Thermal–environmental effects on degradation of railway ballast aggregates: a climate change perspective

Hamidreza Heydari , Morteza Esmaeili , Sina Nadermohammady

Railway Engineering Science ›› : 1 -18.

PDF
Railway Engineering Science ›› :1 -18. DOI: 10.1007/s40534-025-00412-5
Article
research-article

Thermal–environmental effects on degradation of railway ballast aggregates: a climate change perspective

Author information +
History +
PDF

Abstract

Climate change represents one of the most significant challenges affecting the behavior of materials and infrastructures. This phenomenon can lead to excessive increases or decreases in temperature, heightened sandstorms, increased sulfate attacks and exacerbated freeze–thaw cycles. Among the infrastructures perennially exposed to climate change are railway tracks. In ballasted railway tracks, the ballast layer is affected by various factors such as freezing and thawing, extreme temperatures and attacks by various sulfate salts which can accelerate the degradation of ballast aggregates. Considering that most of the maintenance costs of railway tracks are associated with the deterioration of the ballast layer, the impact of climate change and environmental conditions on ballast durability is examined in the current study. To achieve this goal, a comprehensive experimental investigation was conducted through a series of laboratory tests. Specifically, the durability of ballast aggregates under various states, including environmental temperature changes ranging from −20 °C to+100 °C, freeze–thaw cycles, and sulfate attacks, was assessed by simulating these conditions in a laboratory environment. The durability properties of ballast in these conditions were evaluated using different indices such as Los Angeles abrasion, micro-Deval wear, crushing resistance, impact performance, and breakage potential. The results indicate that the durability performance under sulfate attacks, freeze–thaw cycles, and extreme cold and warm temperatures deteriorated by an average of 50%, 20%, 40%, and 35%, respectively. Interestingly, the obtained results also led to a series of insightful empirical formulations to estimate the ballast degradation indices accounting for the impacts of thermal and environmental conditions. These findings highlight a notable impact of thermal and environmental conditions on the durability of ballast aggregates.

Keywords

Railway infrastructures / Climate change / Ballast aggregates / Thermal–environmental conditions / Sustainability design

Cite this article

Download citation ▾
Hamidreza Heydari, Morteza Esmaeili, Sina Nadermohammady. Thermal–environmental effects on degradation of railway ballast aggregates: a climate change perspective. Railway Engineering Science 1-18 DOI:10.1007/s40534-025-00412-5

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Eddowes MJ , Waller D, Taylor P, et al (2003) Safety implications of weather, climate and climate change. Railway safety and standards board, 2003. http://www.climate-change-uk.info/sites/RailSafetyclimatechange.pdf. Accessed 8 September 2024

[2]

Parkman P (2008) Assesing the impact of climate change on transport infrastructure. Railway safety and standards board, 2008. https://www.railwaysarchive.co.uk/documents/RSSB_ClimateChangeInfrastructure2008.pdf. Accessed 8 September 2024

[3]

Ngamkhanong C, Kaewunruen S, Costa B. State-of-the-art review of railway track resilience monitoring. Infrastructures, 2018, 3(1): 3

[4]

Quinn JA, Hodgkinson S, Ferranti EJS et al (2017) Rail Adapt: adapting the railway for the future. International Union of Railways (UIC). https://uic.org/IMG/pdf/railadapt_final_report.pdf. Accessed 8 September 2024

[5]

Stipanovic I, ter Maat H, Hartmann A et al (2013) Risk assessment of climate change impacts on railway. In: Engineering project organization conference, devil’s thumb ranch, Colorado, July 9–11, 2013

[6]

Esmaeili M, Noghabi HH. Investigating seismic behavior of ballasted railway track in earthquake excitation using finite-element model in three-dimensional space. J Transp Eng, 2013, 1397697-708

[7]

Kish A (2011) On the fundamentals of track lateral resistance. In: Proceedings of the AREMA 2011 Annual Conference, Minneapolis, MN, September 18–21, 2011

