Using ultrasonic and microwave to prevent and reduce wax deposition in oil production

Abstract

Wax deposition in oil and gas pipelines and equipment is a fundamental challenge that can lead to a decrease in the performance and useful life of these systems. To address this issue, various methods have been developed to reduce wax deposition. This article investigates two novel methods, namely microwave and ultrasonic, for wax deposition mitigation. The microwave method utilizes high-frequency electromagnetic waves and short wavelengths to transfer heat to the wax and separate it from the internal surface of the pipelines. In this method, microwave waves provide energy to the wax, increasing its temperature and causing it to melt and move. Due to its speed, efficiency, and applicability in industrial environments, the microwave method has been recognized as a leading approach in wax deposition reduction, requiring minimal modifications to the pipeline structure. The ultrasonic method employs high-frequency sound waves to disrupt and prevent wax deposition. Ultrasonic waves generate alternating pressure waves at the site of wax accumulation, breaking down the wax structure. This non-destructive and reliable method is capable of reducing wax deposition in hard-to-reach areas. Both microwave and ultrasonic methods have gained attention as innovative approaches for wax deposition reduction. However, further research is needed to optimize and enhance these methods, aiming to improve their implementation capabilities, increase efficiency, and reduce costs. The study also addressed conventional and common methods, such as insulators heat-proofing materials, heating techniques to prevent wax deposition, cold flow, wax inhibiting tools, wax removal techniques, chemicals, and bacterial treatment.

Keywords

Wax / Wax deposition / Microwave / Ultrasonic

Data availability

All data generated or analyzed during this study are included in this published article.

CRediT authorship contribution statement

Ali Akbari: Writing -review & editing, Writing -original draft, Visualization, Validation, Supervision, Software, Resources, Project administration, Methodology, Investigation, Funding acquisition, Formal analysis, Data curation. Yousef Kazemzadeh: Writing -review & editing, Writing -original draft, Visualization, Validation, Supervision, Software, Resources, Project administration, Methodology, Investigation, Funding acquisition, Formal analysis, Data curation, Conceptualization. Dmitriy A. Martyushev: Writing -review & editing, Writing -original draft, Visualization, Supervision, Software, Resources, Project administration, Methodology, Funding acquisition, Formal analysis, Conceptualization. Farid Cortes: Writing -review & editing, Writing -original draft, Visualization, Validation, Supervision, Software, Resources, Project administration, Methodology, Investigation, Funding acquisition, Formal analysis, Data curation, Conceptualization.

Declaration of competing interest

The authors have no conflicts of interest to declare.

References

[1] H. Li, J. Zhang, C. Song, G. Sun, The influence of the heating temperature on the yield stress and pour point of waxy crude oils, J. Petrol. Sci. Eng. 135 (2015) 476-483.

[2] L.Z. Hao, H.S. Al-Salim, N. Ridzuan, A review of the mechanism and role of wax inhibitors in the wax deposition and precipitation, Pertanika J. Sci. Technol. 27 (1) (2019).

[3] A. Sousa, T. Ribeiro, M. Pereira, H. Matos, Review of the economic and environmental impacts of producing waxy crude oils, Energies 16 (1) (2023) 120.

[4] Z. Huang, S. Zheng, H.S. Fogler, Wax Deposition: Experimental Characterizations, Theoretical Modeling, and Field Practices, 2016.

[5] J. Kleinhans, V. Niesen, T. Brown,Pompano paraffin calibration field trials, in:SPE Annual Technical Conference and Exhibition?, 2000. SPE-62946-MS:SPE.

[6] M.E. Mohyaldinn, H. Husin, N. Hasan, M. Elmubarak, A. Genefid, M. Dheeb, Challenges during operation and shutdown of waxy crude pipelines, in: Processing of Heavy Crude OilsdChallenges and Opportunities, IntechOpen, Rijeka, Croatia, 2019, p. 153.

[7] A. Sulaimon, G. Falade, W. DeLandro, A proactive approach for predicting and preventing wax deposition in production tubing strings: a Niger Delta experience, J. Petrol. Gas Eng. 1 (2) (2010) 26-36.

