Aging properties and aging mechanism of activated waste rubber powder modified asphalt binder based on rheological properties and micro-characterization

Abstract

The research and development of high-performance pavement materials has been intensified owing to the demand for long-life pavements. This study is performed to develop a novel pavement material using waste rubber powder, waste lubricating by-product (LBP), and asphalt. Subsequently, the aging properties and aging mechanism of activated waste rubber powder modified asphalt (ARMA) are investigated based on its rheological properties and micro-characterization. The rheological results show that, compared with waste rubber powder modified asphalt (RMA), ARMA offers a higher aging resistance and a longer fatigue life. A comparison and analysis of the rheological aging parameters of ARMA and RMA show that LBP activation diminishes the aging sensitivity of ARMA. The micro-characterization result shows that the aging of ARMA may be caused by the fact that LBP-activated waste rubber powder is more reactive and can form a dense colloidal structure with asphalt. Therefore, the evaporation loss of asphalt light components by heat and the damage to the colloidal structure by oxygen during the aging process are impeded, and the thermal-oxidative aging resistance of ARMA is improved.

Graphical abstract

Keywords

rubber powder modified asphalt / aging / mechanism / rheological / characterization

References

[1] SpeightJ G. Asphalt Materials Science and Technology. Oxford: Elsevier, 2015

[2] Koch C, Georgieva K, Kasireddy V, Akinci B, Fieguth P. A review on computer vision based defect detection and condition assessment of concrete and asphalt civil infrastructure. Advanced Engineering Informatics, 2016, 30(2): 208–210

[3] Wang W, Wang L, Miao Y, Cheng C, Chen S. A survey on the influence of intense rainfall induced by climate warming on operation safety and service life of urban asphalt pavement. Journal of Infrastructure Preservation and Resilience, 2020, 1(1): 4

[4] HuangS CDi BenedettoH. Advances in Asphalt Materials: Road and Pavement Construction. Abington: Woodhead Publishing, 2015

[5] Behnood A, Modiri Gharehveran M. Morphology, rheology, and physical properties of polymer-modified asphalt binders. European Polymer Journal, 2019, 112: 766–791

[6] Diab A, Enieb M, Singh D. Influence of aging on properties of polymer-modified asphalt. Construction & Building Materials, 2019, 196: 54–65

[7] Yildirim Y. Polymer modified asphalt binders. Construction & Building Materials, 2007, 21(1): 66–72

[8] Leng Z, Padhan R K, Sreeram A. Production of a sustainable paving material through chemical recycling of waste PET into crumb rubber modified asphalt. Journal of Cleaner Production, 2018, 180: 682–688

[9] Zhang H, Su M, Zhao S, Zhang Y, Zhang Z. High and low temperature properties of nano-particles/polymer modified asphalt. Construction & Building Materials, 2016, 114: 323–332

[10] Hao G, Huang W, Yuan J, Tang N, Xiao F. Effect of aging on chemical and rheological properties of SBS modified asphalt with different compositions. Construction & Building Materials, 2017, 156: 902–910

[11] Zhang F, Hu C. The research for SBS and SBR compound modified asphalts with polyphosphoric acid and sulfur. Construction & Building Materials, 2013, 43: 461–468

[12] Vamegh M, Ameri M, Chavoshian Naeni S F. Performance evaluation of fatigue resistance of asphalt mixtures modified by SBR/PP polymer blends and SBS. Construction & Building Materials, 2019, 209: 202–214

[13] Dong F, Zhao W, Zhang Y, Wei J, Fan W, Yu Y, Wang Z. Influence of SBS and asphalt on SBS dispersion and the performance of modified asphalt. Construction & Building Materials, 2014, 62: 1–7

[14] Zhang H, Xu G, Chen X, Wang R, Shen K. Effect of long-term laboratory aging on rheological properties and cracking resistance of polymer-modified asphalt binders at intermediate and low temperature range. Construction & Building Materials, 2019, 226: 767–777

[15] Zhang D, Zhang H, Shi C. Investigation of aging performance of SBS modified asphalt with various aging methods. Construction & Building Materials, 2017, 145: 445–451

[16] Liang M, Xin X, Fan W, Sun H, Yao Y, Xing B. Viscous properties, storage stability and their relationships with microstructure of tire scrap rubber modified asphalt. Construction & Building Materials, 2015, 74: 124–131

[17] Wang R, Xu G, Chen X, Zhou W, Zhang H. Evaluation of aging resistance for high-performance crumb tire rubber compound modified asphalt. Construction & Building Materials, 2019, 218: 497–505

[18] Hainin M R, Aziz M A, Adnan A M, Hassan N A, Jaya R P, Liu H Y. Performance of modified asphalt binder with tire rubber powder. Jurnal Teknologi, 2015, 73(4): 55–60

[19] Fakhri M, Amoosoltani E. The effect of reclaimed asphalt pavement and crumb rubber on mechanical properties of roller compacted concrete pavement. Construction & Building Materials, 2017, 137: 470–484

[20] Wen Y, Wang Y, Zhao K, Chong D, Huang W, Hao G, Mo S. The engineering, economic, and environmental performance of terminal blend rubberized asphalt binders with wax-based warm mix additives. Journal of Cleaner Production, 2018, 184: 985–1001

[21] Ding X, Chen L, Ma T, Ma H, Gu L, Chen T, Ma Y. Laboratory investigation of the recycled asphalt concrete with stable crumb rubber asphalt binder. Construction & Building Materials, 2019, 203: 552–557

