Effect of interlayer cold joint on mechanical properties and permeability of roller compacted concrete

Abstract

One issue with layer application of roller compacted concrete (RCC) is the development of cold joints, which can cause damage to RCC structures. In this study, fly ash was used in place of 0%, 20%, 40%, and 60% of the cement or aggregate to examine the impact of interlayer cold joint formation on RCC mixtures. To promote cold joint formation, the second layer was placed and compacted with a delay of 0, 60, 120, or 180 min after the first layer. Three methods were tried for preventing cold joints from forming: one was to apply a bedding mortar to the interlayer, another was to add a set retarder admixture, and the third was to spray an adhesion-enhancing chemical additive on the surface of the first layer. Based on the 28 d specimens’ compressive and splitting-tensile strengths as well as the depth of water penetration under pressure, the most effective method was found to be applying interlayer bedding mortar. Considering 180 min delayed layer castings, the splitting-tensile and compressive strengths of the control samples decreased by 31% and 17%, respectively, while the strengths of mixtures applying interlayer bedding mortar decreased by 9% and 10%. In addition, bedding mortar treatment decreased the water permeability by 59% compared to the control. Interlayer cold joint decreased all mixtures’ moduli of elasticity, regardless of the age of the specimens. When the interlayer delay was 60 min, the modulus of elasticity decreased by 1%–4%. It was between 2% and 14%, and between 10% and 24% at 120 and 180 min for the interlayer delay. The longer the delay in placing the second RCC layer, the more detrimental the effect of the cold joint. This effect was most noticeable on mechanical and permeability properties tested with applied load or water pressure parallel to the cold joint, such as flexural and splitting tensile strengths and water penetration depth under pressure.

Graphical abstract

Keywords

roller compacted concrete / cold joint / mechanical properties / permeability properties / fly ash

References

[1] Williams S G. Construction of roller-compacted concrete pavement in the Fayetteville Shale Play area, Arkansas. Transportation Research Record: Journal of the Transportation Research Board, 2014, 2408(1): 47–54

[2] KhayatK HLibreN AWuZ. Roller Compacted Concrete for Rapid Pavement Construction. Rolla, MO: Research on Concrete Applications for Sustainable Transportation (RE-CAST)(UTC), 2019

[3] MehtaP K. Concrete technology for sustainable development: An overview of essential principles. In: Proceedings of Vancouver CANMET/ACI International Symposium on Concrete Technology for Sustainable Development. Vancouver: CANMET, 1999

[4] Atiş C D. Strength properties of high-volume fly ash roller compacted and workable concrete, and influence of curing condition. Cement and Concrete Research, 2005, 35(6): 1112–1121

[5] Bentz D P, Ferraris C F. Rheology and setting of high volume fly ash mixtures. Cement and Concrete Composites, 2010, 32(4): 265–270

[6] van den Heede P, Gruyaert E, de Belie N. Transport properties of high-volume fly ash concrete: Capillary water sorption, water sorption under vacuum and gas permeability. Cement and Concrete Composites, 2010, 32(10): 749–756

[7] Bayqra S H, Mardani-Aghabaglou A, Ramyar K. Physical and mechanical properties of high volume fly ash roller compacted concrete pavement (A laboratory and case study). Construction and Building Materials, 2022, 314: 125664

[8] Banthia N, Pigeon M, Marchand J, Boisvert J. Permeability of roller compacted concrete. Journal of Materials in Civil Engineering, 1992, 4(1): 27–40

[9] Kokubu K, Cabrera J G, Ueno A. Compaction properties of roller compacted concrete. Cement and Concrete Composites, 1996, 18(2): 109–117

[10] Zhang G X, Liu G T, Wu Y. Harmonic thermal fracture of multiple crack system and the stability of cracks in RCC arch dam. Engineering Fracture Mechanics, 1996, 54(5): 653–665

[11] Chai J, Li K H, Wu Y Q, Li S Y. Coupled seepage and stress fields in roller compacted concrete dam. Communications in Numerical Methods in Engineering, 2005, 21(1): 13–21

[12] Bayqra S H, Mardani A, Özen S, Ramyar K. Effect of delayed placement of layers on permeability and durability of roller-compacted concrete containing fly ash. International Journal of Pavement Engineering, 2023, 24(2): 2075552

[13] Illangakoon G B, Asamoto S, Nanayakkara A, Trong L N. Concrete cold joint formation in hot weather conditions. Construction and Building Materials, 2019, 209: 406–415

[14] JatheeshanVPeirisT N UMendisL B S KNanayakkaraS M A. Investigation of the factors affecting the formation of cold joints in concrete. In: Proceedings of 16th ERU symposium, Faculty of Engineering. Moratuwa: University of Moratuwa, 2010

[15] DuanYLaiG. Study on failure mechanism of roller compacted concrete gravity dam. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1995, 8(32): 401A (in Chinese)