[8] L. Azevedo, A.M. Teixeira, A critical review of the modeling of wax deposition mechanisms, Petrol. Sci. Technol. 21 (3-4) (2003) 393-408.

[9] I. Elganidi, B. Elarbe, N. Ridzuan, N. Abdullah, A review on wax deposition issue and its impact on the operational factors in the crude oil pipeline, Malays. J. Fundam. Appl. Sci. 17 (1) (2021) 44-49.

[10] E. Chouparova, et al., Characterization of petroleum deposits formed in a producing well by synchrotron radiation-based microanalyses, Energy Fuels 18 (4) (2004) 1199-1212.

[11] M.A. Theyab, Wax deposition process: mechanisms, affecting factors and mitigation methods, Open Access J. Sci 2 (2) (2018) 112-118.

[12] O.E. Ajayi, Modelling of Controlled Wax Deposition and Loosening in Oil and Gas Production Systems, Institutt for energi-og prosessteknikk, 2013.

[13] M. Rehan, A.-S. Nizami, O. Taylan, B.O. Al-Sasi, A. Demirbas, Determination of wax content in crude oil, Petrol. Sci. Technol. 34 (9) (2016) 799-804.

[14] J. Southgate, Wax Removal Using Pipeline Pigs, Durham University, 2004.

[15] P. Singh, R. Venkatesan, H.S. Fogler, N.R. Nagarajan, Morphological evolution of thick wax deposits during aging, AIChE J. 47 (1) (2001) 6-18.

[16] L. Ismail, R.E. Westacott, X. Ni, On the effect of wax content on paraffin wax deposition in a batch oscillatory baffled tube apparatus, Chem. Eng. J. 137 (2) (2008) 205-213.

[17] L.O. Oyekunle, O.A. Adeyanju, T.I. Phillips, Evaluations of the effect of selected wax inhibitive chemicals on wax deposition in crude oil flow in sub-sea pipelines, Petrol. Sci. Technol. 35 (20) (2017) 1967-1973.

[18] A. Japper-Jaafar, P. Bhaskoro, Z. Mior, A new perspective on the measurements of wax appearance temperature: comparison between DSC, thermomicroscopy and rheometry and the cooling rate effects, J. Pet. Sci. Eng. 147 (2016) 672-681.

[19] N.H. Mohamed, F.S. Soliman, H. El Maghraby, Y. Moustfa, Thermal conductivity enhancement of treated petroleum waxes, as phase change material, by a nano alumina: energy storage, Renew. Sustain. Energy Rev. 70 (2017) 1052-1058.

[20] P. Singh, R. Venkatesan, H.S. Fogler, N. Nagarajan, Formation and aging of incipient thin film wax-oil gels, AIChE J. 46 (5) (2000) 1059-1074.

[21] B. Yao, et al., Ethyleneevinyl acetate copolymer and resin-stabilized asphaltenes synergistically improve the flow behavior of model waxy oils. 2. Effect of asphaltene content, Energy Fuels 32 (5) (2018) 5834-5845.

[22] A. Aiyejina, D.P. Chakrabarti, A. Pilgrim, M.J. Sastry, Wax formation in oil pipelines: a critical review, Int. J. Multiphas. Flow 37 (7) (2011) 671-694.

[23] T. Al-Shboul, F. Sagala, N.N. Nassar, Role of surfactants, polymer, nanoparticles, and its combination in inhibition of wax deposition and precipitation: a review, Adv. Colloid Interface Sci. (2023) 102904.

[24] N.V. Bhat, A.K. Mehrotra, Modeling of deposition from “waxy” mixtures in a pipeline under laminar flow conditions via moving boundary formulation, Ind. Eng. Chem. 45 (25) (2006) 8728-8737.

[25] D. Merino-Garcia, M. Margarone, S. Correra, Kinetics of waxy gel formation from batch experiments, Energy Fuels 21 (3) (2007) 1287-1295.

