Crushed rocks stabilized with organosilane and lignosulfonate in pavement unbound layers: Repeated load triaxial tests

Abstract

The creation of the new “Ferry-Free Coastal Highway Route E39” in southwest Norway entails the production of a remarkable quantity of crushed rocks. These resources could be beneficially employed as aggregates in the unbound courses of the highway itself or other road pavements present nearby. Two innovative stabilizing agents, organosilane and lignosulfonate, can significantly enhance the key properties, namely, resilient modulus and resistance against permanent deformation, of the aggregates that are excessively weak in their natural state. The beneficial effect offered by the additives was thoroughly evaluated by performing repeated load triaxial tests. The study adopted the most common numerical models to describe these two key mechanical properties. The increase in the resilient modulus and reduction in the accumulated vertical permanent deformation show the beneficial impact of the additives. Furthermore, a finite element model was created to simulate the repeated load triaxial test by implementing nonlinear elastic and plastic constitutive relationships.

Graphical abstract

Keywords

organosilane / lignosulfonate / crushed rocks / pavement unbound layers / repeated load triaxial test / finite element analysis

References

[1] NPRA. The E39 Coastal Highway Route. Available at the website of ‘The E39 Coastal Highway Route’. 2017

[2] Dunham K K. Coastal Highway Route E39—Extreme crossings. Transportation Research Procedia, 2016, 14: 494–498

[3] Gomes Correia A, Winter M G, Puppala A J. A review of sustainable approaches in transport infrastructure geotechnics. Transportation Geotechnics, 2016, 7: 21–28

[4] Riviera P P, Bellopede R, Marini P, Bassani M. Performance-based re-use of tunnel muck as granular material for subgrade and sub-base formation in road construction. Tunnelling and Underground Space Technology, 2014, 40: 160–173

[5] Petkovic G. Recycling in Norwegian conditions. In: Bearing Capacity of Roads, Railways and Airfields—Proceedings of the 5th International Conference on the Bearing Capacity of Roads, Railways and Airfields. Trondheim: Tapir, 2005

[6] Teknologirådet. Norwegian Board of Technology (NBT) | Norway 2030 Archive. Available at the website of Norway 2030. 2012

[7] Barbieri D M, Hoff I, Mork H. Laboratory investigation on unbound materials used in a highway with premature damage. In: Bearing Capacity of Roads, Railways and Airfields—Proceedings of the 10th International Conference on the Bearing Capacity of Roads, Railways and Airfields. Trondheim: Tapir, 2017

[8] NPRA. Norwegian Pavement Design Handbook N200. Version 2018. Oslo: Norwegian Public Roads Administration, 2018

[9] NPRA. Norwegian Pavement Design Handbook N200. Version 2014. Oslo: Norwegian Public Roads Administration, 2014

[10] CEN. Tests for Geometrical Properties of Aggregates. Part 1: Determination of Particle Size Distribution. Sieving Method. Brussels: European Committee for Standardization, 2012

[11] CEN. Tests for Mechanical and Physical Properties of Aggregates. Part 3: Determination of Particle Shape—Flakiness Index. Brussels: European Committee for Standardization, 2012

[12] CEN. Tests for Mechanical and Physical Properties of Aggregates. Part 2: Methods for the Determination of Resistance to Fragmentation. Brussels: European Committee for Standardization, 2010

[13] CEN. Tests for Mechanical and Physical Properties of Aggregates. Part 1: Determination of the Resistance to Wear (Micro-Deval). Brussels: European Committee for Standardization, 2011

[14] Liu J, Zhao S, Mullin A. Laboratory assessment of Alaska aggregates using Micro-Deval test. Frontiers of Structural and Civil Engineering, 2017, 11(1): 27–34

[15] Barbieri D M, Hoff I, Mørk M B E. Mechanical assessment of crushed rocks derived from tunnelling operations. In: The 5th GeoChina International Conference 2018—Civil Infrastructures Confronting Severe Weathers and Climate Changes from Failure to Sustainability. Hangzhou: Springer, 2019, 225–241

[16] Arulrajah A, Mohammadinia A, Horpibulsuk S, Samingthong W. Influence of class F fly ash and curing temperature on strength development of fly ash-recycled concrete aggregate blends. Construction & Building Materials, 2016, 127: 743–750

