Multi-channel monolithic integrated optic fiber Bragg grating sensor interrogator

Abstract

Fiber Bragg grating (FBG) is a mature sensing technology for the measurement of strain, vibration, acoustics, acceleration, pressure, temperature, moisture, and corrosion. It has gained rapid acceptance in civil, aerospace, chemical and petrochemical, medicine, aviation and automotive industries. The most prominent advantages of FBG are: small size and light weight, distributed array of FBG transducers on a single fiber, and immunity to radio frequency interference. However, a major disadvantage of FBG technology is that conventional state-of-the-art FBG interrogation system is typically bulky, heavy, and costly bench top instruments that are typically assembled from off-the-shelf fiber optic and optical components integrated with a signal electronics board into an instrument console. Based on the industrial need for a compact FBG interrogation system, this paper describes recent progress towards the development of miniature fiber Bragg grating sensor interrogator (FBG-Transceiver™) system based on multi-channel monolithic integrated optic sensor microchip technology. The integrated optic microchip technology enables monolithic integration of all functionalities, both passive and active, of conventional bench top FBG sensor interrogator system, packaged in a miniaturized, low power operation, 2 cm×5 cm small form factor (SFF) package suitable for long-term structural health monitoring in applications where size, weight, and power are critical for operation.

Keywords

Integrated optics / monolithic / fiber sensors / structural health monitoring / small size / light weight / low power

References

[1] Trutzel M. N., Wauer K., Betz D., Staudigel L., Krumpholz O., Muehlmann H. C., Muellert T., Gleine W.. Smart sensing of aviation structures with fiber-optic Bragg grating sensors. Proc. SPIE, 2000, 3986, 134-143.

[2] Z. Zhou and J. Ou, “Development of FBG sensors for structural health monitoring in civil infrastructures,” presented at Proceeding of North American Euro-Pacific Workshop “Sensing Issues in Civil Structural Health Monitoring”, Waikiki Beach, Oahu, Hawaii, USA, Nov. 11–13, 2004.

[3] T. Bowker and M. Shaw, “Beyond telecom: FBGs find use in oil and gas industries,” Laser Focus World, May, 2003.

[4] Moyo P., Brownjohn J. M. W., Suresh R., Tjin S. C.. Development of fiber Bragg grating sensors for monitoring civil infrastructure. Engineering Structures, 2005, 27(12): 1828-1834.

[5] M. Seaver, S. T. Trickey, and J. M. Nichols, “Strain measurements from FBGs embedded in rotating composite propeller blades,” in Optical Fiber Sensors, OSA Technical Digest (CD) (Optical Society of America, 2006), paper ThD2.

[6] Leng J. S., Barnes R. A., Hameed A., Winter D., Tetlow J., Mays G. C., Fernando G. F.. Structural NDE of concrete structures using protected EFPI and FBG sensors. Sensors and Actuators A, 2006, 126(2): 340-347.

[7] Dianov E. M.. Fiber optics: from communications to ‘nervous’ systems. Herald of the Russian Academy of Sciences, 2007, 77(4): 368-372.

[8] Hao J., Jayachandran M., Ni N., Phua J., Liew H. M., Aung P. W. A., Biswas J., Foo S. F., Low J. A., Yap P.. An intelligent elderly healthcare monitoring system using fiber-based sensors. Journal of the Chinese Institute of Engineers, 2010, 33(5): 653-660.

[9] DoD 2005 SBIR solicitation, “Miniaturization of a Fiber Bragg Grating Sensor Interrogator,” Navy Topic No. N05-115.

[10] E. A. Mendoza, “Miniaturization of an optical fiber grating sensor interrogator,” Navy SBIR Phase II Contract No. N68335-06-C-0049, 2007.

[11] J. Buswell, “Lessons learned from health monitoring of rocket motors,” presented at 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA 2005-4558, July 2005.

[12] E. A. Mendoza, “Fiber Bragg gratingsensor interrogator method,” United States Patent, Patent 7,512,291, 2009.