[26] A.K. Mehrotra, S. Ehsani, S. Haj-Shafiei, A.S. Kasumu, A review of heat-transfer mechanism for solid deposition from “waxy” or paraffinic mixtures, Can. J. Chem. Eng. 98 (12) (2020) 2463-2488.

[27] S. Ehsani, A.K. Mehrotra, Effects of shear rate and time on deposit composition in the cold flow regime under laminar flow conditions, Fuel 259 (2020) 116238.

[28] E. Ramirez-Jaramillo, C. Lira-Galeana, O. Manero, Modeling wax deposition in pipelines, Pet. Sci. Technol. 22 (7-8) (2004) 821-861.

[29] A.K. Mehrotra, N.V. Bhat, Modeling the effect of shear stress on deposition from “waxy” mixtures under laminar flow with heat transfer, Energy Fuels 21 (3) (2007) 1277-1286.

[30] K.G. Paso, H.S. Fogler, Bulk stabilization in wax deposition systems, Energy Fuels 18 (4) (2004) 1005-1013.

[31] H.S. Lee, Computational and Rheological Study of Wax Deposition and Gelation in Subsea Pipelines, 2008.

[32] C. Van Der Geest, V.C.B. Guersoni, D. Merino-Garcia, A.C. Bannwart, Wax deposition experiment with highly paraffinic crude oil in laminar single-phase flow unpredictable by molecular diffusion mechanism, Energy Fuels 32 (3) (2018) 3406-3419.

[33] H.M.B. Veiga, F.P. Fleming, L.F.A. Azevedo, Wax deposit thermal conductivity measurements under flowing conditions, Energy Fuels 31 (2017) 11532-11547.

[34] F.P. Fleming, Fundamental Study of Wax Deposition under Real Flow Conditions, 2018, p. 210.

[35] L. Fusi, On the stationary flow of a waxy crude oil with deposition mechanisms, Nonlinear Anal. Theor. Methods Appl. 53 (3-4) (2003) 507-526.

[36] E. Burger, T. Perkins, J.H. Striegler, Studies of wax deposition in the trans Alaska pipeline, J. Pet. Technol. 33 (6) (1981) 1075-1086.

[37] S. Todi, M. Deo, Experimental and modeling studies of wax deposition in crude-oil-carrying pipelines, in: Offshore technology conference, OnePetro, 2006.

[38] R. Banki, H. Hoteit, A. Firoozabadi, Mathematical formulation and numerical modeling of wax deposition in pipelines from enthalpyeporosity approach and irreversible thermodynamics, Int. J. Heat Mass 51 (13-14) (2008) 3387-3398.

[39] C. Ma, et al., Electrical treatment of waxy crude oil to improve its cold flowability, Industrial 56 (38) (2017) 10920-10928.

[40] Z. Huang, H.S. Lee, M. Senra, H. Scott Fogler, A fundamental model of wax deposition in subsea oil pipelines, Energy Fuels 57 (11) (2011) 2955-2964.

[41] Y. Lu, Z. Huang, R. Hoffmann, L. Amundsen, H.S. Fogler, Counterintuitive effects of the oil flow rate on wax deposition, Energy Fuels 26 (7) (2012) 4091-4097.

[42] W. Wang, Q. Huang, Prediction for wax deposition in oil pipelines validated by field pigging, J. Energy Inst. 87 (3) (2014) 196-207.

[43] Z. Hu, M. Wu, K. Hu, J. Liu, Prediction of wax deposition in an insulation crude oil pipeline, Petrol. Sci. Technol. 33 (15-16) (2015) 1499-1507.

[44] M.J. Jalalnezhad, V. Kamali, Development of an intelligent model for wax deposition in oil pipeline, J. Pet. Explor. Prod. Technol. 6 (2016) 129-133.

[45] M. White, K. Pierce, T. Acharya, A review of wax-formation/mitigation technologies in the petroleum industry, SPE Prod. Oper. 33 (3) (2017) 476-485, https://doi.org/10.2118/189447-PA.SPE-189447-PA.