[17] Behnood A. Soil and clay stabilization with calcium- and non-calcium-based additives: A state-of-the-art review of challenges, approaches and techniques. Transportation Geotechnics, 2018, 17: 14–32

[18] Jiang Y J, Fan L F. An investigation of mechanical behavior of cement-stabilized crushed rock material using different compaction methods. Construction & Building Materials, 2013, 48: 508–515

[19] Mohammadinia A, Arulrajah A, Haghighi H, Horpibulsuk S. Effect of lime stabilization on the mechanical and micro-scale properties of recycled demolition materials. Sustainable Cities and Society, 2017, 30: 58–65

[20] Myre J. The Use of Cold Bitumen Stabilized Base Course Mixes in Norway. Oslo, 2014, 1–14

[21] NPRA. Cold Bitumen Stabilized Base Layers. Oslo: Norwegian Public Roads Administration, 2014

[22] Siripun K, Jitsangiam P, Nikraz H. Characterization analysis and design of hydrated cement treated crushed rock base as a road base material in Western Australia. International Journal of Pavement Research and Technology, 2010, 10: 39–47

[23] Foroutan Mirhosseini A, Kavussi A, Tahami S A, Dessouky S. Characterizing temperature performance of bio-modified binders containing RAP binder. Journal of Materials in Civil Engineering, 2018, 30(8): 04018176

[24] Barbieri D M, Mofid S A, Hoff I, Jelle B P. Nanoscale technology enhancement of crushed rocks’ mechanical properties for pavement applications. In: The 6th International Symposium on Nanotechnology in Construction. Hong Kong, China, 2018

[25] Huang Y, Wang L. Experimental studies on nanomaterials for soil improvement: A review. Environmental Earth Sciences, 2016, 75(6): 497–507

[26] Paul D R, Robeson L M. Polymer nanotechnology: Nanocomposites. Polymer, 2008, 49(15): 3187–3204

[27] Roco M C. Broader societal issues of nanotechnology. Journal of Nanoparticle Research, 2003, 5(3/4): 181–189

[28] Sobolev K, Shah S P. Nanotechnology in construction. In: Proceedings of the 5th International Symposium on Nanotechnology in Construction NICOM5. Chicago: Springer, 2015: 509

[29] Sobolev K. Modern developments related to nanotechnology and nanoengineering of concrete. Frontiers of Structural and Civil Engineering, 2016, 10(2): 131–141

[30] Santoni R L, Tingle J S, Webster S L. Stabilization of silty sand with nontraditional additives. Transportation Research Record: Journal of the Transportation Research Board, 2002, 1787(1): 61–70

[31] Alazigha D P, Indraratna B, Vinod J S, Heitor A. Mechanisms of stabilization of expansive soil with lignosulfonate admixture. Transportation Geotechnics, 2018, 14: 81–92

[32] Barbieri D M, Hoff I, Mørk M B E. Innovative stabilization techniques for weak crushed rocks used in road unbound layers: A laboratory investigation. Transportation Geotechnics, 2019, 18: 132–141

[33] Ghadimi B, Nikraz H. A comparison of implementation of linear and nonlinear constitutive models in numerical analysis of layered flexible pavement. Road Materials and Pavement Design, 2017, 18(3): 550–572

[34] Sun W, Wang L, Wang Y. Mechanical properties of rock materials with related to mineralogical characteristics and grain size through experimental investigation: A comprehensive review. Frontiers of Structural and Civil Engineering, 2017, 11(3): 322–328

[35] Lekarp F, Isacsson U, Dawson A. State of the art. I: Resilient response of unbound aggregates. Journal of Transportation Engineering, 2000, 126(1): 66–75

[36] Lekarp F, Isacsson U, Dawson A. State of the art. II: Permanent strain response of unbound aggregates. Journal of Transportation Engineering, 2000, 126(1): 76–83

[37] Uthus L, Tutumluer E, Horvli I, Hoff I.Influence of grain shape and texture on the deformation properties of unbound aggregates in pavements. International Journal of Pavements, 2007, 6: 75–87

[38] CEN. Unbound and Hydraulically Bound Mixtures. Part 4: Test Methods for Laboratory Reference Density and Water Content. Vibrating hammer. Brussels: European Committee for Standardization, 2003

