The role of resins in crude oil rheology and flow assurance: A comprehensive review

Abstract

Resins are a significant component of crude oil, distinct from asphaltenes, and play a crucial role in influencing both rheological properties and flow characteristics. Understanding resin behavior is particularly important in crude oil operations and offshore operations, where flow assurance challenges can arise. This review article focuses on the impact of resins on the flow and rheological properties of crude oil. It examines the various compositions of resins and the molecular interactions between resins and asphaltenes that determine the viscosity and stability of crude oil. The presence of high concentrations of resins in certain crude oils can complicate flow assurance and pipeline transportation. Recent advancements in chemical treatments and additive technologies have addressed these challenges. This review highlights emerging research areas and technologies aimed at improving the understanding of resin behavior under extreme conditions, such as high-pressure and high-temperature reservoirs. Through this comprehensive analysis, the review aims to provide valuable insights into the role of resins in crude oil flow, guiding future research and innovations in petroleum engineering.

Keywords

Resins / Crude oil / Flow assurance / Asphaltene stabilization / Rheology / Pipeline transportation

CRediT authorship contribution statement

H.A. El Nagy: Writing-review & editing, Validation, Project administration, Investigation, Formal analysis. Elsayed H. Eltamany: Supervision, Project administration, Investigation. Mostafa A.A. Mahmoud: Visualization, Data curation, Conceptualization. Ahmed Z. Ibrahim: Conceptualization, Writing-original draft, Resources, Methodology, Data curation. Sherin A.M. Ali: Writing-review & editing, Investigation, Data curation.

Declaration of competing interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Acknowledgements

The authors gratefully acknowledge the financial support provided by Southwest Petroleum University (SWPU) for sponsoring the publication of this paper.

References

[1] F.A.M.M. Gonçalves, M. Santos, Advances in the development of biobased epoxy resins: insight into more sustainable materials and future applications, Int. Mater. Rev. 68 (2) (2022) 136-170.

[2] I. Khelil, A.A. Al-Muntaser, M.A. Varfolomeev, M.H. Hakimi, Innovations in crude-oil characterization: a comprehensive review of LF-NMR applications, Energies 17 (4) (2024) 905.

[3] J.J. Adams, J.F. Rovani, J.-P. Planche, J. Loveridge, A. Literati, I. Shishkova, G. Palichev, I. Kolev, K. Atanassov, S. Nenov, et al., SAR-AD method to characterize eight SARA fractions in various vacuum residues and follow their transformations occurring during hydrocracking and pyrolysis, Processes 11 (2023) 1220.

[4] Jinhong Zhang, Yuanyu Tian, Yingyun Qiao, Chaohe Yang, Honghong Shan, Structure and reactivity of Iranian vacuum residue and its eight group-fractions, Energy Fuels 31 (2017), https://doi.org/10.1021/acs.energyfuels.7b01327.

[5] I. Shishkova, D. Stratiev, I.V. Kolev, S. Nenov, D. Nedanovski, K. Atanassov, V. Ivanov, S. Ribagin, Challenges in petroleum characterization — a review, Energies 15 (20) (2022) 7765, https://doi.org/10.3390/en15207765.

[6] R. Xiong, J. Guo, W. Kiyingi, C. Gao, L. Wang, J. Luo, Technical transformation of heavy/ultra-heavy oil production in China driven by low carbon goals: a review, J. Clean. Prod. 447 (2024) 140992. https://doi.org/10.1016/j.jclepro.2023.140992.

[7] X. Luo, S. Wu, D. Wang, Y. Yun, et al., Sustainable development of cutting fluids: the comprehensive review of vegetable oil, J. Clean. Prod. 433 (2024) 140551.

[8] B. Upreti, B.P. Vempatapu, J. Kumar, Application of high-performance liquid chromatography in determining saturates and aromatic hydrocarbons along with polars/additives in automotive finished and used lubricating oils, J. Chromatogr. 1705 (2024) 464275.

[9] K. Primerano, J. Mirwald, B. Hofko, Asphaltenes and maltenes in crude oil and bitumen: a comprehensive review of properties, separation methods, and insights into structure, reactivity and Aging, Fuel 353 (2024) 129438. https://doi.org/10.1016/j.fuel.2024.129438.

[10] G. Vanini, T.A. Barra, L.M. Souza, N.C.L. Madeira, Characterization of nonvolatile polar compounds from Brazilian oils by electrospray ionization with FT-ICR MS and Orbitrap-MS, Fuel 263 (2020) 116644. https://doi.org/10.1016/j.fuel.2019.116644.

[11] F. Zheng, Q. Shi, G.S. Vallverdu, P. Giusti, et al., Fractionation and characterization of petroleum asphaltene: focus on metalopetroleomics, Processes 8 (3) (2020) 307.

[12] A. Ghamartale, S. Afzali, N. Rezaei, S. Zendehboudi, Asphaltene Deposition Control by Chemical Inhibitors: Theoretical and Practical Prospects, 2021.

[13] M.R. Elkatory, E.A. Soliman, A. El Nemr, M.A. Hassaan, Mitigation and remediation technologies of waxy crude oils’ deposition within transportation pipelines: a review, Polymers 14 (3) (2022) 498. https://doi.org/10.3390/polym14030498.

[14] A. Hussein, Essentials of Flow Assurance Solids in Oil and Gas Operations: Understanding Fundamentals, Characterization, Prediction, Environmental Safety, and Management, 2022.

[15] A.A. Moud, Asphaltene induced changes in rheological properties: a review, Fuel 314 (2022) 122678. https://doi.org/10.1016/j.fuel.2021.122678.

[16] O.S. Zueva, E.R. Zvereva, A.O. Makarova, Influence of high-molecular n-alkane associates on rheological behavior of the crude oil residue, Energy Fuels 36 (12) (2022) 6230-6239. https://doi.org/10.1021/acs.energyfuels.2c00852.

[17] M. Khan, Chemical and physical architecture of macromolecular chemistry and physics gels for fracturing fluid applications in the oil and gas industry; current status, challenges, and prospects, Gels 10 (1) (2024) 33. https://doi.org/10.3390/gels10010033.

[18] S.O. Ilyin, Structural rheology in the development and study of complex polymer materials, Polymers 144 (2024). https://doi.org/10.3390/polym16010112.

[19] R.M. Charin, M. Nele, Emulsions in offshore petroleum production: stability and flow assurance, Brazil, J. Petrol. Gas 17 (1) (2023) 0135-0153. https://doi.org/10.5419/bjpg2023-0011.

[20] J. Sangwai, A. Dandekar, Practical Aspects of Flow Assurance in the Petroleum Industry, 2022.

[21] M.R. Yakubov, G.R. Abilova, S.G. Yakubova, Heavy oil resin composition and their influence on asphaltene stability, in: The Chemistry of Oil and Petroleum Products, 2022.

