Design and performance evaluation of nano-based drilling fluid system for hydrate bearing sediments

Abstract

Well drilling operations are essential for the exploration and development of natural gas hydrates. However, under specific c conditions, drilling fluids can invade reservoirs, leading to borehole instability and distortions in well-logging data. The incorporation of nanoparticles has proven to be an effective method to enhance the anti-filtration and pore or fracture plugging capabilities of drilling fluids, thus improving wellbore stability. Additionally, research has shown that a targeted concentration of hydrophilic nanoparticles can inhibit hydrate formation. This study focuses on hydrophilic nano-CaCO₃ particles as specialized additives for drilling fluids and proposes a nano-based hydrate drilling fluid system. The performance and hydrate inhibition of this modified ed drilling fluid were comprehensively evaluated. The designed formulation for the simulated drilling fluid was determined to be: 1.0% CMC + 0.1% PAM + 0.1% XC + 5.0% NaCl + 5.0% KCl + 1.0% PVCap + 1.0%-6.0% nano-CaCO₃. The designed drilling fluid system achieved a colloidal stability exceeding 97%, with a density range of 1.08-1.10 g/cm³. Its apparent viscosity ranged from 36 to 79.5 mPa·s, plastic viscosity from 27 to 42 mPa·s, and dynamic shear force from 8.176 to 38.325 Pa. The rheological effects of nanoparticles are concentration-dependent, with minimal changes at 1-4 wt% and significant increases at 5-6 wt%, enabling performance tuning for drilling needs. The pH value of the fluid was approximately 7, which could be modified ed by the addition of alkaline substances. Furthermore, as the nanoparticle concentration increased, the fluid's filtration rate progressively decreased. Therefore, this nano-CaCO₃-based drilling fluid system demonstrates excellent reservoir protection properties and is well-suited for drilling in marine hydrate-bearing sediments.

Keywords

Natural gas hydrate / Drilling fluid / Nano-CaCO₃ particles / Inhibition effect / Performance evaluation

CRediT authorship contribution statement

Dongdong Guo: Formal analysis, Methodology, Writing-original draft, Funding acquisition. Jiaxin Sun: Conceptualization, Investigation. Bing Liu: Data curation. Hengyin Zhu: Validation, Supervision. Ren Wang: Formal analysis, Methodology, Visualization. Fulong Ning: Funding acquisition, Validation, Writing-review & editing, Conceptualization.

Declaration of competing interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Acknowledgements

This work was supported by the Natural Science Research Project of Anhui Educational Committee (No. 2023AH051222), the National Natural Science Foundation of China (No. 42402319), Young Talent Nurturing Program of Anhui Association For Science and Technology (No. RCTJ202403), the Anhui Provincial Natural Science Foundation (No. 2308085QE151), the Open Foundation of the Innovation Base of Fine Mine Prospecting and Intelligent Monitoring Technology (No. 2023-MPIM-01). It was partly supported by the Open Fund of Engineering Research Center of Rock-Soil Drilling & Excavation and Protection (No. 202407).

References

[1] E.D. Sloan, Fundamental principles and applications of natural gas hydrates, Nature 426 (6964) (2003) 353-363.

[2] E.G. Hammerschmidt, Formation of gas hydrates in natural gas transmission lines, Ind. Eng. Chem. 26 (1934) 851-855.

[3] R. Boswell, T.S. Collett, Current perspectives on gas hydrate resources, Energy Environ. Sci. 4 (4) (2011) 1206-1215.

[4] T. Collett, J.J. Bahk, R. Baker, Methane hydrates in nature current knowledge and challenges, J. Chem. Eng. Data 60 (2) (2015) 319-329.

[5] Z.R. Chong, S.H.B. Yang, P. Babu, et al., Review of natural gas hydrates as an energy resource: prospects and challenges, Appl. Energy 162 (2016) 1633-1652.

[6] X.Y. Fang, D.H. Yang, F.L. Ning, et al., Experimental study on sand production and coupling response of silty hydrate reservoir with different contents of fine clay during depressurization, Petroleum 9 (1) (2023) 72-82.

[7] G.D. Spence, R.D. Hyndman, The challenge of deep ocean drilling for natural gas hydrate, Geosci. Can. 28 (4) (2001) 179-186.

[8] D.R. McConnell, Z. Zhang, R. Boswell, Review of progress in evaluating gas hydrate drilling hazards, Mar. Petrol. Geol. 34 (1) (2012) 209-223.

[9] J.X. Sun, F.L. Ning, N.Y. Wu, et al., The effect of drilling mud properties on shallow lateral resistivity logging of gas hydrate bearing sediments, J. Petrol. Sci. Eng. 127 (2015) 259-269.

[10] F.L. Ning, K.N. Zhang, N.Y. Wu, et al., Invasion of drilling mud into gas-hydrate-bearing sediments. Part I: effect of drilling mud properties, Geophys. J. Int. 193 (3) (2013) 1370-1384.

[11] M.N. Luo, J.W. Ai, F. Chen, et al., Evaluation of sealing characteristics of nano materials CQ-NZC in oil based drilling fluids, Chem. Ind. Eng. Prog. 34 (5) (2015) 1395-1400.

