The ultimate strength of doubler plate reinforced Y-joints under compression loading

Abstract

It is common practice in the offshore industry to solve the punching shear problem due to compression by using doubler plate. The finite-element method is a useful tool for studying this problem. The aim of this paper is to study the static strength of doubler plate reinforced Y-joints subjected to compression loading. The finite-element method is adopted in numerical parametric studies. The individual influences of the geometric parameters βand τ _d (doubler plate to chord wall thickness ratio) and l _d /d ₁ (dubler plate length to brace diameter ratio) on the ultimate strength are made clear. The results show the size of plate may have important effects on the strength of reinforced joints. It is found that the ultimate strength of Y-joints reinforced with appropriately proportioned doubler plates can be greatly improved nearly up tothree times to un-reinforced Y-joints.

Keywords

static strength / finite element analysis / doubler plates / reinforced joints / Y-joints

References

[1] CALLAN M D, WORDSWORTH A C, LIVETT I C, BOUDREAUX R H, HUEBSCH F J. BP Magnus platform internally stiffened bracing node studies [A]. Proc 13th Annual Offshore Technol Conf[C]. Houston: 1981.

[2] AGOSTONI A, TELLA V D, GNONE E, SEBASTIANI G. TSG integrated storage platform for early production in the North Sea [A]. Proc 12th Annual Offshore Technol Conf [C]. Houston: 1980.

[3] Holmes R, Brown G M, Kerr J. Internally ring stiffened tubular joints-Salvation or structural liability [A]. Proc 3rd Int Symp on Integrity of Offshore Structures[C]. 1987, Glasgow: Univ of Glasgow

[4] Reynolds A G, Sharp J V. Fatigue performance comparison of simple, overlapped and stiffened welded tubular joints[A]. Pro 3rd Int Symp on Integrity of Offshore Structures[C]. 1987, Glasgow: Univ of Glasgow

[5] Munaswamy K, Swamidas A S J, Hopkins R M, Monahan C, Vosikovsky O. Experimental study on fatigue of stiffened tubular T joints[A]. Proc 8th Int Conf on Offshore Mechanics and Arctic Eng [C]. 1989, Hague: the netherlands

[6] CHEN B. Review of studies in China on stress analysis of ring stiffened tubular joints for offshore structures [A]. Proc 9th Int Conf on Offshore Mechanics and Arctic Eng [C]. [s.l.], 1990.

[7] Ramachandra M, Madhava D S, Gandhi P, Pant P K. Structural efficiency of internally ring stiffened steel tubular joints[J]. J Struct Eng, 1992, 118(1): 3016-3035

[8] DHARMAVASAN S, AAGHAAKOUCHAK A. Estimation of stress concentration factors in a stiffened tubular joint using a shear flow model [A]. Proc 11th Int Conf on Offshore Mechanics and Arctic Eng[C]. [s.l.], 1992.

[9] Van der Vegte G J, Leray D H, Choo Y S. Axial strengthof uniplanar X-joints reinforce by shaped ring siffeners[A]. Proc Int Offshore and Polar Engrg Conf[C]. 1997, Golden: Int Society of Offshoreand Polar Engineers

[10] Ai-Kah, Chee-Kiong S. Stress analysis of axially loaded T tubular joints reinforced with doubler plates [J]. Computer & structure, 1993, 55(1): 141-149

[11] Fung T C, Chan T K. Ultimate capacity of doubler plate reinforced tubular joints [J]. Journal of Structural Engineering, 1999, 125(1): 891-899

[12] CHOO Y S, LIANG X, LIEW J Y R. Static strength of doubler plate reinforced X-joints under in-plane bending [A]. Proceeding of the twelfth International Offshore and Polar Engineering Conference [C]. Kitakyushu: 2002.

[13] CHOO Y S, LIANG X, LIEW J Y R. Static strength of doubler plate reinforced X-joints under out-of-plane bending [A]. Proceeding of the twelfth International Offshore and Polar Engineering Conference[C]. Kitakyushu:2002.

[14] Marcus M K, Lee E D. Finite element modeling of multiplanar offshore tubular joints[J]. Journal of Offshore Mechanics and Arctic Engineering, 2004, 126(1): 120-128

[15] Lie S T, Lee C K. Modeling and mesh generation of weld profile in tubular Y-joint [J]. Journal of Constructional Steel Research, 2000, 57(1): 547-567

[16] CHOO Y S, LI B H, Van der VEGTE G J, ZETTLEMOYER N, LIEW J Y R, Static strength of T-joins reinforced with doubler or collar plates [A], proc 8th Int sympon Tubular structures[C]. [s.l.], 1998.

[17] YURA J A, ZETTLEMOVER N, and EDWARDS I Fultimate capacity equations for tubular joints[A]. Proceedings of offshore Technology conference[C]. Houston, 1980.

[18] De Noordhoed Back, Amsterdam E, Reynolds A G, Sharp J V. Fatigue performance comparison of simple, overlapped and stiffened welded tubular joints [A]. Proc 3rd Int Symp on Integrity of Offshore Structures [C]. 1987, Glasgow: Univ of Glasgow

[19] RECHO N, ANDREAU C, BOUET E, PALAMAS J. Evaluation of stress concentration factors in ring-stiffened tubular joints[A]. Proc 3rd Int ECSC Offshore Conf on Steel in Marine Structures [C]. Delft, Netherlands: 1987.