[22] Ma T, Zhao Y, Huang X, Zhang Y. Characteristics of desulfurized rubber asphalt and mixture. KSCE Journal of Civil Engineering, 2016, 20(4): 1347–1355

[23] Ma J, Sun G, Sun D, Zhang Y, Cannone Falchetto A, Lu T, Hu M, Yuan Y. Rubber asphalt modified with waste cooking oil residue: Optimized preparation, rheological property, storage stability and aging characteristic. Construction & Building Materials, 2020, 258: 120372

[24] Dong D, Huang X, Li X, Zhang L. Swelling process of rubber in asphalt and its effect on the structure and properties of rubber and asphalt. Construction & Building Materials, 2012, 29: 316–322

[25] Zhou Y, Chen J, Zhang K, Guan Q, Guo H, Xu P, Wang J. Study on aging performance of modified asphalt binders based on characteristic peaks and molecular weights. Construction & Building Materials, 2019, 225: 1077–1085

[26] JiJZhaoYXuS. Study on properties of the blends with direct coal liquefaction residue and asphalt. Applied Mechanics and Materials, 2014, 488–489: 316–321

[27] Luo T, Liu Q, Xu Z, Sun X, Zhao S. A novel characterization of furfural-extract oil from vacuum gas oil and its application in solvent extraction process. Fuel Processing Technology, 2016, 152: 356–366

[28] Chen Z, Wang T, Pei J, Amirkhanian S, Xiao F, Ye Q, Fan Z. Low temperature and fatigue characteristics of treated crumb rubber modified asphalt after a long term aging procedure. Journal of Cleaner Production, 2019, 234: 1262–1274

[29] Xiao F, Amirkhanian S, Wang H, Hao P. Rheological property investigations for polymer and polyphosphoric acid modified asphalt binders at high temperatures. Construction & Building Materials, 2014, 64: 316–323

[30] Cao W, Wang Y, Wang C. Fatigue characterization of bio-modified asphalt binders under various laboratory aging conditions. Construction & Building Materials, 2019, 208: 686–696

[31] Xu J, Pei J, Cai J, Liu T, Wen Y. Performance improvement and aging property of oil/SBS modified asphalt. Construction & Building Materials, 2021, 300: 123735

[32] Liu S, Peng A, Zhou S, Wu J, Xuan W, Liu W. Evaluation of the ageing behaviour of waste engine oil-modified asphalt binders. Construction & Building Materials, 2019, 223: 394–408

[33] Geng J, Chen M, Xia C, Liao X, Chen Z, Chen H. Aging characteristics of crumb rubber modified asphalt binder and mixture with regenerating agent. Construction & Building Materials, 2021, 299: 124299

[34] Zhang H, Chen Z, Xu G, Shi C. Evaluation of aging behaviors of asphalt binders through different rheological indices. Fuel, 2018, 221: 78–88

[35] Lei Y, Wang H, Fini E H, You Z, Yang X, Gao J, Dong S, Jiang G. Evaluation of the effect of bio-oil on the high-temperature performance of rubber modified asphalt. Construction & Building Materials, 2018, 191: 692–701

[36] Deef E. Balancing the performance of asphalt binder modified by tire rubber and used motor oil. International Journal of Recent Technology and Engineering, 2019, 8: 5501–5508

[37] Xiang L, Cheng J, Kang S. Thermal oxidative aging mechanism of crumb rubber/SBS composite modified asphalt. Construction & Building Materials, 2015, 75: 169–175

[38] Sirin O, Paul D K, Kassem E. State of the art study on aging of asphalt mixtures and use of antioxidant additives. Advances in Civil Engineering, 2018, 2018: 3428961

[39] Qu X, Liu Q, Guo M, Wang D, Oeser M. Study on the effect of aging on physical properties of asphalt binder from a microscale perspective. Construction & Building Materials, 2018, 187: 718–729

[40] Xu G, Wang H. Molecular dynamics study of oxidative aging effect on asphalt binder properties. Fuel, 2017, 188: 1–10

[41] Wang F, Xiao Y, Cui P, Lin J, Li M, Chen Z. Correlation of asphalt performance indicators and aging degrees: A review. Construction & Building Materials, 2020, 250: 118824

[42] Cui L, Xu J, Cen L, Ren M, Cao F. Molecular engineering and modification of FCC slurry oil residue for improving ageing resistance of high quality paving asphalt. Construction & Building Materials, 2021, 299: 124234

[43] Yin L, Yang X, Shen A, Wu H, Lyu Z, Li B. Mechanical properties and reaction mechanism of microwave-activated crumb rubber-modified asphalt before and after thermal aging. Construction & Building Materials, 2021, 267: 120773

[44] Wang J, Wang T, Hou X, Xiao F. Modelling of rheological and chemical properties of asphalt binder considering SARA fraction. Fuel, 2019, 238: 320–330

[45] Zhang Y, Wei H, Dai Y. Influence of different aging environments on rheological behavior and structural properties of rubber asphalt. Materials (Basel), 2020, 13(15): 3376

[46] Daly W H, Balamurugan S S, Negulescu I, Akentuna M, Mohammad L, Cooper S B III, Cooper S B Jr, Baumgardner G L. Characterization of crumb rubber modifiers after dispersion in asphalt binders. Energy & Fuels, 2019, 33(4): 2665–2679

RIGHTS & PERMISSIONS

Higher Education Press