[12] X. Huang, J. Sun, K. Lv, et al., Application of core-shell structural acrylic resin/nano-SiO₂ composite in water based drilling fluid to plug shale pores, J. Nat. Gas Sci. Eng. 55 (2018) 418-425.

[13] R. Wang, T. Liu, F. Ning, et al., Effect of hydrophilic silica nanoparticles on hydrate formation: Insight from the experimental study, J. Energy Chem. (2019) 90-100.

[14] D.D. Guo, W.J. Ou, F.L. Ning, et al., Effects of hydrophilic and hydrophobic nano-CaCO₃ on kinetics of hydrate formation, Energy Sci. Eng. 00 (2022) 1-18.

[15] G. Cheraghian, Nanoparticles in drilling fluid: A review of the state-of-the-art, J. Mater. Res. Technol. 13 (2021 Jul 1) 737-753.

[16] M. Al-Shargabi, S. Davoodi, D.A. Wood, et al., Nanoparticle applications as beneficial oil and gas drilling fluid additives: A review, J. Mol. Liq. 352 (2022) 118725.

[17] R. Rafati, S.R. Smith, A.S. Haddad, et al., Effect of nanoparticles on the modifications of drilling fluids properties: A review of recent advances, J. Petrol. Sci. Eng. 161 (2018) 61-76.

[18] J. Min, D.W. Kang, W. Lee, et al., Molecular dynamics simulations of hydrophobic nanoparticle effects on gas hydrate formation, J. Phys. Chem. C 124 (7) (2020) 4162-4171.

[19] A. McElligott, H. Uddin, J.L. Meunier, et al., Effects of hydrophobic and hydrophilic graphene nanoflakes on methane hydrate kinetics, Energy Fuels 33 (11) (2019) 11705-11711.

[20] M. Xu, X. Fang, F. Ning, et al., Effect of hydrophilic silica nanoparticles on hydrate formation during methane gas migration in a simulated wellbore, Petroleum 7 (4) (2021) 485-495.

[21] A. Fereidounpour, A. Vatani, Designing a polyacrylate drilling fluid system to improve wellbore stability in hydrate bearing sediments, J. Nat. Gas Sci. Eng. 26 (2015) 921-926.

[22] Y.L. Ma, Y. Zhang, X.D. Liu, et al., A drilling fluid which inhibits formation of natural gas hydrate at low temperatures in offshore drilling, Drill. Fluid Complet. Fluid 38 (5) (2021) 544-551.

[23] D.D. Guo, F.F. Huang, F.L. Ning, et al., Research progress of scientific ocean drilling and marine hydrate drilling dluid system, Offshore Oil 43 (3) (2023) 64-69.

[24] R. Caenn, C.D. Henry, R.G. George, Composition and Properties of Drilling and Completion fluids[M], Gulf professional publishing, 2011.

[25] J.N. Yan, Drilling Fluid Technology (In Chinese)[M], Petroleum Industry Press, Beijing, 2013. ISBN: 9787502186904.

[26] F.L. Ning, N.Y. Wu, Y.B. Yu, et al., Invasion of drilling mud into gas-hydrate-bearing sediments. Part II: Effects of geophysical properties of sediments, Geophys. J. Int. 193 (3) (2013) 1385-1398.

[27] W. Cheng, F. Ning, J. Sun, et al., A porothermoelastic wellbore stability model for riserless drilling through gas hydrate-bearing sediments in the Shenhu area of the South China Sea, J. Nat. Gas Sci. Eng. 72 (2019) 103036-.

[28] R. Wiśniewski, K. Skrzypaszek, T. Małachowski, Selection of a suitable rheological model for drilling fluid using applied numerical methods, Energies 13 (12) (2020) 3192.

[29] O.E. Agwu, J.U. Akpabio, M.E. Ekpenyong, et al., A critical review of drilling mud rheological models, J. Pet. Sci. Eng. 203 (2021) 108659.

[30] M.C. Li, Q. Wu, K. Song, et al., pH-responsive water-based drilling fluids containing bentonite and chitin nanocrystals, ACS Sustain. Chem. Eng. 6 (3) (2018) 3783-3795.

[31] F.L. Ning, J.Q. Liang, N.Y. Wu, et al., Reservoir characteristics of natural gas hydrates in China, Nat. Gas. Ind. 40 (8) (2020) 1-24.

[32] C. Sahu, R. Kumar, J.S. Sangwai, Comprehensive review on exploration and drilling techniques for natural gas hydrate reservoirs, Energy Fuels 34 (10) (2020) 11813-11839.

[33] T.D. Brown, C.E. Taylor, M.P. Bernardo, Rapid gas hydrate formation processes: will they work? Energies 3 (6) (2010) 1154-1175.

[34] M. Maiti, R. Ranjan, E. Chaturvedi, et al., Formulation and characterization of water-based drilling fluids for gas hydrate reservoirs with efficient inhibition properties, J. Dispersion Sci. Technol. 42 (3) (2021) 338-351.