[22] M. Derakhshani-Molayousefi, M. McCullagh, Deterring effect of resins on the aggregation of asphaltenes in n-heptane, Energy Fuels 34 (12) (2020) 15527-15538. https://doi.org/10.1021/acs.energyfuels.0c02858.

[23] H. Zheng, T. Li, X. Fu, C. Feng, C. Ma, S. Jiang, The influence of asphaltene and resin on the stability of crude oil emulsion and its demulsification mechanism, J. Mol. 413 (2024) 125924. https://doi.org/10.1016/j.molliq.2024.125924.

[24] A. Safaei, M. Asefi, M. Ahmadi, T. Pourshamsi, Chemical treatment for sand production control: a review of materials, methods, and field operations, Pet. Sci. 20 (2023) 446-471. https://doi.org/10.1016/j.petsci.2022.11.008.

[25] I. Beloglazov, V. Morenov, E. Leusheva, Flow modeling of high-viscosity fluids in pipeline infrastructure of oil and gas enterprises, Egypt. J. Pet. 30 (3) (2021) 43-49. https://doi.org/10.1016/j.ejpe.2021.05.003.

[26] A. R. Egorov, A. A. Kirichuk, V. V. Rubanik, and V. V. Rubanik Jr., "Chitosan and its P. Shallsuku, "modification and evaluation of the potential of Nigerian bentonite clays as catalysts support for upgrading heavy crude oil and bitumen," researchgate.net.

[27] J. Wiehe, K.S. Liang, Asphaltenes, resins, and the colloidal model, Oil Gas Sci. Technol. 51 (5) (1996) 607-619, https://doi.org/10.2516/ogst:1996057.

[28] D. Liao, T. Gu, J. Yan, Z. Yu, J. Dou, M. Hu, F. Zhao, J. Liu, Study on the effect of multi-factor compound action on long-term tensile performance of GFRP composite pipe and life prediction analysis, Composites 258 (2024) 111932. https://doi.org/10.1016/j.compositesb.2023.111932.

[29] B.P. Tissot, D.H. Welte, Petroleum Formation and Occurrence, Springer-Verlag, 1984.

[30] J.G. Speight, The Chemistry and Technology of Petroleum, CRC Press, 1991.

[31] S.I. Andersen, J.G. Speight, Petroleum resins: separation, character, and role in petroleum, Petrol. Sci. Technol. 19 (1-2) (2001) 1-34.

[32] J. Anne Koots,James G. Speight, Relation of petroleum resins to asphaltenes, Fuel 54 (3) (1975) 179-184, https://doi.org/10.1016/0016-2361(75)90007-1.ISSN0016-2361.

[33] O.C. Mullins, E.Y. Sheu, A. Hammami, A.G. Marshall, Asphaltenes, Heavy Oils, and Petroleomics, Springer, 2007.

[34] T.F. Yen, O.C. Mullins, Asphaltene Science and Technology, Springer, 2010.

[35] L. Goual, A. Firoozabadi, Measuring asphaltenes and resins, and dipole moment in petroleum fluids, AIChE J. 48 (11) (Nov. 2002) 2646-2663, https://doi.org/10.1002/aic.690481124.

[36] J.G. Speight, Handbook of Petroleum Refining, CRC Press, 2014.

[37] S. Anderson, G. Piñón, L. Patiño, Characterization and analysis of heavy oils: the role of resins, Energy Fuels 25 (7) (2011) 2999-3010.

[38] A.G. Marshall, R.P. Rodgers, Petroleomics: the next grand challenge for chemical analysis, Accounts Chem. Res. 37 (1) (2004) 53-59.

[39] T. Burgess, A. Bailey, C. Prewitt, J. Petrol. Enhanced oil recovery strategies using resins, Technol. 70 (6) (2018) 44-51.

[40] ASTM D2007-06, Standard Test Method for Analysis of Oils, Oils, and Solid Waxes by Thin-Layer Chromatography, ASTM International, 2006.

[41] M.R. Yakubov, G.R. Abilova, S.G. Yakubova, Composition and properties of heavy oil resins, Petrol. Chem. 60 (7) (2020) 763-770. Springer, https://doi.org/10.1134/S0965544120070133.

[42] Y. Zhu, F. Tian, Y. Liu, L. Cui, et al., Comparison of the composition and structure for coal-derived and petroleum heavy subfraction by an improved separation method, Fuel 291 (2021) 120174. https://doi.org/10.1016/j.fuel.2021.120174.

[43] W. Pu, M. He, X. Yang, R. Liu, et al., Experimental study on the key influencing factors of phase inversion and stability of heavy oil emulsion: asphaltene, resin and petroleum acid, Fuel 309 (2022) 122077. https://doi.org/10.1016/j.fuel.2021.122077.

[44] V.K. Hoang, K.J. Bae, Y. Oh, W. Kwon, J. Oh, K. Ku, M. Kim, Consideration of molecular weight-dependent high thermal resistance of end-capped-oligoimide based thermoset resins, Polym. Test. 134 (2024) 108746. https://doi.org/10.1016/j.polymertesting.2023.108746.

[45] B. Li, S. Alexandris, C. Pantazidis, E. Moghimi, Mechanical Properties of Epoxy Networks with Metal Coordination Bonds: Insights from Temperature and Molar Mass Variation, ACS Publications, 2024.

[46] X. Zhu, X. Yang, C. Ma, W. Li, Extraction of vanadium (IV) ions by metal-modified resin through multiple effects:ionic substitution and proton exchange, J. Water Proc. Eng. 55 (2023) 103937. https://doi.org/10.1016/j.jwpe.2023.103937.

[47] V.R. Gurjar, P.S. Koujalagi, Removal of vanadium by nano-titania fabricated resin from aqueous solutions, Rasayan J. Chem. 16 (3) (2023) 1549-1555. https://doi.org/10.31788/RJC.2023.1637027.

[48] A. Tajikmansori, A.H.S. Dehaghani, New insights into effect of the electrostatic properties on the interfacial behavior of asphaltene and resin: an experimental study of molecular structure, J. Mol. 375 (2023) 121082. https://doi.org/10.1016/j.molliq.2023.121082.

[49] E.Y. Kovalenko, T.A. Sagachenko, Structural organization of asphaltenes and resins and composition of low polar components of heavy oils, Energy Fuels 37 (4) (2023) 2046-2056. https://doi.org/10.1021/acs.energyfuels.2c03993.

[50] X. Weng, L. Cao, G. Zhang, F. Chen, L. Zhao, Y. Zhang, et al., Ultradeep hydrodesulfurization of diesel: mechanisms, catalyst design strategies, and challenges, Ind. Eng. Chem. Res. 59 (2020) 21261-21274, https://doi.org/10.1021/acs.iecr.0c03910.