[8]

Yang G, Bradford MA. Thermal-induced buckling and postbuckling analysis of continuous railway tracks. Int J Solids Struct, 2016, 97–98: 637-649

[9]

Heydari H. Evaluating the dynamic behavior of railway-bridge transition zone: numerical and field measurements. Can J Civ Eng, 2024, 51(4): 399-408

[10]

Bruno L, Horvat M, Raffaele L. Windblown sand along railway infrastructures: a review of challenges and mitigation measures. J Wind Eng Ind Aerodyn, 2018, 177: 340-365

[11]

Heydari H, Naseri R, Khanie N. Investigating the effect of ballast contamination in vertical and shear interlocking stiffness: experimental and numerical study. Constr Build Mater, 2024, 428 136337

[12]

Heydari H, Khanie N, Naseri R. Formulation and evaluation of the ballast shear interlocking coefficient based on analytical, experimental, and numerical analyses. Constr Build Mater, 2023, 406 133457

[13]

Jokūbaitis A, Marčiukaitis G, Valivonis J. Influence of technological and environmental factors on the behaviour of the reinforcement anchorage zone of prestressed concrete sleepers. Constr Build Mater, 2016, 121: 507-518

[14]

Souza RN, de Castro XG, de Oliveira Borges da Costa K,et al.. Comparison of the permeability of potential ballast rocks from northern Rio de Janeiro state under different fouling rates after sodium sulfate attack. Materials, 2023, 16(10): 3806

[15]

Dyer M. Performance of flood embankments in England and Wales. Proc Inst Civ Eng Water Manag, 2004, 1574177-186

[16]

Polemio M, Lollino P. Failure of infrastructure embankments induced by flooding and seepage: a neglected source of hazard. Nat Hazards Earth Syst Sci, 2011, 11(12): 3383-3396

[17]

Guo Y, Markine V, Song Jet al.. Ballast degradation: effect of particle size and shape using Los Angeles abrasion test and image analysis. Constr Build Mater, 2018, 169: 414-424

[18]

Shi C, Fan Z, Connolly DPet al.. Railway ballast performance: recent advances in the understanding of geometry, distribution and degradation. Transp Geotech, 2023, 41 101042

[19]

Michas G (2012) Slab track systems for high-speed railways. Disserataion, Royal Institute of Technology (KTH)

[20]

Heydari-Noghabi H, Varandas JN, Ali Zakeri Jet al.. Performance evaluation of a combined transition system in slab-ballasted railway track using a vehicle-track-substructure interaction model. KSCE J Civ Eng, 2023, 27(9): 3848-3860

[21]

Lim N-H, Park N-H, Kang Y-J. Stability of continuous welded rail track. Comput Struct, 2003, 81(22–23): 2219-2236

[22]

Esmaeili M, Heydari H, Mokhtari Met al.. Shear strength characteristics of mixing slag-stone ballast reinforcement with tire geo-scrap using large-scale direct shear tests. Railw Eng Sci, 2025, 33(1): 94-107

[23]

Liu H, Xiao J, Wang Pet al.. Experimental investigation of the characteristics of a granular ballast bed under cyclic longitudinal loading. Constr Build Mater, 2018, 163: 214-224

[24]

Kondratov V, Solovyova V, Stepanova I. The development of a high performance material for a ballast layer of a railway track. Procedia Eng, 2017, 189: 823-828

[25]

Heydari H, Zakeri J, Esmaeili M. Evaluating the elastic sleeper efficiency in reduction of railway ground vibrations by in situ impact-response test. Int J Veh Noise Vib, 2021, 17(3–4): 237

[26]

Czinder B, Török Á. Effects of long-term magnesium sulfate crystallisation tests on abrasion and durability of andesite aggregates. Bull Eng Geol Environ, 2021, 80128891-8901

[27]

