Analytical Chemistry, 2021, 51(2): 138–149

[10] Guo Q , Sun D W , Cheng J H , Han Z . Microwave processing techniques and their recent applications in the food industry. Trends in Food Science & Technology, 2017, 67: 236–247

[11] SaitoKItoKOgasawaraN. Application of microwave energy to therapeutic devices. In: 2017 International Workshop on Antenna Technology: Small Antennas, Innovative Structures, and Applications (iWAT). New York: IEEE, 2017, 243–244

[12] Hassani F , Nekoovaght P M , Gharib N . The influence of microwave irradiation on rocks for microwave-assisted underground excavation. Journal of Rock Mechanics and Geotechnical Engineering, 2016, 8(1): 1–15

[13] WangJLiLYaoBZhengQQiJXiangT. Effect of photonic crystal structure on heating efficiency and uniformity of rectangular microwave reaction cavity. In: 2022 International Conference on Microwave and Millimeter Wave Technology (ICMMT). New York: IEEE, 2022, 01–03

[14] Bhattacharya M , Punathil L , Basak T . A theoretical analysis on the effect of containers on the microwave heating of materials. International Communications in Heat and Mass Transfer, 2017, 82: 145–153

[15] Zhang Z , Su T , Zhang S . Shape effect on the temperature field during microwave heating process. Journal of Food Quality, 2018, 2018(1): 1–24

[16] Meda V , Orsat V , Raghavan V . Microwave heating and the dielectric properties of foods. The Microwave Processing of Foods, 2017, 23–43

[17] Vadivambal R , Jayas D S . Non-uniform temperature distribution during microwave heating of food materials—a review. Food and Bioprocess Technology, 2010, 3(2): 161–171

[18] Zaini M A A , Kamaruddin M J . Critical issues in microwave-assisted activated carbon preparation. Journal of Analytical and Applied Pyrolysis, 2013, 101: 238–241

[19] Hu X L , Yang X Q , Jia G Z . Effective optimization of temperature uniformity and power efficiency in two-ports microwave ovens. Journal of Microwave Power and Electromagnetic Energy, 2014, 48(4): 261–268

[20] PuangsuwanKRuangkoolPSomwongS. Temperature uniformity of germinated brown rice by a rotating tray for microwave heating. In: 2019 7th International Electrical Engineering Congress (iEECON). New York: IEEE, 2019, 1–4

[21] Ehlers R A , Metaxas R A C . An investigation on the effect of varying the load, mesh and simulation parameters in microwave heating applications. Journal of Microwave Power and Electromagnetic Energy, 2007, 40(4): 251–259

[22] Pitchai K , Chen J , Birla S , Gonzalez R , Jones D , Subbiah J . A microwave heat transfer model for a rotating multi-component meal in a domestic oven: development and validation. Journal of Food Engineering, 2014, 128: 60–71

[23] Zhu H , He J , Hong T , Yang Q , Wu Y , Yang Y , Huang K . A notary radiation structure for microwave heating uniformity improvement. Applied Thermal Engineering, 2018, 141: 648–658

[24] Geedipalili S S R , Rakesh V , Datta A K . Modeling the heating uniformity contributed by a rotating turntable in microwave ovens. Journal of Food Engineering, 2007, 82(3): 359–368

[25] Plaza-Gonzalez P , Monzo-Cabrera J , Catal-Civera J M , Sánchez-Hernández D . Effect of mode-stirrer configurations on dielectric heating performance in multimode microwave applicators. IEEE Transactions on Microwave Theory and Techniques, 2005, 53(5): 1699–1706

[26] Wang J , Yao B , Zheng Q , Liu Y , Xiang T , Zhong R . Improvement of microwave heating efficiency and uniformity by controllable rotary columns array. IEEE Transactions on Microwave Theory and Techniques, 2023, 71(8): 3517–3529

[27] Bae S H , Jeong M G , Kim J H , Lee W S . A continuous power-controlled microwave belt drier improving heating uniformity. IEEE Microwave and Wireless Components Letters, 2017, 27(5): 527–529

[28] Lai S , Qiao J , Rasool N , Li K , Zhu H , Yang Y . A dynamic impedance matching algorithm of three-stub tuners based on equivalent circuit analysis. Journal of Microwave Power and Electromagnetic Energy, 2020, 54(4): 330–347

[29] Ali I A . Effect of load on the heating efficiency and temperature uniformity in multi-mode cavity applicators. Journal of Microwave Power and Electromagnetic Energy, 2016, 50(2): 123–137

[30] Pedreo-Molina J L , Monzo-Cabrera J , Pinzolas M . A new procedure for power efficiency optimization in microwave ovens based on thermographic measurements and load location search. International Communications in Heat and Mass Transfer, 2007, 34(5): 564–569