[51] R. Djimasbe, M.A. Varfolomeev, A.A. Al-Muntaser, C. Yuan, D.A. Feoktistov, M.A. Suwaid, et al., Oil dispersed nickel-based catalyst for catalytic upgrading of heavy oil using supercritical water, Fuel 313 (2022) 122702, https://doi.org/10.1016/j.fuel.2021.122702.

[52] L. Ma, M. Slaný, R. Guo, W. Du, Y. Li, G. Chen, Study on synergistic catalysis of ex-situ catalyst and in-situ clay in aquathermolysis of water-heavy oil-ethanol at low temperature, Chem. Eng. J. 453 (2023) 139872, https://doi.org/10.1016/j.cej.2022.139872.

[53] A. Imanbayev, D.S. Al-Maamari, A. Elkamel, M.S. Rahman, The impact of resins on the thermal cracking behavior of asphaltenes in heavy crude oil, Fuel 200 (2017) 472-482, https://doi.org/10.1016/j.fuel.2017.03.034.

[54] Y. Imanbayev, Y. Tileuberdi, Y. Ongarbayev, Z. Mansurov, et al., Changing the Structure of Resin-Asphaltenes Molecules in Cracking, 2017.

[55] M. Iwase, S. Sugiyama, Y. Liang, Y. Masuda, et al., Development of Digital Oil for Heavy Crude Oil: Molecular Model and Molecular Dynamics Simulations, 2018.

[56] G. Singh, M. Esmaeilpour, A. Ratner, Effect of Polymeric Additives on Ignition, Combustion and Flame Characteristics and Soot Deposits of Crude Oil Droplets, 2019.

[57] J. Liu, F. Tian, J. Liu, Q. Guo, et al., Structure Characterization and Solubility Analysis of the Existent Gum of the Fischer-Tropsch Synthetic Crude, 2020.

[58] A. Abou-Dib, F. Aubriet, J. Hertzog, L. Vernex-Loset, et al., Next Challenges for the Comprehensive Molecular Characterization of Complex Organic Mixtures in the Field of Sustainable Energy, 2022.

[59] S.F. Alkafeef, S.S. Al-Marri, Asphaltene Remediation and Improved Oil Recovery by Advanced Solvent Deasphalting Technology, 2023.

[60] S. Yang, C. Yan, J. Cai, Y. Pan, et al., Research Progress in Nanoparticle Inhibitors for Crude Oil Asphaltene Deposition, 2024.

[61] J. Liu, S. Wang, Y. Peng, J. Zhu, W. Zhao, X. Liu, Advances in sustainable thermosetting resins: from renewable feedstock to high performance and recyclability, Prog. Polym. Sci. 115 (2021) 101375.

[62] A. Shundo, S. Yamamoto, K. Tanaka, Network formation and physical properties of epoxy resins for future practical applications, JACS Au 2 (5) (2022) 1123-1133.

[63] G. González, S. Acevedo, J. Castillo, O. Villegas, Presence in THF solution of asphaltenes and subfractions A1 and A2, by gel permeation chromatography with inductively coupled plasma mass spectrometry, Energy Fuels 34 (5) (2020) 5916-5923.

[64] M.A. Aristri, M.A.R. Lubis, A.H. Iswanto, W. Fatriasari, Bio-based polyurethane resins derived from tannin: source, synthesis, characterisation, and application, Forests 12 (3) (2021). Article 372.

[65] Jonas Sundberg, Karen L. Feilberg, Characterization of heteroatom distributions in the polar fraction of North Sea oils using high-resolution mass spectrometry, J. Petrol. Sci. Eng. 184 (2020) 106563. ISSN 0920-4105.

[66] M. Vale, M.R.M. Silva, I.C. Damin, P.J. Sanches Filho, B. Welz, Speciation analysis of nickel and vanadium in resin fractions, Talanta 74 (5) (2008) 1385-1391.

[67] C. Liu, Y. Wang, Y. Chen, Y. Zhu, Hydrogen transfer route during hydrothermal treatment of lignite using the isotope tracer method and improving the pyrolysis tar yield, Energy Fuels 30 (6) (2016) 4562-4569, https://doi.org/10.1021/acs.energyfuels.6b00693.

[68] S. Song, H. Zhang, L. Sun, J. Shi, X.-L. Cao, S. Yuan, Molecular dynamics study on aggregating behavior of resin molecules, Energy Fuels 32 (7) (2018) 7594-7603.

[69] L. Natkaniec-Nowak, P. Drzewicz, P. Stach, The overview of analytical methods for studying fossil natural resins, Crit. Rev. Anal. Chem. 54 (1) (2024) 1-15.

[70] F. Zheng, Z. Ren, B. Xu, K. Wan, J. Cai, J. Yang, Elucidating multiple-scale reaction behaviors of phenolic resin pyrolysis via TG-FTIR and ReaxFF molecular dynamics simulations, J. Anal. Appl. Pyrolysis 155 (2021) 105048.

[71] J.M. Santos, A. Vetere, A. Wisniewski, M.N. Eberlin, Modified SARA method to unravel the complexity of resin fraction (s) in crude oil, Energy Fuels 34 (2) (2020) 1447-1455. https://doi.org/10.1021/acs.energyfuels.9b04061.

[72] D. Cai, C. Li, J. Lin, W. Sun, M. Zhang, T. Wang, Comparative study of atmospheric brown carbon at Shanghai and the East China Sea: molecular characterization and optical properties, Sci. Total Environ. 913 (2024) 168085. https://doi.org/10.1016/j.scitotenv.2023.168085.

[73] S.P.O. Danielsen, H.K. Beech, S. Wang, Molecular characterization of polymer networks, Chemical 121 (9) (2021) 4540-4615, nsf.gov, https://doi.org/10.1021/acs.chemrev.0c00975.

[74] D. Liu, C. Li, F. Yang, G. Sun, J. You, K. Cui, Synergetic effect of resins and asphaltenes on emulsion stability, Fuel (2019), https://doi.org/10.1016/J.FUEL.2019.04.159.

[75] M. Abdel-Raouf, Factors Affecting the Stability of Crude Oil Emulsions, InTechOpen, 2012.

[76] C.A. Alves, J.F. Romero Yanes, F.X. Feitosa, H.B. de Sant'Ana, Influence of resin/asphaltene ratio on emulsion stability, J. Pet. Sci. Eng. 202 (2021) 109268, https://doi.org/10.1016/J.PETROL.2021.109268.

[77] K. Venkateswaran, T. Hoaki, M. Katō, T. Maruyama, Microbial degradation of resins in crude oil, Can. J. Microbiol. 41 (4-5) (1995) 418-424, https://doi.org/10.1139/M95-055.

[78] T.F. Yen, G.V. Chilingar, C.H. Gray, Asphaltenes and Asphalts, vol. 2, Elsevier, 2010.

