Three-dimensional finite element modeling of a maxillary premolar tooth based on the micro-CT scanning: A detailed description

Abstract

This study describes the details of how to construct a three-dimensional (3D) finite element model of a maxillary first premolar tooth based on micro-CT data acquisition technique, MIMICS software and ANSYS software. The tooth was scanned by micro-CT, in which 1295 slices were obtained and then 648 slices were selected for modeling. The 3D surface mesh models of enamel and dentin were created by MIMICS (STL file). The solid mesh model was constructed by ANSYS. After the material properties and boundary conditions were set, a loading analysis was performed to demonstrate the applicableness of the resulting model. The first and third principal stresses were then evaluated. The results showed that the number of nodes and elements of the finite element model were 56 618 and 311801, respectively. The geometric form of the model was highly consistent with that of the true tooth, and the deviation between them was −0.28%. The loading analysis revealed the typical stress patterns in the contour map. The maximum compressive stress existed in the contact points and the maximum tensile stress existed in the deep fissure between the two cusps. It is concluded that by using the micro-CT and highly integrated software, construction of the 3D finite element model with high quality will not be difficult for clinical researchers.

Keywords

three-dimensional finite element / micro-CT / premolar / MIMICS / ANSYS

References

[1] TurnerMS, CloughRW, MartinHC, et al.. Stiffness and deflection analysis of complex structures. J Aero Sci, 1956, 23(9): 805-809

[2] ThresherRW, SaitoGE. The stress analysis of human teeth. J Biomech, 1973, 6(5): 443-449

[3] FarahJW, CraigRG, SikarskieDL. Photoelastic and finite element stress analysis of a restored axisymmetric first molar. J Biomech, 1973, 6(5): 511-520

[4] AusielloP, RengoS, DavidsonCL, et al.. Stress distributions in adhesively cemented ceramic and resin-composite Class II inlay restorations: a 3D-FEA study. Dent Mater, 2004, 20(9): 862-872

[5] CattaneoPM, DalstraM, MelsenB. The transfer of occlusal forces through the maxillary molars: a finite element study. Am J Orthod Dentofacial Orthop, 2003, 123(4): 367-373

[6] TantbirojnD, VersluisA, PintadoMR, et al.. Tooth deformation patterns in molars after composite restoration. Dent Mater, 2004, 20(6): 535-542

[7] KowalczykP. Influence of the shape of the layers in photo-cured dental restorations on the shrinkage stress peaks-FEM study. Dent Mater, 2009, 25(12): e83-91

[8] ShawAM, SameshimaGT, VuHV. Mechanical stress generated by orthodontic forces on apical root cementum: a finite element model. Orthod Craniofac Res, 2004, 7(2): 98-107

[9] AusielloP, ApicellaA, DavidsonCL. Effect of adhesive layer properties on stress distribution in composite restorations—a 3D finite element analysis. Dent Mater, 2002, 18(4): 295-303

[10] BorcicJ, AnicI, SmojverI, et al.. 3D finite element model and cervical lesion formation in normal occlusion and in malocclusion. J Oral Rehabil, 2005, 32(7): 504-510

[11] GaoY, PetersOA, WuH, et al.. An application framework of three-dimensional reconstruction and measurement for endodontic research. J Endod, 2009, 35(2): 269-274

[12] RodriguesFP, LiJ, SilikasN, et al.. Sequential software processing of micro-XCT dental-images for 3D-FE analysis. Dent Mater, 2009, 25(6): e47-e55

[13] RhodesJS, FordTR, LynchJA, et al.. Micro-computed tomography: a new tool for experimental endodontology. Int Endod J, 1999, 32(3): 165-170

[14] GelaudeF, Vander SlotenJ, LauwersB. Accuracy assessment of CT-based outer surface femur meshes. Comput Aided Surg, 2008, 13(4): 188-199

[15] JiW, ChenZ, FrenckenJE. Strength of tunnel-restored teeth with different materials and marginal ridge height. Dent Mater, 2009, 25(11): 1363-1370

[16] TajimaK, ChenKK, TakahashiN, et al.. Three-dimensional finite element modeling from CT images of tooth and its validation. Dent Mater J, 2009, 28(2): 219-226

[17] GoelVK, KheraSC, RalstonJL, et al.. Stresses at the dentinoenamel junction of human teeth—a finite element investigation. J Prosthet Dent, 1991, 66(4): 451-459

[18] Clementino-LuedemannTN, KunzelmannKH. Mineral concentration of natural human teeth by a commercial micro-CT. Dent Mater J, 2006, 25(1): 113-119

[19] NakajimaA, MurataM, TanakaE, et al.. Development of three-dimensional FE modeling system from the limited cone beam CT images for orthodontic tipping tooth movement. Dent Mater J, 2007, 26(6): 882-891