Analysis of positioning of wayside charging stations for hybrid locomotive consists in heavy haul train operations

Abstract

Hybrid locomotive concepts have been considered as a step towards converting the railway industry into a green transport mode. One of the challenges in integrating a hybrid locomotive in the train consist is that the battery pack in the locomotive needs to be recharged during a long-haul trip which requires stopping of the train. A typical battery pack requires about 1 h to recharge which is unacceptable. With the improvement in the charging system, it is now possible that the same capacity battery pack could be recharged in 10–12 min which can be a competitive option for the railway companies. This paper proposes a method based on simulation to evaluate the positioning of charging stations on a train network. A typical example of a heavy haul train operation hauled by diesel-electric and hybrid locomotives is used to demonstrate the method by using simulation softwares. The result of the simulation study show that the method developed in this paper can be used to evaluate the state of charge (SoC) status of a hybrid locomotive along the track. It is also shown that the SoC status obtained by the simulation method can be further used to assess the positions of charging stations along the track at the design stage.

Keywords

Hybrid locomotive / Wayside charging station / Co-simulation / Multibody Simulation

References

[1.] Nelson RF. Power requirements for batteries in hybrid electric vehicles. J Power Sources, 2000 91 1 2-26

[2.] Lawson LJ, Cook LM (1979) Wayslde energy storage study, volume IV—dual mode locomotive: preliminary design study. U.S. Department of Transportation, Federal Railroad Administration

[3.] Battery University (2020) BU-401a: fast and ultra-fast chargers. https://batteryuniversity.com/learn/article/ultra_fast_chargers

[4.] Ahmed S Bloom I Jansen AN Tanim T Dufek EJ Pesaran A . Enabling fast charging—a battery technology gap assessment. J Power Sources, 2017 367 250-262

[5.] Bosomworth C, Spiryagin M, Alahakoon S, Cole C (2017) The effect of vehicle dynamics on rail foot flaw detection. In: Proceedings of the 25th international symposium on dynamics of vehicles on roads and tracks (IAVSD 2017), Rockhampton, Australia

[6.] Spiryagin M, Wu Q, Bosomworth C, Cole C, Wolfs P, Hayman M, et al (2019) Understanding the impact of high traction hybrid locomotive designs on heavy haul train performance. In: the AusRAIL PLUS Conference, Sydney, 3–5 December 2019

[7.] Spiryagin M Persson I Wu Q Bosomworth C Wolfs P Cole C. A co-simulation approach for heavy haul long distance locomotive-track simulation studies. Veh Syst Dyn, 2019 57 9 1363-1380

[8.] DEsolver AB (2020) Gensys.1908. http://gensys.se/news/rel.1908/index.html#

[9.] Sun Y Cole C Spiryagin M Godber T Hames S Rasul M. Conceptual designs of hybrid locomotives for application as heavy haul trains on typical track lines. Proc Inst Mech Eng Part F J Rail Rapid Transit, 2013 227 5 439-452

[10.] Spiryagin M Wolfs P Cole C Spiryagin V Sun Y McSweeney T. Design and simulation of heavy haul locomotives, 2017 Boca Raton CRC Press

[11.] Spiryagin M Polach O Cole C. Creep force modelling for rail traction vehicles based on the Fastsim algorithm. Veh Syst Dyn, 2013 51 11 1765-1783

[12.] Federal Railroad Administration (2017) Track and rail and infrastructure integrity compliance manual, volume II Track safety standards, Chapter 1: track safety standards, classes 1 through 5. Federal Railroad Administration

[13.] Spiryagin M, Wolfs P, Wu Q, Cole C, McSweeney T, Bosomworth C (2020) Rapid charging energy storage system for a hybrid freight locomotive. In: Proceedings of the 2020 ASME joint rail conference, St. Louis, MO, USA

[14.] Spiryagin M Wu Q Wolfs P Sun Y Cole C. Comparison of locomotive energy storage systems for heavy-haul operation. Int J Rail Transp, 2018 6 1 1-15

[15.] Spiryagin M Wolfs P Szanto F Cole C. Simplified and advanced modelling of traction control systems of heavy-haul locomotives. Veh Syst Dyn, 2015 53 5 672-691

[16.] Cole C Spiryagin M Wu Q Sun Y. Modelling, simulation and applications of longitudinal train dynamics. Veh Syst Dyn, 2017 55 10 1498-1571

[17.] Brady M (2017) Assessment of battery technology for rail propulsion application, DOT/FRA/ORD-17/12. U.S. Department of Transportation, Federal Railroad Administration

[18.] Li H Peng J Liu W Huang Z. Stationary charging station design for sustainable urban rail systems: a case study at Zhuzhou Electric Locomotive Co., China. Sustainability, 2015 7 1 465-481