[79] A. Hirschberg, L.N.J. de Jong, B.A. Schipper, J.G. Meijer, Influence of temperature and pressure on asphaltene flocculation, Soc. Petrol. Eng. J. 24 (3) (1984) 283-293, https://doi.org/10.2118/11202-PA.

[80] M. Lashkarbolooki, S. Ayatollahi, Effects of asphaltene and resin on interfacial tension, Fuel 211 (2018) 535-544.

[81] A. Boukir, E. Aries, M. Guiliano, L. Asia, P. Doumenq, G. Mille, Sub-fractionation and photooxidation of crude oil resins, Chemosphere 43 (3) (2001) 279-286, https://doi.org/10.1016/S0045-6535(00)00159-4.

[82] J. Gutierrez, G. Orozco, T. Babadagli, et al., Study of interactions between crude oil resins and asphaltenes, J. Petrol. Technol. 53 (5) (2001) 62-70.

[83] A. Hammami, J. Ratulowski, Asphaltenes: problematic but rich in potential, Oilfield Rev. 19 (2) (2007) 22-43.

[84] H. Alboudwarej, J. Felix, S. Taylor, et al., Highlighting heavy oil, Oilfield Rev. 18 (2) (2006) 34-53.

[85] M. Rahmani, B. Dabir, et al., Effect of asphaltene and resin content on crude oil stability, Petrol. Sci. Technol. 21 (1-2) (2003) 173-189.

[86] S. Acevedo, G. Escobar, L. Gutierrez, P. Ortega, Asphaltene aggregation and precipitation in crude oils: the role of the resin-asphaltene ratio, Energy Fuels 26 (6) (2012) 2727-2735.

[87] K.J. Leontaritis, G.A. Mansoori, Asphaltene flocculation during oil production and processing: a thermodynamic colloidal model, SPE Prod. Facil. 3 (4) (1988) 45-51.

[88] K.E. Peters, C.C. Walters, J.M. Moldowan, The Biomarker Guide: Biomarkers and Isotopes in Petroleum Systems and Earth History, vol. 2, Cambridge University Press, 2005.

[89] N. Hosseinpour, M.M. Shadman, et al., Effect of sulfur content on asphaltene precipitation and rheology of heavy crude oils, Energy Fuels 25 (5) (2011) 2036-2043.

[90] J.P. Pfeiffer, R.N. Saal, Asphaltic bitumen as colloidal systems, J. Phys. Chem. 44 (2) (1940) 139-149.

[91] J. Escobedo, G.A. Mansoori, Viscometric principles of onset of asphaltene flocculation in petroleum mixtures, J. Pet. Sci. Eng. 17 (3-4) (1997) 313-323.

[92] G. González, M. Sousa, E. Lucas, Asphaltenes precipitation from crude oil and hydrocarbon media, Energy Fuels 20 (2006) 2544-2551.

[93] J. Pereira, I. Lopez, R. Salas, F.T.M. Silva, C. Fernández, C. Urbina, J.C. Cortés López, Resins: the molecules responsible for the stability/instability phenomena of asphaltenes, Energy Fuels 21 (2007) 1317-1321.

[94] S. Alkafeef, S.S. Al-Marri, Asphaltene remediation and improved oil recovery by advanced solvent deasphalting technology, ACS Omega 8 (2023) 26619-26627.

[95] L.H. Ali, K. Al-Ghannam, Investigations into asphaltenes in heavy crude oils. I. Effect of temperature on precipitation by alkane solvents, Fuel 60 (1981) 1043-1046.

[96] E. Tongton, Study on stability of asphaltenes in Thai crude oil, J. Pet. Sci. Eng. 133 (2015) 393-398. https://doi.org/10.1016/j.petrol.2015.06.009.

[97] P. Schorling, D. Kessel, I. Rahimian, Influence of the crude oil resin/asphaltene ratio on the stability of oil/water emulsions, Colloids Surf. A Physicochem. Eng. Asp. 152 (1999) 95-102.

[98] S. Hadizadeh, M.R. Malayeri, Cohesive interactions during asphaltene deposition for different crude oils, J. Mol. Liq. 396 (2024) 123581.

[99] Fanghui Liu, et al., Effects of molecular polarity on the adsorption and desorption behavior of asphaltene model compounds on silica surfaces, Fuel 284 (2021) 118990.

[100] Marcos Henrique O. Petroni, et al., Role of asphaltenes and resins at the interface of petroleum emulsions (W/O): a literature review, Geoenergy Sci. Eng. (2024) 212932.

[101] W. Pu, M. He, X. Yang, R. Liu, C. Shen, Experimental study on the key influencing factors of phase inversion and stability of heavy oil emulsion: asphaltene, resin and petroleum acid, Fuel 308 (2022) 121959. https://doi.org/10.1016/j.fuel.2021.121959.

[102] Fanyong Song, et al., The influence of asphaltene and resin on the stability of crude oil emulsion and its demulsification mechanism, J. Mol. Liq. 413 (2024) 125924.

[103] Ivan Moncayo-Riascos, et al., Effect of resin/asphaltene ratio on the rheological behavior of asphaltene solutions in a de-asphalted oil and p-xylene: a theoretical-experimental approach, J. Mol. Liq. 315 (2020) 113754.

[104] R.Y. Xiong, J.X. Guo, W. Kiyingi, H.X. Xu, X.P. Wu, The deposition of asphaltenes under high-temperature and high-pressure (HTHP) conditions, Pet. Sci. 20 (2) (2023) 481-492. https://doi.org/10.1016/j.petsci.2022.11.009.

[105] R. Lu, L. Lai, H. Zhang, Stabilization mechanism of emulsion gels of crude oil with low asphaltene, resin, and wax contents, J. Mol. Liq. 392 (2024) 125896. https://doi.org/10.1016/j.molliq.2024.125896.

[106] C. Yu, Q. Yang, Investigation of the interfacial interaction of carbon nanomaterials with asphalt matrix: insights from molecular simulations, Mol. Simul. 49 (14) (2023) 1021-1029. https://doi.org/10.1080/08927022.2023.2193721.

[107] F. Souas, A. Safri, A. Benmounah, A review on the rheology of heavy crude oil for pipeline transportation, Petrol. Res. 6 (2) (2021) 168-177. https://doi.org/10.1016/j.ptlrs.2021.05.003.

[108] Ekaterina E. Barskaya, et al., Rheological behavior of crude oil and its dependence on the composition and chemical structure of oil components, Petrol. Sci. Technol. 41 (2) (2022) 159-175.

[109] J. Yang, Y. Bai, J. Sun, K. Lv, Y. Lang, Recent advances of thermosetting resin and its application prospect in oil and gas drilling and production engineering, Geoenergy Sci. Eng. 225 (2023) 211765.

