Grating writing in structured optical fibers is reviewed. Various laser sources have been used including UV and near IR nanosecond and femtosecond lasers, each enabling different material processing regimes. The issue of scattering is modeled through simulation and compared with experiment. Good agreement has been established.
A new optical intensity-based sensing mechanism for the measurement of refractive index and minute displacement is proposed in this paper, which is based on modifying the amount of light coupled between two parallel long-period fiber gratings. The characteristics of this sensing mechanism with experiments and simulation results are demonstrated.
Broadband, high-speed wavelength-swept lasers can substantially enhance applications in optical coherence tomography, chemical spectroscopy, and fiber-optic sensing. We report the demonstration of Fourier-domain mode-lock lasers operating at about 90 kHz effective sweep rate over a 158 nm sweep range using a single-band design and over a 284 nm sweep range across the 1.3 μm to 1.5 μm wavelength spectrum using a unique broadband design. A novel dual-detection full-range Fourier-domain optical coherence tomography system is developed which provides 7 μm axial resolution (in air) at about 90 kHz axial scan rate for mirror-image resolved Doppler imaging in a human finger and an African frog tadpole.
A loop topology based white light interferometric sensor network for perimeter security has been designed and demonstrated. In the perimeter security sensing system, where fiber sensors are packaged in the suspended cable or buried cable, a bi-directional optical path interrogator is built by using Michelson or Mach-Zehnder interferometer. A practical implementation of this technique is presented by using an amplified spontaneous emission (ASE) light source and standard single mode fiber, which are common in communication industry. The sensor loop topology is completely passive and absolute length measurements can be obtained for each sensing fiber segment so that it can be used to measure quasi-distribution strain perturbation. For the long distance perimeter monitoring, this technique not only extends the multiplexing potential, but also provides a redundancy for the sensing system. One breakdown point is allowed in the sensor loop because the sensing system will still work even if the embedded sensor loop breaks somewhere.