[46] A. Quenelle, M. Gunaltun, “Comparison between Thermal Insulation Coatings for Underwater Pipelines,” in Offshore Technology Conference, OnePetro, 1987.

[47] M.C.K. de Oliveira, et al., Waxy crude oil emulsion gel: impact on flow assurance, Energy Fuels 24 (4) (2010) 2287-2293.

[48] A. Bahadori, Gas, Petrochemical Industries, in: Design and Application of Thermal Insulation, Elsevier Inc, 2014.

[49] M. Bagdat, R. Masoud, Control of paraffin deposition in production operation by using ethyleneeTetraFluoroEthylene (ETFE),in:ICIPEG 2014: Proceedings of the International Conference on Integrated Petroleum Engineering and Geosciences, Springer, 2015, pp. 13-21.

[50] G. Lively, Flow assurance begins with downhole insulation, in: Offshore Technology Conference, OnePetro, 2002.

[51] P. Singh, et al., An application of vacuum-insulation tubing for wax control in an Arctic environment, SPE Drill. Complet. 22 (2) (2007) 127-136.

[52] I. Pavel, V. Kirill, A. Kozlov, Application of epoxy coatings to increase the efficiency of wax oils production, Inventions 18 (5) (2022) 1229-1241.

[53] F.G. Bosch, K.J. Schmitt, B.J. Eastlund, Evaluation of downhole electric impedance heating systems for paraffin control in oil wells, IEEE Trans. Ind. Appl. 28 (1) (1992) 190-195.

[54] D. Merino-Garcia, S. Correra, “Cold flow: a review of a technology to avoid wax deposition, Petrol. Sci. Technol. 26 (4) (2008) 446-459.

[55] D.S. Danilović, V.D. Karović-Marićić, V.B. Ćokorilo, Solving paraffin deposition problem in tubing by heating cable application, Therm. Sci. 14 (1) (2010) 247-253.

[56] H. Haghighi, R. Azarinezhad, A. Chapoy, R. Anderson, B. Tohidi, Hydraflow: avoiding gas hydrate problems,in:EUROPEC/EAGE Conference and Exhibition, OnePetro, 2007.

[57] R. Azarinezhad, A. Chapoy, R. Anderson, B. Tohidi, A wet cold-flow technology for tackling offshore flow-assurance problems, SPE Proj. Facil. Constr. 5 (2) (2010) 58-64.

[58] A. Sousa, H. Matos, L. Guerreiro, Preventing and removing wax deposition inside vertical wells: a review, J. Pet. Explor. Prod. Technol. 9 (2019) 2091-2107.

[59] C. Anyanwu, E. Agbo, B. Olusola, O. Olowoyeye, B. Njoku, Wax removal and prevention in an old welldlessons learnt, in: SPE Nigeria Annual International Conference and Exhibition, OnePetro, 2020.

[60] B. Yao, et al., Pre-heating temperature induced flowability and wax deposition characteristics of crude oil adding wax inhibitors, Pet. Sci. (2023).

[61] H. Li, et al., Influence of asphaltene on wax deposition: deposition inhibition and sloughing, Fuel 266 (2020) 117047.

[62] M. Razavifar, J. Qajar, Experimental investigation of the ultrasonic wave effects on the viscosity and thermal behaviour of an asphaltenic crude oil, J. Chem. Eng. Process. Process Intensif. 153 (2020) 107964.

[63] T. Manku, Microwave CMOS-device physics and design, IEEE J. Solid State Circ. 34 (3) (1999) 277-285.

[64] W. Hu, N. Sugiyama, J.J.N. Silk, The physics of microwave background anisotropies, Nature 386 (6620) (1997) 37-43.

[65] M. Vollmer, Physics of the microwave oven, Phys. Educ. 39 (1) (2004) 74.

[66] R. Chow, et al., Precipitation of wax from crude oil under the influence of a magnetic field, J. Can. Petrol. Technol. 39 (6) (2000).

[67] J. Taheri-Shakib, A. Shekarifard, H. Naderi,Characterization of the wax precipitation in Iranian crude oil based on wax appearance temperature (WAT): Part 1. The influence of electromagnetic waves, J. Petrol. Sci. Eng. 161 (2018) 530-540.

