Aerodynamic performance of high-speed maglev trains traversing arc-shaped porous barriers under crosswind

Abstract

Under strong crosswind conditions, as a 600 km/h high-speed maglev train traverses an arc-shaped porous barrier, the train experiences abrupt and drastic changes in aerodynamic loads. To investigate this phenomenon, a three-dimensional transient computational fluid dynamics (CFD) model was developed, in which an overset grid technique combined with the improved delayed detached eddy simulation (IDDES) method was employed to simulate the coupled crosswind–train–bridge–barrier system. How barrier aperture and train speed influence aerodynamic force coefficients and flow field evolution is examined in this study. It is demonstrated that significantly greater abrupt changes amplitudes and peak change rates in aerodynamic coefficients during train entry and exit are caused by a solid barrier compared to a porous barrier, with the most intense dynamic response being shown by the tail car. Behind the solid barrier, lower mean values but higher fluctuations are exhibited by aerodynamic loads. The dynamic impact is intensified by increasing train speed, following a power-law growth, while both the mean and statistical dispersion of aerodynamic coefficients are elevated by enlarging the barrier aperture. A fundamental difference in wake flow is identified: Initial vortices are weakened and flow reorganization is promoted by the porous barrier, whereas larger-scale vortex shedding is induced by the solid barrier. Consequently, a greater pressure differential across the car body is produced under the solid barrier condition. An empirical basis for designing targeted measures to enhance the operational aerodynamic stability of high-speed maglev trains is provided by these findings.

Keywords

600 km/h high-speed maglev train / Arc-shaped porous barrier / Nonlinear aerodynamic coupling / Vortex structure evolution / Dynamic overset grid / IDDES simulation

References

[1] Yang W, Liu Y, Deng E, et al.. Field test and numerical reconstitution of natural winds at the tunnel entrance section of high-speed railway. Int J Numer Meth Heat Fluid Flow, 2023, 33(2): 617-647

[2] Yang W, Liu Y, Deng E, et al.. Characteristics of wind field at tunnel-bridge area in steep valley: field measurement and LES study. Measurement, 2022, 202: 111806

[3] Liu Z, Liu T, Gao H, et al.. Flow characteristics and wind-sheltering performance of wind barriers with different diameters of holes on railway viaducts. Int J Numer Meth Heat Fluid Flow, 2023, 33(11): 3748-3769

[4] Han S, Zhang J, Xiong X, et al.. Influence of high-speed maglev train speed on tunnel aerodynamic effects. Build Environ, 2022, 223: 109460

[5] Zhang J, Guo B, Wang Y, et al.. A novel vented tunnel hood with decreasing open ratio to mitigate micro-pressure wave emitted at high-speed maglev tunnel exit. J Wind Eng Ind Aerodyn, 2023, 240: 105459

[6] Zhang J, Guo B, Wang Y, et al.. Influence of arch lattice-shell hood length on micro-pressure waves at portal of a high-speed maglev tunnel. Phys Fluids, 2024, 36(9): 096105

[7] Wang KW, Chen G, Wen C-Y, et al.. Mitigation mechanism of porous media hood for the sonic boom emitted from maglev tunnel portals. Phys Fluids, 2024, 36(10): 106134

[8] Chen ZW, Guo ZH, Ni YQ, et al.. A suction method to mitigate pressure waves induced by high-speed maglev trains passing through tunnels. Sustain Cities Soc, 2023, 96: 104682

[9] Li W, Gu Y, Zhao W, et al.. Alleviating tunnel aerodynamics through hybrid suction & blowing techniques applied to train nose sections. J Wind Eng Ind Aerodyn, 2025, 256: 105961

[10] Li X, Wu Z, Yang J, et al.. Experimental study on transient pressure induced by high-speed train passing through an underground station with adjoining tunnels. J Wind Eng Ind Aerodyn, 2022, 224: 104984

[11] Liang XF, Chen G, Li XB, et al.. Numerical simulation of pressure transients caused by high-speed train passage through a railway station. Build Environ, 2020, 184: 107228

[12] Bi H, Wang Z, Wang H, et al.. Aerodynamic phenomena and drag of a maglev train running dynamically in a vacuum tube. Phys Fluids, 2022, 34(9): 096111

[13] Zhou D, Wu L, Tan C, et al.. Study on the effect of dimple position on drag reduction of high-speed maglev train. Transp Saf Environ, 2021, 3(4): tdab027