[39] CEN. Cyclic Load Triaxial Test for Unbound Mixture. Brussels: European Committee for Standardization, 2004

[40] Erlingsson S, Rahman M S, Salour F. Characteristic of unbound granular materials and subgrades based on multi stage RLT testing. Transportation Geotechnics, 2017, 13: 28–42

[41] Hoff I, Arvidsson H, Erlingson S, Houben L J M, Kolisoja P, Schwartz C W. Round robin investigation on the cyclic triaxial test for unbound granular materials. In: Bearing Capacity of Roads, Railways and Airfields-Proceedings of the 7th International Conference on the Bearing Capacity of Roads, Railways and Airfields, BCRRA 2005. Trondheim: Tapir, 2005

[42] Zhalehjoo N, Tolooiyan A, Mackay R, Bodin D. The effect of instrumentation on the determination of the resilient modulus of unbound granular materials using advanced repeated load triaxial testing. Transportation Geotechnics, 2018, 14: 190–201

[43] Hicks R G, Monismith C L. Factors influencing the resilient properties of granular materials. Highway Research Record, 1971, 345: 15–31

[44] Uzan J. Characterization of granular material. Transportation Research Record: Journal of the Transportation Research Board, 1985: 52–59

[45] Uzan J, Witczak M W. The Universal Airport Pavement Design System, Report I of IV: Granular Material Characterization. 1988

[46] Werkmeister S, Dawson A R, Wellner F. Pavement design model for unbound granular materials. Journal of Transportation Engineering, 2004, 130(5): 665–674

[47] Werkmeister S, Dawson A, Wellner F. Permanent deformation behavior of granular materials and the shakedown concept. Transportation Research Record: Journal of the Transportation Research Board, 2005, 1757: 75–81

[48] Gidel G, Hornych P, Chauvin J J, Breysse D, Denis A. A new approach for investigating the permanent deformation behaviour of unbound granular material using the repeated load triaxial apparatus. Bulletin Des Laboratories Des Pont Chaussees, 2001, 233: 5–21

[49] Hoff I, Bakløkk L J, Aurstad J. Influence of laboratory compaction method on unbound granular materials. In: The 6th International Symposium on Pavements Unbound. Nottingham: CRC Press, 2003

[50] Barksdale R D. Laboratory evaluation of rutting in basecourse materials. In: The 3rd Conference on the Structural Design of Asphalt Pavements. London: Cushing-Malloy, 1972, 161–174

[51] Sweere G T H. Unbound Granular Bases for Roads. Delft: University of Delft, 1990

[52] Erlingsson S, Rahman M S. Evaluation of permanent deformation characteristics of unbound granular materials by means of multistage repeated-load triaxial tests. Transportation Research Record: Journal of the Transportation Research Board, 2013, 2369(1): 11–19

[53] Rahman M S, Erlingsson S. Predicting permanent deformation behaviour of unbound granular materials. International Journal of Pavement Engineering, 2015, 16(7): 587–601

[54] Hyde A F L. Repeated Load Triaxial Testing of Soils. London: University of Nottingham, 1974

[55] Shenton M J. Deformation of railway ballast under repeated loading. In: Symposium on Railroad Track Mechanics. New Jersey: Princeton University, 1975

[56] COMSOL. COMSOL Multiphysics 5.3 Reference Manual. Burlington: COMSOL Inc., 2017

[57] Kim M, Tutumluer E, Kwon J. Nonlinear pavement foundation modeling for three-dimensional finite-element analysis of flexible pavements. International Journal of Geomechanics, 2009, 9(5): 195–208

[58] Hornych P, Chazallon C, Allou F, El Abd A. Prediction of permanent deformations of unbound granular materials in low traffic pavements. Road Materials and Pavement Design, 2007, 8(4): 643–666

[59] Chazallon C, Hornych P, Mouhoubi S. Elastoplastic model for the long-term behavior modeling of unbound granular materials in flexible pavements. International Journal of Geomechanics, 2006, 6(4): 279–289

[60] David C T, García-Rojo R, Herrmann H J, Luding S. Hysteresis and creep in powders and grains. Powders Grains, 2005, 2005: 291–294

RIGHTS & PERMISSIONS

Higher Education Press