[110] W. Guo, S. Bai, Y. Ye, High-value-added reutilization of resin pyrolytic oil: pyrolysis process, oil detailed composition, and properties of pyrolytic oil-based composites, Eur. Polym. J. 162 (2022) 110920. https://doi.org/10.1016/j.eurpolymj.2021.110920.

[111] Svetlana O. Ilyina, et al., Epoxy phase-change materials based on paraffin wax stabilized by asphaltenes, Polymers 15 (15) (2023) 3243.

[112] S. Mahdavi, M. Jalilian, S. Dolati, Review and perspectives on CO2 induced asphaltene instability: fundamentals and implications for phase behaviour, flow assurance, and formation damage in oil reservoirs, Fuel 353 (2024) 129382.

[113] X. Wang, H. Gurbanov, M. Adygezalova, E. Alizade, Investigation of removing asphaltene-resin-paraffin deposits by chemical method for Azerbaijan high-paraffin oil production process, Energies 17 (1) (2024) 114.

[114] S. Mahdavi, A. Mousavi Moghadam, Critical review of underlying mechanisms of interactions of asphaltenes with oil and aqueous phases in the presence of ions, Energy Fuels (2021).

[115] R.W.P. Ortiz, T.S.L. Maravilha, A. Belati, Carboxylic acids in the synthesis of chemicals for addressing flow assurance challenges in offshore petroleum production, Curr. Organ. 28 (5) (2024) 455-472.

[116] H. Yonebayashi, Asphaltene Flow Assurance Risks: How Are Pitfalls Brought into the Open? Journal of the Japan Petroleum Institute, 2021.

[117] A. Tirado, G. Félix, F. Trejo, Properties of heavy and extra-heavy crude oils, in: Extra-Heavy Crude, Wiley Library, 2023.

[118] M. Lam-Maldonado, Y.G. Aranda-Jiménez,Extra heavy crude oil viscosity and surface tension behavior using a flow enhancer and water at different temperatures conditions, Heliyon 9 (6) (2023) e 17361 e12120, https://doi.org/10.1016/j.heliyon.2023.e17361.

[119] R.S. Hamied, A.N.M. Ali, K.A. Sukkar, Enhancing heavy crude oil flow in pipelines through heating-induced viscosity reduction in the petroleum industry, Fluid Dynam. Mater. Process. 19 (4) (2023) 771-788.

[120] Z.A. hussein, Z.T. Al-Sharify, Flow of Crude Oil in Pipes and its Environmental Impact. A Review, AIP Conference, 2023.

[121] L. Pu, P. Xu, M. Xu, J. Song, M. He, Lost circulation materials for deep and ultra-deep wells: a review, J. Petrol. Sci. Eng. 210 (2022) 110044.

[122] S. Davoodi, M. Al-Shargabi, D.A. Wood, Synthetic polymers: a review of applications in drilling fluids, Pet. Sci. 21 (2) (2024) 392-413.

[123] K. Chaudhary, B. Kandasubramanian, Self-healing nanofibers for engineering applications, Ind. Eng. 61 (3) (2022) 956-972. https://doi.org/10.1021/acs.iecr.1c04293.

[124] M.M.B.M. Farok, B. Davidescu, R.E. Hincapie, Understanding asphaltene precipitation dynamics in flow assurance risk management of an offshore field in Abu Dhabi, in: Petroleum Exhibition, 2024.

[125] W. Liu, Q. Lin, S. Chen, H. Yang, K. Liu, B. Pang, Microencapsulated phase change material through cellulose nanofibrils stabilized Pickering emulsion templating, Comp. Hybrid 6 (2023) 1769-1783. https://doi.org/10.1007/s42114-023-00756-0.

[126] Y. Zhou, S. Qiu, W. Guo, F. Chu, X. Zhou, W. Chen, Ti3C2TX@PHbP-PHC architecture with enhanced free-radical quenching capability: effective reinforcement and fire safety performance in bismaleimide resin, Chem. Eng. 442 (2022) 136369. https://doi.org/10.1016/j.cej.2022.136369.

[127] A. Abdelazim, M. Abu El Ela, A. El-Banbi, Successful approach to mitigate the asphaltenes precipitation problems in ESP oil wells, J. Petrol. 213 (2022) 110441. https://doi.org/10.1016/j.petrol.2022.110441.

[128] M.A. Ahmed, G.H. Abdul-Majeed,An integrated review on asphaltene: definition, chemical composition, properties, and methods for determining onset precipitation, Prod. Operat. (2023). SPE-216970-MS, https://doi.org/10.2118/216970-MS.

[129] F. Song, H. Zheng, T. Li, X. Fu, C. Feng, C. Ma, The influence of asphaltene and resin on the stability of crude oil emulsion and its demulsification mechanism, J. Mol. 14 (5) (2024), 392, 125924. https://doi.org/10.1016/j.molliq.2024.125924 945, https://doi.org/10.3390/polym14050945.

[130] R. Lu, L. Lai, H. Zhang, Stabilization mechanism of emulsion gels of crude oil with low asphaltene, resin, and wax contents, J. Mol. Liq. 392 (2024) 125896. https://doi.org/10.1016/j.molliq.2024.125896.

[131] M. Rayhani, M. Simjoo, M. Chahardowli, Effect of water chemistry on the stability of water-in-crude oil emulsion: role of aqueous ions and underlying mechanisms, J. Petrol. Sci. Eng. 209 (2022) 109871.

[132] M.H.O. Petroni, R.R.B. Corona, C.M.S. Sad, R. Ramos, Role of asphaltenes and resins at the interface of petroleum emulsions (W/O): a literature review, Geoenergy Sci. Eng. 225 (2024) 212932. https://doi.org/10.1016/j.geoen.2024.212932.

[133] M. He, W. Pu, T. Shi, X. Yang, M. Zheng, X. Tang, Unique emulsifying and interfacial properties of SP oil: enhanced emulsification at higher temperatures, J. Mol. 392 (2024) 125931.

[134] A.M. Sousa, M.J. Pereira, H.A. Matos, Oil-in-water and water-in-oil emulsions formation and demulsification, J. Petrol. Sci. Eng. 209 (2022) 110111. https://doi.org/10.1016/j.petrol.2021.110111.

[135] C. Françolle de Almeida, M. Saget, Innovative fouling-resistant materials for industrial heat exchangers: a review, Rev. Chem. 39 (5) (2023) 695-723. https://doi.org/10.1515/revce-2022-0079.

[136] S. Kato, Y. Kansha, Comprehensive review of industrial wastewater treatment techniques, Environ. Sci. Pollut. Control Ser. 31 (2024) 35544-35564. https://doi.org/10.1007/s11356-023-30180-4.