[14] Che ZX, Huang S, Li ZW, et al.. Aerodynamic drag reduction of high-speed maglev train based on air blowing/suction. J Wind Eng Ind Aerodyn, 2023, 233: 105321

[15] Liu Y, Yang W, Deng E, et al.. Aerodynamic impacts of high-speed trains on city-oriented noise barriers: a moving model experiment. Alex Eng J, 2023, 68: 343-364

[16] Liu Y, Yang W, Deng E, et al.. Aerodynamic characteristics of the train–SENB (semi-enclosed noise barrier) system: a high-speed model experiment and LES study. J Wind Eng Ind Aerodyn, 2023, 232: 105251

[17] Chen Y, Ge J, Liu S. Aerodynamic noise simulation of a high-speed maglev train operating inside a fully enclosed sound barrier. J Appl Fluid Mech, 2023, 16(3): 413-427

[18] Cheng S, Ge J, Zhang G, et al.. Separation of turbulent pressure and acoustic pressure on a maglev train window and the contribution of interior noise at high speeds. Appl Acoust, 2025, 231: 110465

[19] Liu C, Su H, Wang C, et al.. Vibration control of disturbance gap for maglev vehicle considering stiffness change under unsteady aerodynamic forces. Nonlinear Dyn, 2023, 111(5): 4267-4282

[20] Feng Y, Zhao C, Peng Y, et al.. Influence of levitation bogie structure aerodynamic loads on the dynamic performance of 600 km/h EMS maglev train. J Wind Eng Ind Aerodyn, 2025, 261: 106070

[21] Huang ZD, Zhou ZB, Chang N, et al.. Aerodynamic features of high-speed maglev trains with different marshaling lengths running on a viaduct under crosswinds. Comput Model Eng Sci, 2024, 140(1): 975-996

[22] Liu Z, Zhang X, Chen T, et al.. Aerodynamic loads and bridge responses under train passage: case study of an overpass steel box-girder cable-stayed bridge. Adv Bridge Eng, 2022, 3(1): 1

[23] Zhu F, Xie J, Lv D, et al.. Transient aerodynamic behavior of a high-speed Maglev train in plate braking under crosswind. Phys Fluids, 2024, 36(3): 035133

[24] Guo ZJ, Guo ZH, Chen ZW, et al.. On the active flow control in maglev train safety under crosswinds: analysis of leeward suction and blowing action. Phys Fluids, 2024, 36(9): 095130

[25] Zhang L, Gao Y, Lin TT, et al.. Comparative analysis of crosswind influence on aerodynamic characteristics of superconducting and normal-conducting high-speed maglev trains. J Wind Eng Ind Aerodyn, 2025, 265: 106182

[26] He H, Yang WC, Liu YK, et al.. Three-dimensional trajectories of irregular-shaped tunnel lining fragments in the flow environment caused by high-speed trains. Phys Fluids, 2024, 36(8): 085193

[27] Deng E, Liu YK, Yang WC, et al.. Reproducing the flight behavior of falling debris from railway tunnel vault using a high-speed train ejection experiment and moving-overset-mesh simulation. Tunn Undergr Space Technol, 2024, 147: 105670

[28] Guo Z, Liu T, Liu Z, et al.. An IDDES study on a train suffering a crosswind with angles of attack on a bridge. J Wind Eng Ind Aerodyn, 2021, 217: 104735

[29] Spalart PR. Detached-eddy simulation. Annu Rev Fluid Mech, 2009, 41: 181-202

[30] Yang W, Ouyang D, Deng E, et al.. Aerodynamic characteristics of two noise barriers (fully enclosed and semi-enclosed) caused by a passing train: a comparative study. J Wind Eng Ind Aerodyn, 2022, 226: 105028

Funding

Innovative Research Group Project of the National Natural Science Foundation of China(51978670)

Science and Technology Research and Development Program Project(Major Project)

Science and Technology Research and Development Program Project of China railway group limited(Major Project)

Science and Technology Research and Development Program Project of China railway(N2024G018)

Rights & permissions

The Author(s)

Just Accepted

This article has successfully passed peer review and final editorial review, and will soon enter typesetting, proofreading and other publishing processes. The currently displayed version is the accepted final manuscript. The officially published version will be updated with format, DOI and citation information upon launch. We recommend that you pay attention to subsequent journal notifications and preferentially cite the officially published version. Thank you for your support and cooperation.