[68] Y. Pan, X. Lou, S. Yang, X. Cui, Z.M. Stephan, Ultrasonic viscosity-reduction vacuum residue oil, Rev. Chem. Eng. 39 (6) (2023) 1085-1121.

[69] W.W. Zhang, T.T. Wang, X. Li, S.C. Zhang, The effect of magnetic field on the deposition of paraffin wax on the oil pipe, in: Advanced Materials Research vol. 788, Trans Tech Publ, 2013, pp. 719-722.

[70] N.P. Tung, et al., Studying the mechanism of magnetic field influence on paraffin crude oil viscosity and wax deposition reductions,in:SPE Asia Pacific Oil and Gas Conference and Exhibition, OnePetro, 2001.

[71] W.W. Zhang, D.D. Wang, T.T. Wang, S.C. Zhang, Study on the mechanism of magnetic paraffin control of crude oil based on the reorientation of paraffin crystals induced by magnetic field, Appl. Mech. Mater. 743 (2015) 137e141 (Trans Tech Publ).

[72] J. Jing, W. Shi, Q. Wang, B. Zhang, Viscosity-reduction mechanism of waxy crude oil in low-intensity magnetic field, Energy Sources A Recov. Util. Environ. Eff. 44 (2) (2022) 5080-5093.

[73] M. Mullakaev, V. Abramov, A. Abramova, Development of ultrasonic equipment and technology for well stimulation and enhanced oil recovery, J. Petrol. Sci. Eng. 125 (2015) 201-208.

[74] Y. Hou, R. Zhou, X. Long, P. Liu, Y. Fu, The design and simulation of new downhole vibration device about acoustic oil recovery technology, J. Pet. 1 (3) (2015) 257-263.

[75] B.F. Towler, A.K. Chejara, S. Mokhatab, Experimental investigations of ultrasonic waves effects on wax deposition during crude-oil production, in: SPE Annual Technical Conference and Exhibition, OnePetro, 2007.

[76] D.-G. Lee, et al., Monitoring and detection of paraffin wax deposition process based on ultrasonic analysis, J. Nanosci. Nanotechnol. 20 (1) (2020) 168-176.

[77] L. Zhou, Z. Wang, A comparison study on the removal of paraffin wax deposition plug by ultrasound treatment, chemical demulsifier and combination of ultrasound and chemical demulsifier, Petrol. Sci. Technol. 38 (9) (2020) 690-697.

[78] M. Al-Yaari, Paraffin wax deposition: mitigation & removal techniques,in:SPE Saudi Arabia Section Young Professionals Technical Symposium, OnePetro, 2011.

[79] M.R. Elkatory, et al., Mitigation and remediation technologies of waxy crude oils' deposition within transportation pipelines: a review, Polymers 14 (16) (2022) 3231.

[80] T. Straub, S. Autry, G. King, An investigation into practical removal of downhole paraffin by thermal methods and chemical solvents, in: SPE Production Operations Symposium, OnePetro, 1989.

[81] I. El-Gamal, T. Khidr, F.J.F. Ghuiba, Nitrogen-based copolymers as wax dispersants for paraffinic gas oils, Fuel 77 (5) (1998) 375-385.

[82] D.P. Rana, S. Bateja, S.K. Biswas, A. Kumar, T.R. Misra, B. Lal, Novel microbial process for mitigating wax deposition in down hole tubular and surface flow lines, in: SPE Oil and Gas India Conference and Exhibition, OnePetro, 2010.

[83] A. Lekomtsev, A. Kozlov, W. Kang, A. Dengaev, Designing of a washing composition model to conduct the hot flushing wells producing paraffin crude oil, J. Pet. Sci. Eng. 217 (2022) 110923.

[84] P. Ilushin, K. Vyatkin, A. Kozlov, Development of an approach for determining the effectiveness of inhibition of paraffin deposition on the wax flow loop laboratory installation, Inventions 7 (1) (2022) 3.