[137] L.D. Abo, S.M. Hailegiorgis, G.T. Gindaba, A comprehensive review on fouling of heat transfer units in sugar factory ethanol plant: mechanisms and mitigation methods, Environmental 241 (2024) 117895. https://doi.org/10.1016/j.envres.2023.117895.

[138] F. Hashemi, H. Hashemi, A. Abbasi, Life cycle and economic assessments of petroleum refinery wastewater recycling using membrane, resin and on site disinfection (UF-IXMB-MOX) processes, Process Saf. Environ. Prot. 160 (2022) 582-595. https://doi.org/10.1016/j.psep.2022.02.034.

[139] M. Nassabeh, S. Iglauer, A. Keshavarz, Z. You, Advancements, challenges, and perspectives of flue gas injection in subsurface formations: a comprehensive review, Energy Fuels 37 (6) (2023) 3533-3559. https://doi.org/10.1021/acs.energyfuels.2c03952.

[140] C.A. Niranjan, T. Raghavendra, M.P. Rao, Magnesium alloys as extremely promising alternatives for temporary orthopedic implants-A review. J. Magnesium 11, Elsevier, 2023, pp. 1283-1300. https://doi.org/10.1016/j.jma.2022.12.004.

[141] G.G. Yu, C. Teran, N. Patel, A. Fields, R. Gutierrez, Impact of centrifuge-separated fractions from light tight oils on the propensity and mechanisms of fouling, and improved crude oil fouling potential prediction model, Energy Fuels 34 (10) (2020) 12687-12697. https://doi.org/10.1021/acs.energyfuels.0c02141.

[142] A. Bhattacharyya, L. Liu, K. Lee, J. Miao, Review of biological processes in a membrane bioreactor (MBR): effects of wastewater characteristics and operational parameters on biodegradation efficiency when treating industrial oily waste water, J. Mar. Sci. Eng. 10 (6) (2022) 776. https://doi.org/10.3390/jmse10060776.

[143] A.H. Al-Moubaraki, I.B. Obot, Corrosion challenges in petroleum refinery operations: sources, mechanisms, mitigation, and future outlook, J. Saudi Chem. Soc. 25 (12) (2021) 101365. https://doi.org/10.1016/j.jscs.2021.101365.

[144] G. Heroux, M. Puettmann, Cradle-to-grave Life Cycle Assessment of North American Medium Density Fiberboard 73 (1-2) (2023) 61-74, https://doi.org/10.13073/FPJ-D-22-00056.

[145] M. Chen, Y. Wang, W. Chen, M. Ding, Z. Zhang, Synthesis and evaluation of multi-aromatic ring copolymer as viscosity reducer for enhancing heavy oil recovery, Chem. Eng. 460 (2023) 141746.

[146] T. Roldán-Carrillo, G. Castorena-Cortes, Hybrid low salinity water and surfactant process for enhancing heavy oil recovery. Petrol. Explor. 50, Elsevier, 2023, pp. 191-199. https://doi.org/10.1016/S1876-3804(23)60106-0.

[147] M. Contreras-Mateus, A. Hethnawi, Applications of nanoparticles in energy and the environment: enhanced oil upgrading and recovery and cleaning up energy effluents, Clim. Action Clean. up Energy Effluent. (2022) 275-300 (Book chapter — pages included).

[148] W. Li, H. Li, H. Da, K. Hu, et al., Influence of pour point depressants (PPDs) on wax deposition: a study on wax deposit characteristics and pipeline pigging, Fuel Process. Technol. 213 (2021) 106697, in: https://doi.org/10.1016/j.fuproc.2020.106697.

[149] N. Li, W. Wu, G. Mao, Effect of modified ethylene vinyl acetate copolymers pour point depressants on flow properties of crude oil and corresponding mechanism analysis, Colloids Surf. A Physicochem. Eng. Asp. 624 (2021) 126806. https://doi.org/10.1016/j.colsurfa.2021.126806.

[150] I. Mohammed, M. Mahmoud, D. Al Shehri, Asphaltene precipitation and deposition: a critical review, J. Petrol. 204 (2021) 108680. https://doi.org/10.1016/j.petrol.2021.108680.

[151] M. J. Jafar, A. A. Husaen, A. M. Ajeel, and S. H. Faleh, Characteristics of Ahdeb oilfield Heavy Oil and Methods of Transporting it to Zubair oilfield Southern Iraq Supervised by Dr. Hanon Hasan Mashkor.

[152] L.D. Douglas, N. Rivera-Gonzalez, N. Cool, A Materials Science Perspective of Midstream Challenges in the Utilization of Heavy Crude Oil 7 (42) (2023) 36969-36983, https://doi.org/10.1021/acsomega.2c04337.

[153] H. Goyal, P. Jones, A. Bajwa, D. Parsons, Design trends and challenges in hydrogen direct injection (H2DI) internal combustion engines-A review, Int. J. Hydrogen Energy (2024).

[154] I.K. Shishkova, D.S. Stratiev, M.P. Tavlieva, R.K. Dinkov, Evaluation of the different compatibility indices to model and predict oil colloidal stability and its relation to crude oil desalting, Resources 10 (9) (2021) 86.

[155] Y.H. Chan, S.K. Loh, B.L.F. Chin, C.L. Yiin, B.S. How, Fractionation and extraction of bio-oil for production of greener fuel and value-added chemicals: recent advances and future prospects, Chem. Eng. 397 (2020) 125406.

[156] Z. Xu, Z. Xiong, M. Gong, Q. Zeng, J. Hong, Molecular dynamics-based study of the modification mechanism of asphalt by graphene oxide, J. Mol. 370 (2023) 120993. https://doi.org/10.1016/j.molliq.2022.120993.

[157] Y. Zhao, L. Zhao, H. Chen, N. Zhao, G. Chang, Synergistic collaborations between surfactant and polymer for in-situ emulsification and mobility control to enhance heavy oil recovery, J. Mol. 392 (2024) 126019.

[158] A.M. Salem, S. Khalil, G. Abdel-Aleim, A review of recent developments in enhanced oil recovery: the integration of steam injection with chemical additives and their effect on heavy oil recovery, J. Petrol. 222 (2023) 111082. https://doi.org/10.1016/j.petrol.2022.111082.

[159] C.C. Kwasi-Effah, Heat Transfer Fluids in Solar Thermal Power Plants: A Review, NIPES-Journal of Science and Technology, 2024. 6(1), 132-139. https://doi.org/10.47531/njstr.6.1.2024.10

[160] L.A. Omeiza, M. Abid, A. Dhanasekaran, J. Eng. (Application of solar thermal collectors for energy consumption in public buildings-An updated technical review, 2023). Elsevier.

[161] C.A. Guerrero-Martin, D. Montes-Pinzon, Asphaltene precipitation/deposition estimation and inhibition through nanotechnology: a comprehensive review, Energies 16 (21) (2023) 7700. https://doi.org/10.3390/en16217700.