[16] Rongmei J, Wei F. Impact of interlayer and size effect on the mechanical performances of fully graded RCC. Water Power, 2007, 33(4): 20–22

[17] ShaSLeiZZhangX. Study on failure mechanism of roller compacted concrete gravity dams by an isotropic damage model. In: Proceedings of 2016 International Conference on Smart City and Systems Engineering (ICSCSE). Changsha: IEEE, 2016, 68–71

[18] WilliamsB AGreenB HAndreattaR AMorsonJ ATaylorM KWalkerK EWilsonD EHartW S. Investigation of Lift Bonding for Roller-Compacted Concrete with Low Normal Loads at Variable Placement Times. Washington, D.C.: US Army Corps of Engineers, 2013

[19] Karimpour A. Effect of time span between mixing and compacting on roller compacted concrete (RCC) containing ground granulated blast furnace slag (GGBFS). Construction and Building Materials, 2010, 24(11): 2079–2083

[20] Ribeiro A B, Diez-Cascon J, Gonçalves A F. Roller compacted concrete-tensile strength of horizontal joints. Materials and Structures, 2001, 34(7): 413–417

[21] Mardani-Aghabaglou A, Andiç-Çakir Ö, Ramyar K. Freeze–thaw resistance and transport properties of high-volume fly ash roller compacted concrete designed by maximum density method. Cement and Concrete Composites, 2013, 37: 259–266

[22] Li M C, Guo X Y, Shi J, Zhu Z B. Seepage and stress analysis of anti-seepage structures constructed with different concrete materials in an RCC gravity dam. Water Science and Engineering, 2015, 8(4): 326–334

[23] AguiarJ LCameloA M R ORibeiroA C B S. Roller compacted concrete (RCC): Strength and permeability of horizontal joints. In: Proceedings of International Congress Challenges of Concrete Construction—Sustainable Concrete Construction. Dundee: Thomas Telford Publishing, 2002, 751–760

[24] Qian P, Xu Q. Experimental investigation on properties of interface between concrete layers. Construction and Building Materials, 2018, 174: 120–129

[25] Liu G, Lu W, Lou Y, Pan W, Wang Z. Interlayer shear strength of Roller compacted concrete (RCC) with various interlayer treatments. Construction and Building Materials, 2018, 166: 647–656

[26] Mardani-Aghabaglou A, Ramyar K. Mechanical properties of high-volume fly ash roller compacted concrete designed by maximum density method. Construction and Building Materials, 2013, 38: 356–364

[27] SchnabelEngineering AssociatesInc. Design Manual for Small RCC Dams, Portland Cement Association. 2003

[28] He Y, Zhang X, Hooton R D, Zhang X. Effects of interface roughness and interface adhesion on new-to-old concrete bonding. Construction and Building Materials, 2017, 151: 582–590

[29] Ha S K, Na S, Lee H K. Bond characteristics of sprayed FRP composites bonded to concrete substrate considering various concrete surface conditions. Composite Structures, 2013, 100: 270–279

[30] Santos D S, Santos P M, Dias-da-Costa D. Effect of surface preparation and bonding agent on the concrete-to-concrete interface strength. Construction and Building Materials, 2012, 37: 102–110

[31] Ma H, Tian Y, Li Z. Interactions between organic and inorganic phases in PA-and PU/PA-modified-cement-based materials. Journal of Materials in Civil Engineering, 2011, 23(10): 1412–1421

[32] Ma H, Li Z. Microstructures and mechanical properties of polymer modified mortars under distinct mechanisms. Construction and Building Materials, 2013, 47: 579–587

[33] Luo D, Lu S, Hu C, Xue Z. Experimental and numerical investigation on interlayer fracture process of roller compacted concrete. Construction and Building Materials, 2022, 342: 127998

[34] Shen M, Zhao Y, Bi J, Wang C, Du B, Zhang K. In situ experimental study on mechanical properties of interlayer in roller compacted concrete (RCC) dam. Construction and Building Materials, 2023, 379: 131268

[35] Maier M, Lees J. Interlayer fracture behaviour of functionally layered concrete. Engineering Fracture Mechanics, 2022, 271: 108672

[36] Gungor A G, Sengun E, Yilmaz Y, Yaman I O. Enhancing bonding performance in two-layer roller-compacted concrete pavements: Bridging laboratory insights with field performance. Construction and Building Materials, 2024, 418: 135469

[37] Rao S K, Sravana P, Rao T C. Investigating the effect of M-sand on abrasion resistance of fly ash roller compacted concrete (FRCC). Construction and Building Materials, 2016, 118: 352–363

[38] Pavan S, Rao S K. Effect of fly ash on strength characteristics of roller compacted concrete pavement. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 2014, 11(6): 4–8

[39] Rao S K, Sravana P, Rao T C. Investigation on pozzolanic effect of fly ash in roller compacted concrete pavement. IRACST-Engineering Science and Technology: An International Journal, 2015, 5(2): 202–206

RIGHTS & PERMISSIONS

Higher Education Press