Numerical approach for enhanced oil recovery with surfactant flooding

Abstract

The remained oil in the reservoir after conventional water-flooding processes, forms a dispersed phase in the form of oil drops which is trapped by capillary forces and is almost about 70% of the original oil in the place (OOIP). To reduce oil residual saturation in laboratory experiments and field projects, surfactant flooding is effective via decreasing the interfacial tension mobility ratio between oil and water phases. Estimation of the role of design variables, like chemical concentrations, partition coefficient and injection rate in different performance quantities, considering a heterogeneous and multiphase oil reservoir is a critical stage for optimal design. Increasing demand for oil production from water-flooded reservoirs has caused an increasing interest in surfactant-polymer (SP) and alkali-surfactant-polymer (ASP). Modeling minimizes the risk of high cost of chemicals by improving our insight of process. In the present paper, a surfactant compositional flood model for a three-component (water, petroleum and surfactant), two phase (aqueous and oleic) system is studied. A homogeneous, two-dimensional, isothermal reservoir with no free gas or alkali is assumed. The governing equations are in three categories: the continuity equations for the transport of each component, Darcy's equation for the transport of each phase and other auxiliary equations. The equations are solved by finite-differences using a procedure implicit in pressure and explicit in saturation. The validation of the model is achieved through comparing the modeling results with CMG simulators and Buckley-Leverett theory. The results of modeling showed good agreement with CMG results, and the comparison with Buckley-Leverett theory is explained according to different assumptions. After validation of the model, in order to investigate sensitivity analysis, the effects of system variables (partition coefficient, surface tension, oil viscosity and surface injection concentration) and performance variable (cumulative oil recovery) are studied. Finally, the comparison of oil recovery between water-flooding and surfactant-flooding was done. The results showed higher oil recovery with changes in capillary number when the partition coefficient is greater than unity. Increasing oil viscosity resulted in decreasing the oil recovery by changing in fractional flow. Moreover, it was concluded that the oil recovery was enhanced by increasing surfactant injection concentration. The oil recovery was increased when surfactant was injected to the system and this result was obtained by comparing water-flooding and surfactant-flooding.

Keywords

Surfactant flooding / Numerical simulation / Finite difference / Two phases-three component system / Partition coefficient

References

[1] X. Xie, W. Weiss, Z. Tong, N. Morrow, Improved oil recovery from carbonate reservoirs by chemical stimulation, SPE J. 10 (2005) 276-285.

[2] M. Delshad, N. Fathi Najafabadi, G. Anderson, G. Pope, K. Sepehrnoori,Modeling wettability alteration in naturally fractured reservoirs, in:SPE/DOE Symposium on Improved Oil Recovery, 2006.

[3] S. Jun, Y. Cheng-zhi, Z.-y Yang, G.-z Lio, H. Yuan, Z.-j Dai, Y.-q Li, Z.-q Ye,Surfactant-alkaline-polymer flooding pilot project in non-acidic paraffin oil field in Daqing, in:SPE Asia Pacific Oil and Gas Conference and Exhibition, 2000.

[4] Golabi E.; Seyedeyn Azad F.; Ayatollahi S.; hosseini n.; Akhlaghi N.Experimental study of wettability alteration of Limestone rock from Oil Wet to Water Wet by Applying Various Surfactants. In SPE Heavy Oil Conference Canada.

[5] A. Kamari, M. Sattari, A.H. Mohammadi, D. Ramjugernath, Reliable method for the determination of surfactant retention in porous media during chemical flooding oil recovery, Fuel 158 (2015) 122-128.

[6] M.R. Yassin, M. Arabloo, A. Shokrollahi, A.H. Mohammadi, Prediction of surfactant retention in porous media: a robust modeling approach, J. Dispersion Sci. Technol. 35 (2014) 1407-1418.

[7] G. Paul, L. Lake, G. Pope, G. Young,A simplified predictive model for micellar-polymer flooding, in:SPE California Regional Meeting, 1982.

[8] G.A. Pope, B. Wang, K. Tsaur, A sensitivity study of micellar/polymer flooding, Old SPE J. 19 (1979) 357-368.

[9] D. Camilleri, S. Engelson, L.W. Lake, E.C. Lin, T. Ohnos, G. Pope, K. Sepehrnoori, Description of an improved compositional micellar/polymer simulator, SPE Reserv. Eng. 2 (1987) 427-432.

[10] D. Camilleri, A. Fil, G.A. Pope, B.A. Rouse, K. Sepehrnoori, Improvements in physical-property models used in micellar/polymer flooding, SPE Reserv. Eng. 2 (1987) 433-440.

[11] D. Camilleri, A. Fil, G.A. Pope, B.A. Rouse, K. Sepehrnoori, Comparison of an improved compositional micellar/polymer simulator with laboratory corefloods, SPE Reserv. Eng. 2 (1987) 441-451.

[12] C. Han, M. Delshad, K. Sepehrnoori, G. Pope, A fully implicit, parallel, compositional chemical flooding simulator,in: SPE Annual Technical Conference and Exhibition, 2005.

[13] M. Delshad, K. Asakawa, G.A. Pope, K. Sepehrnoori, Simulations of Chemical and Microbial Enhanced Oil Recovery Methods. Paper, SPE, 2002, p. 75237.

[14] Najafabadi N.F.; Delshad M.; Han C.; Sepehrnoori K. Formulations for a three-phase, fully implicit, parallel, EOS compositional surfactant^aV“polymer flooding simulator. J. Petroleum Sci. Eng., 86, 257-271.

[15] M. Sabeti, M.R. Ehsani, S. Katebifar, H. Delparish, Simple and confident approach in modeling miscible flow in petroleum reservoirs, in: The 8th International Chemical Engineering Congress & Exhibition (IChEC 2014):Kish, Iran, 2014.

[16] M. Sabeti, M.R. Ehsani, M. Nikookar, A.H. Mohammadi, Estimation of effect of diffusion and dispersion parameters on VAPEX process, J. Petroleum Sci. Eng. 132 (2015) 53-64.

[17] M. Sabeti, M.R. Ehsani, M. Nikookar, L. Sahranavard, A.H. Mohammadi, Prediction of breakthrough time in the VAPEX process with the numerical modeling, in: Enhanced Oil Recovery: Methods, Economic Benefits and Impacts on the Environment, Nova Science Publishers, 2014.

[18] L.W. Lake, Enhanced Oil Recovery, Prentice Hall Inc, United States, Old Tappan, NJ, 1989.

[19] N. Van Quy, J. Labrid, A Numerical Study of Chemical Flooding Comparison with Experiments, Society of Petroleum Engineers Journal 23 (3) (1983) 461-474.

[20] J.O. Amaefule, L.L. Handy, The Effect of Interfacial Tensions on Relative Oil/Water Permeabilities of Consolidated Porous Media, SPE, 1982.

[21] H.W. Brown, Capillary Pressure Investigations, Journal of Petroleum Technology 3 (3) (1951) 67-74.