Shear strength model of the reinforced concrete beams with embedded through-section strengthening bars

Abstract

In this study, finite element (FE) analysis is utilized to investigate the shear capacity of reinforced concrete (RC) beams strengthened with embedded through-section (ETS) bars. Effects of critical variables on the beam shear strength, including the compressive strength of concrete, stiffness ratio between ETS bars and steel stirrups, and use of ETS strengthening system alone, are parametrically investigated. A promising method based on the bond mechanism between ETS strengthening and concrete is then proposed for predicting the shear resistance forces of the strengthened beams. An expression for the maximum bond stress of the ETS bars to concrete is developed. This new expression eliminates the difficulty in the search and selection of appropriate bond parameters from adhesion tests. The results obtained from the FE models and analytical models are validated by comparison with those measured from the experiments. Consequently, the model proposed in this study demonstrates better performance and more accuracy for prediction of the beam shear-carrying capacity than those of existing models. The results obtained from this study can also serve researchers and engineers in selection of the proper shear strength models for design of ETS-strengthened RC beams.

Graphical abstract

Keywords

embedded through-section / strengthening / fiber-reinforced polymer / finite element / shear strength model / bond mechanism

References

[1] Dias S J E, Barros J A O. Shear strengthening of T cross section reinforced concrete beams by near-surface mounted technique. Journal of Composites for Construction, 2008, 12(3): 300–311

[2] Rahal K N, Rumaih H A. Tests on reinforced concrete beams strengthened in shear using near surface mounted CFRP and steel bars. Engineering Structures, 2011, 33(1): 53–62

[3] Chaallal O, Mofidi A, Benmokrane B, Neale K. Embedded through-section FRP rod method for shear strengthening of RC beams: Performance and comparison with existing techniques. Journal of Composites for Construction, 2011, 15(3): 374–383

[4] Dias S J E, Barros J A O. Shear strengthening of RC beams with NSM CFRP laminates: Experimental research and analytical formulation. Composite Structures, 2013, 99: 477–490

[5] Panigrahi A K, Biswal K C, Barik M R. Strengthening of shear deficient RC T-beams with externally bonded GFRP sheets. Construction & Building Materials, 2014, 57: 81–91

[6] Hosen M A, Jumaat M Z, Islam A B M S. Side Near Surface Mounted (SNSM) technique for flexural enhancement of RC beams. Materials & Design, 2015, 83: 587–597

[7] Carter J, Genikomsou A S. Investigation on modeling parameters of concrete beams reinforced with basalt FRP bars. Frontiers of Structural and Civil Engineering, 2019, 13(6): 1520–1530

[8] Bui L V H, Stitmannaithum B. Prediction of shear contribution for the FRP strengthening systems in RC beams: A simple bonding-based approach. Journal of Advanced Concrete Technology, 2020, 18(10): 600–617

[9] Bae S W, Belarbi A. Behavior of various anchorage systems used for shear strengthening of concrete structures with externally bonded FRP sheets. Journal of Bridge Engineering, 2013, 18(9): 837–847

[10] Valerio P, Ibell T J, Darby A P. Deep embedment of FRP for concrete shear strengthening. Proceedings of the Institution of Civil Engineers—Structures and Buildings, 2009, 162(5): 311–321

[11] BarrosJ A ODalfré G MTrombiniEAprileA. Exploring the possibilities of a new technique for the shear strengthening of RC elements. In: Proceedings of International Conference of Challenges Civil Construction (CCC2008). Portugal: University of Porto, 2008

[12] Mofidi A, Chaallal O, Benmokrane B, Neale K W. Experimental tests and design model for RC beams strengthened in shear using the embedded through-section FRP method. Journal of Composites for Construction, 2012, 16(5): 540–550

[13] Breveglieri M, Aprile A, Barros J A O. Shear strengthening of reinforced concrete beams strengthened using embedded through section steel bars. Engineering Structures, 2014, 81: 76–87

[14] Breveglieri M, Aprile A, Barros J A O. Embedded through section shear strengthening technique using steel and CFRP bars in RC beams of different percentage of existing stirrups. Composite Structures, 2015, 126: 101–113

[15] Breveglieri M, Aprile A, Barros J A O. RC beams strengthened in shear using the embedded through-section technique: Experimental results and analytical formulation. Composites. Part B, Engineering, 2016, 89: 266–281

[16] Bui L V H, Stitmannaithum B, Ueda T. Experimental investigation of concrete beams strengthened with embedded through-section steel and FRP bars. Journal of Composites for Construction, 2020, 24(5): 04020052

[17] Rabczuk T, Zi G, Bordas S, Nguyen-Xuan H. A geometrically non-linear three-dimensional cohesive crack method for reinforced concrete structures. Engineering Fracture Mechanics, 2008, 75(16): 4740–4758