[31] Li Z Y , Wang R F , Kudra T . Uniformity issue in microwave drying. Drying Technology, 2011, 29(6): 652–660

[32] Yang F , Yan X , Zhu H , Yang Y , Huang K . Mitigating thermal focusing in microwave heating of cylindrical loads by resonant rings. International Journal of RF and Microwave Computer-Aided Engineering, 2023, 2023(1): 1668006

[33] Liu M , Zhou D , Peng Y , Tang Z , Huang K , Hong T . High-efficiency continuous-flow microwave heating system based on metal-ring resonant structure. Innovative Food Science & Emerging Technologies, 2023, 85: 103330

[34] Zhu H , Shu W , Xu C , Yang Y , Huang K , Ye J . Novel electromagnetic-black-hole-based high-efficiency single-mode microwave liquid-phase food heating system. Innovative Food Science & Emerging Technologies, 2022, 78: 103012

[35] Chen Q , Chen X , Chen Z Z , Zhang B , Zheng Y Q . High-efficiency microwave heating method based on impedance matching technology. AIP Advances, 2019, 9(1): 015113

[36] Tang Z , Hong T , Liao Y , Chen F , Ye J , Zhu H , Huang K . Frequency-selected method to improve microwave heating performance. Applied Thermal Engineering, 2018, 131: 642–648

[37] Camparione L A , Bava J A , Mascheroni R H . Modeling and process simulation of controlled microwave heating of foods by using of the resonance phenomenon. Applied Thermal Engineering, 2014, 73(1): 914–923

[38] Bows J R . Variable frequency microwave heating of food. Journal of Microwave Power and Electromagnetic Energy, 1999, 34(4): 227–238

[39] Ji B , Fan S , Kou S , Xia X , Deng J , Cheng L , Zhang L . Microwave absorption properties of multilayer impedance gradient absorber consisting of Ti₃C₂T_x MXene/polymer films. Carbon, 2021, 181: 130–140

[40] Pu L , Li S , Zhang Y , Zhu H , Fan W , Ma P , Dong W , Wang Z , Liu T . Polyimide-based graphene composite foams with hierarchical impedance gradient for efficient electromagnetic absorption. Journal of Materials Chemistry C: Materials for Optical and Electronic Devices, 2021, 9(6): 2086–2094

[41] Zhang H , Chen J , Xiao H , Wang N . MXene nanosheet/polypyrrole composite felt with a continuous impedance-gradient structure for electromagnetic wave absorption. ACS Applied Nano Materials, 2023, 7(1): 1289–1299

[42] Ma W , Hong T , Xie T , Wang F , Luo B , Zhou J , Yang Y , Zhu H , Huang K . Simulation and analysis of oleic acid pretreatment for microwave-assisted biodiesel production. Processes, 2018, 6(9): 142

[43] Peng Y , Zhou D , Chen H , Chen H , Liu M , Tang Z , Hong T . Resonance-driven microwave heating of low-loss cylindrical substances in waveguide systems. IEEE Transactions on Microwave Theory and Techniques, 2024, 72(6): 3722–3733

[44] KalganovaS GTrigorlyS VZakharovV V. Computer simulation of microwave heat treatment of dielectrics. In: 2018 IV International Conference on Information Technologies in Engineering Education (Inforino). New York: IEEE, 2018, 1–5

[45] Cheng Y , Sakai N , Hanzawa T . Effects of dielectric properties on temperature distributions in food model during microwave heating. Food Science & Technology International, 1997, 3(4): 324–328

[46] Zhou J , Wang Y , Yang X Q . Shape optimization of microwave cavity using arbitrary Lagrangian-Euler method to improve the heating uniformity. IEEE Transactions on Microwave Theory and Techniques, 2021, 70(3): 1932–1942

[47] NoordinA A MMasrieMNorjihanTBurhamN. Simulation of various cylindrical size and inlet velocity affect the laminar flow in microchannel. In: 2021 IEEE Regional Symposium on Micro and Nanoelectronics (RSM). New York: IEEE, 2021, 173–176

[48] Chatterjee A , Basak T , Ayappa K G . Analysis of microwave sintering of ceramics. AIChE Journal, 1998, 44(10): 2302–2311

[49] Akhtar M J , Feher L E , Thumm M . Noninvasive procedure for measuring the complex permittivity of resins, catalysts, and other liquids using a partially filled rectangular waveguide structure. IEEE Transactions on Microwave Theory and Techniques, 2009, 57(2): 458–470

[50] Ku H S , Ball J A R , Siores E , Horsfield B . Microwave processing and permittivity measurement of thermoplastic composites at elevated temperature. Journal of Materials Processing Technology, 1999, 89: 419–424

[51] Pozar D M . Microwave Engineering. 4th ed. Newyork: John Wiley & Sons, 2012, 261–267

RIGHTS & PERMISSIONS

Higher Education Press