[162] S. Mahdavi, A. Mousavi Moghadam, Critical review of underlying mechanisms of interactions of asphaltenes with oil and aqueous phases in the presence of ions, Energy Fuels 35 (14) (2021) 11561-11576. https://doi.org/10.1021/acs.energyfuels.1c00819.

[163] D. Mojica, M. Angeles, O. Alvarez, D. Pradilla, Asphaltene precipitation and the influence of dispersants and inhibitors on morphology probed by AFM, Colloid. Interf. 7 (3) (2023) 41. https://doi.org/10.3390/colloids7030041.

[164] S. Yang, H. Wang, X. Lou, Y. Pan, et al., Asphaltene deposition inhibitors in CO 2 flooding: a review and future application prospects, Energy Fuels 38 (4) (2024) 1957-1980. https://doi.org/10.1021/acs.energyfuels.3c03731.

[165] P. Zhang, Y. Wei, R. Li, Y. Wan, X. Zhang, Self-healable, highly stretchable modified epoxy resin materials by incorporation with quadruple hydrogen-bonded supramolecular polymers, Macromol. Chem. Phys. 222 (5) (2021) 2000476. https://doi.org/10.1002/macp.202000476.

[166] N.C. Phillip, Effect of Pipeline Pigging on Raw Water Pipeline Flow Rate and Energy Consumption, 2024.15(2), 04023051. https://doi.org/10.1061/(ASCE)PS.1949-1204.0000639 (167)Li,W.,Zhang,H.,Li,H.,&Wang,W.(2022).APromisi

[167] W. Li, H. Zhang, H. Li, W. Wang, A promising flow assurance application of superparamagnetic nanoparticle heating for wax removal in offshore pipeline and production tubing: mechanism and simulation, SPE J. (2022).

[168] J.S. Arwinder Singh, M.I. Nor, A. Suresh, A study on extraction pipe insulation for solidification prevention of heavy crude oil after extraction, Innovation 6 (2) (2023) 72-81. https://doi.org/10.33140/jime.06.02.07.

[169] Y. Xu, K. Zhang, Y. Zhu, S. Chen, S. Zhao, X. Liu, Research on heat transfer characteristics of long-distance pipeline under shutdown and maintenance conditions, Thermal 43 (2024) 101580. https://doi.org/10.1016/j.tsep.2024.101580.

[170] Y. Ren, G. Liu, G. Pu, Y. Chen, W.Q. Chen, L. Shi, Spatiotemporal evolution of the international plastic resin trade network, J. Clean. Prod. 258 (2020) 120726. https://doi.org/10.1016/j.jclepro.2020.120726.

[171] K. Zhao, X. Wang, Z. Zhang, Y. Li, S. Li, Life-Cycle environmental impacts of additive-related chemicals in polyvinyl chloride plastics and the mitigation potential, Environ. Sci. Technol. 58 (5) (2024) 2241-2251. https://doi.org/10.1021/acs.est.3c07126.

[172] M. Fernandes, J.M. Corchado, G. Marreiros, Machine learning techniques applied to mechanical fault diagnosis and fault prognosis in the context of real industrial manufacturing use-cases: a systematic literature review, Appl. Intell. 52 (2022) 21500-21531. https://doi.org/10.1007/s10489-022-04183-4.

[173] Y. Jiang, S. Yin, O. Kaynak, Performance supervised plant-wide process monitoring in industry 4.0: a roadmap, IEEE Open J. Ind. 1 (2020) 200-210. https://doi.org/10.1109/OJIES.2020.2992233.

[174] S. Ghafoori, M. Omar, N. Koutahzadeh, New advancements, challenges, and future needs on treatment of oilfield produced water: a state-of-the-art review, Purif. Technol. 290 (2022) 120877. https://doi.org/10.1016/j.seppur.2022.120877.

[175] M. Ownby, D.A. Desrosiers, C. Vaneeckhaute, Phosphorus removal and recovery from wastewater via hybrid ion exchange nanotechnology: a study on sustainable regeneration chemistries, NPJ Clean Water 4 (2021). Article 35, https://doi.org/10.1038/s41545-021-00110-8.

[176] M.R. Azani, A. Hassanpour, Nanotechnology in the fabrication of advanced paints and coatings: dispersion and stabilization mechanisms for enhanced performance, ChemistrySelect 9 (8) (2024) e202302432. https://doi.org/10.1002/slct.202302432.

[177] T. Stonorov, Tension: Tensile Structures and Inflatables, 2023, pp. 103-115.

[178] M. Embabi, Molecular Structure-Processing-Property Relationship in Polypropylene Foams Fabricated Using Supercritical CO2, 2024.

[179] Z. Wang, G. Liang, S. Jiang, F. Wang, H. Li, B. Li, Understanding the environmental impact and risks of organic additives in plastics: a call for sustained research and sustainable solutions, Emerging (2024).

[180] V.M. Ramdas, P. Mandree, M. Mgangira, Review of current and future bio-based stabilisation products (enzymatic and polymeric) for road construction materials, Transportation 30 (2021) 100616. https://doi.org/10.1016/j.trgeo.2021.100616.

[181] F. Souas, A. Safri, A. Benmounah, A review on the rheology of heavy crude oil for pipeline transportation, Petrol. Res. 6 (2) (2021) 168-177. https://doi.org/10.1016/j.ptlrs.2021.05.003.

[182] C.D. Bandara, M. Schmidt, Y. Davoudpour, Microbial Identification, High-Resolution Microscopy and Spectrometry of the Rhizosphere in its Native Spatial Context, Frontiers in Plant 2021 (12) (2021) 738501. https://doi.org/10.3389/fpls.2021.738501.

[183] B. Fan, J. Yang, L. Cao, X. Wang, J. Li, Y. Yang, Q. Wang, Revealing the impact of micro-SiO2 filer content on the anti-corrosion performance of water-borne epoxy resin, Polymers (2023).

[184] S.S. Abdullahi, R.E.A. Mohammad, A.H. Jagaba, Natural, synthetic, and composite materials for industrial effluents treatment: a mini review on current practices, cost-effectiveness, and sustainability, Case studies in chemical and, Environmental Engineering 10 (2024) 100350. https://doi.org/10.1016/j.cscee.2023.100350.

[185] V.V. Tran, V.D. Phung, D. Lee, Recent advances and innovations in the design and fabrication of wearable flexible biosensors and human health monitoring systems based on conjugated polymers, Bio-Design Manuf (2024) 100570. https://doi.org/10.1016/j.cscee.2024.100570.

[186] Caineng Zou, Songtao Wu, Y. Zhi, Songqi Pan, Progress, challenge and significance of building a carbon industry system in the context of carbon neutrality strategy, Petrol. Explor. Dev. 50 (3) (2023) 567-578. https://doi.org/10.1016/S1876-3804(23)60254-5.