Li X, Yan Y, Ji S. Mechanical properties of frozen ballast aggregates with different ice contents and temperatures. Constr Build Mater, 2022, 317 125893

[28]

Köken E, Özarslan A, Bacak G. An experimental investigation on the durability of railway ballast material by magnesium sulfate soundness. Granul Matter, 2018, 20(2): 29

[29]

Liu J, Wang P, Liu Get al.. Numerical and experimental investigations of the effect of temperature and moisture on the repose angle of railway ballast. Proc Instit Mech Eng, Part F: J Rail Rapid Transit, 2022, 2366703-714

[30]

Liu J, Wang P, Liu Get al.. Study of the characteristics of ballast bed resistance for different temperature and humidity conditions. Constr Build Mater, 2021, 266 121115

[31]

Esmaeili M, Heydari H, Darvishi Set al.. Investigating effects of tire geo-scrap reinforcement on shear strength characteristics of railway ballast using large-scale direct shear test. Int J Rail Transp, 2025, 13(1): 1-22

[32]

British Standards Institution. Tests for thermal and weathering properties of aggregates Part 3: Boiling test for “Sonnenbrand” basalt (BS EN 1367–3), 2001, London, British Standards Institution

[33]

British Standards Institution. Tests for thermal and weathering properties of aggregates— Part 1: Determination of resistance to freezing and thawing (BS EN 1367–1), 1999, London, British Standards Institution

[34]

Cliff Mass Weather Blog (2012) Soil temperatures and gardening. https://cliffmass.blogspot.com/2012/05/soil-temperatures-and-gardening.html. Accessed 8 September 2024

[35]

British Standards Institution. Tests for thermal and weathering properties of aggregates— Part 2: Magnesium sulfate test (BS EN 1367–2), 2009, London, British Standards Institution

[36]

Sivakumar MVK, Das HP, Brunini O. Impacts of present and future climate variability and change on agriculture and forestry in the arid and semi-arid tropics. Clim Change, 2005, 70: 31-72

[37]

Liu J, Liu Z, Wang Pet al.. Dynamic characteristics of the railway ballast bed under water-rich and low-temperature environments. Eng Struct, 2022, 252 113605

[38]

Associação Brasileira de Normas Técnicas. Railway-ballast-requirements and test methods (NBR 5564:2021), 2021, Rio de Janeiro, ABNT

[39]

British Standards Institution (2010) Tests for mechanical and physical properties of aggregates-Methods for the determination of resistance to fragmentation (BS EN 1097–2). London, UK

[40]

British Standards Institution (2011) Tests for mechanical and physical properties of aggregates-Determination of the resistance to wear (micro-Deval) (BS EN 1097–1). London, UK

[41]

Bureau of Indian Standards (1963) Methods of test for aggregates for concrete, Part 4: Mechanical properties (IS 2386–4:1963). Bureau of Indian Standards, New Delhi

[42]

Indraratna B, Rujikiatkamjorn C, Salim W. Advanced rail geotechnology: ballasted track, 2011, Boca Raton, CRC Press

[43]

Lade PV, Yamamuro JA, Bopp PA. Significance of particle crushing in granular materials. J Geotech Eng, 1996, 122(4): 309-316

[44]

Lee KL, Farhoomand I. Compressibility and crushing of granular soil in anisotropic triaxial compression. Can Geotech J, 1967, 4(1): 68-86

[45]

Marsal RJ. Large scale testing of rockfill materials. J Soil Mech And Found Div, 1967, 93(2): 27-43

[46]

Guo Y, Xie J, Fan Zet al.. Railway ballast material selection and evaluation: a review. Constr Build Mater, 2022, 344 128218

[47]

Alves HC, Gomes GJC. Weathering resistance of Linz-donawitz (LD) slag as ballast material using freeze-thaw and sulfate soundness. Transp Geotech, 2023, 40 100973

RIGHTS & PERMISSIONS

The Author(s)

PDF

2

Accesses

0

Citation

Detail

Sections
Recommended

/