[18] RabczukTZi GBordasSNguyen-XuanH. A simple and robust three-dimensional cracking-particle method without enrichment. Computer Methods in Applied Mechanics and Engineering, 2010, 199(37−40): 2437−2455

[19] RabczukTBelytschko T. A three-dimensional large deformation meshfree method for arbitrary evolving cracks. Computer Methods in Applied Mechanics and Engineering, 2007, 196(29−30): 2777−2799

[20] Rabczuk T, Belytschko T. Cracking particles: A simplified meshfree method for arbitrary evolving cracks. International Journal for Numerical Methods in Engineering, 2004, 61(13): 2316–2343

[21] Ren H L, Zhuang X Y, Anitescu C, Rabczuk T. An explicit phase field method for brittle dynamic fracture. Computers & Structures, 2019, 217: 45–56

[22] Goswami S, Anitescu C, Chakraborty S, Rabczuk T. Transfer learning enhanced physics informed neural network for phase-field modeling of fracture. Theoretical and Applied Fracture Mechanics, 2020, 106: 102447

[23] GodatALabossière PNealeK WChaallalO. Behavior of RC members strengthened in shear with EB FRP: Assessment of models and FE simulation approaches. Computers & Structures, 2012, 92–93: 92–93

[24] Godat A, Chaallal O, Neale K W. Nonlinear finite element models for the embedded through-section FRP shear-strengthening method. Computers & Structures, 2013, 119: 12–22

[25] Bui L V H, Stitmannaithum B, Jongvivatsakul P. Comprehensive investigation on bond mechanism of embedded throughsection fiber-reinforced polymer bars to concrete for structural analysis. Journal of Building Engineering, 2020, 29: 101180

[26] Bui L V H, Stitmannaithum B, Ueda T. Simulation of concrete beams strengthened by embedded through-section steel and GFRP bars with newly developed bond model. Journal of Advanced Concrete Technology, 2020, 18(7): 364–385

[27] ADINA. Version 8.5.4. Watertown, MA: ADINA R&D Incorporation. 2009

[28] ANSYS. Version15.0. Canonsburg, PA: Ansys Inc., 2013

[29] Breveglieri M, Barros J A O, Aprile A, Ventura-Gouveia A. Strategies for numerical modeling the behavior of RC beams strengthened in shear using the ETS technique. Engineering Structures, 2016, 128: 296–315

[30] Hamdia K M, Silani M, Zhuang X, He P, Rabczuk T. Stochastic analysis of the fracture toughness of polymeric nanoparticle composites using polynomial chaos expansions. International Journal of Fracture, 2017, 206(2): 215–227

[31] TIS20-2543. Steel Bars for Reinforced Concrete: Round Bars. Bangkok: TISI (Thai Industrial Standards Institute), 2000

[32] TIS24-2548. Steel Bars for Reinforced Concrete: Round Bars. Bangkok: TISI (Thai Industrial Standards Institute), 2003

[33] Hawileh R A. Finite element modeling of reinforced concrete beams with a hybrid combination of steel and aramid reinforcement. Materials & Design, 2015, 65: 831–839

[34] Hognestad E, Hanson N W, McHenry D. Concrete stress distribution in ultimate strength design. ACI Journal Proceedings, 1955, 52(12): 455–479

[35] Willam K J, Warnke E P. Constitutive models for the triaxial behavior of concrete. IABSE Proceedings, 1975, 19: 1–30

[36] Rabczuk T, Zi G. Numerical fracture analysis of prestressed concrete beams. International Journal of Concrete Structures and Materials, 2008, 2(2): 153–160

[37] Rabczuk T, Belytschko T. Application of particle methods to static fracture of reinforced concrete structures. International Journal of Fracture, 2006, 137(1−4): 19–49

[38] RabczukTAkkermann JEiblJ. A numerical model for reinforced concrete structures. International Journal of Solids and Structures, 2005, 42(5−6): 1327−1354

[39] ACI318-08. Building Code Requirements for Structural Concrete and Commentary. Detroit, MI: American Concrete Institute, 2008

[40] Dai J, Ueda T, Sato Y. Development of the nonlinear bond stress–slip model of fiber reinforced plastics sheet–concrete interfaces with a simple method. Journal of Composites for Construction, 2005, 9(1): 52–62

[41] Caro M, Jemaa Y, Dirar S, Quinn A. Bond performance of deep embedment FRP bars epoxy-bonded into concrete. Engineering Structures, 2017, 147: 448–457

[42] Triantafillou T C. Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites. ACI Structural Journal, 1998, 85(2): 107–115

RIGHTS & PERMISSIONS

Higher Education Press 2022