[187] M. Cioffi, A.S.C. Bomfim m, V. Ambrogi, A review on self-healing polymers and polymer composites for structural applications, Polymer 258 (2022) 125236. https://doi.org/10.1016/j.polymer.2022.125236.

[188] M. Omidvar, L. Cheng, A. Farhadian, A. Berisha, Development of highly efficient dual-purpose gas hydrate and corrosion inhibitors for flow assurance application: an experimental and computational study, Energy Fuels 36 (22) (2022) 11838-11852. https://doi.org/10.1021/acs.energyfuels.2c01333.

[189] R. Anto, S. Deshmukh, S. Sanyal, U.K. Bhui, Nanoparticles as flow improver of petroleum crudes: study on temperature-dependent steady-state and dynamic rheological behavior of crude oils, Fuel 280 (2020) 118548. https://doi.org/10.1016/j.fuel.2020.118548.

[190] Y. Liu, Z. Qiu, C. Zhao, Z. Nie, H. Zhong, X. Zhao, S. Liu, Characterization of Bitumen and a Novel Multiple Synergistic Method for Reducing Bitumen Viscosity with Nanoparticles and Surfactants, RSC 2020 (43) (2020) 25695-25707. https://doi.org/10.1039/D0RA03883K.

[191] J. Preethikaharshini, K. Naresh, G. Rajeshkumar, Review of advanced techniques for manufacturing biocomposites: non-destructive evaluation and artificial intelligence-assisted modeling, J. Mater. 20 (2022) 5447-5464. https://doi.org/10.1016/j.jmrt.2022.09.100.

[192] C. Wang, L. Gao, M. Liu, S. Xia, et al., Viscosity reduction mechanism of functionalized silica nanoparticles in heavy oil-water system, Fuel Process. Technol. 233 (2022) 107260, in: https://doi.org/10.1016/j.fuproc.2022.107260.

[193] X. Zhong, J. Chen, R. An, K. Li, et al., A state-of-the-art review of nanoparticle applications with a focus on heavy oil viscosity reduction, J. Mol. Liq. 337 (2021) 116355. https://doi.org/10.1016/j.molliq.2021.116355.

[194] J. Shao, N.M.H. Al-Aragi, D.J. Jasim, M.K. Abosaoda, Investigating the effect of external magnetic field on preventing deposition process in wax/asphaltene nanostructure using molecular dynamics simulation, Commun. Heat (2024). https://doi.org/10.1016/j.icheatmasstransfer.2024.108355.

[195] S. Alimohammadi, L. James, A global optimization approach for parameter estimation of cubic plus association equations of state in asphaltene modeling: studying the temperature, solvent, and binary interactions, Energy Fuels 36 (4) (2022) 2165-2178. https://doi.org/10.1021/acs.energyfuels.1c04037.

[196] Y. Liu, H. Mu, X. Lv, Y. Yu, W. Wang, Y. Mu, Q. Ma, Toward greener flow assurance: review of experimental and computational methods in designing and screening kinetic hydrate inhibitors, Energy Fuels 8 (3) (2024) 1445-1464. https://doi.org/10.1021/acs.energyfuels.3c03998.

[197] P.R. Ferreira Rocha, G. Fonseca Gonçalves, et al., Mechanisms of component degradation and multi-scale strategies for predicting composite durability: present and future perspectives, J. Comp. 8 (6) (2024) 204. https://doi.org/10.3390/jcs8060204.

[198] B.X. Chai, M. Gunaratne, M. Ravandi, J. Wang, Smart industrial internet of things framework for composites manufacturing, Sensors 24 (2) (2024) 781. https://doi.org/10.3390/s24020781.

[199] Y. Wang, K. Wang, C. Zhang, Applications of artificial intelligence/machine learning to high-performance composites, Compos. B Eng. 270 (2024) 111779. https://doi.org/10.1016/j.compositesb.2024.111779.

[200] A. Kumar, Perspectives of flow assurance problems in oil and gas production: a mini-review, Energy Fuels 37 (1) (2023) 123-135. https://doi.org/10.1021/acs.energyfuels.2c03246.

[201] A.A. Ali, G.H. Abdul-Majeed, A. Al-Sarkhi, Review of multiphase flow models in the petroleum engineering: classifications, simulator types, and applications, Arabian J. Sci. Eng. 49 (2024) 987-1004. https://doi.org/10.1007/s13369-023-08142-x.

[202] Y. Tian, J. Zhou, C. He, L. He, et al., The formation, stabilization and separation of oil-water emulsions: a review, Processes 0 (3) (2022) 556. https://doi.org/10.3390/pr10030556.

[203] M.M. Abdulredha, H.S. Aslina, C.A. Luqman, Overview on petroleum emulsions, formation, influence and demulsification treatment techniques, Arab. J. Chem. 13 (9) (2020) 7403-7417. https://doi.org/10.1016/j.arabjc.2020.06.004.

[204] M.S. Shalaby, G. Sołowski, Recent aspects in membrane separation for oil/water emulsion, Adv. Mater. 2 (3) (2021) 210014. https://doi.org/10.5185/amlett.2021.210014.

[205] B. Yao, C. Li, F. Yang, G. Sun, X. Xia, A.M. Ashmawy, Advances in and perspectives on strategies for improving the flowability of waxy oils, Energy Fuels 36 (15) (2022) 8010-8025. https://doi.org/10.1021/acs.energyfuels.2c01360.

[206] E.S. Dmitrieva, T.S. Anokhina, E.G. Novitsky, V.V. Volkov, Polymeric membranes for oil-water separation: a review, Polymers 14 (4) (2022) 712. https://doi.org/10.3390/polym14040712.

[207] B. Li, B. Qi, Z. Guo, D. Wang, et al., Recent developments in the application of membrane separation technology and its challenges in oil-water separation: a review, Chemosphere 324 (2023) 138079. https://doi.org/10.1016/j.chemosphere.2023.138079.

[208] J.M.A. Juve, F.M.S. Christensen, Y. Wang, Z. Wei, Electrodialysis for metal removal and recovery: a review, Chem. Eng. 443 (2022) 137221. https://doi.org/10.1016/j.cej.2022.137221.

[209] Z. Wawryniuk, E. Brancewicz-Steinmetz, Revolutionizing transportation: an overview of 3D printing in aviation, automotive, and space industries, Manuf. Technol. 134 (2024) 3083-3105. https://doi.org/10.1007/s00170-024-14226-y.

[210] S. Ghasemi, M. Sibi, D.C. Webster, Techno-economic assessment and carbon pricing analysis for economic feasibility of epoxidized sucrose soyate: a biobased thermoset resin, J. Clean. Prod. 438 (2024) 140939. https://doi.org/10.1016/j.jclepro.2024.140939.